IBM Cognos COG-635 Certification Test?
Jul 15, 2011it seems that if i want to get IBM Cognos 10 BI OLAP Developer certification i have to pass COG-635 exam. it is said exampdf has released the latest COG-635 study guides.
View 1 Repliesit seems that if i want to get IBM Cognos 10 BI OLAP Developer certification i have to pass COG-635 exam. it is said exampdf has released the latest COG-635 study guides.
View 1 RepliesQuestion re: DIR-655; Hardware ver A4; Firmware version 1.32NA
During bandwidth tests to several sites (principally speedtest.net) I get ping times of 10-11 ms, download speeds of 12+ to 17+ mbps but failure on upload tests using my DIR-655.
When I bypass the 655 and test directly with my cable modem, all (including upload) tests work reliably and consistently.
I have swapped the two ethernet cables involved as well as replacing both with new cables but the results are the same (uploads fail with 655 and work without it)
I have seen several postings over the the last year with this same problem but have never seen any comment from D-Link, or a solution from any reader.
Not that it should have any bearing, but I have TA785GE-128M motherboard and am running Windows 7 (patch current) on COMCAST
is this problem acknowledged by D-Link and is there a solution?
In regards to becoming a Network Technician with the certification. Are there other passes as such that need to be obtained that i could slowly gather up, such as safe pass and so onIm thinking ahead and like to be well prepared.In regards to my CCENT course, thnigs are going pretty well and if all going well, my college is willing to give me a days work experience out side of my current work commitments to gain some crucial experienceHopefully when the time comes and i receive my CCENT qualification i can put experience along side it on my cv aswell as the above mentioned safe passes if needed.
View 3 Replies View RelatedI am wanting to generate a signing request for an ACS 5.3 box to send to a Microsoft CA. Is there anyone out there using a MS CA for eap-tls?
View 1 Replies View RelatedI would like to upload the signed certification to LMS 4.2.2.After checking ( 4. option ) I choosed the 6. option and press "y" for questions and the perl script is freezing.
View 2 Replies View RelatedI want ACS 5 to authenticate the wireless users validating each user with a certificate. The ACS is connected to the AD but, is it possible to do that using user/password from the certificate?, i need to do that with certificate and independant of the AD certificates of each user, so it will be scalable.
View 3 Replies View RelatedI'm currently trying to set up a new infrasturcture with PEAP.
So, i've got redundant CA routers (c1921), an ACS server and 1262 AP's. Everything is working fine and as i want it to.Certificates are autoenrolled and so on, but if the CA root certificate expires, how to tell the AP to get the new root CA cert.
The root-certs are made by auto-rollover, and rolled on the CA router, but I got no change to get this root-cert on the AP.Is there a way to get them in an automated way, like rollover or enrollment?
I'm studying for a Cisco certification and I'm trying to wrap my head around the routing. I understand how routers work for the most part and how the get updates about networks and how many hops away they are, but I don't get what happens when a router doesn't know the path to a network.
View 19 Replies View RelatedRecently i purchased 1 no Cisco router 1941 from vendor but he didn't active Cisco security certification or SMART NET package.
View 2 Replies View RelatedNew firmware for the Linksys E4200 was released this morning that adds certification for DLNA, IPv6 Gold log, and UPnP. It also addresses the Media Server issues that have been identified here in the community.Sept 28, 2011Last Firmware version: 1.0.03 (build 14)- Added supports of Native IPv6 over PPPoE Internet connection when only keep alive option is selected.- Added supports of Native IPv6 on guest network if there are more than two available IPv6 subnets- Added supports of Native IPv6 on Parental Control- Added supports of 3TB Hard drive with NTFS and HFS+ format- Improved firmware upgrade stability- Improved IPv6 WAN performance- Fixed media server unstable issue- Fixed Cisco LED flashing issue- Fixed some minor bugs- DLNA certified- IPv6 Gold logo certified- UPnP certified
View 1 Replies View RelatedIXIA----DUT-----IXIA
| | |
|_______ |________|
DUT has redudant connections to IXIA. Im pumping traffic from IXIA and traffic takes PATH A .. When I shut PATH A, i expect traffic to shift to PATH B within 100ms (example). How do I test this ?
I have an old Pentium 3 PC that I want to test out as a home server. I am thinking of using Linux server is but I don't have any ideas how to do it.
View 4 Replies View RelatedI have upgraded my network service from 2M to 6M per month last week. But the network speed is not so satisfactory. I could hardly feeling its upgrading.Is there any trustful and accurate method or tool to test the network speed?
View 4 Replies View RelatedI've been having problems downloading full ISO's before they're interrupted. There doesn't seem to be any real rhyme or reason to it. Sometimes a 4.1GB ISO will stop at 2GB, other times at 4.0GB. I realize I could run a ping from the time I walk in until the time I leave, but that seems a bit too archaic of a solution.nfortunately, our CTO believes SNMP is too much of a security risk
View 11 Replies View RelatedI know ping and traceroute are commands that test network connectivity. what about netstat and telnet? can they also test network connectivity?
View 4 Replies View RelatedMy Dell Inspiron Win 7 equipped computer cannot connect to the Internet. I have a DSL router that I can wirelessly connect to, but it says no Internet access. I used the manual Intel Wireless Manual Diagnostic Tools to test my system and failed the ping test. Dialog box says "no response, default gateway,DHCP server" and indicates the ping test failed.I have checked my router and it is working nominally; other laptops in my family have Internet access just fine. My Intel Centrino Wireless N 1030 adapter is working fine. I detect no other hardware problems on my laptop.
View 7 Replies View RelatedI did a network test with Passmarks Performancetest. I'm running a 10/100 network with all devices connecting at 100Mb. On Performancetest there are 2 tests to run for Network speed, TCP and UDP. The TCP speed test came back with an average 62000kbps (7.5Mb), and the UDP was 89000kbps (10.8Mb). As I'm running a 100mb network, shouldn't the results of been higher?
View 3 Replies View RelatedTest a destination port if it blocked or not by my ISP
View 8 Replies View RelatedI am currently using Time Warner Cable as my internet provider and I have been experiencing very slow internet connection speeds for the past few weeks. This has happened across multiple laptops and desktops both wireless and wired connections. I have done a ping and tracert test but am unable to read the results.
View 7 Replies View RelatedI have a cable lan connection for internet.i check speedtest.net for the results and it showed.9mbps download speed and .10 mbps upload speed.but when i download something i only get 0.45 mbps speed.Sometimes i get 9mbps but not often.But speedtest.net always shows my speed to be 9mbps.So that makes me guess , that there is actually 9 mbps available.now how do i utilize it.?
View 8 Replies View Relatedi am using mtnl broadband and modem is sam300ax...internet is connet properly..now i want to conect netgear wireless router(wgr61 v9) sothat i can connect internet on another two pcs.i will attach wifi Dlink adptors in another two pcs..i donot how do this? anybody give me step by step process..
View 1 Replies View RelatedPinging 98.137.149.56 and had 100% packet loss; this was suggested in another thread. LAN connected at 100 Mbps BUT cannot access Internet! Windows XP HP desktop; Belkin N Router; Optimum Cablevision - Modem Scientic Atlanta "Webstar"
I am using my iPhone to access Internet.
I travel a lot and use wifi in a lot of different places (hotels, airports, etc.)My apps don't always work and I suspect that in some instances the broadband provider is blocking some of the ports I need.I don't need a port scanner like NMAP since that scans a target IP for listening ports.What I need is a way to figure out whether some firewall between my PC and the Internet is blocking specific UDP or TCP port ranges.
View 2 Replies View RelatedI have a hp desktop with windows 7.I keep having a problem with my internet connection.I have a new router and is working fine with my laptops.My desktop is 6 months old.someone said it could be a faulty wireless card in the desktop.Is their some way I can test the wireless card before taking it back to the store?The store is an hour and a half away.and if its not the wireless card they will charge me a heavy fee.
View 1 Replies View RelatedI've recently purchased a new modem and router made by net gear I've been able to connect to the internet via laptop, cell phone, etc. but my real problem is that my Xbox will not connect through the net work test when I physically do it myself but if my Xbox is off and I reset the modem /router and then turn on the Xbox it connects me but doesn't allow me to play any games or talk to friends, so back to my first problem I test the internet using the Xbox, it connects to the network but not to internet and trows an error reset modem/router 30sec. ICMP error or MTU error I've browsed online for solutions but none are successful I've changed router settings bought an Ethernet cord bought a second more powerful router from net gear nothing is working, any ideas?
View 1 Replies View RelatedI am trying to test and setup some ACL's on a switch, the current setup is:
Core Switch - HP ProCurve 2610-24-PWR
Edge Switch - HP ProCurve 2510-24
VLANS 5, 10, 15, 20, 25, 30
I want to deny access to VLAN 5 from VLAN 20 which is are client VLAN.
I am used to lan testing with QCheck and Passmark's Performance Test (Network Test). But recently I upgraded to a 10 GbE switch (Netgear M7100), and it broke QCheck; basically, QCheck gave me an infinity as the result of my throughput test. Passmark performed fine, but it's just a hassle to use (or at least it's not as straight forward as QCheck).
Is there another free tool for network lan speed tests? Or is there a really cheap tool for it?Let's say I have less than 20 devices to test on.I've already tried Totusoft's lan speed test and find that its free version is useless.I'm having an itch write my own software now, but if it comes to that, I'd rather pay for a cheap software.Spent too much money on upgrading already - switches, servers, and computers)
How to test the aaa on cisco asr 1000 ? I wana test some user account to a cisco acs.
View 5 Replies View RelatedI have my 2Wire AT&T U-Verse router properly set up to forward the port 25565 from my machine. (Incidentally, PortForward.com gives me a blank page when I try to look up how to do this.) However, when I test the port is indeed open ( Open Port Check Tool - Test Port Forwarding on Your Router ), it returns as closed. Yes, I'm running the server software while I run the test. I only have the Windows Firewall, but I ran attempts while the firewall was completely disabled as well as with just the appropriate programs allowed.
View 9 Replies View RelatedI am trying to find the best way to test throughputandwidth over a Satellite connection. I have tried the following tools, but are not getting a stable output:
ttcp (on cisco devices)
iperfjperf
how do I set up a test domain? I'm running Server 2008 std and have not gotten the DNS server configured right. I'm looking for a guide to take me through the process so I can experience success and get the feel of a working LAN.
View 2 Replies View RelatedI want to create a network with a bunch of routers and switches to be used as a test network for company employees to remotely login and learn networking.I don't want this network to interfere with the rest of the network in any way.I am basically trying to create a stub network or a passive network!!
View 4 Replies View RelatedI have a small network of around 5 PCs,I have 8MB shared connection from ISP,so when I run speed test check from one of my PC it returns around 1.76 Mb download and 0.07 Mb Upload Speed,if I connect one of the PC directly to modem and run the test again so can I get 8MB of speed?
View 17 Replies View Related