D-Link DIR-655 :: Upload Test Error Test With Speednet
May 3, 2011
Question re: DIR-655; Hardware ver A4; Firmware version 1.32NA
During bandwidth tests to several sites (principally speedtest.net) I get ping times of 10-11 ms, download speeds of 12+ to 17+ mbps but failure on upload tests using my DIR-655.
When I bypass the 655 and test directly with my cable modem, all (including upload) tests work reliably and consistently.
I have swapped the two ethernet cables involved as well as replacing both with new cables but the results are the same (uploads fail with 655 and work without it)
I have seen several postings over the the last year with this same problem but have never seen any comment from D-Link, or a solution from any reader.
Not that it should have any bearing, but I have TA785GE-128M motherboard and am running Windows 7 (patch current) on COMCAST
is this problem acknowledged by D-Link and is there a solution?
View 14 Replies
ADVERTISEMENT
Nov 19, 2011
I got the AE2500 Dual-Band Wireless-N USB Adapter. It connects just fine but it seems to like to disconnect on me. Mainly seems to do it when playing online games and testing out speed test.net It does "Download" test fine, "Upload" test is iffy. Sometimes I can run the test 1-2 times sometimes three times, but seems to always drop connection on one of the "upload" tests.
View 1 Replies
View Related
May 20, 2011
when doing the downloadupload test in UTorrent program it claims my port is not open (Default 17690). After I plugged my machine directly to the modem (suspect of port forwarding not working), after removing the antivirus I have, and after adding to my firewall inbounds rule regarding to that port, I still fail on the test.
View 1 Replies
View Related
Dec 23, 2012
I keep getting "Speed Test: Error occurred during test." message when I run Streamline speed test on N750DB router. I'm not sure what my download and upload speeds are which is why I went with run a speed test to begin with.
View 17 Replies
View Related
Aug 2, 2011
I have recently set up a MDS9000 san fabric in two locations connected by DWDM. My DWDM links come up fine but I am looking to test this link before we go live. How to test this?
View 1 Replies
View Related
Feb 18, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
Another query regarding diagnostic test and Test DNS Root. It always fails why?
View 4 Replies
View Related
Jan 10, 2013
I have a WLC5508 working fine right now, using IOS 7.3
When I try to do a Link test on some users to check signal quality, noise, etc... I received the error message below
View 6 Replies
View Related
Jan 30, 2013
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.54317n
ISP : century link
How do I test my routers ddns? My computer went down. So, my adsl ip address changed. I caused the modem/router to reboot. But the new ip wasn't sent to the Host (dyndns.org). I had to update my ip manually on [URL].
View 2 Replies
View Related
Feb 4, 2013
Region : Italy
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : Alice (Telecom)
I bought some days ago Tp-Link Wireless Router (Model TL-WR740N - 150 Mbps - Ver 4.23) but I couldn't install it: when I do Easy Setup Assistant, the network status test always fails because of absence of connectivity. I can see that there are some problems by the lights of the router: the WLAN light switches on, as the WAN light and the LAN light, instead of being flashed. I tried to do the installation without cd but, clicking on 192.168.1.1, I didn't find the page to access to web console but the Telecom page of the status of my connexion (nb: it reports that ethernet is unplugged).
View 3 Replies
View Related
Sep 11, 2012
Just did a dot11 radio link test on a point to multipoint 1400 series bridges. how to read the results of the test?
View 9 Replies
View Related
Feb 4, 2013
IXIA----DUT-----IXIA
| | |
|_______ |________|
DUT has redudant connections to IXIA. Im pumping traffic from IXIA and traffic takes PATH A .. When I shut PATH A, i expect traffic to shift to PATH B within 100ms (example). How do I test this ?
View 2 Replies
View Related
Sep 22, 2011
I have an old Pentium 3 PC that I want to test out as a home server. I am thinking of using Linux server is but I don't have any ideas how to do it.
View 4 Replies
View Related
Jun 7, 2012
I have upgraded my network service from 2M to 6M per month last week. But the network speed is not so satisfactory. I could hardly feeling its upgrading.Is there any trustful and accurate method or tool to test the network speed?
View 4 Replies
View Related
Jul 15, 2011
it seems that if i want to get IBM Cognos 10 BI OLAP Developer certification i have to pass COG-635 exam. it is said exampdf has released the latest COG-635 study guides.
View 1 Replies
View Related
Feb 6, 2012
I've been having problems downloading full ISO's before they're interrupted. There doesn't seem to be any real rhyme or reason to it. Sometimes a 4.1GB ISO will stop at 2GB, other times at 4.0GB. I realize I could run a ping from the time I walk in until the time I leave, but that seems a bit too archaic of a solution.nfortunately, our CTO believes SNMP is too much of a security risk
View 11 Replies
View Related
Mar 12, 2013
I know ping and traceroute are commands that test network connectivity. what about netstat and telnet? can they also test network connectivity?
View 4 Replies
View Related
Aug 22, 2012
My Dell Inspiron Win 7 equipped computer cannot connect to the Internet. I have a DSL router that I can wirelessly connect to, but it says no Internet access. I used the manual Intel Wireless Manual Diagnostic Tools to test my system and failed the ping test. Dialog box says "no response, default gateway,DHCP server" and indicates the ping test failed.I have checked my router and it is working nominally; other laptops in my family have Internet access just fine. My Intel Centrino Wireless N 1030 adapter is working fine. I detect no other hardware problems on my laptop.
View 7 Replies
View Related
Jan 10, 2011
I did a network test with Passmarks Performancetest. I'm running a 10/100 network with all devices connecting at 100Mb. On Performancetest there are 2 tests to run for Network speed, TCP and UDP. The TCP speed test came back with an average 62000kbps (7.5Mb), and the UDP was 89000kbps (10.8Mb). As I'm running a 100mb network, shouldn't the results of been higher?
View 3 Replies
View Related
Aug 3, 2011
Test a destination port if it blocked or not by my ISP
View 8 Replies
View Related
Oct 7, 2012
I am currently using Time Warner Cable as my internet provider and I have been experiencing very slow internet connection speeds for the past few weeks. This has happened across multiple laptops and desktops both wireless and wired connections. I have done a ping and tracert test but am unable to read the results.
View 7 Replies
View Related
May 21, 2012
I have a cable lan connection for internet.i check speedtest.net for the results and it showed.9mbps download speed and .10 mbps upload speed.but when i download something i only get 0.45 mbps speed.Sometimes i get 9mbps but not often.But speedtest.net always shows my speed to be 9mbps.So that makes me guess , that there is actually 9 mbps available.now how do i utilize it.?
View 8 Replies
View Related
Mar 19, 2011
i am using mtnl broadband and modem is sam300ax...internet is connet properly..now i want to conect netgear wireless router(wgr61 v9) sothat i can connect internet on another two pcs.i will attach wifi Dlink adptors in another two pcs..i donot how do this? anybody give me step by step process..
View 1 Replies
View Related
Nov 17, 2012
Pinging 98.137.149.56 and had 100% packet loss; this was suggested in another thread. LAN connected at 100 Mbps BUT cannot access Internet! Windows XP HP desktop; Belkin N Router; Optimum Cablevision - Modem Scientic Atlanta "Webstar"
I am using my iPhone to access Internet.
View 10 Replies
View Related
Nov 23, 2011
I travel a lot and use wifi in a lot of different places (hotels, airports, etc.)My apps don't always work and I suspect that in some instances the broadband provider is blocking some of the ports I need.I don't need a port scanner like NMAP since that scans a target IP for listening ports.What I need is a way to figure out whether some firewall between my PC and the Internet is blocking specific UDP or TCP port ranges.
View 2 Replies
View Related
Aug 24, 2011
I have a hp desktop with windows 7.I keep having a problem with my internet connection.I have a new router and is working fine with my laptops.My desktop is 6 months old.someone said it could be a faulty wireless card in the desktop.Is their some way I can test the wireless card before taking it back to the store?The store is an hour and a half away.and if its not the wireless card they will charge me a heavy fee.
View 1 Replies
View Related
Aug 11, 2012
I've recently purchased a new modem and router made by net gear I've been able to connect to the internet via laptop, cell phone, etc. but my real problem is that my Xbox will not connect through the net work test when I physically do it myself but if my Xbox is off and I reset the modem /router and then turn on the Xbox it connects me but doesn't allow me to play any games or talk to friends, so back to my first problem I test the internet using the Xbox, it connects to the network but not to internet and trows an error reset modem/router 30sec. ICMP error or MTU error I've browsed online for solutions but none are successful I've changed router settings bought an Ethernet cord bought a second more powerful router from net gear nothing is working, any ideas?
View 1 Replies
View Related
Jan 26, 2012
I am trying to test and setup some ACL's on a switch, the current setup is:
Core Switch - HP ProCurve 2610-24-PWR
Edge Switch - HP ProCurve 2510-24
VLANS 5, 10, 15, 20, 25, 30
I want to deny access to VLAN 5 from VLAN 20 which is are client VLAN.
View 6 Replies
View Related
Jun 30, 2013
I am used to lan testing with QCheck and Passmark's Performance Test (Network Test). But recently I upgraded to a 10 GbE switch (Netgear M7100), and it broke QCheck; basically, QCheck gave me an infinity as the result of my throughput test. Passmark performed fine, but it's just a hassle to use (or at least it's not as straight forward as QCheck).
Is there another free tool for network lan speed tests? Or is there a really cheap tool for it?Let's say I have less than 20 devices to test on.I've already tried Totusoft's lan speed test and find that its free version is useless.I'm having an itch write my own software now, but if it comes to that, I'd rather pay for a cheap software.Spent too much money on upgrading already - switches, servers, and computers)
View 10 Replies
View Related
Dec 15, 2012
How to test the aaa on cisco asr 1000 ? I wana test some user account to a cisco acs.
View 5 Replies
View Related
Dec 25, 2011
first one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying Code:
View 6 Replies
View Related
Oct 25, 2011
I have my 2Wire AT&T U-Verse router properly set up to forward the port 25565 from my machine. (Incidentally, PortForward.com gives me a blank page when I try to look up how to do this.) However, when I test the port is indeed open ( Open Port Check Tool - Test Port Forwarding on Your Router ), it returns as closed. Yes, I'm running the server software while I run the test. I only have the Windows Firewall, but I ran attempts while the firewall was completely disabled as well as with just the appropriate programs allowed.
View 9 Replies
View Related
Jun 15, 2012
I am trying to find the best way to test throughputandwidth over a Satellite connection. I have tried the following tools, but are not getting a stable output:
ttcp (on cisco devices)
iperfjperf
View 3 Replies
View Related
Jan 17, 2012
how do I set up a test domain? I'm running Server 2008 std and have not gotten the DNS server configured right. I'm looking for a guide to take me through the process so I can experience success and get the feel of a working LAN.
View 2 Replies
View Related
