Commands To Test Network Connectivity

Mar 12, 2013

I know ping and traceroute are commands that test network connectivity. what about netstat and telnet? can they also test network connectivity?

View 4 Replies


ADVERTISEMENT

Network Connectivity Outage Test?

Feb 6, 2012

I've been having problems downloading full ISO's before they're interrupted. There doesn't seem to be any real rhyme or reason to it. Sometimes a 4.1GB ISO will stop at 2GB, other times at 4.0GB. I realize I could run a ping from the time I walk in until the time I leave, but that seems a bit too archaic of a solution.nfortunately, our CTO believes SNMP is too much of a security risk

View 11 Replies View Related

D-Link DIR-655 :: Upload Test Error Test With Speednet

May 3, 2011

Question re:  DIR-655; Hardware ver A4; Firmware version 1.32NA

During bandwidth tests to several sites (principally speedtest.net) I get ping times of 10-11 ms, download speeds of 12+ to 17+ mbps but failure on upload tests using my DIR-655.

When I bypass the 655 and test directly with my cable modem, all (including upload) tests work reliably and consistently.

I have swapped the two ethernet cables involved as well as replacing both with new cables but the results are the same (uploads fail with 655 and work without it)

I have seen several postings over the the last year with this same problem but have never seen any comment from D-Link, or a solution from any reader.

Not that it should have any bearing, but I have TA785GE-128M motherboard and am running Windows 7 (patch current) on COMCAST

is this problem acknowledged by D-Link and is there a solution?

View 14 Replies View Related

How To Test Network Speed

Jun 7, 2012

I have upgraded my network service from 2M to 6M per month last week. But the network speed is not so satisfactory. I could hardly feeling its upgrading.Is there any trustful and accurate method or tool to test the network speed?

View 4 Replies View Related

Cisco :: Find The Commands To Setup A VOIP Network?

Nov 16, 2011

I want to setup a voip network, there's going to be 3 switches connected to a Cisco CME router, my problem is I can't find information on how to configure it.

View 1 Replies View Related

Network Speed Test Results?

Jan 10, 2011

I did a network test with Passmarks Performancetest. I'm running a 10/100 network with all devices connecting at 100Mb. On Performancetest there are 2 tests to run for Network speed, TCP and UDP. The TCP speed test came back with an average 62000kbps (7.5Mb), and the UDP was 89000kbps (10.8Mb). As I'm running a 100mb network, shouldn't the results of been higher?

View 3 Replies View Related

Networking :: 10 GbE Network Test M7100

Jun 30, 2013

I am used to lan testing with QCheck and Passmark's Performance Test (Network Test). But recently I upgraded to a 10 GbE switch (Netgear M7100), and it broke QCheck; basically, QCheck gave me an infinity as the result of my throughput test. Passmark performed fine, but it's just a hassle to use (or at least it's not as straight forward as QCheck).

Is there another free tool for network lan speed tests? Or is there a really cheap tool for it?Let's say I have less than 20 devices to test on.I've already tried Totusoft's lan speed test and find that its free version is useless.I'm having an itch write my own software now, but if it comes to that, I'd rather pay for a cheap software.Spent too much money on upgrading already - switches, servers, and computers)

View 10 Replies View Related

Servers :: Add Machines To New Test Network Domain

Jan 17, 2012

how do I set up a test domain? I'm running Server 2008 std and have not gotten the DNS server configured right. I'm looking for a guide to take me through the process so I can experience success and get the feel of a working LAN.

View 2 Replies View Related

Home Network :: Internet Speed Test To Get 8 Mb Again

Jul 28, 2011

I have a small network of around 5 PCs,I have 8MB shared connection from ISP,so when I run speed test check from one of my PC it returns around 1.76 Mb download and 0.07 Mb Upload Speed,if I connect one of the PC directly to modem and run the test again so can I get 8MB of speed?

View 17 Replies View Related

Network Diagnose Test - DNS Server Isn't Responding

Jan 15, 2011

I have been having an issue with my system recently. When online I will be browsing and my connection will be knocked off. The vodafone page will come out showing connect and diagonise tabs. I did a computer network diagnostic check and it says: "DNS server isn't responding"

View 4 Replies View Related

Cisco Switching/Routing :: 6500 - Commands To Get Input For Network Documentation?

Sep 15, 2012

What are recommended commands to get input for network documentation (for disaster recovery)?
 
I've got 6500 with these modules: WS-SVC-FWM-1,
WS-SVC-IDSM-2, VS-S720-10G, WS-X6704-10GE, WS-X6748-SFP and dozens of WS-C3750E-48TD in couple of buildings.
 
So far I have these commands: Code...

View 3 Replies View Related

Cisco LAN :: 2024 Switch / SF300 - Building Test Network

Sep 24, 2012

I have been put in charge of getting a failover cluster up and runing for SQL AlwaysOn. My equipment is a Cisco SF300-24 and a Cisco 2024 smartswitch. Now I am really new at this since my CCNA class has not yet started but I am trying to get a headstart. What I need to do is split the network up into 2 vlans to represent my data center, and the network oporation center. Ports 1,2,and 3 will be my DC; 11 and 12 will be my NOC. I need to learn how to get those two vlans to communicate. trunk? how? I need the computers to communicate flawlessly.  I would rather use the Cisco CLI and not the GUI, google is coming up with nothing descriptive.

View 14 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR740N - Network Status Test Failed

Feb 4, 2013

Region : Italy
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : Alice (Telecom)

I bought some days ago Tp-Link Wireless Router (Model TL-WR740N - 150 Mbps - Ver 4.23) but I couldn't install it: when I do Easy Setup Assistant, the network status test always fails because of absence of connectivity. I can see that there are some problems by the lights of the router: the WLAN light switches on, as the WAN light and the LAN light, instead of being flashed. I tried to do the installation without cd but, clicking on 192.168.1.1, I didn't find the page to access to web console but the Telecom page of the status of my connexion (nb: it reports that ethernet is unplugged).

View 3 Replies View Related

Network Monitoring Software That Would Monitors Constant Network Connectivity

Mar 25, 2011

Anu network monitoring software that would monitors constant network connectivity? I am working with a company who uses an Access database that checks members in and out of a gym. 6-8 people work in the database at any given time. Several times a day the users will get a network error and they have to force the database to close. Sometimes this happens to all of the users and sometimes to just certain ones. I believe the problem lies with the database (due to poor programming) but I want to monitor the network connectivity to see if and when the network connection is dropped and determine if that corresponds with when users begin seeing network errors in the database.

View 4 Replies View Related

Limited / No Connectivity To Network

Jan 25, 2013

I got this message and I went up to the " Start-Run_CMD-IPCONFIG and this is what I got Ethernet adapter Local Area Connection Media State....... Media Disconnected,Ethernet adapter Wireless Network Connection

View 1 Replies View Related

Limited Connectivity On Network?

Jan 30, 2012

I usually bring my laptop to classes to do homework during my free period and it connects through ethernet no problem. Today, randomly it says theres limited connectoin (no internet connection), but there's numerous other people here with laptops who are connected through the ethernet or wireless network, and their having no problems. I've already tried shutting my computer down and that didn't work, and since this is a school, the internet connection has to be steady, etc. What can I do to fix this?Some details about the laptop[CODE]

View 7 Replies View Related

Limited Or No Connectivity On Network?

Feb 5, 2013

I am trying to share my internet conncetion with another computer. I am using a d-link switch. but I keep getting a limited or no connectivity message.

View 10 Replies View Related

Limited Connectivity On 1 Particular Network?

Apr 14, 2011

I recently switched my laptop over from XP to Vista Home Basic and since then I have not been able to connect to the wireless network at my parents' home. The strange thing is that I've had no problem connecting to other wireless networks (at my own home, at work, etc). n their network, I get a message that says "taking longer than usual to connect to network". Then, it eventually connects but leaves me with "limited connectivity"....and I can't access the internet.I had no problem connecting to their network on that laptop when I had XP and no other computers are having this problem with their network.

View 4 Replies View Related

Limited Connectivity In Network And Sharing

Mar 11, 2011

i have a mobile card that is shared with my ps3 via ethernet cord so i can go online but one day it stopped working and when i plug in my ethernet cord, in network and sharing center another connection thing pops up and its an unidentified network (which is the ps3) but next to the access, it says limited connectivity and when i go in to status it says ipv4: limited. I used to be able to go online on the ps3 but now ever since it said limited connectivity it has stopped me from going online on my ps3,also when i go into internet connection settings on my ps3,i look back on network and sharing and the ps3 connection disapears, im not very smart with computers and stuff so could you dumb it down for me and provide steps on how to get it back to normal?

View 14 Replies View Related

Unidentified Network And Local Connectivity

Jun 21, 2012

My wireless adaptor is preventing me from connecting to the internet at home, it enables to me o find the router and type in a password but only shows " unidentified network and local connectivity" with no access to the internet. When connecting via LAN, i am able to surf the internet. i have tried a full system restore, update drivers , enable and disable drivers but still nothing

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft� Windows Vista� Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Celeron(R) CPU 900 @ 2.20GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 1
RAM: 3032 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1292 Mb
Hard Drives: C: Total - 227472 MB, Free - 200337 MB; S: Total - 1499 MB, Free - 1440 MB;
Motherboard: Advent, Roma
Antivirus: None

View 10 Replies View Related

Limited Connectivity With Wireless Network?

Jan 6, 2011

I've just got a new laptop and I have been unable to connect it to our wireless home netowrk.I've tried disabling my firewall, resetting our router, etc. but to no avail.this is the info i got when i did a command prompt (but i have no idea what it means=p)[CODE]

View 11 Replies View Related

Wireless Network - Limited Or No Connectivity

Dec 20, 2012

I've suddenly been unable to connect to my wireless network and this is the sequence of events leading to the problem. (Currently using a friend's computer). My chrome browser got hijacked by the search conduit virus. So, I cleaned it with AdW cleaner. My internet connection was ok then. After that, I ran ccleaner and cleared the registry. Now, I find that I have trouble even connecting to my wireless - it says limited connectivity or no connectivity. The other comp's in my house can connect to the internet fine. I've checked and resetted my network adapter. It is working, but still can't connect. I restored all my registry but still it doesn't solve the problem.

View 10 Replies View Related

Wireless :: Computer Will Not Get Connectivity Through Network

Dec 27, 2011

My computer will not get computer connectivity through wireless. If I hook the ethernet cable in it does just fine. When I ping the router it sends and receives just fine. I get connection to the intranet/server just not the internet. I try to ping [URL]and it receives b/w 2 and 3 packets at terrible speeds. I have another computer hooked up to the same network that does just fine.

View 3 Replies View Related

Wireless Network Connectivity On An IPad?

Dec 22, 2012

We just moved and had our internet service connected at the new house using the same service provider, wireless router and network we had at the old house. My PC can access the internet fine, but my wife's iPad cannot.

View 5 Replies View Related

Unidentified Network - Limited Connectivity?

Aug 20, 2011

I have been using an Unidentified network for free internet connection where I live for sometime. I do not have access to the router or anything. But suddenly internet has stopped working and it states Limited Connectivity.I have tried few things like rebooting, disabling and and then again enabling the status of the connection, etc without any luck.

View 4 Replies View Related

Unidentified Network - Local Only / Limited Connectivity

Jul 9, 2012

I had a tech from Comcast come out but couldn't figure it out. The tech said it could be my router but tried a different one and still nothing. The network, for me, is listed as "Unidentified" and the connection switches between Local Only and Limited Connectivity. It also says I am connected to my network with excellent strength. If I plug the router directly into the laptop it still doesnt work.

View 10 Replies View Related

Share Network Connectivity From Desktop To Laptop

Apr 16, 2012

i have my desktop computer with a broadband wireless connection. i just want to know how to share internet connection with a laptop. what accessories should i brought and softwares that is needed so that my desktop and laptop will share in internet connection.

View 5 Replies View Related

Multi-WAN Network Suddenly Loses Connectivity

May 21, 2011

This is my network topology. Sometimes it just suddenly loses conenctivity or traffic for unknown reasons, like the internet hangs for much time or maybe some routers just stop responding, even restarting ! Do you think there should be a Multi-WAN router that could take 4 WAN lines and give one LAN to plug at a switch for a better performance ?I know that my setup is wrong, give me your opinion about it and how to fix it .

View 1 Replies View Related

Virtual PC And Windows XP Mode Network Connectivity

Jun 17, 2011

I have 64bit Windows7 Professional OS, and have installed Windows XP Mode, I have a wireless and ethernet-capable Router. My HP PC has both wireless and ethernet connection capability.When running Windows 7 alone, the Internet access is connected by wireless to the Router, and runs well but when I start Windows XP Mode, the Intel 21140-based PCI Fast Ethernet, complains if the Ethernet Cable is not plugged in to the Router.When I plug it in, I still get no Internet connectivity, the error is Windows cannot obtain an IP Address. How can I have the wireless and ethernet connectivity co-exist together or separately when required.

View 5 Replies View Related

Limited Connectivity Wireless Network Vista

Jan 23, 2011

just moved into a new house and cannot connect to the wireless network. My housemate have no problem connecting to the internet via the wireless network. Her notebook is running on Win XP; mine is Vista. I tried manually setting the IP address but it still didn't work.

View 7 Replies View Related

No Internet Connectivity / PC Doesn't Show Up On Network

Jan 15, 2012

Every once in a while when logging into Windows (7 Ultimate 32 bit) My PC decides it couldn't find a network connection, usually restarting the computer solved the problem, however now I have seemed to permanently be stuck on the "identifying" stage of my LAN connection. My mobo is an Asrock p67 extreme, the network adapter is a realtek pcie family card.Now I know it is not my modem since I can connect on my other PC in the living room, I verified this with a phone call to my ISP, they couldn't see my PC connected to the network but could see the other one.It is not the Ethernet cords, I switched them and even used a new one. I tried rolling back, installing updated and installing factory drivers for my network card, no change.

I tried turning off the PC, disconnected the power cord, discharged it, left everything off/ disconnected for 30 minutes and reattached, powered on, no change.I made sure my DHCP was on and that my PC was set to automatically retrieve IP/DNS.I even bought a new Ethernet card, installed it and I still can't connect, so its not the realtek card.I can't even access my modem using its UP address, 192.168.2.1 (Bell 2wire) but I can on my 2nd PC, it sees all other devices, PS3 /Smartphones but not my PC.

View 19 Replies View Related

Windows 7 Cannot Identify Network And Get Limited Connectivity?

Oct 31, 2012

I'm running windows7 and I have problem with my network. When I connect to the router it can detect the router but it cannot identified the network and get limited connectivity. I have tried using wireless and LAN connection and it result the same problem.

View 1 Replies View Related

Limited Or No Connectivity On Local Area Network?

May 13, 2011

I keep getting this pop up message that says "local area network limited or no connectivity". It appears every 20-30 seconds and drops my internet connection. When I click on the message and opens up the connection box, it states it's functioning properly.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved