TP-Link ADSL2+ Wireless :: TD-W8980 Test DNS Root
Feb 18, 2013Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
Another query regarding diagnostic test and Test DNS Root. It always fails why?
ADVERTISEMENT
TP-Link ADSL2 Wireless :: TD-W8980 - Lost Access To Logon Page
Mar 20, 2013Region : UnitedKingdom
Model : TD-W8980
Hardware Version : V1
Firmware Version : 2013 firmware update
ISP : PlusNet
I changed the local port to 8080 for accessing the web logon page (i.e. 192.168.1.1) instead of its default port 80.
[code]....
TP-Link ADSL2+ Wireless :: TD-W8980 Port 7547 TCP Open By Default
Feb 18, 2013Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.5 v000e.0 Build 121225 Rel.42874n
ISP :
Just checked and port 7547 which is used for CWMP is open by default even if the settings are showing disabled. Try http://"external IP address":7547
TP-Link ADSL2+ Wireless :: W8980 Dropping Wireless Connection?
Apr 14, 2013Region : Ireland
Model : TD-W8980
Hardware Version : V1
Firmware Version : 0.6.0 0.6 v000 build 130303 rel. 38108n
ISP : Eircom
Bought this adsl router on Friday and since then I have been experiencing random frequent wireless dropouts, router appears to reboot at this point too, Internet drops out too. Wireless drops as I hear the beep from my airplay speaker reconnecting. Any one have these issues too, tired changing channels, then back to auto again, still no joy.
TP-Link ADSL2+ Wireless :: TD-W8960N / How To Test Routers Ddns
Jan 30, 2013Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.54317n
ISP : century link
How do I test my routers ddns? My computer went down. So, my adsl ip address changed. I caused the modem/router to reboot. But the new ip wasn't sent to the Host (dyndns.org). I had to update my ip manually on [URL].
Cisco Wireless :: 1400 - Equipment Cannot Bridge To Other Root Or Not-root Mode
May 3, 2013We have a problem with a Cisco 1400 Bridge. This equipment can not bridge to the other root or not root mode. I can see a message "Interface Dot11Radio0 Radio transmit power out of range" and the MAC Address of Dot11Radio0 appears with 0000.0000.0000.I set the local power to 18 but the MAC Address is still in 0000.0000.0000.
View 1 Replies View RelatedCisco Wireless :: 1300 Bridges Root And Non Root Can Associate / Ping Each Other
Oct 18, 2011i got the problem with 1300 bridges,root bridge with omni antenna and non root with sector antenna , it can associate and can pin each other , but whenever i try to browse several web pages its get timed out and radio was down.
View 5 Replies View RelatedD-Link DIR-655 :: Upload Test Error Test With Speednet
May 3, 2011Question re: DIR-655; Hardware ver A4; Firmware version 1.32NA
During bandwidth tests to several sites (principally speedtest.net) I get ping times of 10-11 ms, download speeds of 12+ to 17+ mbps but failure on upload tests using my DIR-655.
When I bypass the 655 and test directly with my cable modem, all (including upload) tests work reliably and consistently.
I have swapped the two ethernet cables involved as well as replacing both with new cables but the results are the same (uploads fail with 655 and work without it)
I have seen several postings over the the last year with this same problem but have never seen any comment from D-Link, or a solution from any reader.
Not that it should have any bearing, but I have TA785GE-128M motherboard and am running Windows 7 (patch current) on COMCAST
is this problem acknowledged by D-Link and is there a solution?
Cisco :: Working Configuration Between Two BR1310s In Root And Non-Root Mode
Jul 18, 2011Any working configuration between two BR1310's in Root/Non-root mode? The documentation is vary vague and i can't find anything more secure than WEP. Is it possible to use WPA with radius authentication?
View 1 Replies View RelatedCisco Wireless :: Associate Non-root Bridge Model 1310 To Root Bridge Model 1400?
Apr 24, 2012Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?
View 7 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8970 - TP-LINK USB Printer Controller Is Causing BSOD?
Apr 12, 2013Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
TP-Link ADSL2+ Wireless :: TD-W8968 Virtual Server Link Missing Under Nat Menu
Mar 3, 2013Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
Cisco Wireless :: WLC 5508 - Link Test Fails?
Jan 10, 2013I have a WLC5508 working fine right now, using IOS 7.3
When I try to do a Link test on some users to check signal quality, noise, etc... I received the error message below
D-Link DIR-655 :: Installing Files In The Root Directory Of Mac Hard Drive?
Apr 4, 2011This is troubling and I don't know why it is happening. For some odd reason files seemingly related to my DIR-655 are being put in the root directory of my hard drive on my Power Mac G5 running Leopard 10.5.8. Two preference files and a folder named ''D-Link'' and another folder named ''Shareport.''Why is this happening? I have given D-Link/DIR-655 no access to my hard drive.Furthermore, why this is only happening on that machine while my MacBook Pro running Snow Leopard 10.6.7 is not being ''invaded.''
View 12 Replies View RelatedTP-Link 150Mbps Wireless :: TL-WR740N - Network Status Test Failed
Feb 4, 2013Region : Italy
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : Alice (Telecom)
I bought some days ago Tp-Link Wireless Router (Model TL-WR740N - 150 Mbps - Ver 4.23) but I couldn't install it: when I do Easy Setup Assistant, the network status test always fails because of absence of connectivity. I can see that there are some problems by the lights of the router: the WLAN light switches on, as the WAN light and the LAN light, instead of being flashed. I tried to do the installation without cd but, clicking on 192.168.1.1, I didn't find the page to access to web console but the Telecom page of the status of my connexion (nb: it reports that ethernet is unplugged).
Cisco Wireless :: Results From Dot11 Link Test On 1400 Bridges?
Sep 11, 2012Just did a dot11 radio link test on a point to multipoint 1400 series bridges. how to read the results of the test?
View 9 Replies View RelatedTP-Link ADSL2+ Wireless :: Using A TD-W8970 With A NAS?
Feb 28, 2013Region : Australia
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Im having issues setting up port forwarding with my Synology NAS.
My house is all connected via network cable, going to a main 24-port switch, which is connected to a Modem/Router (TP-LINK in this case). I can access the NAS from anywhere on my home network, send and receive is fine. I previously used a Billion modem/router in the same config and it all worked fine.
The problem is that when going through the Synology setup, it fails to see the tp-link. So therefore I cannot run its port forwarding program to setup all my ports. Which in turn the NAS can't access the internet. I have started going through the port-forward setting on the router interface, and manually entered the ports - i realized that I'm limited to the number of ports i'm allowed to open! I have also run a port testing program, some are successfully opened the others are not.
Is there some button i need to check or switch on the modem?
TP-Link ADSL2+ Wireless :: Can't Connect With TD-W8970
Feb 25, 2013Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : TD-W8970_V1_130201
I just bought online a brand new TD-W8970 modem/router but I'm in trouble with getting ADSL working.I set up a PPPoE connection with the settings from my ISP but the ADSL Led on the device is solid OFF and in the Admin section it says DSL Status: Not Connected.
[code]...
TP-Link ADSL2+ Wireless :: TD-W8970 - NAS Not Being Seen On Network
Apr 16, 2013Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP : Virgin
I've just replaced my aging ZyXel Wireless Router with a TD-W8970 which connects to the internet with no problems whatsoever. However, I have an ethernet connected Western Digital MyBookLive NAS which is happily allocated an IP addess but does not show up on my network on my PC (Windows Vista - fully patched). A usb connected pen drive and exactly the same. Am I missing something blindingly obvious? On the ZyXel the NAS worked with no problems whatsoever.
The problem with the NAS was my internet security Bitdefender. For some reason, on installing the TP-W8970, it switched my firewall status to public from home/office. Corrected that and the NAS can now be seen over the network. This does not fix the USB attached pen drive not being seen problem though.
TP-Link ADSL2+ Wireless :: Why TD-W8968 Use Two Channels
Apr 17, 2013Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
According to inSSIDer the router seems to be using two wifi channels (10+6) and inSSIDer is recommending to move to a standard channel (1,6,11).
TP-Link ADSL2+ Wireless :: W8960N Need To Add A USB HDD Server
Nov 8, 2012Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : BT Broadband
Just got myself a new Modem/Router (TD-W8960N), and it wasn't until I had it all up and running that I realised it didn't have USB port on the back.Anyways, I was wondering how I could go about fixing this? I stumbled upon this (TP-Link TD-8817) on Amazon and wasn't sure if I could attach this to it in bridged mode or something. This has the USB socket I need. If this was all I needed, how do they connect together? I have a BT connection btw.Also, I have a Justop Android 4.0 TV Box (media player). Would this be able to see the HDD for streaming movies.
TP-Link ADSL2+ Wireless :: TD-W8901G - Cannot Access Some Url
Jan 12, 2013Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version :
ISP :
problem with filtering
Region : Syria
Model : TD-W8901G
ver 6.0
54Mbps wireless G ADSL2+:
I used the url filter utility inside the router program. I put some url for example www.google.com, I wanted to try the filtering cababilty, Later I deleted all these adresses , but unfortunatley it keeps telling me the following message: "The system returned: (110) Connection timed out The remote host or network may be down. Your cache administrator is webmaster@proxy1."
Using TP-LINK Wireless ADSL2+ Router As Relay Unit?
Jan 10, 2012I use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost). I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company. Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?
View 3 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8961ND Doesn't Assign IP To PCs Through Another AP
Apr 1, 2013Region : Spain
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120524 Rel.05221
ISP :
linksys1.jpg
I have wifi at home this link installed.
192.168.1.1 is a TD-W8961ND
192.168.1.4 is a linksys wrtt54gl
And I have two problems.
1) I can not see any desktops in my local net, and with old router I could see all, for example (diskstation, dm800, etc...) In my macbook air I can not see my NAS Synology and with old router I do.
2) All PCs that are conected to 192.168.1.4 have not IP. and DHCP in TD-W8961ND is activated.
Tp-link Adsl2 Wireless :: Td-w8151n Can't Connect To Net From Wifi
May 7, 2013Region : India
Model : TD-W8151N
Hardware Version : V3
Firmware Version : 120530
ISP : BSNL
Net is working smoothly from LAN, but no success on wifi. Over wi-fi, I can connect to router but cannot access net.
TP-Link ADSL2+ Wireless :: W8961ND Firmware Will Not Update?
Mar 15, 2013Region : Argentina
Model : TD-W8968
Hardware Version : V1
Region : UnitedKingdom
Firmware Version : 101029
ISP : TalkTalk
I have version 1.1 and d/l'd firmware 111125. The upgrade ran successfully to 100% and then I got the login screen again. However after checking, then restarting to factory default the version displayed was still the old one
TP-Link ADSL2+ Wireless :: TD-W8960N / URL Filter Is Not Working?
Feb 7, 2013Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG
URL Filter not working
Region : Australia
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG
Cannot get the URL filter to work Just upgraded to latest Firmware but that didn't work?
URL List Type: Deny Allow Disable
Address Port Remove
[URL]
TP-Link ADSL2+ Wireless :: 42LM640S / LG Smart TV Cannot Connect
Mar 12, 2013Model : TD-W8951ND
Hardware Version : Not Clear
Firmware Version :
ISP : Metronet BPL
I connect to the internet by BPL modem on electricity , for using my modem's wireless feature ı have to close DHCP and use modem in bridge mode, otherwise I can't use wireless, And my problem is connecting to the internet with my LG 42LM640S smart tv using wireless, When I talk with LG techinal service they came and try to connect tv to the internet with using their android phone's hotspot feature, my tv connect with phone's hotspot feature to the internet,So they said that "you have to change tp link modem's encoding system?Now it's encoding mode in WPA enconding system :S But whwen ı shut down encoding wireless tv didn't connect again?
TP-Link ADSL2+ Wireless :: TD-W8961ND Trying To Connect 6 PCs But Only 4 Connecting?
Nov 13, 2012Region : Others
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 2.0.0 Build 120427 Rel.09135
ISP : True
I just bought the wireless router as stated in the subject and I cant get 2 of our PC�s to connect wirelessly for some reason. 4 other PC's are fineAll machines running windows 7, but when the authentication type on WPA2-PSK the 2 computers ask for a password which we put in but keeps saying its wrong, but infact its right.I can connect them on WPA-PSK, but then all the computers drop out after 30 seconds.
TP-Link ADSL2+ Wireless :: TD-W8970 Freezes Randomly
Mar 24, 2013Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Infostrada
My TD-W8970 freezes randomly, sometimes several times a day, sometimes less, but now the problem it's more frequent and I suppose it could be generated by some internal component that could have a abnormal behavior.Anyway, this happens in different situations, either using all the functionalist, or being only on and in idle state. Last time was few minutes ago, when all the system were shuttled down and only router was on.
TP-Link ADSL2+ Wireless :: TD-W8961NB / How To Add Other DDNS Providers
Jan 12, 2013Region : Germany
Model : TD-W8961NB
Hardware Version : V1
Firmware Version : 1.0.0 Build 110707 Rel.32779
ISP : DTAG
would it be possible to add other DDNS providers to the router menu?E.g. I use dnsomatic.com as DDNS service (pretty much the same syntax/protocol as DynDNS, but free and more flexible).
TP-Link ADSL2+ Wireless :: TD-W8960N - Cannot Disable SPI Firewall
Dec 15, 2012Region : NewZealand
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.56405n
ISP :
According to the manual, when I go to edit my WAN connection, I should be able to enable/disable the SPI firewall. However, on my firmware I get no such option. My SPI firewall is always enabled.
I would like to be able to completely disable it when I'm testing so that I can ensure the firewall is not interfering with my tests.
TP-Link ADSL2+ Wireless :: TD-W8951ND V4 - Does It Supports MAC Spoofing
Mar 31, 2013Region : India
Model : TD-W8951ND
Hardware Version : V4
Firmware Version :
ISP :
The product manual of TD-W8951ND V4 states that it's supports MAC spoofing. But in the product itself, it is nowhere to be found. I tried contacting the customer care via email but they are too lazy to respond. If they disabled this feature then why in the world they mentioned in the manual. I double checked the manual before buying this model. Now I stuck with it.