Cisco AAA/Identity/Nac :: ACS 5.x And Nokia IPSO 6.2 Connection
Jun 13, 2012
Any experience in using Nokia IPSO with ACS5.x and non-locol accounts ( on the Nokia )
I`ve created a shell profile with the following config :
Attrib: service Value: nokia-ipso
Attrib: Nokia-IPSO-User-Role Value: "role_name_on_IPSO"
Attrib: Nokia-IPSO-SuperUser-Access Value: 1
The user is passing authentication but is denied access on IPSO as "user not configured for Voyager". I`m not 100% the config above is accurate as any previous instructions were based on 4.x & Interface config.
View 2 Replies
ADVERTISEMENT
Jan 22, 2013
I already mention on another topic that I have problems with my Nokia 500 wireless connection with the router. From time to time (in some cases after few seconds since the connection was made) it's loosing the connectivity with the router. Normally it's loosing the connectivity when the connection it's not used by any phone application.Is this normal? I want to mention that the power saving function of the phone it's disabled so the problem can be from the router.I already tried TPIK only but no success.
The router has the following setings:
- Enable Auto Channel Selection - checked
-Transmission Rate : automatic
- WMM Enable: checked for QoS
- Cipher Type : auto
- PSK / EAP : PSK
Advanced wireless:
- Beacon interval : 100
- RTS Threshold : 2346
- Fragmentation : 2346
- DTIM interval : 1
- Preamble Type : Short
- CTS Mode : Auto
- Wireless Mode : n/g/b
- Band Width : Auto
View 5 Replies
View Related
Apr 26, 2011
I just bought Dell laptop and I'm trying to setup internet connection through my cellphone. My cellphone is Nokia 5530 XpressMusic. I followed someone's recommendation to get Nokia Ovi Suite: I downloaded it, added my device, successfully browsed files on the phone, browsed the internet, but after I reboot computer Nokia Ovi Suit says to connect my device, and browsing files/internet doesn't work anymore. Am I doing something wrong, or maybe there's some easier way to connect?
View 10 Replies
View Related
Oct 23, 2011
i am unable to setup a Bluetooth connection between my nokia phone and my Dell inspiron N 4500. I am currently using windows 7 and the bluetooth icon in the Device manager window is unavailable.
View 5 Replies
View Related
Aug 10, 2011
I cannot get it to work : if interesting traffic comes ffrom the IPSO side, the box would not even try to set up the tunnel. and If it comes fomr the ASA side, the box attempts to do so but it with this strange message : AM_WAIT_MSG2
View 3 Replies
View Related
Aug 29, 2011
i am having a nokia c5-03 and having a fast wifi connection near my home and it connects to my cell but i dont know how to connect that wifi to my pc using my phone?
View 2 Replies
View Related
Feb 1, 2012
WLAN configuration for nokia n95 8Gb? and the phone is only a clone!...
View 2 Replies
View Related
Nov 22, 2011
I am using Tenda WiFi Router Model no W316R. It is working fine for my Laptop also on Nokia C3-00 cell phone.Problem is that when i click on Youtube Videos on Cell phone, media player shows an error "No Responce" after few seconds. I showed my phone to company outlet they said that configure your Router properly for Streming on Cell phone
View 3 Replies
View Related
Aug 20, 2012
i am using vodaphone internet on nokia c1-01,i want it to use it on laptop via usb or without
View 1 Replies
View Related
Dec 8, 2011
i want to connect my nokia c3 to wifi modem
View 2 Replies
View Related
May 21, 2011
i have PC Suite for Nokia n73 but i have no PC Suite for Nokia 2730 classic.So i cannot connect to the internet by using Nokia 2730 classic
View 1 Replies
View Related
Dec 10, 2012
my laptop cannot find headset bluwtooth
View 1 Replies
View Related
Nov 27, 2012
my headset is not recognised by my laptop!!!
View 2 Replies
View Related
Mar 3, 2012
I have wifi capabilities on my nokia phone, how can i down load it to my phone from my lap top.
View 1 Replies
View Related
Dec 4, 2012
how to find wifi password in Nokia e66
View 1 Replies
View Related
Mar 16, 2012
I am using N5110 15R. I am trying to connect my Nokia E71 via Bluetooth, they both get paired but when drivers ty to install in my p.c only imaging and Bluetooth modem driver install successfully but other 4 or 5 drivers not found every time. it says peripheral driver not found even through windows update center also.
I have tried to connect my Nokia with Dell N5010 15R and it install all drivers successfully.
View 5 Replies
View Related
Apr 21, 2011
I cannot install driver for Nokia Siemens Network c2110. when try it show error message then followed by another message showing" required administrative right....." where as this connetion works on laptop and that same file installed into another computer.
View 1 Replies
View Related
Dec 31, 2012
How i find my lost nokia c2 03 with imei no.online without any pay..
View 1 Replies
View Related
Sep 22, 2011
how to reset nokia siemens 1600 modem as i have forgotten its username & password which i changed?
View 1 Replies
View Related
May 4, 2012
How I connect internet through wi-fi using BSNL Broadband I want to know primary DNS step 1/2, My Mobile set is Nokia C3-01 and Router is Seimen gigaset SE568. My Mobile Nokia C3-01 is not connecting internet through wi-fi using BSNL Broadband. I need to fill the primary DNS step 1/2 in the settings so I want to know the primary DNS
View 1 Replies
View Related
May 17, 2011
I am using a broadband connection on a PC running Windows 7. The plan which my ISP is providing me comes with a speed of 4Mbps upto first 20 GB and then 512Kbps after that, every month. My problem is that I am getting only 65-70 Kbps download speed. (tested over various sites and torrents). My router (Nokia Siemens) settings show that my Downstream speed has been assigned as 7999 Kbps but still I am not getting the speed anywhere near that and I have not consumed the 20GB limit as yet.
View 12 Replies
View Related
Apr 10, 2011
My phone is a Nokia-N900, and I find the most useful way to interact with it from my PC is by ssh. Luckily it is possible to switch out the usb-networking module in the devices kernel to make it appear to windows as a generic RNDIS gadget. Plugging it into a windows PC I can now ssh into it, I can open an sftp session, everything works perfectly...
Except I can't access the web. I can't view other network resources. I look in the network connections section in the control panel and see my two connections, but I don't see any way to set which one to use for what. Seeing as I only use usb0 for ssh and eth0 for everything else, it seems I need a way to set it up so that usb0 only gets port 22 or something similar.
Is there any way to achieve this, or another method by which I could leave my phone connected to my Pc while using it for other network tasks?
View 1 Replies
View Related
Feb 28, 2011
I recently purchased WUSB600N because I want to use the N speed of my WRT320N router. My laptop only has a built-in 802.11g network adapter. Kindly share your insgihtson why I only get 6.5 Mbps using my WUSB600N compared to 18.0Mbps using my builtin 802.11 g network adapter in my laptop? Too bad I can't use 5GHz as Nokia mobile phones that use our wireless connecion are only G capable. Even iPhone 4 cant fully use 5Ghz in 802.11n.
View 1 Replies
View Related
Jul 18, 2012
the customer has ACS 5.3 and it was connected with AD successfully.Now the customer has changed the DC name and ACS still refers to the old name.How to force the new DC discovery without clear all the configurations ?,Without DC discovery, I have the disconnect status, but I'm still able to browse AD groups.
View 7 Replies
View Related
Jan 17, 2012
currently I'm evaluating an ACS 5.2.I need to authenticate the VPN-Users against LDAP, but have no direct connection from the ASA to the LDAP-Server. So the ASA should connect to the ACS to ask the LDAP-Identity-Store, OK.
My first Problem is: the ACS doesn't respond to the RADIUS-Requests of the ASA! ASA use's Port 1812, the Secret is ok, the ASA is as a Network Device in the ACS configured and I've created an internal Test-User on the ACS.the Firewall-Log shows the established connection (so I think, there is a Hand shake!? ), but the ASA says in Radius-Test: "EROR:Authentication-Server not responding".
View 3 Replies
View Related
Oct 23, 2012
We have 4 ACS 5.3 Servers connected as Primary and Secondary Servers.We use a "RSA SecurID Token Servers" External userdatabase for authentications and are able to sucessfully authenticate (vpn-)users when the requests are send from the primary ACS Server.As soon as a secondary ACS server sends the request to the RSA server the request fails. "Node verification failes"
On the RSA Authentication Manager 6.1 Server, we have created a Agent-host wich contains the 3 secondary nodes (FQDN and IP's). The "sdconf.rec" file has been installed on theprimary ACS Server and are automatically (so it looks like) replicated to all ACS Servers.Still none of the secondary server are able to authenticate the users agains the RSA server.
View 1 Replies
View Related
Feb 14, 2012
I'm trying to configure a timeout for network connection, but when it suppose to disconnect client, it's not working. Is it possible to do this??
Only works when the client is connecting and is denied if the time is not valid. But how could I do this if the client is already connected, enable re-authentication?
View 2 Replies
View Related
Apr 9, 2012
I have a 802.1x solution with two redundant ACS 5.2. Network A configuration use like Primary ACS-SJM and ACS-GLX like a secondary for network B configuration use like Primary ACS-GLX and ACS-SJM like a secondary. My solution was working fine about one year ago. but one week ago isn´t working fine. The problem my ACS-SJM lost connectión and user can´t authenticated when the user trye to connect to ACS-GLX either can´t connect. I have to shutdown the ACS-SJM that way can authenticate to the ACS-GLX. I check the log and I didn´t find anything I check the switch.. too where the ACS is connected. but didn´t find anything too.
both ACS have the following IOS version:
ACS 5.2.0.26.4
View 0 Replies
View Related
Mar 14, 2012
are the connections between the ACS and external identity stores encrypted?I know that when setting up LDAP identity store there is the option to specify SSL conection. Are the other connections encrypted by default, or is the data sent between the ACS and AD, for example, sent in the clear?
View 3 Replies
View Related
Feb 7, 2012
customer provide quite large network with dot1x deployment - there is dual ACS5.3 servers for authentication Wired, VPN and WiFi access. Users (and computers) are mostly authenticated against Active Directory - there are several AD servers in the network.I found there is tens of cases every day with error message:24401 Could not establish connection with ACS Active Directory agent.This happens in random day and night time regardless on current authentication load. how to diagnose this more deeply? Or where to look for – is it problem with internal communication with AD Agent or is the problem in communication AD agent to AD servers? How is solved redundancy in case one AD server is not accessible – as there is no such setting in the AD connection configuration in ACS.
View 9 Replies
View Related
Dec 10, 2012
Recently our ACS loss connection to AD. Notice following error message (collect from show tech):
Dec 9 00:05:31 OasPrp-Lvl07-ACS01 adclient[24514]: INFO <bg:ageBindings> base.
bind.healing Lost connection to myhqkul990003s.simedarbygroup.com. Running in di
sconnected mode: KDC refused skey: Preauthentication failed
[Code]....
However we manage to restore the connection by reset password of the AD account that used in establish connection between AD and ACS.
View 1 Replies
View Related
May 9, 2010
I am trying to configure the ACS with AD in the identity store but am running into the following issue.I enter the AD Domain Name and username and password and hit the 'Test Connection' button and receive a DNS error stating that it 'Cannot resolve network address'.I have logged into the CLI and test to the domain name from there and it works fine.
View 5 Replies
View Related
Nov 13, 2011
ACS had been integrated with Active Directory before ACS upgrade to 5.3. After the ACS 5.3 upgrade users aren’t able to login to AAA devices occasionally. Error message is:
{AuthenticationResult=Error; Type=Authentication; Authen-Reply-Status=Error; }
24429 Could not establish connection with Active Directory
At the same time, when this issue occurs, ACS connection to AD works fine (checked with Users and Identity Stores> External Identity Stores > Active Directory “Test Connection”)
View 11 Replies
View Related
