WLAN Configuration For Nokia N95 8Gb?
Feb 1, 2012WLAN configuration for nokia n95 8Gb? and the phone is only a clone!...
View 2 RepliesWLAN configuration for nokia n95 8Gb? and the phone is only a clone!...
View 2 RepliesThe E1200 is connected to a router (BEFSR41) that is acting as DHCP server. So I have disabled the DHCP Server option on the E1200. Once configured, the wireless connection is working by unexpectedly only as guest user (I tried via PC XP, PC Win 7 and IPad) on the guest network. The problem is that once configured, the E1200 is no more reachable unless I reset it and I reconfigure it. If I try to access the IP 192.168.1.1, I get the setup page of the router (BEFSR41) and not the E1200. From another computer the IP Scan discover the E1200 as 192.168.1.103, but I am not able to reach it at that address.
View 5 Replies View RelatedI have a Cisco router 1941 connected to a switch. I'm configuring the w LAN- AP and i need to have the wireless devices have an ip in the same range of the wired devices.Since i cant use the same ip range on the gig0/1 and the V LAN 1 for the wireless, i wanted to know how to config the giga0/1 connected to the switch to act as a layer 2 port and i keep the ip on the v LAN 1.
View 9 Replies View RelatedWe have 5508 controller (redundant) & would like to configure Staff vlan to get authenticate with active directory.i am new to the controller device & want to configure controller with active directory (windows 2012).
5508 controller (Active & Standby) with 48 Access Point.(configuration Done) Guest Vlan (only for internet Access) controller based web authentication configured.
Staff Vlan ( inside & outside ). Need to configure with LDAP authentication?
I am implementing wireless lan controller for a customer's site. This site uses Cisco WLC2112 and AIR-LAP1041. I configure via start-up wizard and WLAN security configuration. The client joining via WLAN seems to work fine, able to browse Internet. But when adding a shared printer or sharing files, the machine's unable to find the computer name. When test pinging, it replies when pinging by IP only. This is not happened when using a LAN wire.
View 3 Replies View RelatedI need to take the backup of configuration file for WLAN Controller 4420, I tried all the possibilities given in the documentation but the backup fails, I have main confusion with the file name to be backedup, i am not able to findout the configuration filename any where even when i use CLI?
View 1 Replies View RelatedWireless card is Dell Wirele4ss 1490 Dual Band WLAN Mini-Card
Each time I try to launch the Dell WLAN Utility I get a message:
"Internal configuration is inconsistent. Please restart the machine to resolve the problem."
Restarting does not solve the problem.
The wireless card connects fine with Windows managing the connection. But what about the Dell Utility? What can be done so it will launch and I can let it manage the wireless connections?
I have reinstalled the Driver and utility using R115319.EXE
i am having a nokia c5-03 and having a fast wifi connection near my home and it connects to my cell but i dont know how to connect that wifi to my pc using my phone?
View 2 Replies View RelatedI am using Tenda WiFi Router Model no W316R. It is working fine for my Laptop also on Nokia C3-00 cell phone.Problem is that when i click on Youtube Videos on Cell phone, media player shows an error "No Responce" after few seconds. I showed my phone to company outlet they said that configure your Router properly for Streming on Cell phone
View 3 Replies View Relatedi am using vodaphone internet on nokia c1-01,i want it to use it on laptop via usb or without
View 1 Replies View Relatedi want to connect my nokia c3 to wifi modem
View 2 Replies View Relatedi have PC Suite for Nokia n73 but i have no PC Suite for Nokia 2730 classic.So i cannot connect to the internet by using Nokia 2730 classic
View 1 Replies View RelatedI already mention on another topic that I have problems with my Nokia 500 wireless connection with the router. From time to time (in some cases after few seconds since the connection was made) it's loosing the connectivity with the router. Normally it's loosing the connectivity when the connection it's not used by any phone application.Is this normal? I want to mention that the power saving function of the phone it's disabled so the problem can be from the router.I already tried TPIK only but no success.
The router has the following setings:
- Enable Auto Channel Selection - checked
-Transmission Rate : automatic
- WMM Enable: checked for QoS
- Cipher Type : auto
- PSK / EAP : PSK
Advanced wireless:
- Beacon interval : 100
- RTS Threshold : 2346
- Fragmentation : 2346
- DTIM interval : 1
- Preamble Type : Short
- CTS Mode : Auto
- Wireless Mode : n/g/b
- Band Width : Auto
I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.
my laptop cannot find headset bluwtooth
View 1 Replies View Relatedmy headset is not recognised by my laptop!!!
View 2 Replies View RelatedI have wifi capabilities on my nokia phone, how can i down load it to my phone from my lap top.
View 1 Replies View Relatedhow to find wifi password in Nokia e66
View 1 Replies View RelatedAny experience in using Nokia IPSO with ACS5.x and non-locol accounts ( on the Nokia )
I`ve created a shell profile with the following config :
Attrib: service Value: nokia-ipso
Attrib: Nokia-IPSO-User-Role Value: "role_name_on_IPSO"
Attrib: Nokia-IPSO-SuperUser-Access Value: 1
The user is passing authentication but is denied access on IPSO as "user not configured for Voyager". I`m not 100% the config above is accurate as any previous instructions were based on 4.x & Interface config.
I am using N5110 15R. I am trying to connect my Nokia E71 via Bluetooth, they both get paired but when drivers ty to install in my p.c only imaging and Bluetooth modem driver install successfully but other 4 or 5 drivers not found every time. it says peripheral driver not found even through windows update center also.
I have tried to connect my Nokia with Dell N5010 15R and it install all drivers successfully.
I cannot install driver for Nokia Siemens Network c2110. when try it show error message then followed by another message showing" required administrative right....." where as this connetion works on laptop and that same file installed into another computer.
View 1 Replies View RelatedHow i find my lost nokia c2 03 with imei no.online without any pay..
View 1 Replies View Relatedhow to reset nokia siemens 1600 modem as i have forgotten its username & password which i changed?
View 1 Replies View RelatedHow I connect internet through wi-fi using BSNL Broadband I want to know primary DNS step 1/2, My Mobile set is Nokia C3-01 and Router is Seimen gigaset SE568. My Mobile Nokia C3-01 is not connecting internet through wi-fi using BSNL Broadband. I need to fill the primary DNS step 1/2 in the settings so I want to know the primary DNS
View 1 Replies View RelatedI am using a broadband connection on a PC running Windows 7. The plan which my ISP is providing me comes with a speed of 4Mbps upto first 20 GB and then 512Kbps after that, every month. My problem is that I am getting only 65-70 Kbps download speed. (tested over various sites and torrents). My router (Nokia Siemens) settings show that my Downstream speed has been assigned as 7999 Kbps but still I am not getting the speed anywhere near that and I have not consumed the 20GB limit as yet.
View 12 Replies View RelatedI just bought Dell laptop and I'm trying to setup internet connection through my cellphone. My cellphone is Nokia 5530 XpressMusic. I followed someone's recommendation to get Nokia Ovi Suite: I downloaded it, added my device, successfully browsed files on the phone, browsed the internet, but after I reboot computer Nokia Ovi Suit says to connect my device, and browsing files/internet doesn't work anymore. Am I doing something wrong, or maybe there's some easier way to connect?
View 10 Replies View RelatedMy phone is a Nokia-N900, and I find the most useful way to interact with it from my PC is by ssh. Luckily it is possible to switch out the usb-networking module in the devices kernel to make it appear to windows as a generic RNDIS gadget. Plugging it into a windows PC I can now ssh into it, I can open an sftp session, everything works perfectly...
Except I can't access the web. I can't view other network resources. I look in the network connections section in the control panel and see my two connections, but I don't see any way to set which one to use for what. Seeing as I only use usb0 for ssh and eth0 for everything else, it seems I need a way to set it up so that usb0 only gets port 22 or something similar.
Is there any way to achieve this, or another method by which I could leave my phone connected to my Pc while using it for other network tasks?
I recently purchased WUSB600N because I want to use the N speed of my WRT320N router. My laptop only has a built-in 802.11g network adapter. Kindly share your insgihtson why I only get 6.5 Mbps using my WUSB600N compared to 18.0Mbps using my builtin 802.11 g network adapter in my laptop? Too bad I can't use 5GHz as Nokia mobile phones that use our wireless connecion are only G capable. Even iPhone 4 cant fully use 5Ghz in 802.11n.
View 1 Replies View Relatedi am unable to setup a Bluetooth connection between my nokia phone and my Dell inspiron N 4500. I am currently using windows 7 and the bluetooth icon in the Device manager window is unavailable.
View 5 Replies View RelatedI am position to migrate from CatOS 6509 switch to native IOS 6509 switch. long time ago, there was some site to convert automatically based on copy and paste onto the tool, but i can not find.
Does anybody know how to convert CatOS configuration to Native IOS configuration ? It is not IOS change, but it is configuration convert.
I have webcams that need port 8081 opened and I did that, everything worked fine until my DIR655 jammed up and power cycling it and the modem 3-4 times DID not make it work: no internet access and it was definitely a DIR655 problem. So, out with the paperclip to do the big reset, causing me to lose my configuration. When "most" of it came back up with my new config (I had screen prints), all was okay EXCEPT the webcams. Addresses and ports were all configured properly, address was fixed too on the client computer rather than use DHCP. I had a DNS relocation service running (DYNDNS) for the WAN side, but that address (My IP) didn't change either. I tried EVERYTHING. Finally, I realized in all my screwing around that I had enabled UPnP in my application, something I hadn't done before, but did this time as a desperation move. UPnP had always been checked off in the router. So.....I REMOVED my port forwarding and virtual server settings (either one worked before), and voila, everything working, Is this a normal occurrence, that if you have UPnP running, that this auto configuration overrides any manual configuration?
View 2 Replies View Relatedmy wife had Internet. i would like to provide a wired Internet connection trough the wife. Al set. problem: wife disconnects when i plug in the cable ...
View 4 Replies View RelatedI am a owner of a cyber cafe.there is wired lan connection on the desktop computers in my cafe which is connected to a wifi router (Dlink).I have issue while playing counter strike 1.6.if i am connected to wifi router from my laptop, i am not able to detect the lan game server. the game server which is created on one of the desktop machine on the lan network of my cafe ! In other words I want to play cs 1.6 from my laptop which is connected to a LAN network through wifi router !
Laptop Config :
Os : windows 7
Desktops OS : windows xp
Router : Dlink