Cisco AAA/Identity/Nac :: Radius COA Message To 3845 Not Working?
Sep 13, 2012
I have a cisco 3845 running 12.4(15)T10.
I can send a POD and disconnect my session. But when I try to send a COA, I always get back the same error. Here is the debug log:
*Sep 14 17:25:16.017: COA: 172.16.XX.XX request queued
*Sep 14 17:25:16.017: ++++++ CoA Attribute List ++++++
*Sep 14 17:25:16.017: 66F2DBEC 0 00000009 string-session-id(337) 8 0000007F
*Sep 14 17:25:16.017: 670B3394 0 00000009 sub-qos-policy-out(346) 11 POLICE-TEST
The error message "5405 RADIUS Request dropped", what does it mean ? We have implemented 802.1X on a C4506 switch running IOS 12.2(53), it has worked fine for about 3 months but now I get users not able to authenticate. In the loggs on the ACS I get the obove message.
When the users connect their laptop they are getting a authentication prompt but the switch is not changing the VLANs on the port after successful authentication.Below are the logs on the switch
Jan 28 2013 17:21:32.417 CST: RADIUS: Framed-MTU [12] 6 1500 Jan 28 2013 17:21:32.417 CST: RADIUS: Called-Station-Id [30] 19 "E4-D3-F1-0B-C6-0A" Jan 28 2013 17:21:32.417 CST: RADIUS: Calling-Station-Id [31] 19 "84-8F-69-A8-BD-1D" Jan 28 2013 17:21:32.417 CST: RADIUS: EAP-Message [79] 45
I received a syslog message on my cisco 3845 router, what is that message mean. 11 13:36:06.265 UTC: ASSERTION FAILED: file "../les/if_ng_dslsar_tx.c", line 385
For some reason I am unable to retain the system message logging and config archive references after a reboot of the router. I need to be able track config changes and retain the ability for the customer to recover the original config should they destroy the config through any misguided fiddling on their part. There is no remote management and these router need to be recoverable. I know this used to configured by default on earlier routers as I've checked on teh ones we have, but checking through the configuration has not worked and i have everything configured the same but system messages are still lost on reboot. Im using Cisco 3845 running IPbase 12.4(3) and the config i have is shown below.
We have multiple RA VPN groups on a 3845 router.RADIUS authentication is currently happening between the 3845 and a single Windows 2008 server. We have a specific windows group that AD users are members of, and they are allowed to connect via VPN.
I'm creating a new RA VPN Group, which should only allow different AD users. Is it possible to create another RADIUS association to the same server, or do I need to authenticate against a different Windows server?
if the notification that the pw will expire in xx days works in the scenario named in the headline? Anyconnect SSL-VPN (ver 3.1.xxx) terminating on ASA 5510, v 8.4.4, authentication: Radius to ACS 5.3 (over MSChapV2), IdentityStore: MS ActiveDirectory. the Password-Change (if the pw is set to "change at next Logon") is working, even if there is a Bug, too (on the ac-client).
In the tunnel-group password-manegement is enabled and notify is set to the default of 14 days.does the ACS interrupt the notification? I can't see any message in ACS Log or in "debug aaa common 255" or "debug radius" on ASA.
We are running two Cisco 3845 routers, one at our central office and one at a remote site. We bonded two T1's together and it worked fine (link 1 and link 2). We now want to add two more T1's and bond the four together but can't seem to get it to work. The original T1's still work fine (link 1 and link 2) but the new ones do not (link 3 and link 4). Here is our config does it look right?
***CENTRAL OFFICE*** !card type t1 0 0card type t1 0 1card type t1 0 2card type t1 0 3card type t1 2 0card type t1 2 1!network-clock-participate slot 2 network-clock-participate wic 0 network-clock-participate wic 1 network-clock-participate wic 2 network-clock-participate wic 3 network-clock-select 1 T1 0/2/0network-clock-select 2 T1 0/2/1network-clock-select 3 T1 0/3/0network-clock-select 4 T1 0/0/0!controller T1 0/1/0clock source internalcablelength long 0dbchannel-group 1 timeslots 1-24!controller T1 0/1/1clock source internalcablelength long 0dbchannel-group 1 timeslots 1-24!controller T1 2/0!controller T1 2/0/0clock source internalcablelength long 0dbchannel-group 1 timeslots 1-24!controller T1 2/0/1clock source internalcablelength long 0dbchannel-group 1
I am currently useing ACS 5.2 and have no problem using Tacacs+ with AD access.
But with Radius it seems I can only get the Local identity store to work, need to do something special to get Radius to work with active directory with Cisco ACS?
I have been trying to get our IPS (ASA-SSM-10 and 4260) to authenticate with Cisco Radius ACS 5.2 and they are not working. However, I was able to get them working with Microsoft Radius. Below is the logs from the IPS:
I need to configure RADIUS VSA configuration for a my alvarion device. Following are the attributes that need to be configured.
- Packet Data Flow ID (ID 1, integer16) - Direction (ID 4, integer8) - Transport Type (ID 6, integer8) - UplinkQoSID (ID 7, integer8) - DownlinkQoSID (ID 8, integer8)
[code]....
I was able to configure the first 6 attributes, how can I add the Sub - TLV's ClassifiedID, Priority, VLAN-ID and Classifier Direction which come under Classifier. Don't see any option for that in ACS 5.x
We have 2 ACS 4.2.1 servers in Windows 2003 with SP2 installed. We have updated the first ACS to the latest patches for Windows. After that we started having problems. CSRadius either stops by itself or when some time passes we get the following error in Failed attempts "Unknown error". When we restart the ACS services by the GUI, it resumes until the next time it stops.Do you happen to know if we have any bugs related to Windows patches?
I am trying to configure AAA authentication and authorization with Cisco 3725 (IOS 12.4(17)) for 802.1x and ACS 4.2 with VLAN assignment to my Windows XP client. (trying to assign VLAN 100 in my scenario).When user connects to the Router, it passes the authentication process (EAP-MD5). In my debug i see that Router recieves the Radius Attributes BUT does not apply anything!My running config:
Building configuration... Current configuration : 1736 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec
[code]......
As a result the vlan-switch data based does not change.
I have a questión about radius authenticaction with AD, when I log in into the network with user in AD and I make a mistake in password my radius authenticaction event in ACS 5.2 dont show me this logg. only show the authentication succeeded but dont show me the authentication failed. Maybe i must to enable same service to show the authentiaction failed. The Voice authetication works fine..
aaa new-model aaa authentication login default group radius local aaa authorization exec default group radius local aaa session-id common ip radius source-interface Vlan31 vrf LEGACY [Code] .....
I want to add Radius attribute to Rad ware devices , so I will have the option to grant "read only" permission to users. as I understand I need to add VSA for the "read only" permission, or configure specific "Service-Type value 255"
in the following picture you can see the required information from Rad ware:
I am using the Self RADIUS server in my Cisco ACS SE 4.2 appliance S. I have an AAA client C that interacts with S by means of the RADIUS protocol. This works fine, in that S correctly carries out authentication chores on username/password (PAP and CHAP) pairs received from C, sending back to C the corresponding Access-Accept packet when the authentication succeeds, or Access-Reject when it doesn't.
I have been able to import a set of three VSAs into S. Each of those attributes is of string type. I then configured in S a single user U with password P so that, whenever a U/P pair received in S from C is authenticated by S, S should send back to C, in the Access-Accept packet, the three attributes with the following values: [code]
With this setup, when an authentication is successfully completed by S, C receives 53 bytes worth of data from S every time. I am attaching a typical example, already disassembled. I have disguised the actual vendor ID, for legal reasons, but the rest is exactly as it was when received in C.
According to the disassembly, what we got is an Access-Accept packet, as expected. Its length is 53 bytes - again as expected, for this is the only packet that C has received from S here. However, the packet is incomplete, for attribute #3 is missing its value field.
Looking into the whole packet in more detail, it can be seen that while the wire format for the first attribute, namely, Frame-IP-Address, is correctly constructed, the remaining are not. For example, the sequence of bytes corresponding to the attribute #1 reads 1a 09 00 00 xx xx 2c 61 62 63. I believe that this is incorrect; it should be 1a 0a 00 00 xx xx 2c 61 62 63, for the wire format for this attribute consists of 10, not 9, bytes. I tried a few variations on the values for the attributes, and the results are always substantially the same, in that the wire formats for these attributes are always incorrect.
This all probably implies I have done something wrong when importing the VSAs into S, and/or when configuring things on S. I am therefore attaching the csv files I used to import my VSAs into S; as before, names and vendor ID are disguised, but their lengths are exactly the same as in the undisguised file. I used two csv files: One to import the vendor ID, and the other to import the VSAs under that vendor ID. As for user U, in S's administration GUI I clicked on User Setup and selected user U, moved to the bottom of the screen, where the attributes for this particular vendor were present,introduced the values for each attribute mentioned above, and made sure that button in front of each attribute was ticked.
Recently I came across a router (Cisco 3845, IOS 12.4) configured for TACACS, one local username and an enable password. Going through the configuration I noticed the router didn't have an enable secret password which I thought was strange. The TACACS config is below, comments regarding the TACACS config and the consequences of not having an enable secret or if there is a need for one.
aaa authentication login default group tacacs+ aaa authentication login no_tacacs enable aaa authorization exec default group tacacs+ aaa authorization commands 1 default group tacacs+ aaa authorization commands 15 default group tacacs+ aaa accounting exec default start-stop group tacacs+ aaa accounting commands 1 default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+
I need to add OPNET Radius attributes in ACS 4.2. How should I add a new VSA in ACS? The google search is pointing me to CSUtil.exe, and I cannot find this utility in the ACS install files. These are the values that I need added for OPNET. When configuring the RADIUS server to support the ACE Live Appliance, use the following Vendor Code and Vendor Specific Attribute (VSA): Vendor Code: 7119 VSA: 33.
When I upgraded my cisco 3750 ME from c3750me-i5k91-mz.122-46.SE to c3750me-i5k91-mz.122-58.SE2.bin all commands for radius disappeared? However, there are a lot of commands to ldap which was missing in the previous version. Seems as if the radius has disappeared and been replaced by ldap?
I am trying to configure ACS 5.1 to authenticate SSL VPNs on an ASA5500 and aslo to provide admin access to the ASA5500 both via radius.I want to authenticate the VPN against a SeureID appliance and the admin login against a different database (using internal for testing but will use LDAP in the end).I cant seem to get the ACS to distinguish between the two authentication types. If I create a rule that says match protocol radius I can point that at either database but if I try saying match radius and service type 5 it doesnt match the VPN and falls through to the default authentication service. I have also tried matching service type 6 for admin and that doesnt seem to work either.In the end what I want to acheive is to authenticate teh ASA5500 VPN against the SecureID appliance and then admin access to all devices on teh newtork (a mixture of Cisco, F5 and Juniper) to active directory via LDAP where if the user is a member of the "admin" group they get access.I was intending to use specific devices for the ASA5500s (there aretwo) and then creat a device group based on IP address range for everything else.
I am trying to authenticate on Juniper NSM express using cisco ACS 5.2. The request is arriving at the cisco ACS but i am getting the following error.RADIUS requests can only be processed by Access Services that are of type Network Access.
I have CISCO ACS 5.1 radius for VPN on ASA and tried to configure an NDG on it for AIRONET 1260 too and worked fine with IEEE 802.1x CISCO EAP-FAST authentication As I had some trouble to let users to authenticate only on VPN if are VPN users and only on CISCO AIRONET if need only WIFI AIRONET I tried exception policies rules but something not working. VPN was ok but not WIFI access denied for rule policy access I decided to install CISCO ACS 4.x on Windows 2003 that is on ACS 5 DVD I created NDG as done on ACS 5 put a shared secret , put on AIRONET too as done for ACS 5 but I receive an error against ACS 4.x To troubleshout it I tried [URL] but not work ! I think to have done all fine owever on ACS 5 it worked in 5 minutes I searched log inside ACS 4 and found "Invalid message authenticator in EAP request" and I found this: [URL]Changed shared secret more times but ever not workign with ACS 4 I need to have user and password prompt on client trying to authentincate on AIRONET WIFI and I need ACS INTERNAL USER no active directory, no LDAP , no external user database?
I am having ACS 4.0.2 in my network, which I want to use for 802.1x Radius Authentication for Clients on PEAP-MSCHAPv2 methodology.As per the documentation " EAP Authentication with RADIUS Server", Doc ID: 44844.I have configured Network Configuration and populated AAA client IP range and Secret Key.
Question1: Under Authenticate Using option, there are various RADIUS flavors available for selection. For a Non Cisco AAA client, should I select RADIUS IETF?
Question 2: In the above snap shot, It has an option called Global Authentication Setup, where we can setup EAP configuration. Under PEAP subsection there is an option to "Allow EAP-MSCHAPv2" check box.After checking that, is a restart required to the ACS Server? Would it cause any disruptions to the existing services on the ACS?
I am trying to move my ISDN dialup branches authentication/authorization from old ACS 4.1 to ISE appliance. Before it was through ACS 4.2 with TACACS protocol but now since we are moving to ISE we are moving them to ISE with radius.
Problem is that isdn client gets authenticated and authorized but calls get dropped and they dont able to communicate with HO. IP address is assigned by Head End router to all remote isdn dialing branches..
I have used default "PermitAccess" in authorization policy and authentication policy is also default. I dont understand where I am going wrong as authentication and authorization is sucessful.
aaa authentication ppp default group radius local aaa authentication network default group radius aaa accounting network default start-stop group radius radius-server host 12.18.22.41 radius-server key *****
how to setup ACS 5.3 to authenticate wireless users over radius? I currently have the SSID pointing to a Microsoft IAS server and would like to move the authentication to be done via ACS.
currently I'm evaluating an ACS 5.2.I need to authenticate the VPN-Users against LDAP, but have no direct connection from the ASA to the LDAP-Server. So the ASA should connect to the ACS to ask the LDAP-Identity-Store, OK.
My first Problem is: the ACS doesn't respond to the RADIUS-Requests of the ASA! ASA use's Port 1812, the Secret is ok, the ASA is as a Network Device in the ACS configured and I've created an internal Test-User on the ACS.the Firewall-Log shows the established connection (so I think, there is a Hand shake!? ), but the ASA says in Radius-Test: "EROR:Authentication-Server not responding".
getting a Cisco WLC to work with MS NPS server? We've done it before albeit with differnt code versions.
I have a Cisco 5508 WLC running 7.0.116.0 code hosting a WLAN configured for WPA2 with 802.1x for authentication. I have two Windows NPS servers configured as the RADIUS servers for EAP-TLS authentication. Via debug info on the WLC I can see the 802.1x handshake take place with the wireless client and the WLC as well as a successful transmission of an Authentication Packet from the WLC to one of the RADIUS servers. However on the WLC I see repeated RADIUS server x.x.x.x:1812 deactivated in global list and on the NPS server I'm seeing event log errors indicating "The Network Policy Server discarded the request for a user" along with the pertinent auth request info that I would expect the NPS server to receive from the WLC. Based on the WLC debug info I'm never actually getting to the EAP-TLS certificate authentication part. It seems the NPS servers don't like the format of the initial RADIUS authentication request coming from the WLC and so don't respond whcih in turn casues to WLC to switch to the other NPS server which produces the same issue.
i changed from ACS 4 to ACS 5.2. Everything works fine but i have authentication failed in the Radius accouting reports every time when users connect through ASA or Juniper into our network. Juniper amd ASA only send accounting informations to ACS. The users are not configured on the ACS, authentication is done via external LDAP. So my question is why do o see authentication error on ACS because Juniper and ASA only send accounting packets ?
