Cisco :: ASA 5505 - Ping Times To NAT Addresses?
Nov 28, 2011
If I ping a NAT'ed IP address configured on an ASA 5505, is it handled at the firewall (as far as priority) as if I were pinging the firewall interface itself, or the end device? The reason I ask is I am seeing waves of ping latency that I can relate to data transfers, but the nothing is even close to being maxed out as far as CPU, memory, or bandwidth. My guess is this is being handled by the ASA in software instead of in hardware.
View 0 Replies
ADVERTISEMENT
Jan 17, 2012
slow ping times with Realtek, no problems with intel
View 1 Replies
View Related
Jun 20, 2012
Since about 3 weeks ago my DSL has been getting totally random ping spikes, from under 40 to over 1500MS for minutes to hours on end. Nobody else is using my internet, I've verified this. There is nothing sucking up bandwidth on any connected device or computer, as far as I can tell through troubleshooting to the best of my ability. I tried switching to a Cisco X2000 modem/router combo and it did nothing, still totally random latency. Also, when I called AT&T about this, they didn't even know what ping was. They ran an upload/download speed test (which is still mostly consistent regardless of latency) and told me I was basically making the issue up.
View 5 Replies
View Related
Apr 9, 2011
I have a gaming machine i ran for some time on a wireless connection. This connection had decent speeds but was unreliable and at times very slow (3000 vent ping). So me and my father fished some cat5e cable through some wall from our router to my room. We used some old external jacks verizon gave us and some 6 foot patch cables to connect the computer and router to the jacks. My problem is that once it wall all connected the lan speed has been terribly slow (several times slower than the wireless). Previously I used an ASUS pce-n13 wireless adapter and now the lan is running of the nvidia nforce on my Asus P5n-d motherboard. I am clueless to the problem and I have called Verizon and gotten nowhere.
View 3 Replies
View Related
Nov 8, 2011
I have a problem with a ASA 5505. He is crashing multiple times during the day. I've setup a syslog server en I'd noticed that the last two log notification were:
2011-11-08 12:28:19 Local4.Debug 10.0.0.254 %ASA-7-711002: Task ran for 27016 msec, Process = Dispatch Unit, PC = 84745ce, Traceback =
2011-11-08 12:28:19 Local4.Debug 10.0.0.254 %ASA-7-711002: Task ran for 27016 msec, Process = Dispatch Unit, PC = 84745ce, Traceback = 0x084745CE 0x08474942 0x08475511 0x08475DB7 0x08475EDA 0x08508D9B 0x0850908A 0x083AB5B8 0x083A1D55 0x080655C1 0x08895A19 0x08895AD0 0x08952194 0x08978450
It's a 5505 with a 10 user inside host license, wich incidentally is more.
View 2 Replies
View Related
Mar 1, 2010
I have a 1760-v router set up at my home lab and I am unable to access IP addresses outside my local network. I have my Cisco router's fast Ethernet port connected to a small net gear router which then connects to my cable modem. The Cisco router is able to ping local address fine, but when I try to ping an outside address or domain name it times out. However, when I am at the CLI and type something like Ping { URL}, it resolves Google's IP address but it will not ping it. I have IP DEFAULT-GATEWAY and IP NAME-SERVER both pointing to my net gear router and pointing to my ISP's DNS server.
View 3 Replies
View Related
Oct 18, 2012
I have a problem with an internet connection with a customer.They have a Zyxel 660 in bridge mode and the public ip is delivered to the eth0/0 outside interface of a 5505 ASA.They lose internet connectivity a couple of times per hour. What solves the problem immediately is disconnecting the ethernet cable from the eth0/0 and then directly plugging it back. Then it runs for 20-30 minutes or so.The isp doesnt't notice any errors on the dsl connection, only that they cannot ping the outside interface from time to time (duhhh)However, yesterday, when problem appeared for first time , I noticed that this Zyxel was very hot since it was placed on top of the ASA. Now it is set apart.In the meantime I already replaced all cables, but I think it's the Zyxel so I urged that the ISP send a new Zyxel.Though it sounds strange. [code]
View 4 Replies
View Related
May 8, 2013
I have a Linksys WRT54GS wireless router (10.77.79.1, 255.255.255.0) which hands-out DHCP addresses to my wireless/wired clients. This router is connected to the cable modem which then connects to the wonderful World Wide Web. Port 1 of this router is connected to a Cisco SG200-8 Small Business Switch (10.77.79.3, 255.255.255.0). My Dell 2950 is then connected to the SG200-8.
I know I'm doing something wrong because I cannot ping any of the 192.168.10.X IP addresses from the 10.77.79.X network, and vice-versa. All VLANs on the SG200-8 are set at their defaults (1 and Trunked?). Are there any additional configuration steps I need to perform in the SG200-8 or WRT54G?Is what I want to do even possible with my hardware?
View 1 Replies
View Related
May 6, 2011
I have a PIX 515E that I want to use to as a border between my internet connection and my Cisco AIR1131AG. I have configured the PIX to have the outside interface as a dhcp client which gets its dynamic IP address from the cable modem. the AP is connected to the E1 inside interface. Now I could see the E1 interface from the arp table from the AP but I cannot ping it. From the firewall I don't see the ARP table from the firewall. and i cannot ping the AP. what is wrong with the configuration? side note, i am able to connect to the AIR1131AG from my laptop I was not able to retrieve an IP address.
FW1 - CONFIGURATION
interface Ethernet0 description uplink towards the techsavvy modem speed 100 nameif outside security-level 0 ip address dhcp setroute !interface Ethernet1 description >>> WIFI LAN ACCESS <<< nameif inside security-level 100 ip address 10.0.0.1 255.255.255.0
[Code].....
View 3 Replies
View Related
Sep 23, 2012
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP
View 5 Replies
View Related
Nov 21, 2011
i have my Cisco E4200 set up with a 6rd tunnel. the tunnel seems to work fine for the most part. i can ping ipv6.google.com and get a response.however, i cannot ping the addresses of the IPv6 Tunnel ends from within my network. If i run a ping from outside the network, i can ping the IPv6 address of the server end, however, i cannot ping the E4200's end of the tunnel. is there a specific option that needs to be set? i have allowed ping so that my IPv4 address is pingable, am i missing something for IPv6?
View 7 Replies
View Related
Dec 16, 2011
I'm trying to get a new 5505 installed in our network to replace the 1841 that died over the past few days (memory issues). One of the big pieces of functionality that the old router gave us was the ability to open certain ports to the outside world to let clients see web sites we were working on for them or let employees RDP in to their work machines. I'm having trouble getting that working properly with the new device.
After a lot of trial and error, I finally got some ports working, but only for some IP addresses. In theory, Comcast (our ISP) is routing 13 IP addresses to our device (a.b.c.177 through 189). For historical reasons, the external IP of the device is .178. Only those NAT entries for .177, .178 and .179 are currently working. I've attached the configuration of the ASA, as well as the configuration of the old 1841. As far as I know, Comcast's equipment is doing its job, so I don't have a lot of reason to question that end of it. And it was working with the 1841 in place before its untimely demise.
One note - I am also having trouble getting the VPNs working, so they are a work in progress. That will account for some of the differences in the configs.
View 7 Replies
View Related
Jan 6, 2011
We have Cisco ASA 5505 box.We have a /29 subnet available.At this moment one of IP addresses in this rage is assigned to VLAN2 used for outside interface all outgoing traffic from VLAN10 (for employees) will go out using one IP, xxx.xxx.xxx.1all outgoing traffic from VLAN20 (for visitors) will go out using second IP, xxx.xxx.xxx.2all outgoing traffic from VLAN10 host yyy.yyy.yyy.yyy (mail server, webmail, ...) will go out using third IP, xxx.xxx.xxx.3all specified incomming traffic to xxx.xxx.xxx.3 will be NATted to internal host yyy.yyy.yyy.yyy in VLAN10 .The main purpose is to have specific public IP address for mail server only not to get to any black list,and to give visitors different outgoing IP address than for our internal users.
View 3 Replies
View Related
Apr 22, 2012
I am new to networking and configuring a ASA 5505. I have one public IP and would like to know if I can Nat this ip to 2 private IP addresses. Both addresses will be passing similar traffic.
View 1 Replies
View Related
Sep 25, 2011
I have a customer thats got a Linksys router now, that has a DMZ port.The DMZ port is configurede to it routes the extra public ip-adress to the DMZ port it has.At the DMZ port they have another router connected, where they routes the public ip-adresses på some other devices.How can i make this setup on a Cisco ASA 5505 (With the Security Plus licens)What i have to do is to replace the Linksys router, and make it so, so it works like it was before with the Linksys.
View 5 Replies
View Related
Sep 8, 2011
Is it possible to two or more public IP Addresses bound to a Cisco ASA 5505 running 8.4(2).
View 9 Replies
View Related
Nov 7, 2011
trying to configure our ASA 5505 (hence my request for the ASDM). However, I can go CLI if push comes to shove.
What I'm trying to do is allow a range of IP addresses on the inside interface (those which the DHCP server is doling out IPs which are XXX.X.XXX.14-140) to access email only (which is hosted offsite). They still need to access the file servers which are on the inside but nothing should be going out to the internet other than email.
I believe I have to create a Network Object which contains the IP range I wish to restrict. I can see where I add the Network Object but I don't know what the syntax should be to specify the address range.
I'm also not sure what the sequence of the ACLs should be and whether or not I can keep the default Access Rules in place. There are the two implicit rules: 1) Permit any traffic out to less secure networks 2) Deny any traffic to anywhere (which is superceded by rule 1, yes?)
To create an Access Rule like the one I desire, do I need to move the two existing rules down the list so that the new one will supercede both implicit rules?
View 1 Replies
View Related
Dec 14, 2012
I have an ASA 5505 with Security Plus License ?I have 5 Static IP Addresses from my ISP?I have the following interfaces. Outside (vlan 2) / Inside (vlan 1) / Guest (vlan 3)For my Vlan3 guest network I have set it up so that DNS must be routed through opendns.org's DNS servers ( for web filtering, etc ) However, its using the static ip that I have plugged into the ASA.
What I would like to accomplish is to put my inside interface (vlan1) on another static ip for outside access if thats possible, so that I can route those clients through opendns.org however however giving them more web privlieges than what the guest network is getting.
View 14 Replies
View Related
Oct 7, 2012
I have a customer who has an ASA 5505 that is handling the routing for their internal network. They are running out of available IP addresses on their subnet 192.168.1.0/24. They have dumb switches that don't suppport multiple vlans or trunking & they are only able to connect to one switchport on the ASA. He doesn't not want to purchase any new equipment or rearrange their existing equipment at this time. The customer would like to statically assign IP addesses for 192.168.1.x & 192.168.2.x and have the ASA hand out DHCP addresses for 192.168.3.x addresses. The customer suggested configuring a super subnet. A 192.168.0.0/22 address scheme would provide an ip range 192.168.0.0 - 192.168.3.255 on a single VLAN. I know this is an unconventional way to setup an internal network & I will definitely advise the customer that this should only be considered as a temporary solution until they get more appropriate network equipment.
View 3 Replies
View Related
Sep 24, 2012
I inherited a Cisco ASA 5505 and am trying to piggy back the device off of an established Network. Here is the basic layout:
192.168.10.1 (Core Router - Handles DHCP/DNS)
192.168.10.9 (ASA 5505 - Piggy backing off of Network)
192.168.40.x (ASA 5505 - VLAN)
I'm able to get onto the Internet without any problems. Devices from the 192.168.10x Network can not ping the inside VLAN1 (192.168.40.x). However, I would like traffic going from the inside VLAN to the Outside VLAN to be blocked, except for 192.168.10.1 and 192.168.10.9. I've tried using ACL's but end up killing my Internet connection. 192.168.10.1 is the default route and is how I get out to the Internet. Is this possible? Essentially, I'm trying to set up a small Network that guests can connect to. The idea is that they can get to the Internet, but that is it. They can't get to internal resources on the 192.168.10.x Network
Here is the config:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password EeCsulrpu.9LalEE encrypted
[Code].....
View 5 Replies
View Related
Jul 25, 2011
I have purchased a subnet of 8 private IP addresses from my ISP. 109.x.x.128/29.The ISP has placed a juniper router within our data centre which is routing purely from 109.x.x.206/30 to 109.x.x.128/29 with the ip of fa0/1 set to .129.
I have linked a cisco 5505 to fa0/1 of the juniper from fa0/0 and configured its IP to .130. I have configured NAT to translate our client pool 192.168.16.x /24 address' to the internet.
Is it possible for the 5505 to route / map my remaing private IP addresses through its external port? I have tried creating a seperate VLAN for a DMZ for our servers to sit within but am returned with a subnetting error as VLAN for my external port is all ready configured within the same subnet.
View 2 Replies
View Related
Sep 19, 2012
I am trying to set up a lan to lan vpn access with 2 asa5505's but I cannot ping, traceroute or connect from either side. I can connect to both ASA 5505's from the internet, and connect to the internet FROM both 5505's, just not one to the other. I can ping the network GATEWAYS to the routers, just not the routers themselves.
Both of these machines have been configured for previous VPNs but that configuration has been removed.
View 12 Replies
View Related
Aug 18, 2011
I've been called upon to fix the SSL VPN issues in our ASA5505. The issue I am having is that I am able to log into the vpn, access the internet, but I'm unable to access anything on the LAN. I can't use ping or use DNS.
I'm using ASDM v. 6.2(1) and ASA verison 8.2(1). I'm not comfortable using the CLI and prefer the GUI.
View 13 Replies
View Related
Jul 28, 2011
I have a request to establish a site to site VPN with a customer. While collecting the information I give them our local network subnet which is a private subnet (192.168.5.0). They asked me if I could give them a public address instead. They can not work with the 192.168.5 subnet. Is this possible?
My side of the VPN is an ASA 5505 running 8.2(2). The other side i believe is a Checkpoint.
View 5 Replies
View Related
Oct 8, 2012
In setup for old RV042 (V1), when updating / adding Mac addresses, the table is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02 the list is random, thereby increasing the chance of user entering DUPLICATE IP addr with diff Mac addr. That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be able to catch duplicate ip errors even if the system does not flag the errors. All Cisco smart engineers can you all get the dhcp entries SORT by ip addresses.
View 2 Replies
View Related
Jul 21, 2011
I have a new 5505 that im trying to upgrade the IOS on. The 5505 and the laptop are connected via a 5 port switch.From the laptop i can ping the inside interface of the 5505, but i cannot ping the laptop from the 5505. As a result, my TFTP is failing.
View 5 Replies
View Related
Sep 9, 2011
I just tried to configure my ASA but unable to ping. My setup is as follows:
Cable Modem (DHCP from IPS)---> ASA (192.168.1.1)--->Belking Router (192.168.5.1)--->Switch (192.168.5.14)--->
ASA Version 8.2(3)
!
hostname WoodHomeASA-1
[Code].....
View 30 Replies
View Related
Jun 24, 2012
configuring ASA 5505 to be able to ping remote host.Setup - We have a site-to-site (192.168.1.0/24 - 192.168.2.0/24) VPN setup with client VPN access (IP Pool, 172.16.50.0/24) on 192.168.1.0 ASA 5505.Issue - Not able to ping host on 192.168.2.0 from VPN client 172.16.50.0 but able to ping 192.168.1.0 host.
View 8 Replies
View Related
Jul 19, 2012
We have ciso asa 5505 and we are using one public ip of 155.155.155.9 , so i wanna disable to ping from outside this ip , but not effect our site to site and remote vpn connections ,the only thing i need is to disable the public ip to ping from outside.
View 7 Replies
View Related
Nov 11, 2012
I have the connection working with my ASA 5505 but cannot ping the internal network. (Note external interface is getting the IP via DHCP)
View 4 Replies
View Related
May 24, 2012
i am trying to get my ASA 5505 with 2 internal VLANs (voice and data) and external internet VLAN to run in router as a stick, and route between VLANS.
I cant get it working though:
[code]...
View 4 Replies
View Related
Sep 7, 2011
We want to use an ASA as a pure routing device. Our network has several internal subnets (10.1.x.0/24), and we want to be able to reach them from outside and to allow access between them.
We have a defined a VLAN for each subnet range with the same security-level, added it to an Ethernet port and made the Ethernet that acts as outside as a trunk, and defined it as the global routing.
We cannot ping any of the subnet IPs defined in the ASA from outside nor we can ping it from the internal IP addresses.
Configuration:
: Saved
:
ASA Version 8.2(1)
[Code].....
View 3 Replies
View Related
Jun 17, 2012
I am trying to configure Nat on a clean ASA 5505, but can't get it to work. I ran the commands below. On the ASA I can ping the internet and inside vlan ip. On my laptop I can ping the ASA inside vlan ip, but I can't ping the outside vlan ip. From another network I can ping the ASA outside public ip. Is there an access-list that denies inside from accessing outside?
I am running version 8.4(3) and I erased the existing configuration.
ASA(config)# interface vlan 1
ASA(config-if)# ip address 10.0.0.1 255.255.255.0
ASA(config-if)# nameif inside
[Code].....
View 8 Replies
View Related
