Linksys Wireless Router :: E4200 Cannot Ping Addresses Of IPv6 Tunnel Ends

Nov 21, 2011

i have my Cisco E4200 set up with a 6rd tunnel. the tunnel seems to work fine for the most part. i can ping ipv6.google.com and get a response.however, i cannot ping the addresses of the IPv6 Tunnel ends from within my network. If i run a ping from outside the network, i can ping the IPv6 address of the server end, however, i cannot ping the E4200's end of the tunnel. is there a specific option that needs to be set? i have allowed ping so that my IPv4 address is pingable, am i missing something for IPv6?

View 7 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 Allow VPN Connection / No Traffic Passes Can't Ping Across Tunnel

Oct 28, 2011

I have recently purchased a E4200 i have flashed it with the latest Firmware 1.0.03 and Hard Reset the Router so the Media issue was resolved i was having. After upgrading the firmware to the latest version my Nortel VPN IPSEC Client no longer will work. The tunnel is connected and it passes traffic for about 15 seconds then nothing.  The connection remains connected but no traffic passes cant ping across tunnel.  I have checked all the settings and VPN - IPSEC - Passthru is enabled.   I have put the client in DMZ mode and tried that same thing.

View 7 Replies View Related

Linksys Wireless Router :: EA2700 IPv6 Dual Stack Doesn't Assign IP Addresses

Feb 5, 2013

My ISP recently started offering dual stack IPv6. After changing IPv6 from manual tunnel to automatic, none of my devices get an IPv6 address from the ISP. In the troubleshooting page, IPv6 address is also empty. I tried resetting the router but had no difference. We have another router (ASUS RT-53N) and it works fine.The ISP is using PPPoE for IPv4. In RT-53N I choose "IPv6 with DHCP-PD" and Interface "PPP". There're no such options in EA2700 though.

View 9 Replies View Related

Linksys Wireless Router :: EA3500 IPV6 Tunnel Resets To Automatic

Jan 27, 2013

I have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube.  My provider does not support IPV6.  Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have  firmware version 1.0.30 build 126544 2011-12-24.  Firmware update function says I got the latest version.

View 5 Replies View Related

Linksys Wireless Router :: Setting Up EA4500 SixXS IPV6 Tunnel

Sep 18, 2012

Need a guide to setting the Ipv6 Tunnel from SixXS On the cisco connect cloud?

View 2 Replies View Related

Linksys Wireless Router :: IPv6 Setup For E4200?

Jun 11, 2012

Our internet provider has no intention of providing a IPv6 DNS so I have a crippled at best service.  We live in an area where our only option is through satellite service, so changing providers in not in the cards, yet. 
 
If I "Disable" the DHCP Sever, the setup menu provides a method for me to force feed up to three Static DNS addresses, all with IPv4 addresses.
 
There are several locations that provide "free" DNS service, but how does one verify the security of such sites? Does Cisco keep track of the status of this kind of service or am I on my own?  Cisco seems to endorse two DDNS services, but for home use, the extra charges seem otherwise unnecessary, and do not yet address the IPv6 question.
 
The first few that I have investigated that do provide IPv6 service also provide their addresses in IPv6 format.  The E4200 menu does not seem to allow me to do that.
 
Am I going to be forced to live with crippled IPv6?  I have already discovered a software product that has failed since changing routers, but works if I take my laptop to a particular WiFi location.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GS Cannot Ping Any Of 192.168.10.X IP Addresses

May 8, 2013

I have a Linksys WRT54GS wireless router (10.77.79.1, 255.255.255.0) which hands-out DHCP addresses to my wireless/wired clients.  This router is connected to the cable modem which then connects to the wonderful World Wide Web.  Port 1 of this router is connected to a Cisco SG200-8 Small Business Switch (10.77.79.3, 255.255.255.0).  My Dell 2950 is then connected to the SG200-8.
 
I know I'm doing something wrong because I cannot ping any of the 192.168.10.X IP addresses from the 10.77.79.X network, and vice-versa. All VLANs on the SG200-8 are set at their defaults (1 and Trunked?). Are there any additional configuration steps I need to perform in the SG200-8 or WRT54G?Is what I want to do even possible with my hardware?

View 1 Replies View Related

Linksys Wireless Router :: Limited IP Addresses On E4200

Nov 29, 2011

setup the network at his church, they currently have a Cable modem, which hands out 3 external IP addresses, I have that plugged into a Linksys E4200 wireless router, and from the router a line into a netgear 48port switch which hard wires into the offices and a few more E4200s around the church. The linksys is currently handing out IP addresses to all the equipment on the network, the trouble is it only has a limited amount of IP addresses,(50ish wired?) and i am worried that it will become overloaded.  They are also trying to go gigabit as much as possible, as they pass a lot of files around internally.

1. Am I using the right piece of equipment to hand out the IP addresses? The modem will only put out 3, so do I need something instead of the E4200 to do this? If so any recommendations?

2. Do they make a switch that will plug into the modem that is gigabit that will handle internal IPs? I am happy to trash the netgear switch if there is something better to replace it.

3. How can i utilize all 3 external IP addresses? (Well 2 really, I have their VoIP phone system plugged into 1)
 
I am a low voltage contractor by trade and A/V is usually my department, I would like to get into networking, but on a scale of 1 - 10, I am only around a 4 in the knowledge dept.

View 2 Replies View Related

Linksys Wireless Router :: E4200 IPv6 Causes Win7 DHCP Client Crash?

Jun 9, 2012

When I enable IPv6 on my E4200, the Windows 7 DHCP client crashes. It also seems to crash the audio service, the event logger and a few other windows services.

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Reset To Factory Defaults / Enable IPV6 Auto

Aug 10, 2011

I flashed the firmware and the ipv6 automatic is on disabled and I cannot set it to enabled.the 6rd tunnel option I can change but that has not effect- in fact from what I looked up it seems to be something used by some cable providers.hate to have to reset the router to factory defaults and then reset the network up - just to see if i can get the option to set IPV6 auto to enabled.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Adds Certification For DLNA / IPv6 / Gold Log And UPnP

Sep 28, 2011

New firmware for the Linksys E4200 was released this morning that adds certification for DLNA, IPv6 Gold log, and UPnP.  It also addresses the Media Server issues that have been identified here in the community.Sept 28, 2011Last Firmware version:  1.0.03 (build 14)- Added supports of Native IPv6 over PPPoE Internet connection when only keep   alive option is selected.- Added supports of Native IPv6 on guest network if there are more than two   available IPv6 subnets- Added supports of Native IPv6 on Parental Control- Added supports of 3TB Hard drive with NTFS and HFS+ format- Improved firmware upgrade stability- Improved IPv6 WAN performance- Fixed media server unstable issue- Fixed Cisco LED flashing issue- Fixed some minor bugs- DLNA certified- IPv6 Gold logo certified- UPnP certified

View 1 Replies View Related

Cisco VPN :: 800 - How To Setup Both Ends Of IPsec Tunnel Using Software Client

Sep 29, 2011

how to setup a both ends of an IPSEC VPN tunnel using a software client such as shrewsoft vpn and an 800 series router?
 
I've tried following the instructions on cisco's site, but I don't really understand which interface I should use? Dialer, VLAN1 or UnNumbered to a Loopback?
 
I'm OK with most basic features of the router, but never had any luck with VPNs?

View 3 Replies View Related

Linksys Wireless Router :: E4200 / Can't Ping WAN IP

Feb 2, 2012

I'm using Linksys E4200 router.  I can't seem to ping the static WAN IP (from internally or externally).  All other connectivity seems to be fine.  I can ping the routers internal IP, as well as the cable modem and other external IPs.  But all port forwarding through the E4200 is failing.Should the default security/firewall setting allow port forwarding?  Or do some settings need to change?

View 2 Replies View Related

Linksys Wireless Router :: E4200 Could Ping But No Connection On Any Hosts

Nov 28, 2011

I purchased this router a few days after its release, and I was very impressed with its functions. I came from a DD-WRT flashed router with all the bells and whistles, and the E4200 lacked some features but I felt it was a fare trade off for the GHz & dual band.All was well with all my settings (quite a few to name QOS,forwarded, etc)I also updated the firmware when it came available and re entered same settings.

 Approx 3 months after use I had 0 WAN connection via eth0 or WIFI, when I logged into router I  was pulling a Public IP from my ISP. I could ping from inside the router but no connection on any hosts, very strange. Powercycling Modem/Router yielded same results.. I then backed up my vast amount of settings, and did a 30/30/30 reset.. With no configs I had no issue browsing on any host on my network. So I restored from backup and the issue was back again..So I did another 30/30/30 reset. Then went and reentered the exact same settings as before and the issue was gone.

View 4 Replies View Related

Linksys Cable / DSL :: Does WAG160Nv2 Support IPv6 Addresses Primarily For Gateway IP

Feb 3, 2011

Does WAG160Nv2 support IPv6 addresses primarily for the Gateway's IP and thereafter about all IPs that need to be entered via the web interface?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Won't Update / Ping Or Trace Route

Jan 21, 2013

I have an E4200 and have added it to my network with a new static IP and DHCP and firewalls off.It runs off my cable modem and router (Virgin Media Superhub) that has DHCP.When I tell it to do a firmware update, traceroute or ping it fails, just wont do any of them.

View 9 Replies View Related

Linksys Wireless Router :: Can't Ping Windows Computers With New E4200 LAN / WLAN

Mar 18, 2012

just replaced a WRT54G with E4200. Most functions work well. 4 wireless computers (1 Macbook, 3 Win 7), 1 wireless android, 1 wired Win7 computer, 1 ethernet connected hard drive, 1 ethernet connected printer. All computers can ping router, access hard drive, access internet, ping android and ping Macbook.However, router, nor any computer, can't ping Win7 computers. Apparently IP based connections between WinX computers is blocked. My real applications are to Remote Desktop Connect from 1 Win7 computer to another, or to run a DLNA music server on 1 Win7 computer, accessed by another. (the LAN connected computer is the server, accessed by a wLAN client. All worked fine on WRT54G router, but can't connect thru E4200.  When these apps failed, I tried PING, and that failed as well.All computer's IP addresses are properly served from E4200 via DHCP, and are visible thru the router's DHCP Reservation panel.

View 1 Replies View Related

Linksys Wireless Router :: Start Ping Command Directly From E4200

Oct 9, 2011

I recently acquired an E4200 Linksys router.Is it possible to connect to it using telnet (from LAN)? For example I would like to start a ping command directly from the router.I tried to telnet using command line shell from Windows and it failed to connect on port 23.

View 4 Replies View Related

Linksys Wireless Router :: E4200 - Unable To Ping Wifi Hosts From Lan

Nov 20, 2011

I've got a new E4200 router, Everything works just fine, but I'm unable to ping any WiFi hosts from my LAN, I can ping LAN from any WiFi Host.If I disable NAT on the E4200 I'm able to ping WiFi hosts but then all WiFi Hosts are unable to talk to the LAN.

LAN - 192.9.209.0
WiFi - 172.16.1.0

Same config runs perfect on my WRTG54GL.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Unable To Ping Wifi Hosts From Lan

Jan 27, 2012

I've got a new E4200 router, Everything works just fine, but I'm unable to ping any WiFi hosts from my LAN, I can ping LAN from any WiFi Host.If I disable NAT on the E4200 I'm able to ping WiFi hosts but then all WiFi Hosts are unable to talk to the LAN.
 
LAN - 192.9.209.0
WiFi - 172.16.1.0
 
Same config runs perfect on my WRTG54GL.

View 1 Replies View Related

Linksys E4200 Wireless Router / Unable To Ping Machine On The Internet Side

May 7, 2012

I am using Linksys E4200 wireless router. I connected two machines, this way.

|LAP1|--------(LAN ethernet connection)----------|LinksysE4200|-------(Internet wired connection)--------|LAP2|

On the Linksys E4200, the Internet wired connection side, I gave static IP address which is in the same network range as that of LAP2.When tried to ping from LAP1 to LAP2, ping doesnot happen. Any settings by which I can ping from LAP1 to LAP2.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Ping To Router Very Unstable

Sep 8, 2011

I noticed some serious random ping spikes in online games and found that the connection between my Laptop and the E4200 is very very unstable. Sometimes it works perfectly fine but at other times my ping will spike each 5 seconds to three or even four digits and back to normal. I never get disconnected but playing is obviously not possible.
 
I ran several pingtests through pingtest.net and got everything from 15ms ping 3ms jitter to like 400 ping 300 jitter.
 
Eventually, I pinged the router (192.168.1.1) and got delays between 2ms and 300ms for both the 2.4 ghz and the 5ghz network. The 2.4ghz channels are fairly crowded but the signal is perfectly fine and stable. The 5ghz band is totally free therefore interference shouldn't be a problem i guess.

View 2 Replies View Related

Cisco Routers :: 2811 - IPv6 Anycast Addresses

Oct 18, 2012

What are the IPv6 anycast addresses using for?, are they  some kind of broadcast? I have a  router 2811  I'm configuring ipv6, do I need to use these addresses?

View 1 Replies View Related

Cisco LAN :: E4200 - Cannot Ping / Connect To Wireless Router On Network Ip

Mar 14, 2012

I have set up three E4200 routers as wireless access points on our network.  They each have a static ip and the same subnet mask and gateway that our pcs have.  They also have a local address that I can connect to if wired straight into them.
 
I cannot ping or remote admin into any of them and I have enabled all the options to do so.  The routers seem to work fine as WAPs, providing internet and network access.

View 1 Replies View Related

Linksys E4200 Can't Ping New Access Point

Jul 4, 2012

I have a Linksys e4200 and a EnGenius EAP300. I setup new EnGenius AP to 198.162.1.5 and the Linksys is 198.162.1.1. The two devices are connected with Ethernet capble with a POE switch in the middle. Internet connection thru the Linksys works fine. However, the EnGenius does not connect to the Ineternet (Gateway is set to 198.162.1.1) Also when connected to the Linksys, I cannot ping the EnGenius.

View 1 Replies View Related

Cisco :: Can't Generate Pre-shared Key For Ipv6 Tunnel

Jan 18, 2013

I'm playing with ipv6 and trying to get a tunnel between two sites working (basically following this example url...

View 6 Replies View Related

Cisco :: 3560 - Missing IPv6 Tunnel Command?

Sep 17, 2011

I've finally got my 3560 switch IPv6 capable (IP Services IOS), but I've stumbled upon something strange: I can configure a tunnel interface, but I can't put the tunnel in ipv6ip mode. The command is missing. I can choose GRE, IP in IP, and a bunch of other things, but no ipv6ip. I'm a bit desperate here and probably I am going to have to live with it, but just in case? I need the IPv6 tunnel for an uplink to a tunnel broker which only supports this type of tunnel, and I'm surprised this is missing.

View 4 Replies View Related

IPv6 Tunnel Broker Service Behind Cisco PIX 506e

Feb 5, 2011

So I have a Cisco PIX 506e that I've modified a bit, but am quite happy w/ when it comes to performance and configuration (I can actually set up the VPN server w/o too much thought.) I also have a Mikrotik Routerboard 750, I'm no longer using it as my router due to a few config issues I had plus the fact I had to hard code my internet gateway's arp address into the device due to some issues.

What I am wanting to do, which I'm sure is possible and easily accomplished (I just don't have the time right now to try it) is set the routerboard up behind my pix and have it function as an ipv6 router, while the pix handles my ipv4 duties. I've already set up the routerboard w/ an ipv6 tunnel broker when I had it running as my router, I am just curious if it will work in a similar fashion when configured behind an ipv4 device.

View 2 Replies View Related

Linksys Wireless Router :: Get IPV6 Connectivity Using Rr?

Mar 1, 2013

How can I get IPV6 connectivity using rr. Does it has to be automatic or manual, Is there anyone with RR getting IPV6?

View 4 Replies View Related

Ping IPV6 General Failure

Jan 18, 2012

When ping ipv4 is succeeded.

C:Documents and SettingsLW>ping 10.1.1.1Pinging 10.1.1.1 with 32 bytes of data:Reply from 10.1.1.1: bytes=32 time=2ms TTL=64
Reply from 10.1.1.1: bytes=32 time=1ms TTL=64
Reply from 10.1.1.1: bytes=32 time=1ms TTL=64
Reply from 10.1.1.1: bytes=32 time=1ms TTL=64Ping statistics for 10.1.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

[code].....

View 3 Replies View Related

D-Link DIR-615 :: Setup IPv6 In IPv4 Tunnel With Tunnerbroker Service

Mar 24, 2013

Recently I wanted to setup IPv6 for my home network. I signed up for tunnelbroker.net service and was provided with IPs. Then I configured the IP address in my DIR-615. But It's not working..

Screenshot of IPv6 config (router) : Screenshot of my Win 8 network Config : I also tested at [URL] but failed...

View 3 Replies View Related

Cisco WAN :: Does Nexus 7000 Support Ipv6 6to4 Tunnel

Nov 23, 2011

Does Nexus 7000 support ipv6 6to4 tunnel?

View 3 Replies View Related

D-Link DIR-825 :: Firmware 2.05NA - How To Get IPv6 In IPv4 Tunnel Working

Jun 9, 2011

I have a Dlink DIR-825 B1 with firmware 2.05NA.  I recently reset it to factory defaults to make sure I didn't misconfigure something.

I have been struggling to get a IPv6 in IPv4 tunnel working with tunnelbroker.net.  I think the issue is a problem with the router itself and i'm not sure how to get it fixed.

All of my machines were getting IPv6 addresses (both windows, mac, linux) but none of them seemed to work.  All I was able to do was ping the gateway itself using the local lan address.  In each case they were missing a default IPv6 route.  If I added a default route then it would work.

I started looking at the packets using a network sniffer and the Router Advertisements all had a Router lifetime value of "0" which is RFC4816 speak for "don't use this router as the default router".  So Windows/Linux is exactly right by not setting a default route.  

The strange thing was that when I reboot the router I would briefly get a router advertisement with a lifetime of 1800s, the corrert prefix and dns server but then another router advertisement would come along 5 seconds later with a router advertisement of 0.

I have TCP' Other observations

... using 6to4 I would get working IPv6 address.  The difference again seemed to be the Router Lifetime.  But I want to use a permanent tunnel.  I have found 6to4 unreliable.

... the router never responds to router solicitations.  It only sends a router advertisement when it wants to.

... the router never responds to DHCPv6 when that is configured.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved