Cisco :: ASR 1001 - Adding Routers To NCS Prime?
Jan 20, 2013
This would be the first time I will be working on NCS for a client. There is completely a new install and I was just doing my reading to get my head around the overall working of the product. I had a small Q in mind which I wanted to ask here, while going the config guide, i could not find the way to add a router to the NCS prime. W have ASR 1001 in use along with switches. I read in some forum that NCS supported routers but couldnt find the way in the config guide unless i am missing somewhere. The NCS version is 1.0
View 6 Replies
ADVERTISEMENT
Dec 23, 2012
I was wondering if I am able to add a redundant power supply to an asr 1001 router that is in production without losing connectivity or causing any diruption to the Users - is it hotswappable?
View 1 Replies
View Related
Nov 1, 2012
I recently upgraded from WCS 7 to Cisco Prime Infrastructure 1.3 (1.3.0.20). I've successfully added my 5508 WLC, 7204 router, 4506 Switch and several other devices. The one problem I have not figured out is how to add my 50 + AIR-LAP1142N-A-K9 to Prime. I can see under Home > General > Overview that I have AP availability of: 53 but when I go to Device Group > ... > Unified AP > Cisco 1140 Series Unified Access Points there are no devices listed. I've tried to manually add them but they fail.
View 6 Replies
View Related
Apr 15, 2013
I recently upgraded from WCS 7 to Cisco Prime Infrastructure 1.3 (1.3.0.20). I've successfully added my 5508 WLC, 7204 router, 4506 Switch and several other devices. The one problem I have not figured out is how to add my 50 + AIR-LAP1142N-A-K9 to Prime. I can see under Home > General > Overview that I have AP availability of: 53 but when I go to Device Group > ... > Unified AP > Cisco 1140 Series Unified Access Points there are no devices listed. I've tried to manually add them but they fail.
Not a lot of clear documentation about this and I'm not sure what to try next.
View 14 Replies
View Related
Sep 25, 2012
When I add this as a device in Prime, it seems to handle this as some sort of generic device, at least it doesn't know that it's a WAAS.
This is what Prime shows when I've added WAAS to the device list:
No Device Info for the selected device IP Address10.y.x.7Product FamilyOwning Entity ID16249245_10.y.x.7NE ID16250325
View 0 Replies
View Related
Apr 9, 2013
I just got PI1.3, I'm new with it, and I don't know how to add devices. I have an 4500-X, an 3850 and 12 pcs. 2960S.
I see that are some out-of-the-box templates, but when i try to deploy, for example "medianet perfom" in Devices box I got "no data available"
What I have to configure on switches?
View 2 Replies
View Related
Mar 6, 2013
My company has purchased a second ASA for fail over reasons and I'm needing to attach it to my core router (ASR 1001). Currently I'm running the connection between my ASA and my Core as a /19 ie. ASA-10.10.10.2/19 -- ASR-10.10.10.1/19. I know the 2nd interface on the ASR will need to be on a different network segment then the first connection (10.10.10.1/19). What would be the best way to segment this out with out breaking up my /19?
Run /30 segments for each interface? Use a VLan ?
I don't want to use up my Internet rout able IP's on /30 segments. Attached diagram.
View 1 Replies
View Related
May 9, 2013
I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
View 2 Replies
View Related
Mar 12, 2013
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
View 4 Replies
View Related
Dec 22, 2011
we have 2 thompson HDSL routers connected to the internet. we want to combine them to have higher bandwidth and load balancing so we attached them to a linksys rv042 router. we are running a Xbox applications that require high speed internet streaming.
if the RV042 can combine those 2 high speed internet connections, without disconnecting.
View 1 Replies
View Related
Jun 13, 2012
I am pretty new to Cisco networking and setting up a test router to use from home to connect into our network. My organization would like for us to provide upper management with home office setups to give them the ability to work from home. We will provide all of the equipment of course (router, phone and workstation). my boss wants me to use some of our old decommissioned equipment to set up a test home office to see how efficient and feasible it would be. I have a Cisco 1700 router, Altigen IP720 phone, and Dell Optiplex 380 workstation.
View 2 Replies
View Related
Aug 26, 2011
I have 3 subnets that I all want to have my RV220W (1.0.2.4) as the gateway. Where can I add an alias into the router so all three subnets and communicate with it?
View 1 Replies
View Related
Jan 25, 2011
I currently have 1 cat 5 jack at my tv/entertainment area and will be needing additional jacks to add gaming consoles,streaming video player and internet ready tv at the same location.The current jack installed at that location is coming from a D-Link 8 port Gigabit switch installed in a different room.The switch is at capacity,all ports are full,so no additional availability there.My question is how to expand port availability at the entertainment area.Is it possible to put another switch or hub at that connection?Would there be a conflict with cascading a switch from one to another? I have a 25 meg fiber optic incoming service,so there is plenty of speed and bandwith available to handle these componets.
View 1 Replies
View Related
Oct 15, 2012
Today I had to reset the router completely to factory default, if I was adding services to the forwarding or UpNp service management, suddenly it stopped adding the new ones.Now after starting all over it's having the same behaviour, see below my services, normally you can have 30 rules in this list but I cannot add new ones now.
Now I want to insert a new service IMAPS for port 993 so I go to service management.Then press "add to list" see below for result.It is there, then press OK and the screen closes, now if I choose a service from the list, it is not there !!
View 5 Replies
View Related
Jul 28, 2011
I am somewhat of a neophyte at networking and I have a question. I have a small business network using a secure wireless router connected to my cable modem. We have a DVR security system which we would like to monitor remotely. I would like to keep the DVR separate from my secure wireless router for security reasons. My thought is to connect the DVR through a cable or wired modem into my cable modem. Do you folks think this will cause an issue with the wireless router which uses DHCP to determine the IP address?
View 1 Replies
View Related
Jun 3, 2013
I have a Netgear ADSL2 router connected to my main computer and want to add a new Belkin AC900db via plug link at the other end of my house so that we have wireless coverage throughout the whole house. It was working at first but the belkin needed an update which I did now It won't work at all?
View 3 Replies
View Related
Feb 27, 2013
Need to add a PIN for my wireless printer into the router control panel - ? Where do I find this control panel? Belkin F5D8236
View 1 Replies
View Related
Dec 22, 2011
Add wireless conection that can't see network. I have an existing working hard wired network. I want to add a wireless connection that has access to the internet, but not to the other devices on the original network.
View 2 Replies
View Related
Apr 15, 2013
I've an ASR1001 with 15.1(2)S code on it connected to out ISP, we've been get some complaints about performance and I'm seeing drop on the output policy. Checking the bandwidth consumption we have plenty spare when drops are occuring, there's 300Mb/s. Details below, any suggestions gratefully received
The policy is to guarantee the following bandwidth:
Outbound policy:
class 1 => 50% guaranteed
class 2 => 8% guaranteed
class 3 => 1% guaranteed
class 4 => 5% guaranteed
class 5 => 1% guaranteed
class 6 => 5% guaranteed
class => 7% guaranteed
class 8 => 7% guaranteed
class default => not configured
config :
policy-map priority
class 1
priority percent 50
class 2
priority percent 8
class 3
priority percent 1
class 4(code)
View 9 Replies
View Related
May 15, 2012
I just would like to confirm if the ASR 1001 with IP Base license can support the normal BGP features such as remote-peering IPV4, Local-AS.
I am not looking for advanced features such as Route Reflectors, VPLS, L2 VPN, etc.
View 1 Replies
View Related
Dec 29, 2012
i have 1001 ASR which boots up ok but shows a warning "filesystem is not clean" and thereafter the image is validated well, it shows up the following two messages and just goes idle from there. [code]
View 6 Replies
View Related
Feb 20, 2011
We are going to purchase ASR 1001 with ipbase, BGP is our basic requirment if we purchase ipbase(SLASR1-IPB) it will support BGP.
ProductDescriptionASR1001Cisco ASR1001 System,Crypto, 4 built-in GE, Dual P/SASR1001-PWR-ACCisco ASR1001 AC Power SupplyCAB-IND-RAPower Cord India, Right AngleSASR1001UK9-32SCisco ASR 1001 IOS XE - ENCRYPTION UNIVERSALSLASR1-IPBCisco ASR 1000 IP BASE LicenseM-ASR1K-1001-4GBCisco ASR1001 4GB DRAM
View 3 Replies
View Related
Mar 4, 2012
is the ASR 1001 either with IDC OC3 or T3 support VPLS and what is the limitation, what is exactly support is it full functionality of VPLS?
View 4 Replies
View Related
Sep 3, 2012
I just need to start building the configuration of an ASR 1001 but I do not know how gigabitethernet interfaces are named on these routers? Are Gi0/0/X or Gi0/X ??
View 1 Replies
View Related
Apr 29, 2013
I am replacing my 2900 Internet router with a ASR 1001. I am really not doing anything to fancy on the configuration just routing traffic from the internal LAN to our ISP connection. With the new ASR 1001 there is a configuration for VRF Definition Mgmt-Intf do I do anything with this? There is also a interface for vrf forwarding. At this point we are just running IPv4. The plan was just to configure the GigabitEthernet interfaces but I wanted to make sure if I should try and configure VRF.
View 2 Replies
View Related
Mar 7, 2013
We have an existing WAN connection from a Cisco 2821 router to Time Warner with a single mode fiber connection using the following SFP:We have a ASR 1001 router configured to replace the 2821 router. When I connect the fiber into the ASR 1001 router the link does not come up. I have used the above SFP without success and the following SFP.I have seen Cisco documentation that only certain SFP modules are compatible with ASR router, but I believe the second SFP I listed is compatible. As a test, I connected my ASR router to a 3750 switch using long haul SFP modules on each end so I know the SFP module works. The only downside to this test is I only had a multi mode patch cable. Are there specific settings on the ASR interface that need to be set to allow this connection?
View 1 Replies
View Related
Jan 31, 2012
I have an issue with an ASR 1001. The problem occurs with MQC shaping applied to a gigabit interface in the outbound direction. The CIR of the provider we are using is 100Mb/sec, so we are shaping to that value. However when reported traffic levels are about 60Mb/sec, we see a steady increase in output drops. [code]
I have also tried increasing the hold queue, however this does not work with the drops. Increasing the shaping rate to 200Mb/sec gets rid of almost all the drops (not quite all!) but is not what we need. I think that we should see some drops when rates spike above 100mb, however the amount we are seeing seems excessive?
View 1 Replies
View Related
Aug 8, 2012
We have problem con EIGRP and two ASR 1001 in High Availability. ASR2 have received all route (100 route) from PE, but in ASR1 doesnt received all route (75 route) from PE or from other ASR02. All PE have all route. The ASR1 when modify or lost some route dont update to the ASA. see diagram.
View 5 Replies
View Related
Feb 5, 2012
I have a need to capture traffic on an ASR 1001 subinterface, but what I have found is that the Embedded Packet Capture feature is not supported on this platform. Are there any simple alternatives to capture egress traffic on a subinterface or am I SOL? This is a walk in the park on normal IOS routers...
View 1 Replies
View Related
Aug 14, 2011
We've recently bought a cisco asr 1001 Router and I have a number of interface slots. I want to populate these with fiber modules.
Which fiber modules are compatible? Are the regular SFPs ok to use or is there a special asr series of SFPs to use?
View 15 Replies
View Related
Jul 19, 2011
I'm trying to configure Tacacs on Cisco ASR1001, and the Tacacs server is Cisco ACS v3.3, the ACS won't pass the authentication, complaining bad request from NAS, key mismatch - which I compared millions of times on both ASR and ACS sides. [code]
View 2 Replies
View Related
Aug 31, 2011
A customer recently purchased an ASR 1001 under the impression it could replace their old 3662 router and ASA 5505. The ASA is configured for their SmartFilter proxy server (N2H2), and I am having a heck of a time finding any documention on how to configure this. I found the following: To use SmartFilter with Cisco IOS firewall, install the SmartFilter componentsand use the IFP plugin (off-box). To configure the Cisco IOS for SmartFilter,use the Cisco document Firewall N2H2 Support located on the Cisco Web site,[URL]Well, I found the Firewall N2H2 Support document [URL], but the ip inspect command doesn't seem to work on the ASR. Is there any way to make this work or does the ASA have to stay in line?...
View 3 Replies
View Related
May 29, 2012
How can i find the list of features supported in ASR for various license
1) IP Base
2) Advance IP Services
3) Advanced Enterprise Services.
View 1 Replies
View Related
