Cisco Application :: ACE4710 Is Not Able To Link Directly To APP / WEB Server?

Aug 31, 2011

We recently configured a setup to loadbalance 2 application server using ACE4710.  Initially the configuration was to link two app servers directly to ACE4710 without connecting to a Switch, but later, it was advised that ACE4710 is not able to work without connecting to a switch. 
 
1. ACE4710 is not able to link directly to APP/WEB server, but it must go through a network Switch.
 
2. If item-1 above is true.  We used to have a older Cisco Loadbalancer which is able to link directly to WEB/APP servers. What is the reason or advantage of removing this feature?

View 7 Replies


ADVERTISEMENT

Cisco Application Networking :: CSS11503 To ACE4710 And Server Side NAT

Dec 16, 2012

We have a CSS11503 that is currently being used to accept incoming HTTPS and SSH connections on a specific VIP and then PAT those client connections.  I understand that it also PATs the server initiated connections. [code]

View 1 Replies View Related

Cisco Application :: ACE4710 Insert Cookie - Does It Overwrite Server Cookie

Mar 28, 2012

I was trying to implement stickiness based on cookie. Server inserts a cookie and sends it to the browser. I learned from app team that this cookie is changing dynamically during the session, so stickiness based on server’s cookie doesn’t work.
 
Now I want to investigate into possibility of ACE to insert a cookie. My question is: ACE feature of “cookie insert”: does it add additional cookie into http header without removing server cookies or it deletes the cookie(s) that server put into http header and replaces them with its own cookie?

View 1 Replies View Related

Cisco Application :: Cannot Telnet To ACE4710

Sep 27, 2011

I have a problem, recently I can not telnet to the ACE 4710, the ACE version is A4(2.0). I can enter by web and console but not for telnet.  I try to give more resource to the admin context but it doesnt work.

View 1 Replies View Related

Cisco Application :: ACE4710 - Unable To Perform End To End SSL?

Nov 9, 2011

I have to load balance traffic between 2 servers sitting behind the LB. The webservices are on HTTPS/8443. I followed the end to end configuration guide for SSL. No success.
 
Here is my configuration -
 
rserver host nms1
ip address 10.29.36.31
conn-limit max 4000000 min 4000000

[Code].....

View 3 Replies View Related

Cisco Application :: ACE4710 TCP Connection Reuse

Jun 8, 2011

We have a rather strange issue, and I'm not sure it's really a problem with the ACE or not. We created an HTTP parameter map called "TCPreuse" and applied it to a virtual server. A show conn detail displays "[ conn in reuse pool : FALSE]" for all connections pertaining to this virtual server. The rserver in question is Linux(Ubuntu) + Apache.Next we applied the HTTP parameter map to another virtual server - this time IIS7 + Windows Server 2008. There are plenty of entries "[ conn in reuse pool : TRUE ]" when I do a "show conn detail".What could the web servers be doing differently that would cause the connection reuse to work on one virtual server and not the other?

View 1 Replies View Related

Cisco Application :: Upgrade ACE4710 With Different Context?

Sep 16, 2012

I need to upgrade 2 active-standby cisco ACE4710, the issue is I cannot access FTP/TFTP/SFTP server via Admin context but can be accessible via other contexts.

Can I copy the ACE system software file from FTP/SFTP/TFTP server to image: directory durectly or need some other way around ? I could see the option is available to copy ftp: to image: via other context.

View 2 Replies View Related

Cisco Application :: One Interface Configuration For ACE4710?

Jun 15, 2012

My customer they do not want change their real server IPs. So I need setup one interace (one armed) for them on ACE4710. Who had this sample configuration? (CSS has this but it seems to be not compitable with ACE)

View 4 Replies View Related

Cisco Application :: ACE4710 To Perform SSL End-to-end Configuration

May 31, 2012

I am attempting to configure an ACE4710 to perform SSL end-to-end confguration. i.e. SSL termination - load balance - SSL initiate to backend server.The configuration appears to work fine in a test lab using any old web server, however when I peform the same configuration in the production environment it does not work. It appeatrs from a capture run on the ace that the ace is reseting the tcp connections after communicating with the back end server. The main difference I can think of in this environment is that the cert and key pair the ace is using where exported from the backend server, i.e. both the ace and the backend server have the same certificates and keys. Is this allowed? how to troubleshoot why the ace resets the connection.

View 6 Replies View Related

Cisco Application :: Configuring URL Filter In ACE4710

Jul 10, 2011

I have 2 ACE4710 in HA enviroment, they receive connection from Internet. What I need to configure is following:
The ACE have configured two URL, with the same port and VIP Address, for example:
 
URL-1: www.xxxxx.com
URL-2: www.xxxxx.com/Admin
VIP Address: 10.10.10.10
Port: 8443
 
All clients point to unique VIP and Port configured, I need to know if I can apply any filter or rule that allows me to distinguish when a customer goes to the URL1 or URL2.If any client try to access to URL-2, your traffic must be deny.In summary, from Internet I should be able to go only to URL-1.

View 3 Replies View Related

Cisco Application :: GSS 4492R Configuration With ACE4710?

Dec 8, 2010

I have to deploy the Cisco GSS in our 2 dataceters globally seprate IP ranges to loadbalance the exchange 2010 environment with Cisco ACE 4710 series SLBs.  The scenario is to deploy  one GSS + ACE on each datacenters and our nameserver will point to both GSS's IP addresses to get through. Incase primary site "site A" goes down name server will point the client's request to "site B".
 
What will be the physical setup of the GSS here and what configuration should on SLB ACE will make it work? Do GSS and ACE need to be in the same vlan? is this necessary to use Both interface of the GSS to get things working?  How the GSS will check the health check on ACE if they both are on different vlans/ip range? Our ACE will be in routed mode do we need to assign the Real server default gateway as ACE inside interface with the server farm or just do the SNAT of the client IPs so the request can come back to ACE?

View 6 Replies View Related

Cisco Application :: ACE4710 - Failover Over VLAN

Dec 3, 2011

I have HA configuration for two ACE4710. FT between Ace's is configured as L2 (V LAN). Active ACE is sending heartbeats, but switch shows lot of 'input errors' on ingress and this is a major problem. FT is logically not working (there is no connection between these two Ace's over V LAN). There is only L2 configuration, with speed and duplex auto, no other special configuration.  When I connect Ace's directly, FT is working without problem.

I can see lot of errors on input direction (from ACE) to switch port, that means, L1, or L2 problem, but direct connection (using the same Ethernet cable) is working. I tried 'shut/no shut' on both sides, set duplex/speed,... without success.
 
ACA IOS version is A4(1.x).

View 4 Replies View Related

Cisco Application Networking :: Possible In ACE4710 Appliance To Configure A SIP TLS

Feb 11, 2013

Do you know if it is possible in ACE 4710 appliance to configure a SIP TLS ?The SIP probe we have in the configuration guide it is only for clear text. for Lync 2013 we need to establish first a TLS session and then within it, send an SIP request..IS it possible in any version? I tried also to configure a HTTPS probe but it fails as it sends a GET which the Lync SIP server doesn't understand.

View 1 Replies View Related

Cisco Application :: ACE4710 Deployment Models Required

May 31, 2011

ACE 4710 deployment model.  We'll be doing an eval later in the year, but I'm just looking to understand the architecture.We have a stack of 3750 switches with a single VLAN (10.1.1.0/24).  Connected to that stack is a pair of web servers (10.1.1.5 and 6) that we want to provide load balancing/failover for.  Some of the clients are located right there on that same VLAN.  Other clients may be coming from other spots in the infrastructure.It sounds like I could put a pair of 4710s connected to that stack of switches, in a single arm deployment?  And then the virtual IP and the real servers would all be 10.1.1.0/24.  Maybe use an etherchanel to connect each 4710 to two 3750s?

View 9 Replies View Related

Cisco Application :: Putting ACE4710 Into Running System?

Apr 17, 2012

I'm implementing and found out some  issues are unresolvable on ACE4710. This network have been running on a server without LB. Now the second server comes up. We choosed to implement with Routed Mode.This network Peak @ 300Mbps. Now on we're doing the first context which is function as content  web-farm. In near future, 2nd context which takes care of indexing  web-farm when they buy more server.
 
From following diagrams.I browsed from internet into this service. "show service-policy" shown  as '0' (counter was not running). I guessed that there is something  wrong in FW configuration. So I isolated out FW. Then I plugged-in  my PC into network 30 (192.168.30.X) in front of this LB, then browsed  into LB's VIP (192.168.30.1). LB  "show service-policy" came up BUT  there is nothing return to my PC (client). "show conn" on LB as  "SYNSEEN". What's SYNSEEN?! Some meaningful.
 
Then I tried to figure out with a PC running 'apache' and took the  place of real server. "It works!" returned from LB/Server. "show conn"  became 'Establish' Programmer guy said if I browse into web-farm  (i.e. content web-farm) directly pkt will be redirected to indexing  server. But they said it will be L7 redirection. Not LB/Network level. 

View 5 Replies View Related

Cisco Application :: ACE4710 - Microsoft Windows CPU OID Changes Between Reboots

Oct 14, 2012

On my ACE4710s I'm using least-loaded predictors monitoring Microsoft Windows CPU usage. There are times when the MS Windows CPU OIDs can change between reboots. Any way for the ACE to automatically adjust to the new CPU OIDs and continue to get accurate CPU usage values?

View 1 Replies View Related

Cisco Application :: ACE4710 Started To Continuously Reboot?

Mar 3, 2010

one of our 2 ACE boxes in FT group suddenly reboot-ed from active state and now it continuously reboots with the following error:
 
insmod: error inserting '/isan/bin/klm_octeon_device.klm': -1 No such deviceerror inserting /isan/bin/klm_octeon_device.klmDaughter Card Not Found. Rebooting..INIT: Sending all processes the TERM signal...

View 10 Replies View Related

Cisco Application Networking :: Does The ACE4710 Support Custom Protocols

Jun 1, 2011

For server load balancing, does the ACE4710 support custom protocols? We'll be using HTTP for server health monitoring, and to determine if a server is up or down. But the client/server application is custom, and includes a lot of non-standard ports.  Can the server VIP handle generic TCP connections?  For example client1 connects to the VIP on http, but then later client1 switches to using tcp842 (a custom protocol, not http).

View 5 Replies View Related

Cisco Application :: ACE4710 Troubleshooting Connection Failure From Client

Nov 12, 2012

I have a ACE4710 setup to load balance a couple of web servers. The real servers all show as inservice as do the propbes and serverfarms/virtual servers. If I ping the Virtuual server ip address I get a reply but it I try to access VIP via telnet or web browser. I get a connection could not be open error on the client.The question is how do i determine where the error is comming from so far I can not tell if the client is getting through the acl or not.I have used the trouble shooting guide and nothing has worked to determine the cause so far. show service-policy int479 detail does not show an increase in the hit count when I try to connect.show stats conn does not show an increase in failed or timed out connections when i try to connect. [code]

View 3 Replies View Related

Cisco Application Networking :: ACE4710 - Can't Assign IP Address To Physical Ethernet Port

Jan 4, 2013

My customer wants each ACE4710 (of a highly available cluster) to have its own, dedicated port for management purposes.
 
According to documentation, IP addressing can be applied to VLAN interfaces, so in order to satisfy the requirement, I should make one port belong to an "access VLAN X", and then apply IP addressing to the corresponding "interface VLAN X". This should satisfy my customer´s requirement in an indirect way.
 
But... ¿ Can´t I just configure IP address on one of the 4 ethernet ports in order to save the work of building the aforementioned VLAN? I am asking this since I do not have access to a real box in order to verify.

View 2 Replies View Related

Cisco Application :: ACE4710 Appliance To ANM Virtual Appliance NATed

Oct 12, 2011

We have an ACE Appliance in a DMZ and the ACE Appliance's Admin Context IP is translated between ACE and ANM. The ANM Server does not get translated. It is just the opposite then in another Community discussion.
 
Our Problem: When adding the ACE4710 Appliance to the ANM imported Device List, we use the ACE's NATed Admin Context IP. Import works well, but ANM reflects the Admin Context IP with it's real configured IP. Polling the ACE Appliance does not work therefore.
 
Is there a possibility of telling the ANM, that the ACE has to be polled through a NATed IP? I could not find a field to set a NATed Mgmt IP.
 
Configured IP on ACE Admin Context: 192.168.0.10
NATed ACE Admin  Context IP:           172.16.0.10
 
Imported ACE with IP 172.16.0.10 into ANM, but ANM polls for Rserver, Vserver, Probes, etc. via 192.168.0.10 - which is not reachable from the ANM.

View 2 Replies View Related

Sharing :: Share Application So That Other Users Can Directly Use It In Network?

Feb 20, 2013

How can i share application so that other users can directly use application in network without installing in his/her system. I have ubuntu server 12.0.1 installed and users are using windows 7. I will install any other os as server if necessary.

View 5 Replies View Related

Cisco Application :: CSS 11503 Ether-channel Configuration For Redundant Server Link

Jun 18, 2011

I have already raised this discussion on "LAN, Switching and Routing" group. But I guess this is the right group for my queries. So I am sending my queries in this group again.
 
We are using CSS 11503 with one 16FE line card. We have connected 3 servers with redundant link. So FE1-2 in Server1, FE 3-4 in Server2 and FE5-6 in Server3. Our system team has configured APA in their servers as they are using HP-Ux.
 
1) Do we need to do any configuration at line card.

2) Do we need to do ether-channel at loadbalancer end. if yes, can you share me any cisco doc on how to do it.

View 1 Replies View Related

Cisco :: Server Plugged Directly Into Firewall

Jan 31, 2011

Can I directly plug a server into an inside interface in a firewall (Cisco ASA 5510). I'm just confirming that I don't need to have a switch between them.This is the only server behind the firewall.

View 2 Replies View Related

Cisco Firewall :: ASA5505 / Pcs To Get Their IP Addresses Directly From DHCP Server?

Feb 7, 2012

We have a Cisco 5505 ASA fireawll at a remote site. I can get the firewall to issue the IP addresses to the pc's, Is there a way for the pc's to get their IP addresses directly from our DHCP server?

View 3 Replies View Related

Cisco Application :: ACE 4710 Server In Multiple Server Farms

Jul 23, 2012

I put multiple rservers in multiple server farms?
 
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
 
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it?  Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.  

View 1 Replies View Related

Cisco Application :: CSS 11503 - Server-to-server Load Balancing?

Feb 16, 2012

I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
 
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
 
interface 1/1
   trunk
   vlan 1
    default-vlan
  vlan 555

[code]....

View 3 Replies View Related

D-Link DIR-655 :: How To Connect Internet Lan IP Directly

Dec 11, 2012

We have a DIR 655 router that I have set up with LAN and WiFi, all good.Today we received our mast and antenna from Vodacom (ISP) with the Public IP's to enter into the router. We connected the LAN cable into the Internet Port and did a manual Internet Static IP setup.  But as soon as we click save it says:  Type is not for 3G...  How do I go about entering the public (static) IP's we received from the ISP in order to get the Internet operational?

View 8 Replies View Related

Cisco Switching/Routing :: 6500 Ping Packet Drop From Core-Switch To Directly Connected Server

Oct 24, 2011

I have an Cisco 6500 CS and there is a Cisco Unified Communication Manger Server connected directly to the Core Switch.I tried to change duplex and speed ( fix and auto ) for both sides, but the same problem.

View 9 Replies View Related

D-Link DIR-825 :: Disconnections - Wired Directly To Router

Jul 18, 2011

I have had my DIR-825 for a year and half. My computer that is wired directly to the router keeps losing the connection to the router - unable to obtain an address.  All of my other devices (that are connected via wireless) still hold the connection with no issues.  I've checked the cable, unplugged/plugged back into the router, and it shows connection on the network card on the back of the computer.I have used the system interface to ensure the address is a valid one.  I have powered up and down the computer multiple times and have also powered down and up both the router and the cable modem.

View 1 Replies View Related

D-Link DAP-1522 :: Do Devices Talk Directly

Apr 14, 2013

Do the devices connected to the DAP-1522 communicate directly with each other or do they communicate through the router.My DAP-1522 is set up as a bridge connected to my DIR-825.  The reason I ask is I've set up an HTPC connected to the DAP-1522 and I also have media devices connected to the DAP and am wondering if they'll communicate with each other directly or if they have do it by going to the router and back.  That way I can use my HTPC to serve media to my devices at local speeds.

View 1 Replies View Related

D-Link DCS-942L :: Access Camera Directly And RTSP?

Apr 6, 2012

I can access my DCS cameras directly using several iPhone apps such as IP Cam Viewer Pro. Is it possible to access the camera directly using a web browser (I have tried without success) e.g. do you need to use a specific port?Also, the DCS-942L has RTSP. I am not clear as to the difference between RTSP and HTTP streaming of video, any resource that clarifies with respect to D-Link cameras?

View 2 Replies View Related

D-Link DIR-655 :: Connect 3g USB Modem To Router Directly Through Usb Port?

Jan 24, 2013

Can i connect my 3g USB modem to my dlink router directly through the usb port.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved