Cisco Firewall :: ASA 5510 / PAT Different WAN IP Tp Internal Host?
Dec 14, 2012
We just changed ISPs and now have a /29 routed subnet to be used on our ASA 5510 (8.4) instead of the one public ip we had before.There are a couple of PAT translations that were previously setup on the "interface" address which i now want to assign to a different ip address further in my subnet.
So i just changed this:
object network BMMM
nat (inside,outside) static interface service tcp smtp smtp
to:
object network BMMM
nat (inside,outside) static other.external.ip.in.subnet service tcp smtp smtp
And assumed that this would work,y it does not, and this leaves me unable to contact that machine from the outside.And shoud i also change my access-list?The relevant access-list rule is:access-list outside_in extended permit tcp any object BMMM eq smtp
View 5 Replies
ADVERTISEMENT
Feb 20, 2012
I am working on replacing our Checkpoint Firewalls with ASA's, and am running into the following NAT problem. On some of our Checkpoints, there are external NAT's that are mapped to multiple internal hosts based on ports.Is there any way to translate that to the ASA? I'm not sure the ASA will let you have multiple internal hosts mapped to one external IP using static NATs. The main issue, is these are alarm panels that receive data from external hosts (the traffic is initiated externally on the Internet) so I can't use dynamic PAT with this.
View 1 Replies
View Related
May 13, 2012
I am not very familiar with ASA 5520 yet.I have been able to allow the OUTSIDE world to connect via SSH to the intermal host 172.17.2.50 on my DMZ network. I've created a NAT rule and an ACL as written on the configuration below.
Now I need the INTERNAL network to ssh 172.17.2.50 but ASA stops me with the following error: [code]
View 2 Replies
View Related
Nov 26, 2011
I am new to the ASA series and I am at a complete loss as to why I cannot configure this router to forward SMTP and RDP traffic to an internal host.
The packet trace tool in ASDM shows complete end-to-end connectivity for RDP but it still fails to connect from outside. This is my config file, what I need to change in order to make it work?
View 19 Replies
View Related
Nov 1, 2012
I am working on an ASA 5510 on 8.4 IOS and need to know how to limit icmp to just a single host? What I would like to do is be able to PING from the Inside interface 10.X.X.X to host 4.2.2.2 on the Outside, but thats it no other host would be PINGable.I tried MANY different access-list statements but the only way I can get icmp out and working is using the "fixup protocol icmp" but then everything is PINGable and the ASA does not block anything.
View 3 Replies
View Related
Apr 26, 2011
I am trying to telnet to my asa 5510 from the core swith,however i received the below msg,how enable it?
172.30.1.100 is the inside interface of the asa
CITYCORE#telnet 172.30.1.100Trying 172.30.1.100 ... % Connection refused by remote host
CITYCORE#
View 8 Replies
View Related
May 7, 2012
ASA 5510
Ver 8.2(5)
I have been looking all over the place for the answer of how to allow clients on an IPSEC VPN to ping from host to host.
View 4 Replies
View Related
Jun 11, 2013
I've been following most of the comments in regarding how to allow communication between two internal networks on a ASA5510 8.2.5 But I am still a little confused about to how to set my firewall. I made chages to it and still do not have the desired results.
I need to allow comunication between Interface 0/1 and Interface 0/2. See configuration file with fake or dummy ip address below.
ASA Version 8.2(5)
!
hostname ciscoasa
domain-name lxx.com
[Code].....
View 1 Replies
View Related
Sep 18, 2012
I've tried a bunch things but it didn't work, I'm about to gave up! :-/
I have the following scenario:
ASA5510 - v8.3(2)
Interfaces
ETH0/0 = outside = 189.xxx.xxx.129
ETH0/1 = inside = 10.xx.1.15
[Code]....
What should I do to get the SIP and 8080 port working on my Public IP, likewise just as access from my browse the http://189.xxx.xxx.129:8080 and get through directly to my internal server 10.xx.xx.61 ?
View 5 Replies
View Related
May 17, 2012
Having trouble with a couple items. First of all, should I be able to ping the inside interface of the ASA from all internal subnets assuming all of these subnets/vlans are directly connected to the same L3 switch? I can ping the ASA inside interface from our L3 switch, but I cannot ping the inside interface from a host on a different internal subnet. I have setup static routing on the ASA [
route inside 10.10.96.0 255.255.248.0 10.30.1.1 1]and verified that I can ping the host [10.10.96.212] from the ASA inside interface [10.30.1.5]. The inside interface is on the 10.30.1.x/24 subnet. My host is on the 10.10.96.x/21 subnet. From the ASA I can ping 10.10.96.212, but I cannot ping 10.30.1.5 from 10.10.96.212. I can however ping 10.30.1.1 from 10.10.96.212.
This leads to my next issue, which is trying to setup the ASA to work concurrently with our current firewall. I'm doing this in order to transition to the ASA. I'd much prefer to cutover inbound NAT a little at a time vs. doing it all at once. Our current firewall is setup at 10.30.1.2 and this is the default route on our L3 switch (0.0.0.0 0.0.0.0 10.30.1.2). So my question is, if I setup an inbound NAT to one of our web servers on the 10.10.96.x subnet, will I be able to get it to route back to the ASA as opposed to ending up in asymmetric routing **** since the default route points back to our other firewall?
View 2 Replies
View Related
Apr 16, 2013
I am having a problem getting my ASA to work properly. I attached a diagram for reference and most of the config is below. When I finally got it to route properly between 2 sub nets on the internal network, the NO NAT statement broke routing for the VPN Clients who rely on a NAT statement for the same sub net that is listed in NO NAT access list. I can get one of the 2 to work by replacing NAT statements but can't figure out a combination to allow routing for both the internal sub nets and the VPN clients to work.
It's been about 5 days of tweaking this thing just to get the internal routing to work correctly and when I finally did I broke VPN client access. To note, the VPN clients can still log in and get a session going, they just can't get anywhere once they are in. I also think there's a lot of stuff in this config that is not needed like a lot of the object groups, etc. but I am being very careful about removing anything. I took over support of this ASA after someone else put it in place and over this past weekend we moved it to a new building and new ISP and that is when I had to get it to route between sub nets. The main point of this move was to remove building 1's reliance on building 2 for Internet and outside email access in the event that building 2 is not available (it is close to water and this has happened more than once over the past year).
So that is why I can't go with the smartest option of just keeping the routes on the router in the other building. I also know the 1600s are ancient but they're all we have for now. I can provide those router configs also but they are VERY basic, all static routing. The IP for the Cisco router on the same sub net as the ASA is 192.168.42.254.
This is the statement that allows the routing to work between the 2 internal sub nets but breaks VPN clients: nat (INSIDE) 0 access-list NO NAT
This is the statement that allows the VPN clients to work but breaks the internal routing: nat (INSIDE) 0 access-list INSIDE_nat0_outbound
The rest of the config is below the diagram.
ASA Version 8.2(2)
host name Cisco asa
domain-name default.domain.invalid
enable password - encrypted
password - encrypted
names
dns-guard
[code]...
View 7 Replies
View Related
Nov 28, 2012
Version: Cisco ASA 5510 8.4(4)1
I've installed cisco asa 5510.
When I "show local-host all detail connection "
Normal situation:
105 myfailover:10.255.255.2/0 NP Identity Ifc:10.255.255.1/0,
idle 0s, uptime 1D14h, timeout 2m0s, bytes 18196822
But I got this output ( timeout - )
[URL]
View 0 Replies
View Related
Feb 4, 2013
I have inherited an asa 5510 whit 4GE SSM module installed. The asa runs fine, but i can not use the 4GE SSM ports. Using ASDM or console i can get and configure the gigabitethernet1/x ports but i can not get traffic on it. The ping from the console to the ip address of the Gigabitethernet1/0 is successful. On switches or hubs connected to those ports i can not see the port's mac address. The two Internal-data0/0 and Internal-data1/0 are down and i can get they up. How to configure 4GE SSM or ASA internal-data ports.
View 8 Replies
View Related
Jan 19, 2013
Is it possible to perform static Nat's through an internal network?I have a ASA 5510 with a public outside interface (let’s call it 68.68.68.1), and I have an inside private IP address (192.168.1.2/24). The inside IP address leads to a 4900m with that interface being configured with a 192.168.1.1 (no switching). On the 4900 M I have several VLANs one of them is an internal DMZ of sorts. (192.168.2.0/24). Within this DMZ network are several Web servers which need to be associated a public IP address (68.68.68.x).
Every time I configure a static Nat to associating a public IP address with an internal IP address within the DMZ, packet Tracer on the ASA informs me that the packet gets dropped at the static Nat and I cannot figure out why this is so.Safe it to say my question still stands is it possible to Nat (68.68.68.222 to and 92.168.2.60) given the configuration above, and how would I go about configuring in such the manner above so that I acn apply static nat through the 192.168.1.0 network to reach the 192.168.2.0 network.
View 11 Replies
View Related
Apr 22, 2012
I am tasked with transferring all clients from one subnet to the other. I figure the nicest way to do this is to temporarily have the subnets talk to each other in an endeavour to avoid as much downtime as possible. The two internal subnets are:
192.168.0.0/24
192.168.43.0/24 (the intended migration network)
I am beating my head against the desk here as I dont seem to be getting anywhere after the changes I have made. The current configuration is as such:
ASA Version 8.2(5)
!
hostname ciscoasa
domain-name *****
enable password ***** encrypted
passwd ***** encrypted
names
[code]......
Upgrading the firmware is not really an option?
View 3 Replies
View Related
Sep 25, 2012
I was just wondering if it's possible with an ASA 5510 to connect to the external IP address of an internal server from inside the network. I have already set up dns doctoring for dns lookups, and everything is working fine there. We have an application inside the network that tries to connect straight to the external Ip of another internal server. where to look in the ASDM 6.4?
View 2 Replies
View Related
May 12, 2012
I have an ASA 5510 configured 3 interface Internet_AAPT, Internal_Network and Server_Network. The server network works fine as is able to connect to the internet and services like port 80 work from the internet in. But from the Internal_Network can only get to the server network but not internet (6May 13 201214:17:4030201310.153.111.21253663199.47.216.14880Built outbound TCP connection 42508 for Internet_AAPT:199.47.216.148/80 (199.47.216.148/80) to Server_Network:10.153.111.212/53663 (10.153.111.212/53663). The weird thing in logs i see a connection being made but for some reason its referring to the Server_Network interface? below is my current config...
ASA Version 8.2(5)
!
hostname ASA01
domain-name names
name 10.153.11.184 QNAP
name 10.153.11.192 exc2010
name 10.153.11.133 zeacom
[code]....
View 10 Replies
View Related
May 19, 2012
We have a site with two inbound circuits, one for internet and one for our MPLS. Each circuit is being terminated by a 2921 Router and matching ASA 5510 Firewall. For the internal network, the Internet ASA's inside interface (172.16.0.1) is the default gateway for all hosts. OSPF is the routing protocol between all the routers and ASA's and routing is working. In fact, ICMP is working as well. From an inside host (172.16.0.81), we can ping anything on the MPLS network. But when I try to use telnet (for example), the connection fails. If I add a route to 10.10.10.0 to the host, or re-configure the host to point to the MPLS ASA (172.16.0.254) as it's default gateway, connections will establish.
Both ASAs are running 8.4(3), and have the following commands:
same-security-traffic permit intra-interface
interface Ethernet0/0
nameif outside
[Code]....
And from the MPLS nodes, I can see a tcp request is made.
View 6 Replies
View Related
Dec 18, 2012
I have the syntax correct and thought process down right on a solution to allowing guest wireless users access to an internal webserver. (DMZ discussion aside)
We have an ASA5510 with interfaces setup as:
outside - 65.x.x.x address
inside - 172.20.1.2
guest_inet - 10.2.1.1
Internally clients resolve our website to 192.168.40.40 and that part works as it should. Clients outside of our network resolve our website to the correct external address (lets just call it 1.1.1.1). We have a NAT statement static (inside, outside) 1.1.1.1 192.168.40.40 netmask 255.255.255.255 and an ACL to permit tcp any host 1.1.1.1 eq www
Clients on our guest_int use an external DNS server and hence resolve our website to 1.1.1.1. However it seems traffic goes out and back in our outside interface and this connection never occurs.
What I'm wondering is the correct NAT statement / ACL to add that would allow our internal clients on the 10.2.1.x network to access our internal website. Would that be: static (inside,guest_inet) 1.1.1.1 192.168.40.40 netmask 255.255.255.255 ? Since there is already an ACL permitting port 80 traffic to 1.1.1.1 we should be taken care of on the ACL side of things, right?
View 3 Replies
View Related
Dec 5, 2012
Since the power failure two days ago, my -ASA stops forwarding traffic to internal servers, for no apparent reason. Packet trace shows all OK, packet capture buffer stays empty when I try to http into the mail server. The only way to get it working is to change the Outside Ip to the one used for mail, then to change it back. It will work OK for a few hours, then stop, with nothing obvious in the logs.
View 2 Replies
View Related
Sep 4, 2012
Currently, we allow /24 into our DMZ as follow: [code] Now, if we need to extended the /24 to a bigger scope ( range of 15 class C networks ) : can I just re-used the static route or should I use a ACL to allow traffic? This is on a ASA5585
View 1 Replies
View Related
May 28, 2012
I have a ASA 5510 that has multiple site to site VPNs. I need to create an additiona site to site VPN but only allow 1 host to access and traverse the tunnel. The network is on a 192.168.5.x but the host that will need to access this tunnel needs to be on a 172.16.33.x network. I dont want any other traffic allowed to access or traverse the VPN tunnel for this host. How can I set this up?
View 33 Replies
View Related
May 20, 2012
I'm having with my VPN Server on my Cisco 2621xm.
I started by creating a VPN - everything worked great. I assigned the DNS Servers, Domain name, WINS Server so when I connect I'm able to resolve local hostnames on the network with no problem, however, I had no internet access... I then set up a split tunnel access list. Since I've set that up, I'm now able to ping internet based addresses url... but no longer able to resolve internal host names. I can ping the ip addresses, just name resolution no longer works. [code]
View 4 Replies
View Related
Jan 24, 2012
I'm currently looking for a solution in order to restrict the modification of the host internal identity store (add or delete MAC host) per group. The default administrator roles does not include "per group restriction". Under the ACS I defined one group per department? My objective it to allow each department to access their ACS MAC database to add or delete MAC addresses as required.
How to restrict internal identity store per group?Do I need to create new roles? and how?I was not able to get an answer from the ACS ADMIN manual.
View 1 Replies
View Related
May 3, 2012
I have a 5510 using AnyConnect VPN clients. I have a DNS name for my router to accept connections ie cisco.mydomain.com..I can ping the address by hostname from the clients machine ok but when the AnyConnect client opens it has my hostname ie (cisco.mydomain.com) but says "invalid host entry" I have to type in my IP address for it to connect.I have the hostname in my AnyConnectProfiles.xml.
View 1 Replies
View Related
Sep 27, 2011
we have a ASA 5510 firewall and i have created remote vpn user who connects the internal network via vpn any connect after connecting i want him to only access his internal PC via rdp and not access other internal website or shared folders without connecting to the RDP however now he can access the internal website wihtout connecting to RDP?
View 3 Replies
View Related
Mar 20, 2011
ASA 5510I'm trying to add a static NAT for to allow access to an internal webserver on my DMZ. I've added the config, however i'm still unable to get to it from the outside. I'm able to ping and browse the server from the LAN and I'm also able to ping the external interafce from the outside, but just unable to browse.I've turned on logging and the error I'm getting is "Inbound TCP connection denied...flags SYN on interface outside"
View 0 Replies
View Related
Nov 5, 2011
I am trying to setup a VPN tunnel between a Cisco ASA 5510 (Version 8.2(2)) and Sonicwall TZ200. I got tunnel up and going and I am able to ping the Cisco ASA internal IP from the Sonicwall LAN but nothing else works.
When I try to ping a host behind the Cisco ASA from the Sonicwall LAN I get the following message "Asymmetric NAT rules matched for forward and reverse flows;
[code]...
View 14 Replies
View Related
Apr 27, 2013
I have a doubt on how do nat 2 internal ip addresses to 1 public ip for FTP uses.
As I know Cisco ASA cannot use to nat 2 internal ips to 1 public ip as the ASA cannot read the host header. It there anyway to control it by using acl or network object group?
My current configuration for nat 1 internal ip to 1 public ip:
static (firewall-dmz,firewall-outside) tcp 210.19.xx.xx 21 172.16.101.11 21 netmask 255.255.255.255 dns
View 1 Replies
View Related
Sep 18, 2012
I have ASA 5510 and configured client VPN or Annyconnect VPN, when I connect to the ASA remotely using anyconnect I am able to get IP address as configued, from Internal network I can ping and RDP that anyconnect VPN desktop, but the problem is from the remote anyconnect VPN client I am unable to access internal network, when I use ASA packet tracer and check traffic from internal to anyconnect pool of addresses it gives result ok, but when i use packet tracer to check traffic on outside interface from anyconnect address pool to internal subnet it always gives the packet is dropped at WebVPN - SVC, and I can find any where related configuration for that.
View 5 Replies
View Related
Jul 19, 2012
I have a 100mbps internet connection from my ISP but once the connection hits the ASA the download speed gets reduced to 15mbps. My network is setup as follows: ISP Modem ---- Edge Switch ----- ASA --- Internal Cisco Switches
If I plug my computer into an extra port on the Edge Switch I get speeds around 92mbps with normal traffic still going to the ASA. But when I plug into the ASA and internal switches I have speeds of 15mbps.
I have made sure that duplex/speed match on the links. I have done packet captures and within two minutes I do have several dup acks and retransmissions. The retransmissions don't seem to match the dup acks. (The retransmission is not for the dup ack requested so the dup ack keeps being resent)
The only interface error is on the inside interface which includes 700 overruns in a weeks worth of time.I am not using an IPS/IDS. I do have several vpns on it but was not going through a vpn tunnel. I am also using NAT.I am using an ASA 5510 8.2(1)
View 4 Replies
View Related
May 9, 2012
Is it possible to configure remote access (IPSEC client) to force all traffic through the tunnel (no split tunnel) yet still limit the internal hosts that can be accessed?
I have been asked to provide remote access (via ASA5510) with the following requirements:
- the client should have unrestricted internet access via the ASA (the source address will appear to be the outside interface of the ASA)
- the client should have access to only two internal hosts (192.168.10.10 and 192.168.44.10)
Is there a way to limit access to those two internal hosts, while still providing secured internet access? The only way I can see is to use an access list on another device (for example our core switch).
View 1 Replies
View Related
Jun 27, 2011
I have a host that can successfully connect to a PIX 515E (7.x OS) via VPN Client; however, I have no IP routing to the LAN from the remote host.The VPN IP pool works finem,The LAN default gateway is the inside interface on the PIX; the network is flat L2 behind it.The default route on the PIX points out; no other routes are defined,The VPN remote host can be pinged from LAN hosts, but the VPN remote host cannot ping any LAN host, not even the PIX inside interface.
View 2 Replies
View Related
