Cisco Firewall :: ASA 8.2.5 - DMZ To Inside Access?

A Cisco ASA running 8.2.5 with 3 interfaces: Outside (Sec lvl 0)/-nternet IP / DMZ (Sec lvl 2)-192.168.8.0/24 / Inside (Sec level 100)-192.168.1.0/24
 
An ACL on the DMZ which looks like this:
 
access list DMZ_IN permit ip 192.168.8.0 255.255.255.0 any
access list DMZ_IN deny ip any any
access-group DMZ_IN in interface DMZ 
global (outside) 1 interface
nat (DMZ) 1 192.168.8.0 255.255.255.0
 
Nat Control  is not enabled (by default) There is no nat exemption, static identity nat or any nat of any kind set up between the Inside and DMZ.The question is:  Will the DMZ network be able to initiate connections to the Inside network or will only outside (internet) access be permitted?
 
A) No, inside access will not be permitted, only Interenet access will be permitted, because there is no NAT exemption or Static Identity NAT between the lower level security interface (DMZ) and the Higher level security interface (Inside), regardless of the DMZ ACL rule with a destination of ANY.
 
B) Yes, access to the Internet and the Inside can be initiated because NAT control is disabled and there is an ACL that permits DMZ traffic to 'ANY' destination.