Cisco Firewall :: Convert Configuration From ASA 8.2 To 8.6?
Jun 19, 2012Is there an script tool to convert the configuration from a Cisco ASA 8.2 to 8.6 ?
View 1 Replies
ADVERTISEMENT
Cisco Firewall :: Possible To Convert Pix 501 Configuration Running Version 6.3(5) To New ASA5505
Jan 9, 2012I am wondering if it's possible to convert a Pix 501 configuration running version 6.3(5) to a new ASA5505 which we just purchased? We have site to site VPN on this device and i am just trying to save some time. I believe Cisco TAC might have a tool to do this but i am not sure.
View 4 Replies View RelatedCisco Switching/Routing :: 6509 Convert CatOS Configuration To Native IOS Configuration
Jul 17, 2012I am position to migrate from CatOS 6509 switch to native IOS 6509 switch. long time ago, there was some site to convert automatically based on copy and paste onto the tool, but i can not find.
Does anybody know how to convert CatOS configuration to Native IOS configuration ? It is not IOS change, but it is configuration convert.
Cisco VPN :: How To Convert 881 Configuration To 1921
May 31, 2013Here is a copy of my cisco 881 easy vpn config. What I need to modify so this will work on a cisco 1921.
hostname BTLvpn
boot-start-markerboot system flash:c870-advipservicesk9-mz.124-11.T3.binboot-end-marker
no logging bufferedenable secret 5 XXXXXX
no aaa new-modelclock timezone EASTERN -5
crypto pki trustpoint TP-self-signed-733417695enrollment selfsignedsubject-name cn=IOS-Self-Signed-Certificate-733417695revocation-check nonersakeypair TP-self-signed-733417695
crypto pki certificate chain TP-self-signed-733417695certificate self-signed 01 30820244 308201AD A0030201(code)
Cisco Switching/Routing :: Convert Configuration From CatOS On 4006 To IOS On 4510?
Sep 26, 2012I need to convert configuration from CatOS on 4006 to IOS on 4510. I am unable to find the conversion tool.
View 5 Replies View RelatedCisco Switching/Routing :: 6513 - Convert CatOS Running Configuration To IOS?
Oct 14, 2012I have a new 6513 with 2 sup32's with IOS. This chassis will replace a working 6513 with 2 sup2's with CatOS.I would like to convert my CatOS running configs to IOS, and I know there used to be a tool for this.
I have searched around and found many broken links to an old Cisco tool to convert my former configs, is there any way to get this tool today? I have tried over 20 links and not been able to find a working one yet.
Cisco Switching/Routing :: How To Convert Configuration Catos On 6500 To IOS Image
Jul 17, 2012how to convert configuration catos on 6500 to IOS image.
View 3 Replies View RelatedCisco Firewall :: Convert ASA 8.2 To 9.1?
May 5, 2013Is there a conversion tool? It would make my life a lot easier to convert 43 firewalls with failovers.
View 2 Replies View RelatedCisco Firewall :: Convert ASA 8.2 Version To 8.4?
Jun 17, 2012I try to convert a CISCO ASA 8.2 version to 8.4 BUT, I have a small or "little" problem :On Cisco ASA 8.2.x, i have a possibility to create multi-line global with different subnet.Example :
global (outside) 2 217.1.x.65-217.x.x.66 netmask 255.255.255.240
global (outside) 1 interface <-- Ip interface is other subnet : 217.3.x.3
global (outside) 2 217.1.x.67 netmask 255.255.255.240
nat (inside) 1 0.0.0.0 0.0.0.0
nat (dmz2) 2 192.168.4.0 255.255.255.0
What is the method or solution to translate multi-global in 8.4 ? with static translation in 8.4 : i try to use different server in inside's zone, but not in same network on outside. In 8.2 Firmware, it's very easy to use that, but in 8.3-8.4 version, i don't have some idea to manipulate ...
interface Vlan1
description Lien vers reseau Interne Client
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
[code]....
Cisco Firewall :: How To Convert PIX Configs To ASA 8.X
Oct 8, 2012how to convert your PIX configs to an ASA 8.X? [code]
View 5 Replies View RelatedCisco Firewall :: 5510 - Convert Static NAT To PAT
May 27, 2013I have an issue, of two parts. The first part I believe I have figured out, just the second part I am unsure of. I have an ASA 5510, currently, there is a mailserver that is static NAT'ed to one of my ISP routed IPs (not the IP of my main Dynamic PAT/Outside interface). I need to convert this over to PAT for ports 25,80,443, etc (standard ports). I know I need to remove the static NAT statement and add in the PAT statements, but I need traffic from that machine to continue to go out the IP assigned to it by the static NAT.
E.G.
1.1.1.1 <- main public IP on outside interface, everything gets internet through this IP
1.1.1.2 <-> 10.10.10.10 static NAT to mailserver, secured with ACLs
I need to enable the mailserver to continue to appear to the world as living on 1.1.1.2, due to MX records and rDNS settings, etc...
The terminology for this setup escapes me at the moment.
Cisco Firewall :: Possible To Convert Any Two Ports Of ASA 5520 As L2
Apr 13, 2011is it possible to convert the any two ports of asa5520 as L2 ports . If so kindly let me know how that should be done. We are planning to connect our hsrp switches to these switch ports instead of using a separate switch thats why.
View 1 Replies View RelatedCisco Firewall :: ASA5505 How To Convert 3 Group Mac Address To 6
Apr 16, 2013Recently i bought asa 5505 to practice for my exams and i failed to connect to internet since my internet provider binds IP and mac for every users and supports only 6 group mac address (xx-xx-xx-xx-xx-xx) format. because asa 5505 has 3 groups (xxx-xxx-xxx) mac address they are unable to provide me the connection.So my question is how can i assign 6 group mac address to asa5505.
View 2 Replies View RelatedCisco Firewall :: 1811 / Zone-Based Policy Firewall Configuration
May 16, 2011I have two 1811's connected in a lab using a ipsec vpn tunnel (using a switch to simulate an internet connection between them).I am trying to configure one of the routers as a ZBPF just to allow a remote windows login (DC on the firewalled side, workstations on the other side).I'm trying to verify that the zbpf is working, but it doesn't seem to stop anything. I had match icmp added to the class-map, but took it out to test if icmp would fail. It didn't. Basically, I don't think the firewall is working at all. Any thoughts on how I can configure this so that the policies will work between zone-pairs?
Here's an quick drawing:
Here are the configurations:
Local router:
hostname sdc-1811-LocalLab
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
resource policy
[code]....
Cisco Firewall :: ASA5505 Lose Configuration If Upgrade Firewall
May 17, 2011i have asa 5505 with the asdm v5.2 (4), and the asa v7.2(4). This platform has a base license. if i upgrade adsm and asa on v6.2(1) and v8.2(2) if I lose my license and that you need to activate them? i configured site to site vpn (this firewall and the another) that i lose my configuration if i upgrade my firewall.
View 2 Replies View RelatedCisco Firewall :: ASA 8.4 What Commands Can Use To Verify Related Configuration On Firewall
Apr 7, 2013We have an ASA with 8.4(5) version. we had detected that few ip's were getting shunned ,to overcome the problem no shun was used and the traffic normalised.But, the same problem re-occured a few days after that with logs showing traffic being shunned.
is there any fixed way to get rid of this. what commands can i use to verify related configuration on the firewall.
Cisco Firewall :: Configuration Required For Transparent Firewall ASA 8.2?
Mar 31, 2013I have one firewall need to be configured in transparent mode. I have inside and outside router. What is the configuration of transparent firewall ASA8.2. I didn't find the configuration on Cisco site.
View 17 Replies View RelatedCisco Firewall :: Transparent Firewall Configuration In PIX 515E
Nov 25, 2012I am trying to set the PIX firewall to transparent mode.After I set it to transparent firewall, I allowed all icmp, tcp, udp traffics.Currently, any devices in the inside network can get the ip automatically from DHCP server in the outside network but cannot ping to any servers in the outside network either access the internet.Do I need additional confiration on the firewall?
Here's the configuration:
PIX Version 7.0(1)
firewall transparent
names
!
interface Ethernet0
[Code]....
Cisco Firewall :: ASA 5505 Transparent Firewall Configuration?
Sep 11, 2007I want to configure an ASA 5505 in transparent mode (7.x). Somehow, I got it to work.. but i need some kind of step by step description. I just want to connect it with outside on a route .. inside in my LAN. Its working now with one ASA. But in the Web Interface the Interfaces inside and outside are down.. but its working.
View 5 Replies View RelatedCisco Firewall :: 861 Firewall Configuration Not Available With CCP
May 5, 2012Setup new Cisco 861 and working well for a new BTNet line for the customer. Changed the firewall using CCP from Zone to Classic Firewall. Worked great all day and configured what I needed to do.Now, with CCP (version 2.6) have the following message.Cisco CP has detected that the router is configured with either legacy and Zone Policy Firewall (ZPF) or Legacy firewall. If you want to use Cisco CP to configure an zone-based firewall, you must first delete the Legacy configuration.
View 4 Replies View RelatedHow To Convert Wifi To Lan
Jul 26, 2012I have a guest house in the back. I access the net there through my Dell laptop using WiFi. I have a television there that needs to have its operating system upgraded through the internet. All it has is a LAN connector. How do I get my Laptop to convert the WiFi to LAN so all I need to do is connect a LAN cable between my laptop and the TV? Or do I need to buy something cheap to convert WiFi to LAN?
View 3 Replies View RelatedConvert Router To Wap
Aug 3, 2012Trying to convert a spare router (Linksys E3200) into a wireless access point to extend my wireless coverage. I thought knew how to do this but having a problem.The problem I am having is that after I finish step 2 the router reboots with the browser trying to access it at the new ip address. But the browser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected by an ethernet cable. I also tried it wireless with the same result.
View 3 Replies View RelatedCisco Firewall :: 881 - ACL Configuration
Mar 28, 2011I would like to replace my firewall by using ACL on my Cisco 881 for testing. Could it be possible?
Configuration:
access-list n° permit ip host distant_site_public_IP host my_public_IP
access-list n° permit tcp any host my_public_IP eq port
This configuration works fine for SSH in exemple.
I can't allow "web pages" flow!!!
When i put: access-list n° permit tcp any host my_public_IP eq www
It does'nt work.
With Wireshark, I've seen that random ports are used to set the "http connexion". How could I resolve it keeping the best security configuration? I place my ACL on WAN port, Maybe I have to place it on LAN or create others ACL list to complete the configuration?
Cisco Firewall :: NAT Configuration On ASA 9.1(1)
Jan 21, 2013I recently installed an ASA firewall for one of our customer. I am trying to map the web server’s private address to the public address:
The private address is 192.168.207.15
The public address is 71.x.x.51
Here is the NAT configuration. For some reason this configuration is not working. I am not sure what is wrong with this configuration.
object network inside-out
nat (any,outside) static interface
object network new-www
nat (inside,outside) static 71.x.x.51
access-group inside_access_in in interface inside
access-group global_access global
NOTE: Inside network users can access Internet just fine. But I just cannot get natting to work.
Cisco Firewall :: 501 ASA / PIX Configuration
Sep 26, 2012I'm having trouble configuring an ASA into a network solution. We have a 501 with the outside interface on 10.24.10.1, the inside interface as 172.18.10.1, and a DMZ on 192.168.1.1. in the DMZ there is a HTTP/FTP/TFTP server connected to 192.168.1.2 on a virtual machine. When on a machine configured to 172.18.10.10 I can ping to the outside interface but not the DMZ. When I am in the DMZ the PIX does block traffic to the inside, but I can't reach the outside interface. When on the outside I am blocked from the inside, but also blocked from the DMZ.
Group10(config)# sh run
: Saved
:
PIX Version 8.0(4)
[Code]......
Cisco VPN :: Convert Static Policy NAT From 8.2 To 8.6?
May 26, 2013I have a L2L tunnel I need to convert from 8.2 to 8.6 and need to understand the static policy Nat conversion. I have single hosts that require a 1-1 nat to addresses given to be my the vendor that reside on my firewall. Other works i have /24s that I static nat my inside host to so that the vendor can access the host for support.Example. server 10.11.103.44(real server on my inside network)
5.5.98.0/24-Defined for local traffic via L2Ltunnel
object-group network Carebridge_Local
description Mckesson Local network list
network-object 5.5.98.0 255.255.255.0
[code]......
How would I accomplish the same in Ver. 8.6
Cisco Wireless :: 1262 AP Convert To LAP?
Mar 13, 2012Is it possible to convert autonomous access point Cisco 1262 to LAP?
View 9 Replies View RelatedCisco WAN :: Convert QOS Policy On 6500 CAT To IOS
Feb 21, 2012I am trying to convert QOS policy on 6500 CAT to IOS as below,
1-getting error when try to apply on interface.
2-How can I apply both into one plicy map because IOS convertor puts into two policy maps.
CAT
set qos policer aggregate Limit_WSUS rate 4000 policed-dscp erate 4000 drop burst 1000 eburst 1000set qos policer aggregate Limit_SCCM rate 4000 policed-dscp erate 4000 drop burst 1000 eburst 1000clear qos acl all
#WSUSset qos acl ip WSUS dscp 0 aggregate Limit_WSUS ip host 172.16.9.3 any
set qos acl ip WSUS dscp 0 aggregate Limit_SCCM ip host 172.16.10.5 any
[code]....
Cisco WAN :: Convert LAP AIR-AP1121G-E-K9 To Autonomous AP
Feb 27, 2011I want to convert LAP AIR-AP1121G-E-K9 to autonomous AP.
View 1 Replies View RelatedConvert WRT 54 2 To Wireless Bridge?
Apr 27, 2011How do I convert an old WRT 54G 2 to a wireless bridge.
View 1 Replies View RelatedBrowser / How To Convert Wpa Password To Wep Key
Feb 26, 2012how can i convert wpa psk password to wep key
View 1 Replies View RelatedConvert Wifi Signal To Lan?
Dec 13, 2012Convert Wi-Fi signal to LAN?
View 2 Replies View RelatedCisco Firewall :: ASA 5510 DMZ Configuration?
Dec 26, 2011I have a Cisco ASA 5510 connected to 2 private lans (1 for my HQ pc's{inside} and 1 for the worldwide mpls{outside}) It is also connected to the public internet at interface "public" and my dmz at "dmz" interface. I suspect I have a routing issue because packet-trace yields allow, the nat looks ok and the objects look ok at least to me but I'm the one with the non working config so...Basically this is the desired flow:
1. I need all traffic from the inside to be able to flow to the outside unimpeded as they are both trusted networks. (this is ok right now as I allow everything via access-list 101.)
2. I need any host on the public internet to be able to reach a server on the dmz via the pat which I set up from the "public" interface to the "DMZ" interface. The desired flow would be that the person on the internet types in [URL] and this is directed to the public interface ip which forwards to the webserver object on the dmz. (I cannot get this working any which way)
3. I need the dmz to be able to communicate with another server on the mpls via the "outside" interface when it recieves the request from the public it then checks with this other server on the outside via nat(translating the dmz range into the ip of the outside interface on the firewall)I have a default route that points to the mpls or outside interface for 0.0.0.0 0.0.0.0 via 10.x.x.1 - (and although I'm not sure I suspect this could be conflicting with traffic that needs to be sent to the "public" interface .... meaning that the firewall should dump packets bound for 0.0.0.0 0.0.0.0 to the public interface - 184.x.x.194 but I'm very reluctant to change the default route as this is in production and I'm not sure how it will affect traffic).However, I do suspect that if I changed the route from default to static as such:
route 10.0.0.0 255.0.0.0 10.x.x.1 (this would get all lan and mpls traffic to the mpls gateway) route 0.0.0.0 0.0.0.0 184.x.x.193 (this would send everything else from public to the public internet gateway)I think this is accurate but then I would bypassing my corporate internet proxy which is behind the mpls gateway at 10.x.x.1? Is there a way to get http traffic originating from the lan (10.x.x.x) to use the mpls gateway and http traffic for the dmz to use the public internet gateway at 184.x.x.193. I don't want to start causing a flow problem for the internet nor do I want to bypass my corp internet proxy.Either way I cannot get this to work, eventhough the logic checks out, I cannot get even a ping response when I allow icmp any any for testing. Note: I can ping resources on each network from the firewall, not only it's own ports in the associated network but other resources on those networks as well.
Here is the running-config:
ciscoasa# sho run
: Saved
:
ASA Version 8.4(1)
!
hostname ciscoasa
domain-name marcjacobs.lvmh
[code].....