I have a guest house in the back. I access the net there through my Dell laptop using WiFi. I have a television there that needs to have its operating system upgraded through the internet. All it has is a LAN connector. How do I get my Laptop to convert the WiFi to LAN so all I need to do is connect a LAN cable between my laptop and the TV? Or do I need to buy something cheap to convert WiFi to LAN?
I have a cable internet.There is no other hardware that connects to the Cable.There is no modem or router.Just the RJ45 cable that I plug in to my laptop and go online.Now,I want to convert this to wifi.what router/modem will I require and possibly with the model number and something thats low in price.I will use only one laptop and no intention of multiple user.I dont intend to use printers either.I am using windows 7.The network adapters that are installed in my laptop are: Intel Centrino wireless N 1030.Microsoft virtual wifi miniport adapter and Microsoft virtual wifi miniport adapter #2,RealtekPCIe FE Family Controller?
I have a reliance netconnect + broadband connection (usb device) which I use to connect my laptop. Is there any device/ software which will convert this to WIFI so that I can use the same connection for my other WIFI enabled devices?
I have an equipment which has LAN port for wired connectivity to the computer. I can connect 10 such equipment thru LAN to the computer & display the data of all the equipments on computer screen. This LAN network I wanna convert to Wi-fi/wireless.
Trying to convert a spare router (Linksys E3200) into a wireless access point to extend my wireless coverage. I thought knew how to do this but having a problem.The problem I am having is that after I finish step 2 the router reboots with the browser trying to access it at the new ip address. But the browser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected by an ethernet cable. I also tried it wireless with the same result.
is it possible to convert a 3G donugle into a hotspot?? i tried converting my LAN into a hotspot and it works. wondering if it is possible to do the same with my 3G doungle.
My Sony video camera saves in .m2ts. I need to convert the file to .avi for editing. Is there freeware available and what should the settings be for the best quality. Can PMB � Picture Motion Browser export to AVI?
My daughter is going to university. An Ethernet connection is provided but she wants to work wirelessly. Is there a gadget to attach to the Ethernet port that will create a wireless signal for her to connect her iPad and PC laptop?
It is possible to convert 802.11a to 802.11g wireless network device. I wireless outdoor cpe which is work on 802.11a...i want to convert it to G network
I have a wired IP phone connected to my company network, in my home office. How can I convert this to wireless so I may use other rooms in the house to work in?
I try to convert a CISCO ASA 8.2 version to 8.4 BUT, I have a small or "little" problem :On Cisco ASA 8.2.x, i have a possibility to create multi-line global with different subnet.Example :
global (outside) 2 217.1.x.65-217.x.x.66 netmask 255.255.255.240 global (outside) 1 interface <-- Ip interface is other subnet : 217.3.x.3 global (outside) 2 217.1.x.67 netmask 255.255.255.240 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz2) 2 192.168.4.0 255.255.255.0
What is the method or solution to translate multi-global in 8.4 ? with static translation in 8.4 : i try to use different server in inside's zone, but not in same network on outside. In 8.2 Firmware, it's very easy to use that, but in 8.3-8.4 version, i don't have some idea to manipulate ...
interface Vlan1 description Lien vers reseau Interne Client nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0
I have a L2L tunnel I need to convert from 8.2 to 8.6 and need to understand the static policy Nat conversion. I have single hosts that require a 1-1 nat to addresses given to be my the vendor that reside on my firewall. Other works i have /24s that I static nat my inside host to so that the vendor can access the host for support.Example. server 10.11.103.44(real server on my inside network)
5.5.98.0/24-Defined for local traffic via L2Ltunnel object-group network Carebridge_Local description Mckesson Local network list network-object 5.5.98.0 255.255.255.0
I'm trying to upgrade my existing Netgear wired router to a Netgear N600 wireless router. I was really hoping just to replug in everything and go. But because the wired router is setup for 192.168.1.1 when I plug in the wireless router it thinks nothing is plugged in because it too wants to use that IP address. How do I disable the wired settings
My super awesome desktop with the regular gigabit, on board lan card (on Win7).A laptop, with wireless connectivity (again on Win7).A modem, UTStarcom WA3002G4 with an internet connection from BSNL.The modem is a wireless modem.Now for my question.I want to be able to connect the laptop and the desktop in a single LAN connection, so that i)I may play NFS Most Wanted on both the laptop and desktop through the LAN play.ii) I may share files and folders, fast and without any hassles.*though mostly only the firstSo, this being my completely descriptive question.
I have an ADSL router like the one showed below & internet from the provider via a RJ45 cable.
I need to share the incoming internet from the RJ45 cable to the remaining three RJ45s & over the wireless. How to configure the router to get this working?
Also the internet provider needs me to authenticate via their default webpage before I can access the internet & I can say it doesn't have any MAC binding.