Cisco Firewall :: Get DMZ Hosts To Access Internet Via Outside Interface Of ASA5505
Jun 19, 2011
How can I get DMZ hosts to be able to access the Internet via the Outside interface of my ASA5505.I am using the DMZ to allow temp guest acces to the Internet.
Here is my configuration and it can be changed as needed.
User Access Verification
Password:Type '?' for a list of available commands.ciscoasa> enaPassword: *******ciscoasa# sho run: Saved:ASA Version 8.0(4)!
interface Vlan1nameif insidesecurity-level 100ip address 192.168.100.39 255.255.255.0!interface Vlan8no forward interface Vlan1nameif dmzsecurity-level 50ip address 172.31.10.1 255.255.255.0!interface Vlan11nameif outsidesecurity-level 0ip address 24.172.82.xxx 255.255.255.252!interface Ethernet0/0!interface Ethernet0/1switchport access vlan 11!interface Ethernet0/2!interface Ethernet0/3switchport access vlan 8!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!boot system disk0:/asa804-k8.binftp mode passivedns server-group DefaultDNSdomain-name asaobject-group protocol DM_INLINE_PROTOCOL_1protocol-object udpprotocol-object
[code]...
View 10 Replies
ADVERTISEMENT
Apr 25, 2011
I am using ASA 5505 firewall with base-license. I connected my firewall to one cisco 3750 switch where i created 5 vlans. I done NATing for all vlans and they able to get internet and working fine. They able to browse all internet sites like gmail and yahoo mail.
All internal users are configured to use Outlook for their webmail. Here the problem is with outlook they are unable to send and receive the mails.
If they directly connected their system using public ip( Directly from ISP) they able to send and receive mails from outlook.
View 2 Replies
View Related
Feb 18, 2012
The ASA5505 I am working with has this from the show version:
Licensed features for this platform:Maximum Physical Interfaces : 8VLANs : 3, DMZ Restricted Inside Hosts : 10Failover : Disabled VPN -DES : EnabledVPN-3DES-AES : Enabled VPN Peers : 10WebVPN Peers : 2Dual ISPs : Disabled VLAN Trunk Ports : 0
This platform has a Base license.
Does the Insides Hosts :10 line mean that only 10 devices can be connected to the firewall at one time? I would like to connect an AP to one of the PoE ports and have possibly more than 10 connected. Is this possible with this ASA5505?
View 9 Replies
View Related
Aug 17, 2011
I want to upgrade "inside hosts" from 10 to unlimited on a ASA5505-BUN-K9, Do I have to buy Security Plus license ( L-ASA5505-SEC-PL =) ) before activating ASA5505-SW-10-UL ?
View 3 Replies
View Related
Sep 13, 2012
I am trying to access and ping the inside interface of a ASA5505 from a remote network. From the remote network, I am able to access anything on the local network, but the ASA5505 inside interface.The 2 networks linked by a fiber link which have a transport network on another interface. From the remote network, I am able to ping the transport network interface IP, but I would like to be able to ping the inside interface IP. When I do a packet tracer, I get a deny from an implicit rule.How can I achieve that?
Here are the subnets involved and the ASA5505 config.
Remote network : 10.10.2.0/24
Local network : 10.10.1.0/24
Transport network : 10.10.99.0/24
[code]....
View 1 Replies
View Related
Feb 24, 2011
I have a normal setup of ASA5505 (without security license) connected behind an internet router. From the ASA5505 console I can ping the Internet. However, users behind the Firewall on the internal LAN, cannot ping the Internet even though NATing is configured. The users can ping the Inside interface of the Firewall so there is no internal reachability problem. In addition, I noticed that the NAT inside access list is not having any hit counts at all when users are trying to reach the internet.
When i replace the ASA5505 with a router with NAT overload configuration on it, the setup works normally and users are able to browse the internet.
The ASA5505 configuration is shown below.
hostname Firewall
interface Ethernet0/0
description Connected To Internet Router
switchport access vlan 10
[Code].....
View 2 Replies
View Related
Jan 19, 2012
There is web server at the internet. The firewall ASA5505 is located at the inside edge of the edge router and the internet is at the outside edge router of the edge router. The router has already been configured can route the outside network of firewall to internet. [code]
1. I have a host at the DMZ zone of firewall and if it wants to access this web server by http, the following command lines to be added to ASA5505 good enough and anything wrong with them? [code]
2.I have a doubt here that do I need to add any command line related to the Static Mapped address of 192.168.20.10/24 like below?
access-list Outside_DMZ extend permit tcp any 192.168.20.10 255.255.255.0 eq 80.whereby the 192.168.20.10 is the static mapped address of the Host at the DMZ to Outside Nertwork. Or, any other command related with the Static Mapped address have to be added?
View 5 Replies
View Related
Dec 10, 2012
I've been struggling with gaining access to the inter through our Comcast business gateway. We have had Comcast configure the device fro true static IP subnetting. Turned of local DHCP on the device etc. Here is my config.
ASA Version 9.1(1)
!
hostname TOCN-EX-01A-C5505-GW
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
[code]....
View 9 Replies
View Related
Jun 1, 2013
I have a ASA5505 and I'm having trouble to achieve the following setup, block any kind of connection from outside except for IIS on port 80 and 443 but allow from the server to access any outside address, by domain or ip. Right now apps writen in C# on the server are throughing socket errors and Teamviewer remote control is not working, I would like it to replace remote desktop.
View 3 Replies
View Related
Oct 2, 2012
I am trying to provide internet access to public and private SSID's on Cisco AP541n using VLAN's connected directly to ASA5505. VLAN1 is inside interface (private) and VLAN12 is wlan interface (public SSID). The AP541n is plugged into switch port 0/7 on an ASA 5505.Port 0/7 is configured as trunk mode. I have internet access when connected to private SSID but no internet access when connected to public SSID. why I can't access internet on public SSID?
logging class ip history emergencies
mtu inside 1500
mtu outside 1500
[Code].....
View 5 Replies
View Related
Jul 14, 2011
I've recently upgraded my old firewall from a PIX to an ASA5505 and have been trying to match up the configuration settings to no avail. I have is that I can't ping the new firewall on it's inside interface, despite having "icmp permit any inside" in the running config. Secondly, the server I have on there ("Sar") can't connect out to the internet.I've included the ASA's running config incase anybody can see if something stands out. I have a feeling it's either not letting anything onto the inside interface, or there is no nat going on. Lastly (and possibly relevant), the firewall is actually going at the end of a vlan, which is different to the firewall's inside vlan number. I don't know if this is actually the problem because the server can't connect out even if connected directly into the firewall.
View 32 Replies
View Related
Feb 9, 2013
I have configured the ASA in a very similar manner to how the PIX was set up but I'm having trouble with some hosts on the inside accessing the Internet. Any inside hosts which use DHCP work fine. Any inside hosts with a static IP (and configured on the ASA with a "static" rule) cannot access the Internet. For example, in the config below the server daviker-dialler cannot access the Internet. I've spent a few days working on this now and have started from scratch several times but I'm not getting anywhere. Apologies for all the X's everywhere, didn't like to post anything sensitive on the Internet.
View 2 Replies
View Related
May 16, 2011
I am using a three interface ASA config (Internet, DMZ, Inside). The DMZ and Inside networks are both RFC 1918 space however it is against our corporate policy to allow our DMZ IP space to be internally routable, therefore we must target routable IP's which NAT to the DMZ hosts . In my DMZ network there are two devices - a Web Server and a 802.11 Access Point.
The Web Server is hosting our corporate web site. When the clients accessing the internet via the Access Point try to access our corporate web site they are not able to. A DNS lookup of the A record 'www' returns the public IP address, which when targeted translates to the real RFC 1918 IP of the web server.
Is there a way to use destination NAT or another clever config so when a host targets a public IP which is being translated on a different interface right back into the same interface it originated from it would allow the traffic?
View 1 Replies
View Related
Mar 12, 2012
I have an ASA-5505. [code] I have an Exchange server on the 10.10.10.0 network. I need to be able to allow Active-Sync and OWA from the Guest WiFi through to the Exchange server on the 10.10.10.0 network. The Guest Wi-Fi uses external DNS so traffic is going out to the Internet and getting an IP address which is of course assigned to the Outside interface abd trying to come back in on that interface.How do I make this do what I need? How do I setup the rules to allow this traffic?
View 2 Replies
View Related
May 6, 2012
I have ASA5505 configured with internal network as 192.168.15.0 and default gateway 192.168.15.1 From the inside network, i'm able to access internet and able to ping all website (enabled ping). and all internel network devices can ping each other. Except i cannot ping my gateway (ASA5505) 192.168.15.1. I'm continously seeing this message on the log, when i tried to ping.. How to fix this?
Denied ICMP type=8, code=0 from 192.168.15.xxx on interface inside
replace xxx with my network devices that try to ping the gateway..I dont want outsiders ping my gateway, i need ping for inside internal network only.
View 5 Replies
View Related
Sep 17, 2011
I have two attachments that show my basic network layout. I can get from the VPN Cisco Client to Workstation 2 just fine with my current NAT rules in place. I can also get from Workstation 2 to Workstation 3 just fine. But I'm having issues when I try to get from the VPN client to Workstation 3... What would I need to do enable to get to Workstation 3 from the VPN client? IT seems very simple to me (just PAT that traffic as I do the traffic from Workstation 2 to Workstation 3) but that does not work.
View 10 Replies
View Related
Aug 17, 2011
I've tried to get my head around this but beeing used to Juniper and Watchguard devices I just can't get my home webserver published to the outside interface.I have a ASA5505 with ASA version 8.4 and ASDM version 6.4 and the basic license.
Outside interface is X.X.X.32/255.255.255.248 so I have 5 static IP:s on my external interface, .34 is in use for the outside interface.
Inside 10.10.10.0/25
DMZ 10.0.0.0/24
I have a webserver in DMZ located at 10.0.0.253 and would like to publish it to the external IP X.X.X.35.I've tried to make the static NAT but every time I do either nothing goes in or out of the DMZ zone or you can't access the webserver from the outside interface.Right now I deleted all trials since none of them work so only the basic config is applied. Everything get's NAT:ed to the external interface .34 IP.
View 4 Replies
View Related
Oct 28, 2011
I have been working on a configuration for single IP address (on outside ) of ASA5505.I am trying to utilize the outside address 192.168.0.249 to PAT/NAPT to 10 inside machines [code]
What I am not sure of (actually that could be considered all encompassing) is the mapped services/real services.Any constructive comments assistance?
View 5 Replies
View Related
Mar 9, 2011
administrator wants to manage ASA 5500 using inside interface.{telnet or ssh].Allowed telnet and ssh in ASA 5500 but unable to get access from administrator PC..Is there a way to do it without enabling NAT on the ASA? Will a specific rule on ASA allow adminstrator to access ASA 5500 inside interface via ssh or telnet?
View 2 Replies
View Related
Dec 4, 2011
I have an ASA 5510 which i've configured for internet access.I can connect to the internet from the ASA box,I can ping public networks from the console of the ASA box,but cannot access public hosts from internal hosts connecting via the ASA box.Find my config below to know what i ahave omitted or committed.
[code]...
View 5 Replies
View Related
Jul 26, 2011
I am having a problem configuring my ASA 5505 for NAT.
View 3 Replies
View Related
Jan 9, 2013
Internet ISP -> Juniper SRX 210 Ge-0/0/0
Juniper fe0/0/2 -> Cisco ASA 5505
Cisco ASA 5505 - >Inernal LAN switch.
1. Internet is connected to Juniper Ge0/0/0 via /30 IP.
2. Juniper fe0/0/2 port is configured as inet port and configured the Internal public LAN pool provided by the ISP. And this port is directly connected to Cisco ASA 5505 E0/0. Its a /28 pool IP address. This interface is configured as outside and security level set to 0.
From Juniper SRX, am able to ping public Internet IPs (8.8.8.8).
Issue:
1. From ASA am unable to ping public ip configured on Juniper G0/0/0 port.(/30)
2. From ASA no other Public internet IP is pinging.
Troubleshooting Done so far.
1, Configured icmp inspection on ASA.
2. Used the packet tracer in ASA, it shows the packet is flowing outside without a drop.
3. Allowed all services in untrust zone in bound traffic in Juniper SRX.
4. Viewed the logs when I was trying the ping 8.8.8.8 in ASA. It says "Tear down ICMP connection for faddrr **** gaddr **
View 2 Replies
View Related
Apr 5, 2012
Can i access Cisco ASA 5505 Remotely Via Modem? l mean out of band management of Cisco ASA 5505? is that possible?
View 3 Replies
View Related
Mar 21, 2013
i have test to access the firewall of ASA5510 with ASA845-K8/asa902-k8bin + asdm-712.bin +JAVA6 / 7, is completely no problem
When i try to install a new ASA5505 existing IOS is asdm825-k8 and also asdm-712 with JAVA7 is not allow to access the firewall with ASDM
After i type in username password, it stuck on the page loading , sometimes it will come up with cannnot to the device something like that.
telnet and SSH is no problem, i still can download the IOS with TFTP.
I think may be the java problem, because i just to connect with wrong ip and password, it also stuck in this page.
View 8 Replies
View Related
Oct 27, 2011
I manage to configure the firewall 5505 so that it can ping between outside and DMZ and also between DMZ and inside.
Outside and Inside are not accessible to each other because Outside No Forward to Inside.
My purpose now wants to access the shared folder by Windows Explorer ( under Network ) between for example DMZ and inside. I tried to do it but cannnot even see the Host of the other party network. For example, if I open Windows explorer at DMZ, I can't see the Host at Inside Network. Same as I open Windows Exploere at Inside, I can't see also the Host at DMZ network.
How am I configure so that I can access the hsot as well as shared folder of two sites which already can ping each other?
View 12 Replies
View Related
May 16, 2011
I just started at a new company and they want to use iphones in place of blackberry's, what a surprise. We have a exchange server and blackberry enterprise server. My question is how do I configure the cisco ASA to allow for iphone vpn connection and start replacing our blackberry's.
View 1 Replies
View Related
Jun 2, 2013
I have setup a Remote access VPN on my ASA5505 firewall through the ASDM wizard.I can successfully connect with the Cisco VPN client. My firewall also shows me the VPN session and shows incoming Rx packets. However, Tx packets remain 0, so no traffic is going out. My ASA5505 is configured as router on a stick with 25 different VLAN's. I want to restrict traffic to one specific VLAN using a crypto map.When I issue a ping -t command on my connected Windows box, the firewall log shows me the following message:
"IKE Initiator unable to find policy: Intf outside, Src: 10.7.11.18, Dst: 172.16.1.1."
"This message indicates that the IPSec fast path processed a packet that triggered IKE, but IKE's policy lookup failed. This error could be timing related. The ACLs that triggered IKE might have been deleted before IKE processed the initiation request. This problem will most likely correct itself." [code] I have really no idea what's going on. I have setup a Remote access VPN countless times but this time it shows me the error as described above.
View 5 Replies
View Related
Jan 20, 2013
I'm trying to make a very plain and simple network with the ASA 5505, I've strated from scratch over a dozen times triyng to find where I'm going wrong. My main goal is to simply create an IPSec VPN connection to my ASA 5505 and simply ping and connect to devices with the "inside network", so far I can easily create and establish a IPSec VPN Connection, but up to this point, I cannot successfully ping or access a single device on the ASA 5505 inside network.I've taken, create the IPSec profile with the ASDM wizard, add exemption for the VPN IP Pool, add access-list from this Cisco link, url...All this and I can't make a single connection to the inside network. [code]
View 7 Replies
View Related
Oct 25, 2011
Using an ASA5505, have 1 static outside address, want to access an inside SBS-Server on SMTP, RDP (3389), HTTPS and port 987
Have configured network object nat rules using the asdm, SMTP works (I can telnet to the server on port 25 from outside), however for some reason I can not telnet inside and out on port 25, so outgoing mail does not work. RDP does not seem to work from outside, 987 I havent tested from outside. When I try to create a network object nat rule for https I get this message from the ASA:
[OK] object network SBS-HTTPS
object network SBS-HTTPS
[ERROR] nat (inside,outside) static interface service tcp https https
NAT unable to reserve ports.
View 5 Replies
View Related
Dec 18, 2011
we have a cisco ASA5505 with base license and 3 interface configured. Internal 192.168.1.1/24 DMZ 172.16.0.1/24 Outside 20.20.20.20/24 The DMZ is configured to allow the traffic pass to the outside interface only (base license allow only traffic to one interface) in order to let clients on this network to browse internet. On the outside interface there's a nat configuration that let the port 443 to be natted to an in internal server. Is it possible to let the clients in DMZ to access to the internal server on port 443 from the outside interface?
View 3 Replies
View Related
May 11, 2010
Recently installed an ASA5505 for a client. They have Verizon DSL (7mb down, 384up package). So my config is Verizon (Westell) DSL modem connected to e0/0 (VLAN2) of ASA. From there I have e0/1 (VLAN1) connected to a 3COM 2250 Plus 50 port switch.
Since installing the ASA client has been complaining of a major slow down in Internet speed. Contacted ISP and they had me remove the firewall from the equation and hook modem directly to laptop. With this setup I get between 6-7mb download speeds. When I put the ASA back into the mix though, the speed drops significantly. The speed will varry but 90% of the time they do not even get 1mb download speeds.
The configuration is pretty straight forward, not doing a whole lot with the box other then using it for VPN (IPSEC).
View 20 Replies
View Related
Mar 16, 2013
I am trying to troubleshoot a problem where in one of my remote site is not able to access some networks at HQ over Site to SIte VPN ( asa 5505 at Remote and 5520 at HQ). I ran packet tracer and HQ ASA looks clean as everything came out as ALLOW. Remote site ASA packet tracer give me DROP out at Phase 9 (VPN). I am not very sure what to look in ASA for resolution now. Is it an access list that is blocking the traffice or VPN setup.
View 5 Replies
View Related
Jul 11, 2012
I have a network with 3 sites that are on different subnets. Each site has an ASA Right now, I am only able to connect to the ASA that is connected to the subnet I am connected to.I want to be able to connect to the ASA that are on the remote subnets on the address of the inside interface.The sites are connected all together by site-to-site VPN.Is there any way I can achieve that without opening the outside interface directly on the Internet?
View 2 Replies
View Related
