We are relocating lms on same server from c to e: drive, with new installation on e:drive Successfully uninstall LMS from c: drive with clean_system. Exe. I have done fresh installation of LMS 3.2.1, installation has been 100% successful, after installation Iam trying to restore database which was backed from exactly same version of LMS. Database restore has been 100% successful for 7 hours, till the point that iam start seeing below message in restore backup.log and also same message in cmd as well.
1. restorebackup seems to loop at the point of restoring RME database.
---
The untar for the tar file E:CAPCIS~1 empBackupData
mengfilebackup.tar is still locking the directory [E:CAPCIS~1 empBackupData
meng]. May be the file content is huge, and its taking more time. It is recommended to type (y) and continue restore.
Do you want to continue the restore (y) or quit the restore (n) [y/n][Sat Nov 12 02:05:24 2011]
[Sat Nov 12 02:05:24 2011]
I have a newly installed LMS 4.1 that had the Syslog feature working for a while.
Recently, the Syslog is no longer displaying any records (neither new or old messages).
Below are the steps I have tried to troubleshoot the problem: - Installed wireshark : Syslog messages are being received by the LMS server on time - In the Syslog.log file, I can see that all the Syslog messages are being logged properly - I tried to disable all the "Syslog Message Filters" but nothing changed
In the SyslogCollector.log, I can find the below logs: NMSROOT is C:/PROGRA~2/CSCOpx propFileC:/PROGRA~2/CSCOpxMDC omcatwebapps meWEB-INFclassesC:PROGRA~2CSCOpxMDC omcatwebapps [Code]....
My netbook keeps getting DNS Lookup Failure messages. This happens about every 20 minutes, give or take, though sometimes it can go longer before the failure. I can "solve" the problem by quickly repairing the network connection, but that's tedious. It happens only on my laptop and not on my housemate's desktop (wired connection) though he did say that it happens to him on his laptop as well. In looking around I thought the problem might be because i'm using Chrome, but it happens on Firefox and Opera as well.
This all started 3 weeks ago, the internet started randomly dropping out between every 10 -20 minutes for 5 seconds, then it would reconnect. This is happening on multiple computers in the same house.
I have an RV110, and I'm interested in extending the WiFi range using its WDS feature.The RV110W data sheet simply states.. "allows wireless signals to be repeated by up to 3 compatible devices",Where can I find these "compatible devices", and has anyone had any success using WDS with any APs from the SMB product line?
Our detail is "RV042 V03" and using 2 bridge mode modem.
After i upgraded a new firmware v4.1.1.01-sp (Dec 6 2011 20:03:18) , i got many problems in NSD. Both of Modem always hang 5-6 times a day. And today, i just saw the log line :
Apr 26 03:31:16 2012 Kernel last message repeated 2 times. ( It takes around 5-6 times per hour)..
my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
I need to generate an ODBC connection to the upm Datasource on LMS 4.1 running on Win2K8. I have successfully built connections to cmf, ipm and rmeng, however UPM keeps failing saying that the Database is not found.
Here are my settings.
Driver = CiscoWorks Embedded Database ODBC Tab - Data source name = upm ODBC Tab - Description = Device Performance Login Tab - Supply user ID and Password is selcted Login Tab - User ID = lmsdatafeed (i have tried DBA as well) Login Tab - Password = set using the password I estabplished with the dbaccess.pl and dbpasswd.pl scripts Database.Server name = upmEng Network.TCP/IP = HOST=<lms server ip>;DOBROADCAST=NO;ServerPort= 43800
I validated the server port using netstat -a -b -o and matching up the PID with the UPMDBEngine process shown in the LMS Manage Processes window.Windows firewalls on the remote machine and the LMS server are off.
We are using CWLMS 2.6 on a UNIX machine. And recently we changed the SNMP String to our network devices. One of L2 switches keeps logging the following message:
%SNMP-3-AUTHFAIL: Authentication failure for SNMP req from host 10.x.x.1
Where 10.x.x.1 is ciscoworks LMS server. I found a solution on many sites that suggest resetting DFM database. I stopped first the daemon manager and tried to apply the perl script:
Can't locate CRM.pm in @INC (@INC contains: /usr/perl5/5.6.1/lib/sun4-solaris-64int /usr/perl5/5.6.1/lib /usr/perl5/site_perl/5.6.1/sun4-solaris-64int /usr/perl5/site_perl/5.6.1 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.6.1/sun4-solaris-64int /usr/perl5/vendor_perl/5.6.1 /usr/perl5/vendor_perl .) at dbRestoreOrig.pl line 31. BEGIN failed--compilation aborted at dbRestoreOrig.pl line 31.
CRM.pm already exists in the path ENV{NMSROOT}/lib/perl/db
At line 31 of dbRestoreOrig.pl – the error – I found the following:
push(@INC, "$ENV{NMSROOT}/cgi-bin/dbadmin/pdbadmin"); use lib "$ENV{NMSROOT}/lib/perl/db";
I gave the system the path of NMSROOT and run the script again but it gives me the same error “Can't locate CRM.pm”
we are desperately trying to set a custom password of our WCS database in order to use it for direct SQL queries (Cumbersome over Web surface). To my knowledge there is a way to reset it however this password would be randomly generated and not available in plain text.
Until version 6 there was a feature to directly set a password via the dbadmin command.
I have done a WCS 7.0.220.0 to NCS migration prior to moving to Prime 1.2. I followed the instructions to export the WCS database via the export.bat all command and exported the database. However, when I import this zip fileto NCS there do not seem to be any of the original WCS templates. All the maps and AP details have migrated but no templates.
I have tried the export again and ploughed through the resultant zip file looking for anything that looks like template files but there is nothing immediately apparent that looks like templates.
I tried to change my password for rmeng using the following command: ./dbpasswd.pl dsn=rmeng encryption=yes npwd=NEWPASSWORD
Here is the output from the dbpwdChange.log INFO: Start changing password for database 'rmeng'... Thu Sep 29 14:51:18 GMT 2011> INFO: New userinfo updated into database
Recently I installed LMS 4.1 accidentally on the c-drive, which, as a result, fills itself with a growing database and associated logfiles. How can I move both items to another drive safely? I allready managed to move configs and downloaded software.
I have a 4402 being used as a dmz anchor and we use WCS to allow our Helpdesk to create lobby ambassador accounts. Recently they have been getting error messages when attempting to create accounts. I am seeing the database maxxed out at 2048. The docs state database entries are made up of mac filters(don't use)..ap mic/ssc(don't use)..Dynamic interfaces(minimal) management users(2) local netusers (100 approx)..and excluded clients(none). So the numbers don't add up.I am on 4.2.61.0 code.. I will say also that WCS shows alot more netuser accounts than my anchor does but no where the numbers to max out the database. Is there some other criteria that hits against the datasbase number?? And what can I do on the WCS to insure it si synch'd up against the dmz anchor other than a audit..
I have question about the basics of a high performance application and database server connection to each other. I have two servers, one application and one database server. Both of them are Windows 2008 R2 servers. I would like to connect them. What is the best configuration for quicker communication between them. Is it better to connect them through a network switch? Or directly connect them? Do I need to dedicate one of the ethernet ports on each server to separate their traffic to each other, from the internet connection traffic?
i configured pix 525 for easy vpn. About 100 to 200 people will use this service. i dont have much knowledge about radius and tacacas servers. Is local data base enough for extended authentication or should i configure the server for it ?
I have noticed poe log messages in my cisco 857 router, looking around there is mention of a cosmetic ios bug pertaining to 877 router but not the 857. BUG - CSCsd68389. Why i am getting these errors on my 857?
001586: Oct 5 11:25:06.499 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE 001587: Oct 5 11:25:06.499 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0 001601: Oct 5 13:06:29.879 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE 001602: Oct 5 13:06:29.879 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0 001603: Oct 5 13:06:31.387 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE 001604: Oct 5 13:06:31.387 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
an attacker have configured his PC with an static IP address but there is no such entry configured statically in switch, neither in DHCP snooping database.now when he want to generate traffic will switch block him? because there is no entry of his PC in the switch database.
Firstly the ACS 4.2.1 for Windows database replication does any one have and documentation on the processes required?Secondly I have a single system installed which is providing TACACS authentication for management access to a Cisco 5508 WLC, the controller prompts with a login box on connection to the web interface. When you put in the username and password pair the box comes back as if the authentication has failed. On the ACS I was unable to see any failed authentications so enabled passed authentication reporting and can see the user passing the process. The WLC is running software version 6.0.199.4. On the ACS I have added the extra two options within the TACACS interface configuration and have a ‘role1=all’ against both the user and the group the user is part of so I am confused as to why the user is still denied access.
When I try to add new MAC entrys to the WLC I get the following message unable to add mac entry to database, reached max size the problem is when I look at the stats there is only 386 MAC entry and the databse size was set to 1024 entry..The work around was to increase the size of the database to 2048.Is there any why to clean up the database?
Just installed ACS 5.0.0.21. Monitoring and reports database was working, but now is not. When trying to open, I get "Monitoring and reports database currently unavailable. Trying reconnect in 5 minutes." From CLI "sho application status acs" gives me the following:
I have the following message in my CiscoPrime LMS 4.2.2 home portal: Discrepancies: Unable to connect to Data base. Probable Cause: ANIDbEngine process may be down.
We have recently upgraded acs 5.1 to 5.3 ( normal upgrade process), all secondary (ACS-B) was deregistered from primary (ACS-A , used as configuration server and log collector) and updated successfully. But while upgrading primary acs server was rebooted manually. But later primary server was re upgraded successfully to 5.3.
Just to ensure database is not lost on primary acs (ACS-A) , primary acs was registered to one of the secondary acs (ACS-B). Initially ACS-A registered with ACS-B, both ACS was showing proper role now. ACS-A ( secondary ) and ACS-B (primary). But on New primary ACS (ACS-B) is showing new secondary (ACS-A) offline and replication pending. Whereas on Secondary ACS-B its shows primary ACS-A online and updated. But ACS replication id is gradually incrementing. ACS system is in this system for last 2 day, But not sure if there is real replication happening at backend? How long it take place to replicate completely? and how to check / verify status of upgrade?
I'm trying to do a restore from one v5.1 box to another. The file is sent via ftp from the configured repository but when the file is sent I get an error saying failed to unpack.
My restore box is running an evaluation version at level 5.1.0.44.3
