Cisco Switching/Routing :: 3333 How To Change Ports To Access

Jan 28, 2013

how can I change the telnet port and ssh port for a different ones?? for example I´d like to change de default telnet port (23) for a 3333 it is possible??

View 9 Replies


ADVERTISEMENT

Cisco Switching/Routing :: WS-X6748-GE-TX Change Module Cause Some Ports Of Server Offline

Dec 1, 2012

I have a server with 4 ethernet ports, 1G, they are bonded together, two of them was pluged into cat6500 module WS-X6724-TX. now we have moved the two ports to the replace module WS-X6748-GE-TX.
 
I have checked server side, the bond configuration are same no changed. what is possible reason replace module will cause link offline? why "sh run all" give the port is shutdown?

View 8 Replies View Related

Cisco Switching/Routing :: RV042 - Firewall Blocks Ports Though Access Rule

Dec 10, 2011

I have a Cisco RV042 Wired Router. I've got a static IP and a MS Small Business Server in my Router Network. I have forwarded the essential ports to use the IIS and the Exchange Server of my SBS2011 (HTTPS, HTTP, smtp, rpc). I have also created some access rules for these ports, but I don't have any access on my server services, if the firewall is activated.
 
Here are my Firewall Access Rules from the RV042 Web Interface:

View 16 Replies View Related

Cisco Switching/Routing :: Configure Access Ports Into Port Channel On Nexus 7K Switch?

Feb 14, 2013

Can i configure access ports into port channel on Nexus 7K switch.If possible then provide the complete configuration.....

View 2 Replies View Related

Draytek 2820 - Port Forward 3333 To Two Different Computers At Same Time?

Jul 14, 2011

I am currently using a Draytek 2820 at work and I am needing to port forward port 3333 to two different computers at the same time

View 9 Replies View Related

Cisco Firewall :: ASA5555-X - Spare Ports Into Access Ports?

May 14, 2013

Is there a way to associate spare firewall ports with another port that is being used..For example...int gi 0/2 is being used currently for my web dmz. Its ip is 192.168.10.1..Is there a way for me to associate gi 0/3 with the same layer 2 as gi 0/2 ?
 
In my webdmz I use 2 ACE 4710 proxys in FT mode. I used a layer 2 switch to connect firewall and proxys together.
 
I would like to eliminate this switch if possible..and connect both 4710's (layer 2) direct to firewall.If I could make gi0/2 - 4 part of the same vlan, then I would be good to go.

View 2 Replies View Related

Cisco :: Changing Link Ports To Access Ports In LMS 4.1?

Feb 2, 2012

One of techs accidentally connected two access ports from different switches together.  Since then, LMS is alerting them as being Link ports down.  I tried to default the config and set them to access ports without any success.  what I should do in LMS to recognize them as access ports? 

View 2 Replies View Related

Cisco Switching/Routing :: 2960 - Ports Going Up And Down?

Nov 7, 2012

we hava a couple of 2960 switches and we are logging to a syslog server. Ports keep going up and down is it normal severity (error)   ?

View 2 Replies View Related

Cisco Switching/Routing :: SG-300 - Switch With 24 SFP Ports

Nov 9, 2011

I like the SG-300 switches for SMB and I'd like use them in our network. Design is quite simple just 6 SG-300 switches connected to one central switch using SFP ports (using 2 port trunks) so I need 12 SFP ports and this is my question. Could you recomend me switch with more then 12 SFP ports from Cisco for this SMB network ? I don't know all the Cisco product lines and I can't find it.

View 2 Replies View Related

Cisco Switching/Routing :: 3560CPD Ports Won't Come On?

Sep 16, 2012

I'm currently having a problem getting the ports on a 3560CPD (ports 1-8) to power on and establish connectivity. I have them hookedup and TURNED on by a 3560 PoE 8 port switch via the uplink ports. I can console into the CPD switch just fine and getting it configured.. but when I connect anything to the ports (1-8) I'm not getting any indicator lights.

View 1 Replies View Related

Cisco Switching/Routing :: 10G Ports On Nexus 7K?

Jul 2, 2012

I''ve trying to bring up ports on a N7K-M108X2-12L card using X2-10GB-SR modules.
 
All ports are in a VDC and configured to accept the M1 card:
 
vdc_id  vdc_name                          state               mac                 type        lc
------  --------                          -----               ----------          ---------   ------
2       cam-cor-csw-sfy-01                active              64:a0:e7:43:f0:c2   Ethernet    m1 f1 m1xl

[Code]....

View 3 Replies View Related

Cisco Wireless :: Change Port Speed On 5508 Ports

May 16, 2013

We use a wlc model AIR-CT5508-K9 with eight built-in ports. I would like to know if it is possible to change the speed of these ports down to 100Mb. At  this time, they are set to auto and 1000Mbps.

View 3 Replies View Related

Cisco Switches :: Change Admin Service Ports On SG300-10?

Oct 29, 2011

I recently purchased an SG300-10 switch. Is it possible to change the TCP port numbers for the administrative services on this device? For example, if I wanted to change the web admin port from being availble on port 80 to port 8080, or move the SSH port from 22 to 2022,  how would I do this?
 
I've looked over the web admin interface, and the Security > TCP/UDP services option looks like what I want, but I see no way to change a service's listening port. Is this possible?

View 3 Replies View Related

Cisco Switching/Routing :: How To Segment The Ports On SF-300 Switch

Jul 13, 2012

The default Gateway and DHCP server is connected to port 1 of the switch.  I have various other devices on the network plugged into other ports on the switch.I want port 1 to communicate with every port on the switch, but don't want the other ports to be able to see eachother unless I specifically allow them to. For example, port 5 should see port 1, and 7, but nothing else.Everything needs to be in the same subnet.  With the older Dlink switches I am used to this feature is called "Port Segmentation" but I see no such option in this switch.   I have been playing with the VLAN settings but so far I have not been able to achieve this.

View 7 Replies View Related

Cisco Switching/Routing :: Can SM-ES3G-16-P Act As L3 Ports For Router

Mar 27, 2013

I have a SM-ES3G-16-P in a 2951. Is there any way that the service module interfaces can be transparent to the host router. Essentially I want the SM to act like an HWIC-1GE .. only with more ports!

View 4 Replies View Related

Cisco Switching/Routing :: 4500 - How To Configure The SFP Ports

May 23, 2012

How i can  configure the SFP Ports on my 4500 SERIES CHASSIS with other SFP ports on the connecting switch. I want to connect 15 switches via GLC=SX=MM to my 4506E sfp card.

View 4 Replies View Related

Cisco Switching/Routing :: 2960 Switch Ports Using POE?

Feb 5, 2013

I have a statck of 4 2960s switches, with POE powered access points on 2 of them. All of the access points appear to be functioning normally. For some reason, on 3 interfaces connected to access points, I get the following when issuing show interfaces status:
 
Gi3/0/9                      connected: T 7          a-full a-1000 10/100/1000BaseTX
^
 
My question is regarding the "T" in the status field. I can't find any documentation on this.

View 5 Replies View Related

Cisco Switching/Routing :: Will All 4-ports Of N5K Will Be Same Port-channel

Sep 12, 2012

Have 2 N2K with dual-connections to both 2 N5K, will all 4-ports of N5K will be the same port-channel. N2K as well ?

View 1 Replies View Related

Cisco Switching/Routing :: Configure 819 To Forward Ports For SQL And VNC?

Aug 15, 2012

I'm trying to forward ports for SQL and VNC using these commands in the CLI:
 
ip nat inside source static tcp 192.168.1.150 5900 interface GigabitEthernet0 5900
ip nat inside source static tcp 192.168.1.150 5800 interface GigabitEthernet0 5800
ip nat inside source static tcp 192.168.1.150 1433 interface GigabitEthernet0 1433
 
where 192.168.1.150 is my server (that hosts SQL server and that I want to be able to connect to remotely using VNC) and GigabitEthernet0 is my configured WAN interface.
 
When I try to connect from an external client I get the error:  "Failed to connect to server..." Is this a firewall issue?  How do I get round it?  The 819 is the only router/firewall in my network.

View 15 Replies View Related

Cisco Switching / Routing :: 1801 Router - Add In FTP Ports 21 And 20?

Jun 5, 2012

I have an FTP server that sits behind a cisco 1801 router.But now i want to add in FTP ports 21 and 20.  I have added them in but i cant get it working via ftp.If i plug into the LAN and give my laptop an ip address on the same range as the server (192.168.2.100) then FTP works fine -

[code]...

View 3 Replies View Related

Cisco Switching/Routing :: 3750X 1GB Ports Not Coming Up

Jan 22, 2013

I have hardcoded 1GB ports on 3750X to 1000 and full duplex for all servers connected. THe ports are not coming up with this speed and duplex settings. If I configure them to 100, I am able to see the port is up. Whereas if i connect the same servers to 2950 switches, i can see the ports working fine with 1000 speed ..we have tried with the latest universal IOS as well

View 7 Replies View Related

Cisco Switching/Routing :: First 12 Ports Of X6748 TX Are Not Working

Aug 19, 2012

I have a cisco 6509 switch in which i have 2 SUPs. I am using 3 Qty. of WS-X6748-GE-TX in the same switch. First 24 ports of module 1 and are not working. I replace the faulty moldule with the working one but now the new (good) module's first 12 ports stopped working. But when I insert the good card (the replaced one with the faulty) in other chassis it works fine.

View 2 Replies View Related

Cisco Switching/Routing :: SG300-10 - Special Ports 9&10?

Jun 6, 2012

I just purchased an SG300-10 (negular, non-POE) and planning on using it with no special configuratinos initially. Longer term, will be using VLAN and QOS for VOIP.What I would like to know is if ports 9 & 10 can be used as standard copper cat5e ports, or are they only useful for special purposes?  When I hookup my router/firewall to port 1 it all appears to work.  If I hook it up to 9 or 10, the port lights do not come on and it doesn't work.  I read that ports 9 & 10 don't have POE on the POE switch, but I assumed that all 10 ports would function with cat5e?

View 1 Replies View Related

Cisco Switching/Routing :: 4500 Ports Shows Only 0 Bit/Seg

May 20, 2012

I have installed a WS-X4448-GB-RJ45 on a 4503 chasis. I could not get input or output rate, just shows 0 bit/seg wether or not is forwarding traffic. I would like to know if I have to make any configuration or workaround. The IOS version is 12.2(37)SG1.

View 1 Replies View Related

Cisco Switching/Routing :: Ports In 4510 Not Working

Jul 10, 2012

This has been happening repeatedly time to time! we just replace the part! But now it has come to trouble us again.It happening only in one module like 6 to 10 ports wont work.

we run  IOS cat4500e-universalk9.SPA.03.02.00.SG.150-2.SG.bin will there be any bug in it?

View 10 Replies View Related

Cisco Switching/Routing :: Why Nexus 2k Has 8 Uplink Ports

Dec 9, 2012

Why the nexus 2k has 8 uplink ports ?
 
the nexus 7k or 5k can be devided into 4 virtual devices  ( using vdc)and making 8 uplink ports in the 2k will allow us to use the extender for all the 4 vdc's with 2 uplinks ( for redundancy ) from each vdc   

View 4 Replies View Related

Cisco Switching/Routing :: SW 3750 PoE Ports Are Not Delivering PoE

Sep 27, 2012

I have a switch WS-C3750E-48PD, I had two cameras that use 15.4 W in these ports and two days ago these ports go down, now the ports don't deliver PoE but are good when connect a computer.
 
SWP-D302-1-1#show power inline
 Module   Available     Used     Remaining
(Watts)     (Watts)    (Watts)

[Code]......

View 4 Replies View Related

Cisco Switching/Routing :: Which Sfp Ports In 3560x Switch

Feb 20, 2013

I was viewing the 3560x switch datasheet and i need network module C3KX-NM-10G. I have dark fiber with over 12 km distance to i guess i will be needing SFP EX for single mode.

View 3 Replies View Related

Cisco Switching/Routing :: Usb Ports On 6509 Supervisors

May 21, 2013

what the usb ports are used for on the supervisor cards?
 
I want to back up my file system, can I use a USB stick in the USB port to do this ? or are they for console use ?

View 4 Replies View Related

Cisco Switching/Routing :: Switch Ports Up And Down SG200-50P?

Feb 19, 2013

My SG200-50P Switch Log appears as follows with Random ports going up and down. I am trying to find out if this links to another problem I'm having with a Client Server software locking up on the client end. The hardware, thin clients and desktops, are working and have checked all sleep and power settings. All items in working order, now I'm wondering about the switch
 
2147483369 2013-Feb-20 15:12:07 Warning %STP-W-PORTSTATUS: gi19: STP status Forwarding
2147483370 2013-Feb-20 15:12:02 Informational %LINK-I-Up: gi19
2147483371 2013-Feb-20 15:12:00 Warning %LINK-W-Down: gi19
2147483377 2013-Feb-20 14:51:31 Informational %LINK-I-Up: gi45
2147483378 2013-Feb-20 14:51:28 Warning %LINK-W-Down: gi45

[code]....

View 1 Replies View Related

Cisco Switching/Routing :: 2960 And VLan Ports

Feb 25, 2013

New to Cisco and want to know if I can segment a port. I have two v lans. I have one internet connection at the opposite end of the building. Can the port the internet is connected to serve both V lans?

View 6 Replies View Related

Cisco Switching/Routing :: WS-X6708 TenGig Ports

Jun 2, 2013

We currently have Cisco WS-X6708-10GE blade installed in our Cisco 7606-S switch.  Each of the ports have a X2-10GB-SR tranciever.  When I look at the port with the "sh int tengig xx" command I see the following:
 
!
TenGigabitEthernet 4/1 is up, line protocol is up (connected)
  Hardware is c7600 10Gb 802.3, address is 001c.b0ca.75c0
!
TenGigabitEthernet 4/2 is up, line protocol is up (connected)
Hardware is c7600 10Gb 802.3, address is 001c..b0ca.75c0(code)

View 4 Replies View Related

Cisco Switching/Routing :: Spanned Ports On 6500?

Oct 8, 2012

I had a question on spanned ports - if i was to add another additional port with the command:
 
monitor session 10 destination interface Fa2/22
 
will this take out the existing monitoring configuration below? Will I have to add the whole line in including the interface - will this cause any disruption to existing traffic being spanned to those ports?
 
monitor session 10 source interface Fa2/3 - 5 , Fa2/8
monitor session 10 destination interface Fa2/2 , Fa2/33
 #show mon
Session 10

[code]....

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved