Cisco Switching/Routing :: 3750 And IBM 6400 Printer Dropping
Jul 15, 2012
I have a IBM 6400 printer that is connected to our cisco 3750 switch and the problem is that every 5 to 10 min the printer drops off the network.
Testing that I have conducted is the following: Attached a small unmanaged switch to the port that is connected to the printer and connected the printer as well as a laptop to the unmanaged switch. The printer again loses connection to the network after 5 to 10 min.
Connected the printer and the laptop to the unmanaged switch, but this time did not connect it to the network and the printer stayed online.I have had IBM come in and update the printer firmware, but this has not fixed the issue either.
The printer has a static IP and we are not seeing any other issues with devices except for this printer. The IBM techs are scratching their heads and pointing to the network as the problem. While from my testing I have to agree, but I cannot see what is causing the issue. The only other thing I can think of it would have anything to do with is the MAC address time or perhaps the ARP timeout. I am just having a tough time identifying the root issue but how to do further testing.
The network is pretty flat and is only a /23. Being that it is all local to the LAN routing should not be a factor, but I am willing to try anything to get this issues addressed.
View 16 Replies
ADVERTISEMENT
Feb 9, 2011
I have a IBM 6400 printer that is connected to our cisco 3750 switch and the problem is that every 5 to 10 min the printer drops off the network.Testing that I have conducted is the following:
Attached a small unmanaged switch to the port that is connected to the printer and connected the printer as well as a laptop to the unmanaged switch. The printer again loses connection to the network after 5 to 10 min. Connected the printer and the laptop to the unmanaged switch, but this time did not connect it to the network and the printer stayed online.
I have had IBM come in and update the printer firmware, but this has not fixed the issue either.The printer has a static IP and we are not seeing any other issues with devices except for this printer. The IBM techs are scratching their heads and pointing to the network as the problem. While from my testing I have to agree, but I cannot see what is causing the issue. The only other thing I can think of it would have anything to do with is the MAC address time or perhaps the ARP timeout. I am just having a tough time identifying the root issue and further testing.The network is pretty flat and is only a /23. Being that it is all local to the LAN routing should not be a factor, but I am willing to try anything to get this issues addressed.
View 1 Replies
View Related
May 13, 2012
We have a switch that, when configuring auto qos on and edge port facing video equipment, the upstream port channel drops. I was wondering if no auto qos would have to be configured on the member ports of the port channel prior to enabling auto qos on any other ports.
View 2 Replies
View Related
Mar 26, 2013
I have this 3750 stack where all ports are configured as below.The data runs on VLAN 1 and the voice runs on VLAN 100.
interface FastEthernet1/0/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,100
switchport mode trunk
Name: Fa1/0/1
Switchport: Enabled
Administrative Mode: trunk
[code]....
The PCs and Polycom VOIP phones are plugged into the switch and they work fine.However, if I plug printer(s) into the ports, they cannot be accessed.I have to end up removing the trunk mode before it can work like below.
Name: Fa2/0/43
Switchport: Enabled
Administrative Mode: dynamic auto
Operational Mode: static access
Administrative Trunking Encapsulation: negotiate
Operational Trunking Encapsulation: native
[code]....
View 12 Replies
View Related
Oct 4, 2012
We encouter problems flow between two switches at work. The first is a Cisco 3550 and the second is an Alcatel 6400. For the tests, I connected a PC on each switches on acces port. The 2 switches are connected by a trunk port (the 24th for each switches).
I forgot to tell that the 2 switches are on the same vlan (5). I made some tests and it takes about 2 minutes to transfer 45mo from one pc to the other one.
I can give a part of the configuration :
! Stack Manager :! Chassis :system name vxTargetsystem daylight savings time disable! Configuration:! VLAN :vlan 1 disable name "VLAN 1"vlan 5 enable name "toip"vlan 5 port default 1/1vlan 5 ip 192.168.0.0 255.255.255.0! VLAN SL:! IP :ip service allip interface dhcp-client vlan 1 ifindex 1ip interface "toip" address 192.168.0.253 mask 255.255.255.0 vlan 5 ifindex 3! IPX :! IPMS :! AAA :aaa authentication console "local"aaa authentication telnet "local"aaa [code] ..............
View 2 Replies
View Related
Jun 30, 2012
Do I need the Universal image to perform stftp on a 3750 or 3750-X?
View 8 Replies
View Related
Oct 10, 2011
I'm looking at adding a Cisco 3750-X switch running c3750e-universalk9-mz.122-55.SE1 (IP base license) into a stack of 3750-G switches running c3750-ipbasek9-mz.122-55.SE1.bin Given that the version and feature sets are the same I don't forsee any compatibility issues. Would there be any reason why a universal image wouldn't stack correctly with other switches running the single .bin file?
View 9 Replies
View Related
Jan 15, 2011
I have two different friends that are having problems with their printers which are connected to their home network. One has an Lexmark printer wired to their router and running Windows Vista on a laptop. The other has an HP printer connected to the network wirelessly and the laptop is running Windows 7.
In both cases, they are setup to use DHCP. When first setup and the printer software was installed, everything worked fine. Now they each get a message showing 'offline' when they try to print. I went to each of their houses, downloaded and installed the latest printer software and they were printing again. After a short time, the same problem surfaces.
View 9 Replies
View Related
May 21, 2012
We have a stack of switches that is at the max number of members allowed in the stack. Problem is we are running out of port density and need to add more ports. So instead of adding a whole new stack I would rather replace 2 of the 24-port swicthes with 48-port switches.
If the two 24-port swicthes we are removing are stack members and neither of them are the stack master, I should be able to replace the 24-port switches with the 48-port switches without bringing the master offline? If the new 48-port switches are running the same IOS version as the current 24-port swicthes, they should add themselves to the stack?Would I have to tell the new 48-port swicthes what switch numbers they are replacing in order for them to be added to the stack since we are at the max number of members?Also since the 48-port swicthes are replacing 24-port switches will the master give the 48-port switches the configuration for only the 24-ports?
View 11 Replies
View Related
Dec 26, 2012
We have a customer who uses about 20 x c2960's switches for access layer and 2 x c3560e for distribution layer. C2960's uses C2960-LANLITEK9-M , Version 12.2(58)SE1. Everything was working fine. Now we got information, that sometimes there are problems with connectivity. Customer tries to reach internet.
SW11#sh int fa0/18
FastEthernet0/18 is up, line protocol is up (connected)
Hardware is Fast Ethernet, address is e8ba.806a.4412 (bia e8ba.806a.4412)
[Code].....
View 7 Replies
View Related
Mar 3, 2013
I have a production L3 3750 stack with 2 WAN connections, which is connected to the companies WAN infrastructure using EIGRP.Recently there have been a number of hello drops from one site, which is causing the EIGRP adjacency to drop and so the whole site goes down from the rest of the WAN. Physical cabling has been replaced towards the ISP router, and the ISP have found no issues on their equipment or circuit.on occassions the utilisation is high on the link, so reasons for the hello packets to be not reach the end point, but other times the links are lowly used.The WAN links are active/standby, so the active is always used, but the EIGRP adjacency is dropped by both links.
View 7 Replies
View Related
Jan 16, 2012
I have a problem where only the 2950's switches go transperant. They drop VLAN1 thus no CDP snmp packets. The users keep working fine but our NMS center keeps calling me at 3am when this happens.
These are access switches that connect to stacked 3750's. Some of the uplinks are using media converters that i have been trying to get removed. But i doubt that it could be the cause of the vlan1 going down.
View 3 Replies
View Related
May 10, 2012
Networking is not my gig, but it has to be at this very moment. We have an ASA 5505. Let me explain what's going on.
On Tuesday I wanted to be able to use the ASDM since there is less room for error. But we only had a console set up. So I ran the following commands...
in ($config)
http of course didn't do anything incomplete command
http 192.168.1.2 255.255.255.255 didn't anything incomplete command
http 192.168.200.254 255.255.255.255 inside
[Code]....
Everything started working after that. Everything worked fine all of wednesday and thursday. Then this morning it stopped processing again. When I traceroute it gets to the machine that is hooked up to the console and stops. So I'm guessing its actually getting to the ASA router and being swallowed up again...
View 23 Replies
View Related
Oct 12, 2012
Our environment consits of 4 cisco SGE2010 switches (stacked). I have implemented STP BPDUGUARD and Portfast on all client ports (suspected a loop). And our uplink to the Server DMZ recieves almost all of it's BPDU packets back(is that normal?) The issues lies where we have random ports dropping out - across all stacks for seconds at a time. We get errors/warning such as,Pinging between the DMZ network appears to be fine. Pinging from the client/switch network show packets being dropped quite frequently.All devices are on VLAN1 (I've have researched this and this could be the cause of the issue)
View 12 Replies
View Related
Dec 9, 2011
some of our switches have the switchport mode trunk command configured between the 3750 switches but other 3750 switches connected to our 6509 core switch do not have the switchport mode trunk command to permit Vlans from going across the swtiches instead it has an ip address and says no switchport what is the difference between does two. Is trunking used only for Layer 2 and L3 is used to route interface vlans?
View 2 Replies
View Related
Oct 24, 2012
I have a network with a Catalyst 3750 as the main switch and then some Catalyst 2960 switches that are plugged in to that. I have a server running windows server 2008 with a couple of virtual machines running in Hyper-V. I created 4 VLANS listed below and gave the 3750 the following IP Address.I would like the 3750 to only be configurable from VLAN 40 but currently every VLAN can connect to it, I noticed in the standard web page settings there was a setting for "Management VLAN" but it was set to 1 and would not let me change it, I kinda assumed that was for the management port in the back.-Now the tricky part, I was trying to set up routing between the VLANs and so far I have only been able to get a sort of "all or nothing" routing to work. I can turn IP routing on and add two or more VLANs to the routing and it works fine. But what I was hoping to do is create a couple of "junction vlans" that would only route to one or two other vlans. For instance, I wanted to create a VLAN 100 that routed to VLAN 20 and 30 but nothing else. I also want to route VLAN 1 just to VLAN 30, and so on. I am able to do each one of the cases but only one, it seems like the switch only supports one "routing table" am I missing something or is this just a limitation of the switch?
View 2 Replies
View Related
Oct 8, 2012
Is a 3750 sw capable of handling full routing tables and what can you recommend in a small mutihomed BGP router or switch capable of handling full routing tables?
View 2 Replies
View Related
Oct 28, 2012
I have a network with several catalyst 2960 switches and one catalyst 3750. I have created two VLAN and set up the proper routing and everything is working fine there. I have a client/server application that used multicast in the initial start up for the client to determine available servers, the issue is one of my clients is on a different VLAN then the server. I am able to route the multicast using MVR as long as both the server and the client are plugged into the 3750 by creating a static route, making the server a source port and the client a receive port. Unfortunately I need the client and the server plugged in to different 2960s. My question is how do I establish multicast routing between the two and perferably do it dynamically (always route multicast traffic from one VLAN to another).
View 2 Replies
View Related
Dec 17, 2011
I have been looking into this for a while and I can't seem to figure out why my 2nd vlan is not able to connect properly to the net.
My switch has 12 ports where my devices connects directly, they are all on Vlan 1 and they all work perfectly. on Port 12 I have a dlink router that is connected to a cable modem. the dlink router has an Ip address of 192.168.0.20
I created a second vlan (vlan2) and enabled dhcp relay on it. then I assigned port 9 on the switch to (vlan2)my laptop which is connected to port 9 seems to get an ip address fine and able to ping only some devices on my network (vlan1) and is not able to go out to the internet. I think it has to do with the routes. [code]
View 4 Replies
View Related
Jul 27, 2012
I have the task of replicating the router config on a 3825 router on a 3750 switch. Reason is we are taking out the router and replacing it with the switch to make use of the router for other functions.
Below is main part of the router config:
!
ip source-route
ip cef
!
!
multilink bundle-name authenticated
!
license udi pid CISCO3825 sn FCZxxxxxxx
!
vlan internal allocation policy ascending
[code].....
The 3750 switch I have runs C3750E-UNIVERSALK9-M, Version 12.2(55)SE3 on a LAN BASE license.
The first thing I have done is to order for a license upgrade to IP BASE which would give the support for OSPF routing.I do not see much of an issue with the Interface configs, however, I am not too sure about replicating the routing config on the switch.
My question is can I run the commands as shown for the OSPF routing on the switch? If not, can I get suggestions on how best to set this up on the switch?
View 4 Replies
View Related
Mar 24, 2013
In 3750 switch,I have configured intervlan routing.I have three vlans Vlan 10,vlan 20,Vlan 30 and I have assigned IP address for that Vlan.In vlan 10,I have connected one systen gigabitethernet 0/1 interface.From my system I am able to ping vlan 10 ip address but I can't able to ping other vlan ip address (vlan 20,vlan 30).Is it possible to up the protocol for all that time.
View 2 Replies
View Related
Jan 24, 2013
For intervlan routing, Is 'IP routing' command enabled by default on a 6500 series switches based on the IOS?and on 3750 switches, do we need to enable the "ip routing" command manually for intervlan routing?
View 1 Replies
View Related
Nov 21, 2012
I am using a 3750 as a default gateway for multiple Vlans on a few 2960 switches. The trunk lines are configured and working and I have assigned ip addresses to each of the Vlan interfaces on the 3750. My issue is that I can only ping the ip address on the Vlan interface of the 3750 if I have a working computer plugged directly into the Vlan on the 3750. I only have 3 vlans on the 3750 that have hosts directly connected (vlans 2, 10 and 40) the other vlans ( 20 and 70) don't have any clients plugged into them on the 3750 but the hosts reside on 2 different 2960s that connect via trunk ports. How do I keep the vlan interface on the 3750 switch pingable when I don't have hosts directly connected in that vlan on the 3750? (yes, I have enabled ip routing on the 3750)
View 5 Replies
View Related
Oct 17, 2011
I have a simple design with 3750. I configured a route-map which define a next hop. I defined this route-map on a policy on a vlan interface.When I test some ping and a debug ip policy and it seems that my policy never match.Is there any mechanism that prevent the switch from using PBR? I think of CEF .
View 5 Replies
View Related
Jan 28, 2013
In our datacenter we have a 3750 stack with IP base image. I have enabled PBR and reloaded the switch. Show sdm prefer says i am using default template. The reason i want to use PBR is that we have 2 firewalls on the same work and want to be able to have granular control over which gateway out of the network they use but still be able to access all internal resouces accross wan and locally.
Created access list to identify traffic:
access-list 10 permit 10.2.3.59 (test workstation on vlan 3)
Created policy:
route-map TestASA permit 10
match ip address 10
set ip next-hop 10.2.0.3
Assigned policy to the user vlan3:
ip policy route-map TestASA
Results:It changed the default gateway to the above gateway but i could not access any resources on any other vlan, could not access resouces accross wan.
View 16 Replies
View Related
Apr 16, 2012
I have been looking into this for a while and I can't seem to figure out why my 2nd vlan is not able to connect properly to the net. My switch has 12 ports where my devices connects directly, they are all on Vlan 1 and they all work perfectly. on Port 12 I have a dlink router that is connected to a cable modem. the dlink router has an Ip address of 192.168.0.20,I created a second vlan (vlan2) and enabled dhcp relay on it. then I assigned port 9 on the switch to (vlan2),my laptop which is connected to port 9 seems to get an ip address fine and able to ping only some devices on my network (vlan1) and is not able to,go out to the internet.
View 3 Replies
View Related
Sep 5, 2012
I have a simple design with 3750.I configured a route-map which define a next hop.I defined this route-map on a policy on a vlan interface.When I test some ping and a debug ip policy and it seems that my policy never match.Is there any mechanism that prevent the switch from using PBR?
View 10 Replies
View Related
Mar 11, 2012
I'm running into what seems a basic ip routing config problem with a Catalyst 3750 (IP Base) switch. I have several VLANS configured on the switch with IP routing enabled, and the switch is connected to the inside interace of a new ASA 5520 as follows:
ASA5520 IP (Default gateway): 192.168.1.1Switchport Gi1/0/1 is configured as a routed port, IP address 192.168.1.3 255.255.255.0Example VLAN is VLAN 100, IP address 192.168.100.1 255.255.252.0 From the switch CLI, I can ping all VLAN addresses, as well as the ASA5520, and the client laptop I'm testing with from VLAN 100.
From the client laptop on VLAN 100, I can ping all switch interface and VLAN addresses (inter-VLAN routing is working), including 192.168.1.3, but I CANNOT ping the default gateway at 192.168.1.1.
Here is the relevant configuration information on the 3750:
!
no aaa new-model
switch 1 provision ws-c3750x-24
system mtu routing 1500
[Code]....
View 4 Replies
View Related
Jan 1, 2012
I have a Cisco 3750 with private VLANS configured.. VLAN 2 is the "primary", VLAN 3 is "isolated" and VLAN 4 is "community". This is all working correctly, however I now have the need to another VLAN called "production". I need the production VLAN to be able to reach all the private VLAN hosts (community and Isolated), and vice versa
View 2 Replies
View Related
Oct 30, 2011
For intervlan routing, Is 'IP routing' command enabled by default on a 6500 series switches based on the IOS?hes, do we need to enable the "ip routing" command manually for intervlan routing?
View 2 Replies
View Related
Dec 2, 2012
I have 2 ISP connected to Router A and Router B.Both the routers are connected to the core 3750 switch.. I want to send the traffic from the switch that goes to router A to router B..[code]
View 10 Replies
View Related
Feb 27, 2013
I have just bought two Cisco 3750 and stacked them. When in global config mode, The IP Routing Command does not exisit.
See Version below
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 05-May-11 15:40 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02800000
View 5 Replies
View Related
Nov 23, 2011
I am using a cisco 3750 in my network as a gateway, and above it I use a squid machine for caching my internet. My network is like this:
Basically I have two VLANs on my network which are VLAN10 and VLAN100, VLAN10 is the cooperate network of my office. VLAN100 is the management VLAN which i use for the switches. I keep the squid as well the client in VLAN10.
squid (192.168.1.50)---->cisco 3750(192.168.1.123)---->Distribution Switch(cisco 2960)---->client PC (192.168.1.5)
I have done nating on squid and internet is working pretty fine when I use the client gateway as the squid, but when I use the cisco 3750 as my gateway after adding route maps for forwarding the internet traffic coming to the cisco 3750 to squid it disconnects me from internet as well I cannot even reach the switches from the corporate network. These are the only Lines I used for the routing:
!
route-map proxy-redirect permit 10
match ip address 110
[Code]......
View 6 Replies
View Related
