Cisco Switching/Routing :: Does 887 Support SIP Forwarding
Mar 26, 2013Does this Router Support SIP Forwarding?
View 1 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 881W - IOS Port Forwarding Commands For Port Forwarding
Apr 7, 2013I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.
View 1 Replies View RelatedCisco Switching/Routing :: Switching Fabric And Forwarding Rate C3750x
Aug 6, 2012It is said that the switching fabric of WS-C3750X-24T-E is 160Gbps.Could any body tell me what is switching fabric, any relevance or difference from forwarding rate?,Is there any document to know how will the switch reach the 160Gbps full switching fabric performance?
View 5 Replies View RelatedCisco Switching/Routing :: Nexus 7010 / VSS - Does It Support Virtual Switching?
Apr 9, 2010Does the nexus 7010 support virtual switching yet? All of the posts I have found from about a year ago say that it is going to be supported, but there were no dates listed. I heard the same thing from Cisco a while back, but haven't followed up with it.If it is supported finally are there any configuration guides available for it?
View 7 Replies View RelatedCisco Switching/Routing :: Port Forwarding On 881?
Dec 1, 2011I have my Cisco 881 router up and running, routing all traffic on my small network. I am wanting to utilize port forwarding to enable FTP (forward port 21). All docs I have found say you need to be running Configuration Professional (not Express) to do this.
View 1 Replies View RelatedCisco Switching/Routing :: Does Catalyst 3550 Support Inter Vlan Routing
Jul 24, 2007Does Catalyst 3550 switch support inter vlan routing ?
View 12 Replies View RelatedCisco Switching/Routing :: Nexus 5010 Support For Inter VLan Routing
Jan 10, 2012Can nexus 5010 supports inter v lan routing , as there is no core switch and router available in current network.
View 2 Replies View RelatedCisco Switching/Routing :: 2960 Switch Support IP Routing?
Nov 16, 2011Does the Model "WS-C2960-24PC-L" Supports IP Routing or not?
View 9 Replies View RelatedCisco Switching/Routing :: 876 - Port Forwarding Used From Internet
Nov 28, 2011I have an problem with my new Cisco 876 Router. I configured port forwarding to access internal network devices from the internet . This works good from external but with my old Fritz box I was able to connect to this internal devices from the same internal network with the dyndns address.
So here is a short review for this:
DYNDNS Address port tcp 80 - > 192.168.0.80 tcp port 80
from ex tern it works but with source address example 192.168.0.20 to destination DYNDNS address tcp 80 (maps to 192.168.0.80 tcp 80 ) it doesn't work. Is there any trick in the config of cisco to let this scenario work?
Cisco Switching/Routing :: Configure Port Forwarding On 887
Aug 11, 2012I need to configure the port forwarding on Cisco 887 to forward port 22 on Public IP to a LAN IP port 2200. I don't know anything on Cisco router at all, beside telnet to the cisco and quit . Any step by step command.
View 9 Replies View RelatedCisco Switching/Routing :: 2821 Forwarding Udp Broadcast
Jul 31, 2012I have 2821 router configured with two subinterfaces. This router is connected on cisco 2960 switch. The trunk on 2960 is configured without any prunning of vlans. I noticed that udp broadcast traffic is being forwarded through my router on native vlan 1 (this interaface do not have ip address configured). Below is configuration:
Router:
interface GigabitEthernet0/0
no ip address
duplex auto
[Code]....
Cisco Switching/Routing :: 881 To Do Range Port Forwarding
Jan 21, 2013I have a Cisco 881 router in my office and I would like to do port forward for port 5060, and 10000 - 20000 to my PABX(192.168.1.61). After I did some research from internet, understand that we need to NAT by using following command to do port forward for port 5060. ip nat inside source static udp 192.168.1.61 5060 XXX.XXX.XXX.XXX(WAN IP) 5060 extendable However, now I'm facing an issue to perform port forward for a huge range of ports like 10000 to 20000.
View 9 Replies View RelatedCisco Switching/Routing :: 1841 / Port Forwarding Via SSH?
May 2, 2012I want to SSH into a Cisco 1841 router and depending on the suffix added to the SSH (i.e ssh myrouter.myroute.com 2002), would like it to forward this request to a terminal server.Can this be done? If so, how does one accomplish this? I have done something similar with RDP but I was not sure about SSH.
View 3 Replies View RelatedCisco Switching/Routing :: 877 - NAT And Port Forwarding With 6 Static IP?
Aug 23, 2011I've 8 Static IP assigned me from my ISP.
x.y.w.56 (not usable)x.y.w.57x.y.w.58x.y.w.59x.y.w.60x.y.w.61x.y.w.62x.y.w.63 (no usable)Subnet 255.255.255.248
I've a 877 Router and I would to:NAT al LAN Client with x.y.w.57Configure some ports ( i.e. 80 and 443) to be forewarded from x.y.w.57 to one LAN Server ( i.e. 192.168.0.1)Configure some ports ( i.e. 443) to be forewarded from x.y.w.58 to another LAN Server ( i.e. 192.168.0.2)
Cisco Switching/Routing :: 3750x 24s Not Forwarding Packets
Mar 1, 2013We have a 3750x 24s acting as a root switch for about 10 other 3750x's. Everything else seems fine, but the device stopped forwarding packets to the applied static route. [code]
View 3 Replies View RelatedCisco Switching/Routing :: 870 12.4 - Forwarding UDP Port Ranges
Jan 2, 2013I feel like this has probably been asked a thousand times over, but it doesn't seem to work for me. TCP works fine. I can't find any definitive answers, I'm still a novice with the IOS.
The purpose behind opening the ranges of UDP ports to the interface and forwarding is because the people in question want to run a VOIP phone from their home, but they have a home grade Internet connection, so therefore no static IP. Also, they're not going to pay for a router to create a S2S VPN.
Also, from one of the remote sites for which there is a VPN ( the 192.168.6.X/24 site), the audio is only one way. The phone guy says "i need to open ports both way through the VPN), but I feel like that's already been done??
For my other site ( 192.168.15.0/24 ) I have an IPSEC over GRE tunnel going, I don't know about the status of the voice phone there..or if its even made it there
Here's my config...i'm redacting things like public IP's, VPN keys, and the like
#show run
Building configuration...
Current configuration : 6525 bytes
!
! Last configuration change at 14:51:00 EST Wed Jan 2 2013 by ctouch
! NVRAM config last updated at 14:57:46 EST Wed Jan 2 2013 by ctouch
[Code]...
Cisco Switching/Routing :: Setting Up DNS Forwarding In 877W Router?
Apr 29, 2013Probably this is a trivial question but I have not found any response to it. What I would like is to set my cisco 877W rotuer up in order to act as a DNS server which forwards DNS queries following these simple rules:
1.- If the name is within my local domain *.ib forward them to my local DNS 172.21.238.229 and .230, and
2.- Else forward them to the chosen public domains (i.e. 8.8.8.8 and 8.8.4.4).
Cisco Switching/Routing :: AP1242G Forwarding Traffic From One Subnet To Another
Feb 20, 2012I’ve configured a small WLAN for a school that wants to have wireless network access for their staff as well as for guests doing presentations. They want the staff to have access to everything on the 192.168.1.0 /24 network as well as the Internet. They want the guests to only have access to the Internet. I have attached a picture which shows how the network has been configured with 4 Cisco AP1242G AP’s attached to a Cisco SF302-08MP PoE switch and then to a Symantec Security Gateway to the Internet.
I can authenticate wirelessly to the STAFF SSID and ping anything on the 192.168.1.0 /24 network and access the Internet.I can authenticate wirelessly to the GUEST SSID and ping anything on the 172.16.1.0 /24 network, but not anything on the 192.168.1.0 /24 network (which is what we want). However, when on the GUEST network you can’t access the Internet. I added a default route to the Cisco 302-08MP switch to 192.168.1.1 (Symantec firewall) thinking that would forward the traffic from 172.16.1.0 /24 to the Symantec firewall out to the Internet, but that isn’t working.How would I go about getting the traffic from 172.16.1.0 /24 to hit the Symantec firewall and the Internet, without hitting anything else on 192.168.1.0 /24? Do I need to put the Symantec firewall in a different subnet like 192.168.2.0 /24? Am I missing anything else?I’ve worked with Extreme Networks & HP / 3Com CLI in the past, but never with Cisco and never with web based management
Cisco Switching/Routing :: To Use DFC3 6500 For Forwarding Packets
May 31, 2012From everything I read it seems like DFC is for forwarding packets. When I hear packets I think of layer3. If my 6500s are just being used as a big layer2 only switch do I need a DFC? I am being told the 6500 looks at the layer 2 frame and the layer 3 patch header information before forwarding the frame. How true is this?
View 1 Replies View RelatedCisco Switching/Routing :: 1921 - Dynamic Port Forwarding With PAT
Feb 29, 2012How can I implement this with Zone-based Firewall on my 1921?
I'm looking for something as simple as the port triggering function on a Linksys or Netgear router.
Cisco Switching/Routing :: Configuring Port Forwarding For 2950?
Jul 11, 2012Is it posible to config port forwarding on cisco 2950 or other switchs.if such a option is there ple let me know ho to config port forwarding on cisco 2950 switch..
View 1 Replies View RelatedCisco Switching/Routing :: 3750 Port Forwarding Inbound
Dec 15, 2011I have a non-cisco router with a public WAN address. This is conencted to a 3750 switch internally. The switch is the default gateway for all VLANs, and the gateway router has static routes back to the 3750. The Router provides NAT, no NAT is done on the switch.My requirement is to port forward port 29 000 so that I can access a server on VLAN4 via this port.
So, I have: Router: Port 29000 map to 192.168.4.1 (Switch VLAN4 address)
The question is, how do I route port 29000 from the 3750 to the server on 192.168.4.42 ? what exactly I should add in order to port forward port 29000 incoming form my router, to my server on 192.168.4.42.
Cisco Switching/Routing :: 2801 Secondary IP / Port Forwarding?
Mar 26, 2012I have the above firewall which is working as it should but I have came across an issue with a recent upgrade to Microsoft Exchange 2007 and Outlook 2010 Autodiscovery due to the way the port forwarding has been configured for Outlook Web Access (OWA) on the router.
The router is forwarding OWA requests to the exchange server on port 8080 and the default website in IIS on the Exchange Server under which OWA sits and unfortunately Autodiscovery has been set with an SSL port of 8080. I think the reason for this is that we have an RDP server and the router is forwarding all port 443 requests to this server. Due to this Outlook clients cannot connect to Exchange through autodiscovery and cannot therefore get FREE/BUSY and a few other things.
I have 5 public IP addresses and only use two at the moment, one on the ADSL router and one on this firewall. I have no spare interfaces on either the router or the ADSL router.
My question is, is it possible to have a secondary ip address set on the public facing interface and set different rules for this IP which would allow me to forward requests on that IP to a different server?
Cisco IOS Software, 2801 Software (C2801-ADVSECURITYK9-M), Version 12.4(16b), RELEASE SOFTWARE (fc3)
Building configuration...
Current configuration : 4778 bytes
!
version 12.4
service timestamps debug datetime msec
[Code].....
Cisco Switching/Routing :: Router 881 Range Port Forwarding
Apr 3, 2012I have a Cisco 881 router in my office and I would like to do port forward for port 5060, and 10000 - 20000 to my PABX(192.168.1.61).After I did some research from internet, understand that we need to NAT by using following command to do port forward for port 5060.
ip nat inside source static udp 192.168.1.61 5060 XXX.XXX.XXX.XXX(WAN IP) 5060 extendable.However, now I'm facing an issue to perform port forward for a huge range of ports like 10000 to 20000.It is impossible to ask me add one by one?
Cisco Routers :: Does RV042 Router / Firewall Support Port Forwarding From Internet
Aug 5, 2011I am using an RV042 router/firewall -- firmware v1.3.13.02-tm -- connected to a cable modem.I have one public address (WAN1) assigned by my ISP's DHCP server.All my machines on the LAN have static IPs. (RV042 DHCP Server is disabled.)I have set up port (80) forwarding to 192.168.1.101 The HTTP port forwarding does work if an http client on the LAN sends a request to http://<public-ip>:80But I cannot get a response if I send a request to http://<public-ip>:80 from a machine on the WAN.
I did configure Access Rules to allow http traffic (and then tried to allow *all* traffic) between a single IP on the WAN and 192.168.1.101 The incoming log table shows a connection is made from the http client on the internet to the correct http server on the LAN, but there is no resonse from the LAN to the remote client.Is my configuration the problem, or is this feature not supported by the RV042 router? Could my cable modem be blocking outbound traffic?
Linksys Wired Router :: Does RV042 Firewall Support Port Forwarding
Aug 5, 2011I am using an RV042 router/firewall -- firmware v1.3.13.02-tm -- connected to a cable modem.I have one public address (WAN1) assigned by my ISP's DHCP server.All my machines on the LAN have static IPs. (RV042 DHCP Server is disabled.)I have set up port (80) forwarding to 192.168.1.101. The HTTP port forwarding does work if an http client on the LAN sends a request to url...But I cannot get a response if I send a request to url... from a machine on the WAN.I did configure Access Rules to allow http traffic (and then tried to allow *all* traffic) between a single IP on the WAN and 192.168.1.101.
The incoming log table shows a connection is made from the http client on the WAN to the correct http server on the LAN, but there is no resonse from the LAN to the WAN.Is my configuration the problem, or is this feature not supported by the RV042 router?Could my cable modem be blocking outbound traffic?
Linksys Wireless Router :: How Many Port Forwarding Entries Does WRT310N Support
Dec 13, 2011I want to upgrade my router but I need a router that supports more port forwarding entries for my applications. I have my eye on the WRT310N router but I need to know how big its port forwarding table is.
View 2 Replies View RelatedCisco Switching/Routing :: 25565 Port Forwarding Not Working On Some Ports
May 15, 2013I've created some port forwards from my public IP (Dialer0) to our private LAN but only the 25565 port forward works. I've even added an any statement to the Nat source list Homenet_NAT. Full config attached. My Cisco router is an 877W. [Code]
View 6 Replies View RelatedCisco Switching/Routing :: Setup Port Forwarding On 800 Series Router?
Jan 14, 2013I just setup my homelab today, after having Cat5e installed so I can run my servers and network equiptment over wired network as well as setting up a wireless system. I got everything setup and its going great I can access everything from my office now including a E4200 Linksys router that I setup to do RiP (was only choice pretty much, or NAT), and my 891 Cisco Router which is my internet connection.
I use to have the linksys setup to do port forwarding but now I need to figure out how to do it on the cisco 891 router via command line.
Below is my current configuration. I need to be able to access my server which is behind my router by Remote Desktop. I also have a web server, and the kids also play minecraft, and have a server setup so I need to be able to forward their port as well.
[URL]
Ths is from the link above, would I just do like that but then put in my IPs and is that my Private IP I use this or my public facing. Also he has "interface Dialer1 6881" again after the port in the second and third row. I dont really understand what they have there. I understand basic access list and such though I am extremely rusty.
!
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.0.0.2 6881 interface Dialer1 6881
[Code].....
Cisco Switching/Routing :: Config Port Forwarding In 3750 Switch
Nov 6, 2012I have a 3750 catlyst switch in my network and it is like a distubation switch,And for the nating and dhcp nomadix is using as gateway in the same network. for one of my local PC i need to config the port forwarding in 3750 switch. How to config the port forwarding on 3750 switch,
View 3 Replies View RelatedCisco Switching/Routing :: Forwarding IEEE 802.3 Raw Packets Through 2960G Switch
Dec 5, 2011I have a requirement to monitor downstream data feed from a remote site and feed it to multiple destination devices for recording. The source data will be fed into a port on a Cisco 2960G switch then, using the monitor function, be forwarded to multiple interfaces. This works fine for normal Etherent II traffic. We tried a test using a device that generates IEEE 802.3 Raw packets ('type' field is used as a 'length' field) but found that while the traffic appeared to be accepted by the input port with no errors it was not forwarded to the destination ports, even when using the monitor function. I did try the 'encapsulation replicate' feature with no luck. It does not forward these packets even if I set all the ports into a common VLAN and let the switch just perform a normal switch function (non monitor).
if it is possible to get the IEEE 802.3 raw packets to pass through the switch and if it is, how to or what I need to do to make it work?
Cisco Switching/Routing :: Configuration Multicast Packet Forwarding On 3750?
Mar 3, 2013I have one server which run some application for wireless user. this server forward multicast packet to wireless user. server and wlc physically connect to cisco 3750 switch.i want the server forward the multicast packet to wireless users.server access vlan 4.wlc controller have 2 vlan: 90 and 110.and wireless user some of vlan 90 and some of vlan 110.i enable igmp snooping on wireless controller. and enable globally command but it is not working.which additional configuration i need on cisco switch.
Switch(config)# ip igmp snooping
Cisco Switching/Routing :: Relay Agent And Forwarding Query On 2960?
Nov 23, 2011I need support on understanding and configuring dhcp relay agent And forwarding. Lets say a bunch of TCP/IP devices required a dhcp ip where it is installed on a perticular server to run so. The server having dhcp pool where it provide the devices with IP addresses as he recieve queries from them requesting to release their addresses. On 2960 switch no dhcp configured and ports assigned under specific vlan under those devices. The issue here, if power goes down and booting process started, the devices started to ask the server for ip add and it takes too much time and somehow it does not take ip and those request kind a dropped. As the minimum requirement is to configure relay agent on the switch and forwarding and multicast?
View 7 Replies View Related
