We have an issue installing VPN Client (5.0.01.0600) on HP 4320s (WinXP). Installer was completed as usual but since the VPN Client installation a "Blue Screen of death" with cscentr.sys error shows up when pc is startng. Pc restarts over and over again.. Finally, in order to keep the PC operative we have to uninstall it and remove VPN client keys from the registry, after that pc will work perfectly.
View 2 RepliesI have discovered after days and days of trying everything with my DIR655 that there is, apparently, a well known issue with file transfers when using a Seagate Blackarmor NAS.It seems completely bonkers that a very ordinary router of a very good make will not work with a very ordinary NAS of another very good make!
View 1 Replies View RelatedI want to make an offer for a public tender for SF200 Switches (P/Ns SLM224GT and SLM248GT). The end user is already using Cat 6 cables and someone from the committee told that these Switches does not support Cat 6 cables and that the SLM224GT doesn't work correctly with an existing SG200 (SLM2008T) switch.
View 1 Replies View RelatedI can connect to my LAN, but with local access only. I've been to the mfg's forums and tried their fixes, driver updates, and manual setups- no joy so I've reset to auto defaults. This laptop connects to several other routers wi-fi without problems. The WNDR3700 solved all my previous router problems, was truly plug and play, and may have cured me athsma as well. The event logs show a time-out during the semaphore portion of the log-in.
View 12 Replies View RelatedI have a WAG120N annex A on firmware v1.00.16, which appears to be working fine with a variety of devices (iPhone, squeezebox, vista pc, linux pc, android) via wireless and ethernet.
However, my Macbook 4,1 running OSX 10.6.6 keeps losing internet connection regularly and the only way to get it back is to turn the airport off and then on again. It's very odd, appears to still be connected to the router but just can't access the internet!
The Airport version and driver is: AirPort Extreme (0x14E4, 0x88) Firmware Version: Broadcom BCM43xx 1.0 (5.10.131.36.1)
I have an Inspiron 9400 with a Dell 1390 wireless adapter. My wireless connection usually works fine but I noticed that I was having trouble getting a wireless connection working at my parents' and in-laws' houses. I just ignored the problem for a while but I recently decided to figure out what was causing it. Long story short, any time a router uses WPA-PSK (I think this is also called WPA-TPIK) encryption then my wireless is very, very slow -- unusably slow. If there is no encryption or any other encryption (WPA2, WPA-EAS, WEP, any enterprise variation) then it works fine -- I tested all these with my own router (which normally is on WPA2). Also, many other laptops were able to get connected to both my parents and in-laws routers so the problem clearly lies with my laptop.
My computer is out of warranty so without paying $50 I can't get Dell customer service to: 1) confirm if this a known problem 2) let me know if there is an easy fix or 3) that myadapter is bad in a specific way. I've tried searching these forums but I haven't had much luck turning up an exact duplicate of my problem. I've updated to the latest drivers for my adapter.
I recently purchased an E4200, but I am experiencing slow/inconsistent performance and connection problems with iPhone 3G, 3GS and 4. The iPhones are running the latest firmware 4.3. The E4200 has also been updated to the latest firmware 1.0.01 build 10. I do not experience these problems with various laptops, and I did not experience them with a previous Cisco router WRT610N, nor with a D-link DIR825 in another location. The security is set to WPA2 Personal and all the other settings are the same from the prior router. If I disable the security, I do not experience the connection problems, but still experience the slow performance. If I switch back to the WRT610N, I do not experience any problems. this a E4200 firmware issue yet to be resolved?
View 9 Replies View RelatedWhy does my HP Photosmart B110 printer not work wirelessly through my new Belkin Surf N300 modem router? Everything is fine using my old Philips CONN-X router.Is bonjour connectivity the issue? All my other devices work fine connected through the Belkin wi-fi.
View 2 Replies View Relatedi have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
how to make the java SSH thin client applet bigger in SSL VPN Clientless portal?It works and all that but the window is literally half the size of the monitor and unworkable. You can't even hit tab! (tab moves focus around the browser...)I am using the latest java applet (Oct 2012) and ASA OS 8.4(5)
View 3 Replies View RelatedDo the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.
I have a setup involving 3 clustered AP541 running off a sg300 switch. The wireless network setup VAP has one entry for vlan 1 with station isolation disabled. Is there anything more I need to do to allow one wireless client to ping another wireless client - am I missing something - i assume this is possible.Needless to say wireless clients can ping non wireless clients and vice versa quite happily. Everything is running with factory default settings more or less.
View 4 Replies View RelatedThe message ID I can use to filter VPN clients connecting and disconnecting from the Firewall?
View 1 Replies View RelatedWe have a Cisco 5505 firewall and working to setup VPN through the firewall, what Cisco vpn client should we download for our users to have the right client on their desktop/latops.
View 3 Replies View Relatedi have a 5510 with a working VPN but discovered that anyone connecting from a public IP can connect to VPN but can't go anywhere.so if i have say a linksys wifi on my cable modem and a private IP i can connect no problem. but if i'm on like a verizon data card which gives me a public IP i can connect to VPN but receive the below errors in my asa logs and can not reach anything on the network.What do i need added to allow remote ends without a nat device to also work?
View 4 Replies View RelatedI have configured Clientless SSL VPN on 2821 router with IOS12.4//Its running fine and I am able to open local portals I have mentioned in the SSL URL List.
View 1 Replies View RelatedUsing VPN client 5.0.7 Able to get vpn ip address But cant access remote desktop or any network inside, I was able to access before But I dnt known what changes happen on my laptop which is unable to access now ,I have reinstall the client again but no use' Able to access the same vpn & rdp with another laptop & also other users can access' Except my laptop What can be the issuse with my laptop.
View 1 Replies View RelatedSince last week we are having problems with remote users working with VPN client on Windows XP.The connection is stablished but no data traffic occurs.
As we didn't do any change in vpn remote settings I did a test from Linux machine running VPNC client and it works well.It sounds so weird because it happens only on Windows client platform.We have CISCO ASA 5510 and PIX 515 running 8.0(4).
I have a requirement as per our security standard all VPN user ID must change the password during intial logon
I am using cisco VPN client 4.6 .0 anf 5.0.0 suspending my IPSEC VPN on head end ASA 5520 device , authenticating VPN user using ACS 5.3.0 . All the VPN user are created internally on ACS 5.3.0 , i have turned on password management on ASA configuration towards tunnel group and i have enabled MS-CHAPv2 on ACS for password change during intial logon .
I have created internal user with password change during inital logon and tired connecting to my VPN .Intially it prompt for password change , after changing the password to new password .
When i am trying to connect , i am seeing strange behaviour VPN client is not able to connect to the peer , VPN client is not responding for few minutes , What should the problem , is there problem VPN client or ACS configuration .
when i remove this password management from tunnel group , VPN users are able to connect with any issue , but the concern is none them able to change the password , we not have ADS on our network all User ID are created internal on ACS server .
I recently setup a vpn using netgear vpn/firewalls...got it working...but couldnt log on to the domain.then changed the dns server on the machine to my server on the othersidewas able to join the domain and logonfrom the otherside i can ping the server and gatewayBut i cant ping a machine (Camera security system) address 10.0.0.10no replyi have a software client that connects to the machine...and its working on the otherside.the addresses are in the same range 10.0.0.x as the camera system on the otherside
View 1 Replies View Relatedwhy my client can't internet access from my config
(INTERNET)-------->[ROUTER]---->[CLINET]
Clinet :
Ubuntu LTS 12.04
IP 192.168.100.2
Netmas 255.255.255.0
Gateway 192.168.100.1
DNS Server 202.134.1.10
We have a few users connecting to another companies Firewall using the Cisco VPN Client, we are pretty sure our PIX (sat at the edge of our network) is causing issues whereby after an unknown amount of time the VPN client will timeout and lose connectivity.I did outputted some level 7 debug to syslog and I cannot see anything that happens during the time he has lost connectivityI can see his RDP packets getting denied to the remote ends private IP address but nothing that shows a denial or a drop of anything from our pix.We are sure its this pix as we used to connect via a different route and a different pix and it never dropped
View 2 Replies View RelatedI can connect to it fine and access everything behind the VPN. I have a Windows 7 machine 32 bits. He can connect to the VPN just fine but not access anything behind it, he is running Windows 7 64-bits. This is not a new setup, the VPN has been working before. If I debug ISAKMP and IPSEC in the ASA I see nothing out of the ordinary. The only thing I see is that the VPN client on his machine is showing that the counter for discarded packets is increasing. This is Ciscos explanation to discarded packets. "Packets discarded—The total number of data packets that the VPN Client rejected because they did not come from the secure VPN device gateway." So it seems that the client does not believe that the packets are from the ASA. I have no idea why that would be and what could have changed that made a functioning VPN turn into a non functioning one. He can not remember doing any major installs or something like that which could mess with the client. We uninstalled the version he was using and installed a slightly newer version but it made no difference.
View 1 Replies View RelatedIs it possible to log when a user connects/disconnects their VPN session? They are connecting to an asa 5510.
View 5 Replies View RelatedI just recently bought a ASA5505 with a licence that can have 2 WebVPN Peers, I would like to have a phone to my CCME server as one of the options within that web-vpn thingy.
View 3 Replies View RelatedThe embedded telnet client is OK but what about a ssh client? It could be a very useful feature for debugging remote servers or network appliances in a secure fashion.
I understand the overhead concerning the image size and CPU usage, but it seems that both the flash memory and the CPU could handle ssh client integration. Naturally, it as to be fully compatible with IPv6 in dual stack enabled environment.
ASA 8.21Within a clientless WebVPN homepage, is there a way to open a listed link/bookmark in a new tab? When I try to do it with the browser (right click.. Open in New Tab) it simply opens the site in the current tab.
View 2 Replies View RelatedI have a fresh install of LMS 4.0 on Windows Server 2008 Standart SP2. I have one NIC with static IP configuration. I also disabled DHCP client.The problem is follows: when I go to Inventory - Device Administration - Add/Import/Manage Devices, I always get this error:Error in communicating with DCR Server. DCR Server may be down. Please start the DCR Server and then refresh the page.Reload server/ Daemon Manager dont solve this.I try to beat this problem 2 days already. Second uninstall also doesnt solve the problem..
About a week ago I tried to clear log files which was 270gb (syslog.log) and after that restarted the server. And all inventory devices suddenly disappear! I could find it from search menu but cant access - cisco works said that there is no such a device in Device Repository or I havent enough right to view it (but i logged as admin). And after this i failed to add any device in Inventory. So I reinstall Cisco Works and get that DCR error..
I have been trying to conect a Cisco VPN client through an ASA and it makes the connection but doesn't allow any traffic through. The ASA does have a site to site VPN attached to the outside interface.I suppose the first question is it possible to allow VPN client to connect through an ASA 5500 from the inside network when there are Site to Site VPN's already attached to the outside interfaces?If possible then what have I missed. I have tried adding NAT exempt for the traffic between the internal networks and "an IPSEC pass thru Inspect Map".
View 4 Replies View RelatedCompletly new to Cisco ASA and need to get this working ASAP.ASA 5505 8.4(1) is the secondary FW and I need for it to allow everything going out and block everything coming in but for the VPN clients. Since a Cisco moron, I used the ASDM and it's wizards to make this work, which might explain my situation.
[code]....
My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x server or service (tried telnet, RDP, ping, etc.)
I have configured my ASA5520 to act as VPN server. It accepts connections from the internet and then it authenticates the user to a Windows 2008 Server via Radius.Everything works fine if I use the VPN client embedded in Microsoft Windows. Conversely, if I try to configure Cisco VPN Client, I cannot find where to define the PSK string.
View 3 Replies View RelatedI have configured VPN client on my ASA 5510,
I am trying now to telnet my call manager on port 5060 and on port 2000.
When i am connected localy i am able to telnet both ports, but when i am trying to connect through cisco VPN client i am able to telnet the port 2000 and not able to telnet 5060. Both ports are on the same call manager.
When using windows VPN i am able to telnet both ports.
if i removed inspect SIP from: policy-map global_policy class inspection_default
As part of site to site VPN configuration, I need to configure VPN server & Client using Cisco 877 only.
View 1 Replies View Related