Cisco VPN :: Create Another S2S VPN In Same ASA5505?
Jun 17, 2011
I need to create second VPN in same ASA5505, it has already a VPN to one of our clients. So it alredy have a transformset,cryptomap,policy.Now i need to create new one. i like to create a seperate transformset and crypto map for this 2nd VPN with a new name to identfy very easily.But i have doubt like may it will affect the current VPN? because it has another VPN with another tranformset and cryptomap.......
1) will it affect the current VPN?
2) do i need to create a seperate tranformset and cryptomap? or with same tranformset and cryptomap with different number.....if it possible to create multiple cryptomap then i would like that to create.....
I have a Cisco ASA 5505 and a Cisco/Linksys RV042. I would like to crerate a site to site VPN between them, and from what I've read it is possible. So I set up the connection on both routers but When I click on connect on the RV042 nothing happens. I've made sure that the encryption settings are the same on both routers but I can't get them to connect to each other. I think the problem may be with the RV042 as the ASA has other site to site VPN connections without any proble (although they are on other ASAs). I saw this thread [URL] but I'm not sure how to disable phase 2 on the RV042 or enable it on the ASA.
what setting I need to change on either router to make the site to site work?
How can i create customized user in Cisco ASA 5505 having the following Privileges? note i dont have AAA server.User can only perform show running, ping, traceroute, show xlate. I have review one of the firewall configuration and found two type of password defined, what is the difference b/w enable and password?
I have an ASA5510 with VPN L2L two operand normally. I need to create another VPN L2L. When you add the 3rd VPN always drop one of those that were operating. What can be?
I need to create a LAG consisting of 4 ports on my SG 300-20.
When I go to create the ports via Port Management - Link Aggregation - LAG Management - LAG1 - Edit and move ports 5,6,13,14 over as LAG Members - Click apply I get Port gi5 belongs to a VLAN. If I try to add them individually I get the same error, i.e. port gi6 belongs to a VLAN, port gi13 belongs to a VLAN, etc..
I'm baffled by a lot of new features of LMS4.2 and seem lost where to start looking.Our client needs to periodically make changes to switches to change their port settings.They have specific descriptions with a certain string. Let's say the description say "Cisco phone".The task is to create either template or ad-hoc Netconfig job that will send changes only to those switchports.
I have a weird problem. I can't create a vpn in windows xp. I click on create a new connection, the connection wizard opens up, I click "connect to the network at my workplace", and this happens mm31z.jpg at Free Image Hosting.I can't select VPN connection. I have no idea what is causing this, maybe a service is not running, I don't know. I tried uninstalling/ reinstalling my network and it did not work.
I am having a LAN with 30 switches and . Is it possible to create seperate dashlet/dash board to moniter only the uplink trunk ports of Lan Excluding acces ports with LMS 4.2?
I want to create a VPN between two PC's, (the server "Data" and "Remote Desktop" check the topology below), the Router Clabeck (cisco 2811 ) is connected to the internet through int f0/0 using a PPPoE connection and connects all the LAN PC's by PAT to the internet (you can see all the configurations in the Show Run below), the "Remote Desktop" is any PC with internet connection.
F0/1 F0/0 DATA--------------------SW-------------------ROUTER(Cisco 2811)---------------------INTERNET---------------REMOTE DESKTOP 192.168.1.51 192.168.1.254 201.122.53.177 192.168.1.1 Current configuration : 2116 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec
We currently run dual ASA 5510's in A/S config on our main campus. We would like to create a VPN tunnel to a branch campus. Trying to decide between a 5505/5510/5512x, We would like to extend many of the capabilities of our network to the branch campus which will be 20-50 users on a 50mb/10mb internet connection.
Domain login System Center workstation management Cisco WCS Shoretel voip (Cisco NAC?)
Several different VLANs for wireless guest, student traffic, staff traffic, voip traffic, etc. Which device would be best and should we get the security plus license with it?
We are about to move our IT rack to a data centre and will be adding a new Layer 3 (Catalyst 3560) switch beyond our ASA 5510 which will be providing our existing WAN plus another SVI which will be carrying our HSRP range.
I have never configured a switch to use two SVI's before and can't seem to find the relevant docs online.
I inherited a Ciscoworks installation, and would like to create a credential set for a certain class of device. However, after searching around the interface and documentation, I cannot find instructions on how to add a credential set with certain snmp, ssh, credentials. We use ACS authentication and authorization?
create a VPN dongle for my office users. I have Cisco ASA 5005 firewall. I want to give them remote access to our intranet but if the user doesn't have the dongle which has the certificate on it he/she can not connect to my office intranet.
i need to design a site-to-site VPN and VPN for remote users. I have attach a drawing, need to know if this is good setup. Mostly my concern is security. Im using ASA5520 for edge firewall and Linux firewalls are for additional security.I have to create 5 site-to-site VPN using IPSEC and 5 remote VPN clients. Site-to-site VPN are for trusted Office and remote VPN clients are only for our staff use.
From the diagram ASA5520 is configured as followed
outside interface is set to security 0 and connected to boder router to internet, inside interface is set to security 100 which is connected to a linux firewall which then goes to our internal lan.DMZ interface is set to security 50 which is connected to DMZ segment ,I decided to use the 4th interface for all VPNs which is set to security 100, and for this 4th interface i have created two sub interfaces vlan 400 (for site-tosite VPN) and vlan 500 (for remote access VPN). I did this because i have to use two separate linux firewall box. Linux firewall box for Site to Site VPN is configured with NAT but Linux firewall box for remote access VPN users are configured without NAT. I also want to know do i need to create a CA server or can i use pre-shared key with XAuth for remote access VPN users?
I am running windows 7 ultimate 32bit its been a long time that i've been trying to set a private server for call of duty 4 i've looked all over the web but no guide get my server online.i just read that i need to do something with ports etc(i dont even know what that is)
I have in one building a computer which has a real ip using and i want to connect to that building not via teamviewer or bomgar i wish to use VPN, how do i configure it? And why it is better using VPN?
On our HP switches we have an 'Outside' VLAN where any device connected to these VLAN ports can use the ISP's 'outside' IP addressing for direct Internet access to bypass our firewall. We use this for videoconferencing devices.What is the correct way to do this on a Cisco SF-300-48P??Presently I have ports 1-4 in vlan 50 Outside as 'untagged,' and the same ports as 'forbidden' in vlan 1 Default. Is this the correct configuration?? In HP switches these ports in vlan 1 Default would be configured 'No' and 'untagged' in vlan 50 Outside.Tried talking to Cisco but their phone support is not working.
Using CCP I am trying to create a NAT entry for a range of ports. CCP window for a new NAT has only one entry for the port #. Is it possible to set uf port ranges in 877 router?
I'm trying to setup this router with my IP range 192.168.100.1 to 192.168.101.254 but if I try to enter a subnet mask other than 255.255.255.0 I get the error - Invalid subnet mask. It should be 255 for given class of IP address at 255.255.xxx.0.
Every other device on my network allows that subnet mask, why not this router, it's stopping access from my 192.168.101.x devices.
Do I have to create a userid and password for every vpn client user that I have on the Cisco router?,When I use the cisco VPN client it asks me for a userid and password,every windows 2003 ad account that I tried did not work,when I used the id that I use to telnet into my cisco to access the console it worked,Do I have something configed wrong or do I need to create duplicate ids?,I am using ESY VPN server on a cisco 851 awg k9 router.
