I need to create a LAG consisting of 4 ports on my SG 300-20.
When I go to create the ports via Port Management - Link Aggregation - LAG Management - LAG1 - Edit and move ports 5,6,13,14 over as LAG Members - Click apply I get Port gi5 belongs to a VLAN. If I try to add them individually I get the same error, i.e. port gi6 belongs to a VLAN, port gi13 belongs to a VLAN, etc..
how to get these ports out of a VLAN?
On our HP switches we have an 'Outside' VLAN where any device connected to these VLAN ports can use the ISP's 'outside' IP addressing for direct Internet access to bypass our firewall. We use this for videoconferencing devices.What is the correct way to do this on a Cisco SF-300-48P??Presently I have ports 1-4 in vlan 50 Outside as 'untagged,' and the same ports as 'forbidden' in vlan 1 Default. Is this the correct configuration?? In HP switches these ports in vlan 1 Default would be configured 'No' and 'untagged' in vlan 50 Outside.Tried talking to Cisco but their phone support is not working.
View 6 Replies View RelatedI want to create a network with the following switch SF 300 - 08.I am not use to GUI.I am having problems setting the settings.Currently, i have assigned each port with a vlan 1 to 8 for ports 1 to 8.How do i do an inter vlan with the GUI? Also, i want to restrict port 7 and 8 to certain ports only. Example:Port 7 and 8 can read port 5 and 6 but not others?
View 9 Replies View RelatedGot two pc's, two routers and one switch, and two serial cables and I want to create a network.
View 4 Replies View Relatedi want to connect dvr to the internet i need the step to take and process of creating a public LAN Address
View 1 Replies View Relatedhow to create a password to access one pc to another pc .like i have 3 pc it is connecting throw switch .ip addresss is 192.168.1.1,192.168.1.2, 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
View 1 Replies View RelatedI have a brand new SG500-28P sitting on my desk.
The swtich is configured and going to operate in L3 mode. All ports are still assigned to the default VLAN ID 1. I have created several new VLAN's. Once I configure and aplly an IP Interface to a certain VLAN the swtich becomes inaccessable right away. I am pretty sure I am not pulling my own VLAN under my connection. Every port is inaccessable. I have to pull the power plug and restart the swtich with its saved configuration. Even when I add another IP interface to the default VLAN 1, same issue. I have tried lot's of things, but can't get it to work properly. I have just upgraded to the latest firmware.
I have configured dozens of SG300 swtiches which is very easy. This one does not work with me.
When it comes to fiber optics my knowledge is very limited. All I know is that they can carry data at high bandwidth for a long range at blazing speeds etc.My boss has asked me to link several buildings to the network and I am led to believe that joining them through fiber optics to be best since we are expecting a lot of data traffic between.I have done the normal RJ-45 networking with Gigabit networking in my organisation but need your assistance on how to join each of the buildings through fibre optics.So far this is my plan.Draw up the fiber optic lines from the main building to each building.All the buildings have Gigabit Cat6e cabling and network in each.I am planning on using a single mode media converter to convert the end of the fibre optic to the normal RJ45 connector and plug it to each switch at each of the ends of the fiber optic cable .Am I going in the correct direction?I don't even know the gadgematics required except for the cables them selves, crimping tools, the media converter. There is about 300-400 metres in between of each building from the main building.Also, I believe that we need to create cross over cables as in the normal way we do in connecting 2 switches. Your input is very valuable to me.
View 9 Replies View RelatedIs it possible to create a stack with 5 WS2960-S series switches OR are you limited to only creating a stack of 4 switches.
View 1 Replies View Related I used two sf-300 switch and create 4 vlans and intervlan routing is working fine.
Port 1 - 10 -------------> Vlan 1
Port 2 -20----------------> Vlan 2
Port 3 - 30------------------> Vlan 3
Port 4 - 40--------------------> Vlan 4
giga1 -----------------> connected to router (This router used for intervlan routing).
SF-300 Port 1 is connected to Internet Modem. This modem worked as dhcp server also for vlan 1, my problem is that when vlan 1 is not communicate to vlan2,3,4 and 2,3,4 are not communicating.
How i can communicate vlan 1 to 2,3,4 vlan.
how i can connect the modem in switch? Access port or Trunk port ( Presently available in vlan 1 Access port)Any route i need to make? sf-300 or modem or router?
Trouble connecting to the internet wireless with Motorola SB6120 and Linksys WRT120N. The modem works directly with LAN but as soon as I try to use the router, I can connect to the network but no internet is available.
View 4 Replies View Relatedhow do i create 2 networks using 1 cable modem and 1 router and i would like to add a firewall thinking of using xywall usg20 for the firewall..... the issue is i have a small business with 1 point of sale and1 back office computer.(network1) and i would also like to use an air port wifi to offer wifi to my cleints on a seperate network(network2) not allowing access to network1 and i want a firewall on network 1 to protect the back office and pos system
View 4 Replies View RelatedI have a router on which I would like to create a port channel that spans two different Nexus 2248TP switches, and then create a couple subinterfaces on the router's po interface. I've done this successfully on my primary router, but the config doesn't seem to work on the backup router. The primary is running IOS 15, while the backup is running 12.4.25d advanced IP. I do see the trunk come up from the switch side, and my router subinterfaces and po interface show up, however I'm not able to get anywhere from the router. It's not even able to reach other hosts on the same network. As soon as I remove the port channel config and use the physical interface and assign the same address used on the port channel interface, everything works as expected and I have connectivity.
interface Port-channel21
no ip address
hold-queue 150 in
!
interface Port-channel21.248
encapsulation dot1Q 248 native
ip address 100.100.100.1 255.255.255.0
[URL]
trying to perform a RME InventoryCollection job with cwcli inventory I wasn't able to perform this task.
View 2 Replies View RelatedI have problem with device cisco srp 521 , my problem is haw to create two VLAN-s first will be to WAN link, second for Management.
View 2 Replies View RelatedI need to create second VPN in same ASA5505, it has already a VPN to one of our clients. So it alredy have a transformset,cryptomap,policy.Now i need to create new one. i like to create a seperate transformset and crypto map for this 2nd VPN with a new name to identfy very easily.But i have doubt like may it will affect the current VPN? because it has another VPN with another tranformset and cryptomap.......
1) will it affect the current VPN?
2) do i need to create a seperate tranformset and cryptomap? or with same tranformset and cryptomap with different number.....if it possible to create multiple cryptomap then i would like that to create.....
I have an ASA5510 with VPN L2L two operand normally. I need to create another VPN L2L. When you add the 3rd VPN always drop one of those that were operating. What can be?
View 2 Replies View RelatedI'm baffled by a lot of new features of LMS4.2 and seem lost where to start looking.Our client needs to periodically make changes to switches to change their port settings.They have specific descriptions with a certain string. Let's say the description say "Cisco phone".The task is to create either template or ad-hoc Netconfig job that will send changes only to those switchports.
View 2 Replies View RelatedI have a weird problem. I can't create a vpn in windows xp. I click on create a new connection, the connection wizard opens up, I click "connect to the network at my workplace", and this happens mm31z.jpg at Free Image Hosting.I can't select VPN connection. I have no idea what is causing this, maybe a service is not running, I don't know. I tried uninstalling/ reinstalling my network and it did not work.
View 5 Replies View Relatedhow to create ip sec tunnel using these parameters. customer ip where tunnel has to be connected 1.1.1.1
ISAKMP Parameters: (Phase I)
Encryption: AES-256 or 3DES
Authentication Mode: Pre-shared key
[Code]......
I am having a LAN with 30 switches and . Is it possible to create seperate dashlet/dash board to moniter only the uplink trunk ports of Lan Excluding acces ports with LMS 4.2?
View 1 Replies View RelatedI want to create a VPN between two PC's, (the server "Data" and "Remote Desktop" check the topology below), the Router Clabeck (cisco 2811 ) is connected to the internet through int f0/0 using a PPPoE connection and connects all the LAN PC's by PAT to the internet (you can see all the configurations in the Show Run below), the "Remote Desktop" is any PC with internet connection.
F0/1 F0/0
DATA--------------------SW-------------------ROUTER(Cisco 2811)---------------------INTERNET---------------REMOTE DESKTOP
192.168.1.51 192.168.1.254 201.122.53.177 192.168.1.1
Current configuration : 2116 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]....
im trying to create a VPN between a Cisco ASA5510 and an ASR1002 when my Loopback interface is The Source IP . [code]
View 1 Replies View RelatedWe currently run dual ASA 5510's in A/S config on our main campus. We would like to create a VPN tunnel to a branch campus. Trying to decide between a 5505/5510/5512x, We would like to extend many of the capabilities of our network to the branch campus which will be 20-50 users on a 50mb/10mb internet connection.
Domain login
System Center workstation management
Cisco WCS
Shoretel voip
(Cisco NAC?)
Several different VLANs for wireless guest, student traffic, staff traffic, voip traffic, etc. Which device would be best and should we get the security plus license with it?
I woulke like to know is it possible to create a VTI tunnel from my 877 router to my ASA, rather than creating a cryptomap on the router ?
View 1 Replies View RelatedWe are about to move our IT rack to a data centre and will be adding a new Layer 3 (Catalyst 3560) switch beyond our ASA 5510 which will be providing our existing WAN plus another SVI which will be carrying our HSRP range.
I have never configured a switch to use two SVI's before and can't seem to find the relevant docs online.
I inherited a Ciscoworks installation, and would like to create a credential set for a certain class of device. However, after searching around the interface and documentation, I cannot find instructions on how to add a credential set with certain snmp, ssh, credentials. We use ACS authentication and authorization?
View 1 Replies View Relatedcreate a VPN dongle for my office users. I have Cisco ASA 5005 firewall. I want to give them remote access to our intranet but if the user doesn't have the dongle which has the certificate on it he/she can not connect to my office intranet.
View 2 Replies View Relatedon my Active/Stanby ASA5505 has Sec+ License(trial), I can't create more then 3 nameif interface however,
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Unrestricted
Dual ISPs : Enabled perpetual
VLAN Trunk Ports : 8 perpetual
Inside Hosts : Unlimited 17 days
Failover : Active/Standby 17 days
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled 17 days
AnyConnect Premium Peers : 2 perpetual
i need to design a site-to-site VPN and VPN for remote users. I have attach a drawing, need to know if this is good setup. Mostly my concern is security. Im using ASA5520 for edge firewall and Linux firewalls are for additional security.I have to create 5 site-to-site VPN using IPSEC and 5 remote VPN clients. Site-to-site VPN are for trusted Office and remote VPN clients are only for our staff use.
From the diagram ASA5520 is configured as followed
outside interface is set to security 0 and connected to boder router to internet, inside interface is set to security 100 which is connected to a linux firewall which then goes to our internal lan.DMZ interface is set to security 50 which is connected to DMZ segment ,I decided to use the 4th interface for all VPNs which is set to security 100, and for this 4th interface i have created two sub interfaces vlan 400 (for site-tosite VPN) and vlan 500 (for remote access VPN). I did this because i have to use two separate linux firewall box. Linux firewall box for Site to Site VPN is configured with NAT but Linux firewall box for remote access VPN users are configured without NAT. I also want to know do i need to create a CA server or can i use pre-shared key with XAuth for remote access VPN users?
i want to build a website, but i don't have money
View 1 Replies View RelatedI am running windows 7 ultimate 32bit its been a long time that i've been trying to set a private server for call of duty 4 i've looked all over the web but no guide get my server online.i just read that i need to do something with ports etc(i dont even know what that is)
View 3 Replies View RelatedI wanted to have 3 vlan for my switch just for security reasons.(We do not want different Vlan members interact with each other)
I created 3 untagged Vlans on 48 port switch.
So ports 1-16 in Vlan 192.168.1.1/25
So ports 17-32 in Vlan 192.168.2.1/25
So ports 33-48 in Vlan 192.168.3.1/25