Cisco WAN :: SRP 521 How To Create Two VLANs
Mar 4, 2012I have problem with device cisco srp 521 , my problem is haw to create two VLAN-s first will be to WAN link, second for Management.
View 2 Replies
ADVERTISEMENT
Cisco Firewall :: Create Vlans In ASA 5510?
Oct 25, 2011I need to be able to create vlans in my ASA 5510.
I can'T find anywhere to do this.
I've tried the "routers command" I know, like vlan databse and it does'nt work
Is there a way to "enable" vlan on a ASA 5510 ?
Cisco Switching/Routing :: How To Create Vlans On Sge2010p
Jun 18, 2012I just want create vlans on switch sge2010p
Scenario:
vlan10
ip address 192.168.10.254/24
vlan20
ipaddress 192.168.20.254/24
vlan10 needs internet.
I have a static ip internet which is 200.33.22.11 gateway: 200.33.22.10 I have a router configured working as gateway, It has ip 192.168.2.1.
I have configured two vlans. But when I try to check if vlan has internet, it doesn't work.
Cisco Switching/Routing :: SG500x Create Several VLANs
Aug 27, 2012I need to set up a VLAN. We just bought the SG500x switches and we need to create several VLANs.
So for example:
192.168.1.x --> Vlan 1
192.168.2.x --> Vlan 2
192.168.3.x --> Vlan 3
What I would like to know is how do I come about setting this up and do I have to do something with my DHCP server to allow this to happen?
Dell :: Create VLANs For PowerConnect 6224?
Jan 13, 2013I have just purchased Dell PowerConnect 6224? how can i create two VLANs (vlan 10 - 192.168.10.x/24 & vlan 20 - 192.168.20.x/24) that can communicate with each other without setting servers/workstation network gateway point to the vlan ip address?
View 2 Replies View RelatedCisco WAN :: Create Two SVI Int On MSFC To Enable Routing In Between Two VLANs On 7613 Chassis
Mar 12, 2013is there any specific way to create the SVI Interface on MSFC , actually I need to create the two SVI Int on MSFC to enable routing in between two VLANs on 7613 chassis.
View 2 Replies View RelatedCisco Switches :: Used Two SF-300 Switch And Create 4 VLans And Inter-VLan Routing
Apr 8, 2013 I used two sf-300 switch and create 4 vlans and intervlan routing is working fine.
Port 1 - 10 -------------> Vlan 1
Port 2 -20----------------> Vlan 2
Port 3 - 30------------------> Vlan 3
Port 4 - 40--------------------> Vlan 4
giga1 -----------------> connected to router (This router used for intervlan routing).
SF-300 Port 1 is connected to Internet Modem. This modem worked as dhcp server also for vlan 1, my problem is that when vlan 1 is not communicate to vlan2,3,4 and 2,3,4 are not communicating.
How i can communicate vlan 1 to 2,3,4 vlan.
how i can connect the modem in switch? Access port or Trunk port ( Presently available in vlan 1 Access port)Any route i need to make? sf-300 or modem or router?
Cisco Switching/Routing :: Create Different Policies For Vlans On 3750 Table
Jun 27, 2012I am looking for a way to create different routing policies for vlans on a 3750 table.
My set up is
Clients----------- 3750 -------------- ASA ---------------Servers
|
|
|
Internet Routers
What i am trying to do is on the 3750 to route private networks to my ASA on different subintefaces and all internet to my internet routers . Each VLAN has a different GW for the internet. On some case i have the ASA as a default gateway. ASA default default route is 3750 where i need the internet traffic to be spllited on the proper Boarder router.
Cisco Switching/Routing :: Create Trunk Between 4507 And 3945E Router And Route Two VLans
Feb 12, 2012i want to create a trunk between 4507 & 3945E router & route two vlans from router 3945E
4507# vlan 99 & 51
# int vlan 99
# ip add 10.22.100.1/24
#int vlan 51
# ip add 10.22.103.1/24
[code].....
4507 version : IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
3945E: 15.1(2)T4 what I am missing?
Cisco Firewall :: To Deploy ASA5585 In Between User Vlans And Server Vlans
Jun 1, 2012WE have to deploy ASA5585 in between User vlans & server vlans. we have to find all the ports that needs to be opened on firewall. any tools to do same.
View 2 Replies View RelatedCisco IP-PBX - ACL Between VLANs
Aug 29, 2012I manage IP-PBX(VoIP) in my work place which is consists of switches and a router as shown below,My intend is to seprate between Vlan 1 and Vlan 40, 41.(no packet exchange between vlan 1 <-> vlan 40,41)the Vlan 1 has C class 1 and Vlan 40,41 has C class 40,41.
View 2 Replies View RelatedCisco WAN :: How To Set Up 2 Vlans On 891
Jul 8, 2012Site A will have the ip address of 192.168.1.x subnet mask 255.255.255.0 and will need to commmunicate with Site B (ip address 192.168.100.x subnet mask 255.255.255.0). Neither site needs internet access, so I don't have a default gateway. I have a cisco 891 with the ip address of 192.168.1.254. I don't have anything set up on the cisco right now (no running config). Is this possible to set up?
View 11 Replies View RelatedCisco :: LMS 4.x - Create RME InventoryCollection Job Via CLI?
Sep 23, 2012trying to perform a RME InventoryCollection job with cwcli inventory I wasn't able to perform this task.
View 2 Replies View RelatedCisco VPN :: Create Another S2S VPN In Same ASA5505?
Jun 17, 2011I need to create second VPN in same ASA5505, it has already a VPN to one of our clients. So it alredy have a transformset,cryptomap,policy.Now i need to create new one. i like to create a seperate transformset and crypto map for this 2nd VPN with a new name to identfy very easily.But i have doubt like may it will affect the current VPN? because it has another VPN with another tranformset and cryptomap.......
1) will it affect the current VPN?
2) do i need to create a seperate tranformset and cryptomap? or with same tranformset and cryptomap with different number.....if it possible to create multiple cryptomap then i would like that to create.....
Cisco VPN :: ASA 5510 - Create Another VPN L2L
Jul 19, 2011I have an ASA5510 with VPN L2L two operand normally. I need to create another VPN L2L. When you add the 3rd VPN always drop one of those that were operating. What can be?
View 2 Replies View RelatedCisco Switches :: Cannot Create LAG On SG 300-20
Oct 3, 2011I need to create a LAG consisting of 4 ports on my SG 300-20.
When I go to create the ports via Port Management - Link Aggregation - LAG Management - LAG1 - Edit and move ports 5,6,13,14 over as LAG Members - Click apply I get Port gi5 belongs to a VLAN. If I try to add them individually I get the same error, i.e. port gi6 belongs to a VLAN, port gi13 belongs to a VLAN, etc..
how to get these ports out of a VLAN?
Cisco :: Create Job In LMS 4.2 To Configure Only?
Oct 31, 2012I'm baffled by a lot of new features of LMS4.2 and seem lost where to start looking.Our client needs to periodically make changes to switches to change their port settings.They have specific descriptions with a certain string. Let's say the description say "Cisco phone".The task is to create either template or ad-hoc Netconfig job that will send changes only to those switchports.
View 2 Replies View RelatedCan't Create A VPN In Win Xp
Jan 26, 2013I have a weird problem. I can't create a vpn in windows xp. I click on create a new connection, the connection wizard opens up, I click "connect to the network at my workplace", and this happens mm31z.jpg at Free Image Hosting.I can't select VPN connection. I have no idea what is causing this, maybe a service is not running, I don't know. I tried uninstalling/ reinstalling my network and it did not work.
View 5 Replies View RelatedCisco :: Ping From Pc Over Two Vlans?
Jan 19, 2013when we ping from pc in lan 1 to pc in lan 2, what protocols we walk through in request and in response??
View 14 Replies View RelatedCisco :: Bridging Two VLANs?
Sep 14, 2011I have a 3 building client currently on a single LAN/subnet/VLAN1. The client wants to install two public APs in their other buildings. I have selected the Cisco WAP4410n for a few reasons, Price, as budget is a factor for them, the 4410n can have up to 4 SSIDs, and can accommodate different VLANs, and it is PoE.
The public side is to have no access to the LAN, just the internet.According to the documents I have read on the 4410, I am to create two SSIDs, one not broadcasted (VLAN1) and one that is broadcasted and public (VLAN2) Both SSIDs would be Isolated from each other.
I assign the switch port attached to the AP to VLAN2, but cannot access the internet. I believe that the two VLANs need to be bridged in either a L3 switch or a router, is this correct? Is that the only way I will be able to get internet access in this situation?A while back someone posted a link to a Cisco workshop. It was set in a spaceship, and the student, me, had to get internet access to different parts of the ship by installing different APs and antennas. Also had to give the people and aliens on the ship different levels of access.
Cisco :: Getting Bridge Between 2 VLANs?
Oct 2, 2012if I want to bridge between 2 VLANs ,can I use IRB like I would use in a router for bridging to ethernet interfaces for example?
Config example:
bridge irb
interface vlan 10
ip address 192.168.10.1 255.255.255.0
bridge-group 1
[code].....
Cisco WAN :: Unable To Set VLANs On UCS 520
Jun 12, 2011I am trying to configure a UCS 520 and need to setup the VLAN for the phones. I tried to use the vlan command from the config prompt and also from the vlan database and each time I get the following message:
UC520(vlan)#apply
% not enough space on flash to store vlan database. trying squeeze...
% error squeezing flash - (Operation not supported on this file)
Error on database apply 40: NV storage failure
Here is what my nvram is showing:
UC520#dir nvram:
Directory of nvram:/
246 -rw- 6461 <no date> startup-config
247 ---- 1933 <no date> private-config
248 -rw- 6461 <no date> underlying-config
1 -rw- 577 <no date> IOS-Self-Sig#1.cer
2 -rw- 0 <no date> ifIndex-table
3 ---- 61 <no date> persistent-data
262144 bytes total (250626 bytes free)
How To Tie The Two Vlans Together
Sep 21, 2012I got my switch running as a router and several vlans running on it. My question is how do i tie the two vlans together so they can communicate? I know this might be a beginner question.
View 1 Replies View RelatedCisco :: How To Create Ipsec Tunnel
May 4, 2011how to create ip sec tunnel using these parameters. customer ip where tunnel has to be connected 1.1.1.1
ISAKMP Parameters: (Phase I)
Encryption: AES-256 or 3DES
Authentication Mode: Pre-shared key
[Code]......
Cisco :: How To Create Dashlet For Uplinks With LMS 4.2
Dec 3, 2012I am having a LAN with 30 switches and . Is it possible to create seperate dashlet/dash board to moniter only the uplink trunk ports of Lan Excluding acces ports with LMS 4.2?
View 1 Replies View RelatedCisco VPN :: Create A VPN Between 2 Host With 2811 And NAT?
Jan 12, 2012I want to create a VPN between two PC's, (the server "Data" and "Remote Desktop" check the topology below), the Router Clabeck (cisco 2811 ) is connected to the internet through int f0/0 using a PPPoE connection and connects all the LAN PC's by PAT to the internet (you can see all the configurations in the Show Run below), the "Remote Desktop" is any PC with internet connection.
F0/1 F0/0
DATA--------------------SW-------------------ROUTER(Cisco 2811)---------------------INTERNET---------------REMOTE DESKTOP
192.168.1.51 192.168.1.254 201.122.53.177 192.168.1.1
Current configuration : 2116 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]....
Cisco VPN :: Create VPN Between ASA5510 And ASR1002
Apr 6, 2013im trying to create a VPN between a Cisco ASA5510 and an ASR1002 when my Loopback interface is The Source IP . [code]
View 1 Replies View RelatedCisco VPN :: 5510 - How To Create ASA / VPN Tunnel
Jun 11, 2013We currently run dual ASA 5510's in A/S config on our main campus. We would like to create a VPN tunnel to a branch campus. Trying to decide between a 5505/5510/5512x, We would like to extend many of the capabilities of our network to the branch campus which will be 20-50 users on a 50mb/10mb internet connection.
Domain login
System Center workstation management
Cisco WCS
Shoretel voip
(Cisco NAC?)
Several different VLANs for wireless guest, student traffic, staff traffic, voip traffic, etc. Which device would be best and should we get the security plus license with it?
Cisco VPN :: Create VTI Tunnel From 877 Router To ASA?
May 13, 2012I woulke like to know is it possible to create a VTI tunnel from my 877 router to my ASA, rather than creating a cryptomap on the router ?
View 1 Replies View RelatedCisco WAN :: Create 2 SVI On 3650 Switch
Apr 15, 2012We are about to move our IT rack to a data centre and will be adding a new Layer 3 (Catalyst 3560) switch beyond our ASA 5510 which will be providing our existing WAN plus another SVI which will be carrying our HSRP range.
I have never configured a switch to use two SVI's before and can't seem to find the relevant docs online.
Cisco :: How To Create Credential Sets In LMS 3.2
Jun 19, 2011I inherited a Ciscoworks installation, and would like to create a credential set for a certain class of device. However, after searching around the interface and documentation, I cannot find instructions on how to add a credential set with certain snmp, ssh, credentials. We use ACS authentication and authorization?
View 1 Replies View RelatedCisco VPN :: ASA 5005 - How To Create VPN Dongle
Jun 27, 2012create a VPN dongle for my office users. I have Cisco ASA 5005 firewall. I want to give them remote access to our intranet but if the user doesn't have the dongle which has the certificate on it he/she can not connect to my office intranet.
View 2 Replies View RelatedCisco Firewall :: ASA 5505 Sec - Can't Create More Than 3 Name
Jul 24, 2012on my Active/Stanby ASA5505 has Sec+ License(trial), I can't create more then 3 nameif interface however,
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Unrestricted
Dual ISPs : Enabled perpetual
VLAN Trunk Ports : 8 perpetual
Inside Hosts : Unlimited 17 days
Failover : Active/Standby 17 days
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled 17 days
AnyConnect Premium Peers : 2 perpetual