Cisco Firewall :: Create Vlans In ASA 5510?
Oct 25, 2011
I need to be able to create vlans in my ASA 5510.
I can'T find anywhere to do this.
I've tried the "routers command" I know, like vlan databse and it does'nt work
Is there a way to "enable" vlan on a ASA 5510 ?
View 3 Replies
ADVERTISEMENT
Feb 5, 2012
I need to create a firewalled segment that not only separates hosts from general population, but also from each other. The solitary confinement of firewalled segments.I know that I could create a bunch of sub-interfaces, one for each host or group that needs to be isolated, but I'd really rather not have to do that if possible. 1) It could become a management nightmare between ACLs and sub-interfaces and 2) it's a waste of IP addresses.s there any way that I can create a bunch of separate VLANs behind the firewall and have them all terminate at the firewall, using a single firewall IP address for the gateway?
VLAN 1 - hosts 1.1.1.5 and 1.1.1.6VLAN 2 - hosts 1.1.1.7
Firewall DMZ Interface - 1.1.1.1VLAN 3 - hosts 1.1.1.8 and 1.1.1.9
This way, the hosts are isolated and can't talk to each other unless they're on the same VLAN.I'm working with an ASA 5510 running 8.2.4(4).
View 1 Replies
View Related
Feb 25, 2013
User want to create on 5 network , 100.x , 200.x , 210.x , 250.x , 220.x .at the ASA5510, no enough port for 5 network.So I want to create 4 vlans on eth 0/3. I can create vlan but i cannot run this command " switchport mode trunk" " "switchport trunk allowed vlan list" how can be done for that?
Actually i want to use like thisASA5510-----4 vlans on eth 0/3------switch----vlan200,vlan210,vlan250,vlan220.
View 1 Replies
View Related
Mar 23, 2013
May I know the reason why we cannot create interface vlan on Cisco ASA 5510?
View 2 Replies
View Related
Sep 8, 2010
Successfully creating a port-forward in ASA5510, ASA version 8.3(1) ASDM6.3(1)?I have spend hours now trying, but I'm still unsuccessful.What I want is a simple: "if this particular ip-adress hits the wan interface on this tcp-port redirect to this inside ip-address on this tcp-port.I have never had any trouble on any other firewall creating something like this, but the ASA is killing me.
View 10 Replies
View Related
Jan 30, 2012
I have recently upgraded my ASA 5510 to 8.3 code and honestly I am confused on the best and most efficient way to do many nat translations through it. I have a group of about 100 IP's that need http/https/and sqlnet allowed through for our web farm.
I have a text file with the real and translated IP addresses and in 8.2 I could simply modify it and dump the thing in and make the NAT rules and access-lists. Now with the new object based model I am having a hard time wrapping my brain around how to do this using as few lines of code as possible.
Do I have to create an network object for each and every IP i want to nat through?
View 1 Replies
View Related
Apr 8, 2013
I am trying to setup intervlan routing with a Cisco ASA 5510 and two 2960-S switches. The 5510 currently is using ASA Version 7.0(2) and has a base license. I tried to create a sub interface today based on some info I found regarding the routing piece and it didn't recognize the command. I'm thinking I may need to update the IOS code or the license on the firewall. I know the syntax was correct because I looked it up and found it in a Cisco document.
View 15 Replies
View Related
Jul 16, 2012
I'd like to create dhcp server pool on ASA 5510. I was wondering how big is the DHCP scope that Cisco ASA 5510 can support? Are there any ASA models which can support up to subnet mask 22 for DHCP scope?
View 7 Replies
View Related
Nov 13, 2011
Unable to create VLAN interfaces in ASA 5510
View 1 Replies
View Related
Mar 4, 2012
I have problem with device cisco srp 521 , my problem is haw to create two VLAN-s first will be to WAN link, second for Management.
View 2 Replies
View Related
Jun 18, 2012
I just want create vlans on switch sge2010p
Scenario:
vlan10
ip address 192.168.10.254/24
vlan20
ipaddress 192.168.20.254/24
vlan10 needs internet.
I have a static ip internet which is 200.33.22.11 gateway: 200.33.22.10 I have a router configured working as gateway, It has ip 192.168.2.1.
I have configured two vlans. But when I try to check if vlan has internet, it doesn't work.
View 2 Replies
View Related
Aug 27, 2012
I need to set up a VLAN. We just bought the SG500x switches and we need to create several VLANs.
So for example:
192.168.1.x --> Vlan 1
192.168.2.x --> Vlan 2
192.168.3.x --> Vlan 3
What I would like to know is how do I come about setting this up and do I have to do something with my DHCP server to allow this to happen?
View 2 Replies
View Related
Jan 13, 2013
I have just purchased Dell PowerConnect 6224? how can i create two VLANs (vlan 10 - 192.168.10.x/24 & vlan 20 - 192.168.20.x/24) that can communicate with each other without setting servers/workstation network gateway point to the vlan ip address?
View 2 Replies
View Related
Jun 1, 2012
WE have to deploy ASA5585 in between User vlans & server vlans. we have to find all the ports that needs to be opened on firewall. any tools to do same.
View 2 Replies
View Related
Mar 12, 2013
is there any specific way to create the SVI Interface on MSFC , actually I need to create the two SVI Int on MSFC to enable routing in between two VLANs on 7613 chassis.
View 2 Replies
View Related
Apr 8, 2013
I used two sf-300 switch and create 4 vlans and intervlan routing is working fine.
Port 1 - 10 -------------> Vlan 1
Port 2 -20----------------> Vlan 2
Port 3 - 30------------------> Vlan 3
Port 4 - 40--------------------> Vlan 4
giga1 -----------------> connected to router (This router used for intervlan routing).
SF-300 Port 1 is connected to Internet Modem. This modem worked as dhcp server also for vlan 1, my problem is that when vlan 1 is not communicate to vlan2,3,4 and 2,3,4 are not communicating.
How i can communicate vlan 1 to 2,3,4 vlan.
how i can connect the modem in switch? Access port or Trunk port ( Presently available in vlan 1 Access port)Any route i need to make? sf-300 or modem or router?
View 1 Replies
View Related
Jun 27, 2012
I am looking for a way to create different routing policies for vlans on a 3750 table.
My set up is
Clients----------- 3750 -------------- ASA ---------------Servers
|
|
|
Internet Routers
What i am trying to do is on the 3750 to route private networks to my ASA on different subintefaces and all internet to my internet routers . Each VLAN has a different GW for the internet. On some case i have the ASA as a default gateway. ASA default default route is 3750 where i need the internet traffic to be spllited on the proper Boarder router.
View 1 Replies
View Related
Feb 12, 2012
i want to create a trunk between 4507 & 3945E router & route two vlans from router 3945E
4507# vlan 99 & 51
# int vlan 99
# ip add 10.22.100.1/24
#int vlan 51
# ip add 10.22.103.1/24
[code].....
4507 version : IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
3945E: 15.1(2)T4 what I am missing?
View 3 Replies
View Related
Jul 19, 2011
I have an ASA5510 with VPN L2L two operand normally. I need to create another VPN L2L. When you add the 3rd VPN always drop one of those that were operating. What can be?
View 2 Replies
View Related
Jun 11, 2013
We currently run dual ASA 5510's in A/S config on our main campus. We would like to create a VPN tunnel to a branch campus. Trying to decide between a 5505/5510/5512x, We would like to extend many of the capabilities of our network to the branch campus which will be 20-50 users on a 50mb/10mb internet connection.
Domain login
System Center workstation management
Cisco WCS
Shoretel voip
(Cisco NAC?)
Several different VLANs for wireless guest, student traffic, staff traffic, voip traffic, etc. Which device would be best and should we get the security plus license with it?
View 4 Replies
View Related
Apr 7, 2011
Last time, i´ve implemented a Remote Access VPN to my network with ASA 5510 I´ve allowed to my VPN an acces to all my Internal LAn But i want to configure a group of vpn in the CLI for have different group of user which can access to different server or different network on my LAN.
Example : informatique group------access to 10.70.5.X Network
Consultor group -------- access to 10.70.10.X Network
I need to know how can i do that , and if you can give me some eg script for complete this Here is my configuration :
ASA Version 8.0(2)!hostname ASA-Vidruldomain-name vidrul-ao.comenable password 8Ry2YjIyt7RRXU24 encryptednamesdns-guard!interface Ethernet0/0 nameif outside security-level 0 ip address X.X.X.X 255.255.255.X!interface Ethernet0/1 nameif inside security-level 100 ip address X.X.X.X 255.255.255.X!interface Ethernet0/2 shutdown no nameif no security-level no ip address!interface Ethernet0/3 shutdown no nameif no security-level no ip address!interface Management0/0 description Port_Device_Management nameif Management security-level 99 ip address X.X.X.X 255.255.255.X management-only!passwd 2KFQnbNIdI.2KYOU encryptedftp mode passivedns server-group DefaultDNS domain-name vidrul-ao.comaccess-list 100 extended
[code]....
View 2 Replies
View Related
Oct 26, 2012
I would like to use a Cisco 1921 at my house and create a "Easy VPN Remote" connection to our ASA 5510 at work. Can I use the Easy VPN Client with the base license, or do I need the security license to take advantage of the VPN tunnel?
View 4 Replies
View Related
Jan 1, 2012
communication between 2 vlans.i have 2 vlans
Vlan 100
ip add 1.1.1.1
!
!
!
Vlan 200
ip add 2.2.2.2
i want to make communication between 2 vlans on firewall 5520 ASA 8.2.
View 1 Replies
View Related
Aug 9, 2012
How to secure vlans on Catalyst 6500 by using Cisco ASA Firewalls?There are no free modules on Catalyst 6500 to install a FWSM module.What is the best configuration to secure vlans (~80 vlans) by using cisco ASA firewalls (context, hairpining...)?
View 1 Replies
View Related
Jul 12, 2012
Our HQ office has an ASA 5510 with full access to internal and external IP's. We have a small group of remote users that are working from a shared office suite and they only have Internet access by way of internal default gateway. Using a VPN client is not desirable due to many other devices requiring access to HQ. Is there a way to create a site-to-site VPN from this remote office space back to HQ (ASA 5510) if they have no access to the public IP address on their end?
View 2 Replies
View Related
Jul 24, 2012
on my Active/Stanby ASA5505 has Sec+ License(trial), I can't create more then 3 nameif interface however,
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Unrestricted
Dual ISPs : Enabled perpetual
VLAN Trunk Ports : 8 perpetual
Inside Hosts : Unlimited 17 days
Failover : Active/Standby 17 days
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled 17 days
AnyConnect Premium Peers : 2 perpetual
View 5 Replies
View Related
Jul 11, 2012
I have a Cisco 5505 with a security plus license and but I can’t seem to create sub interfaces on it.
ASA1(config)# sh ver
Cisco Adaptive Security Appliance Software Version 8.2(2)4Device Manager Version 6.0(3)
Compiled on Wed 03-Feb-10 14:17 by buildersSystem image file is “disk0:/asa822-4-k8.bin”Config file at boot was “startup-config”
ASA1 up 1 day 18 hours
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHzInternal ATA Compact Flash, 128MBBIOS Flash Firmware Hub @ 0xffe00000, 1024KB
[code]....
View 3 Replies
View Related
Feb 29, 2012
I want to create a Dual DMZ in a ASA5510 however it is not like I used to in ASA5505?In ASA5505 I create a Outside, Inside and DMZ VLAN and there after add the interfaces into the VLAN.This way I can have two DMZ interfaces, but how do I do it in a ASA5510?
View 1 Replies
View Related
Jun 12, 2013
I have a production ASA 5505 that is working perfectly. I wanted to take a spare ASA 5505 and copy the running config to it so that I would have a backup unit that could be swapped out if the production unit went down.
Both units have security plus and running 8.2(1). The only difference is that the production ASA has 512MB of RAM while the backup ASA has 256MB. Also the backup has anyconnect and the production unit does not.
I copied the running-config to my tftp server and then copied the running config from my tftp server to the backup ASA as startup-config. After reload the device booted with an identical configuration to my production ASA, but after swapping out the units to test it, I have no access to the WAN or DMZ from my LAN. Swapping back to the production unit and all works as it should.
I printed out the running config from both devices and compared them line by line. They are identical except for the anyconnect line on the backup ASAs config file.
View 5 Replies
View Related
Mar 29, 2013
I am trying to connect 2 VMWARE servers directly to my 5515-X firewall. [code]ASDM will not let me assign the same VLAN to both Gi0/2 and Gi0/3. I dont want to connect my VMWARE servers to a switch first (that just adds one more component that can fail).
View 4 Replies
View Related
May 24, 2012
i am trying to get my ASA 5505 with 2 internal VLANs (voice and data) and external internet VLAN to run in router as a stick, and route between VLANS.
I cant get it working though:
[code]...
View 4 Replies
View Related
Dec 5, 2012
I have an ASA 5505 and I have the three regular vlans, outside, inside and dmz. The best would be only have outside and inside and skip dmz, but without explenation there is not possible to have more then two clients in whats now dmz because of a mac filter on third party device.
So as security is concerned dmz and inside is equal, one to one and there should be full access between them. I ran the wizard and said that the only way traffic not should be possible to flow is from dmz to outside.
In the NAT rules the onle rule is
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
But traffic from one way or the other dmz to inside, og inside to dmz it says in log
3Dec 06 201215:38:39305006172.17.6.1053portmap translation creation failed for udp src inside:192.168.6.102/49358 dst dmz:172.17.6.10/53 From documentation I have an image with network drawing from documentation. What do I have to do allow traffic btween inside and dmz, both ways.
View 3 Replies
View Related
Sep 16, 2012
I have a 5505 with Base license running ASA software v8.4(2) that has been working happily for a while with an inside and an outside VLAN.
The outside has a single statically configured public IP, and I have a number of static NAT rules to expose a few internal servers as well as Dynamic-NAT for all devices on inside to gain access to the Internet... the main bits of the config are below:
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Vlan2
[code]....
I now have a requirement to add a "dmz" VLAN for guests to have access to the Internet using a dedicated wireless AP, but not to any of the inside resources. As the ASA has a base license I have configured "no forward interface" to the inside vlan, which suits the purpose fine
interface Vlan12
description Used only for guests access to the Internet - no access to the corporate resources
no forward interface Vlan1
nameif guests
security-level 20
ip address 192.168.2.1 255.255.255.0
My problem is that when I try to add NATing from the dmz to the outside I get a:
ERROR: Address a.b.c.d overlaps with outside interface address.
ERROR: NAT Policy is not downloaded
with either:
object network guests_subnet
subnet 192.168.2.0 255.255.255.0
nat (guests,outside) dynamic interface
[code]....
Having had a look at the ASA Configuration guides, all the examples I can see with several "internal" VLAN's being NAT'ed use one external IP per VLAN - is this a feature/restriction of the ASA software? Are there any workarounds? Or is the overlap in the error message really about the current NATing to the inside VLAN which is done on the "any" 0.0.0.0 subnet - would the following then work:
object network obj_any
subnet 192.168.1.0 255.255.255.0
nat (inside,outside) dynamic a.b.c.d
object network guests_subnet
subnet 192.168.2.0 255.255.255.0
nat (guests,outside) dynamic a.b.c.d
View 5 Replies
View Related