Cisco Firewall :: ASA 5510 Cannot Create A Interface VLAN

Mar 23, 2013

May I know the reason why we cannot create interface vlan on Cisco ASA 5510?

View 2 Replies


ADVERTISEMENT

Cisco Firewall :: Create VLan On ASA 5510 (8.2)?

Feb 25, 2013

User want to create on 5 network , 100.x , 200.x , 210.x , 250.x , 220.x .at the ASA5510, no enough port for 5 network.So I want to create 4 vlans on eth 0/3. I can create vlan but i cannot run this command " switchport mode trunk"   " "switchport trunk allowed vlan list" how can be done for that?

Actually i want to use like thisASA5510-----4 vlans on eth 0/3------switch----vlan200,vlan210,vlan250,vlan220.

View 1 Replies View Related

Cisco Firewall :: Unable To Create VLAN Interfaces In ASA 5510

Nov 13, 2011

Unable to create VLAN interfaces in ASA 5510

View 1 Replies View Related

Cisco Firewall :: ASA 5510 Same Vlan On Multiple Interface

Jan 13, 2013

Whether it is possible to have same vlan on multiple interface on ASA 5510 and higher models ?

View 2 Replies View Related

Cisco Wireless :: WLC 5508 / Cannot Create Interface As Same Vlan Id And Subnet

Aug 12, 2012

I have got a wireless project with WLC  main office and have 10 sites where ap's are there and ap's getting registerd .we need 4 ssid in all branches same .

ssid guest
ssid scanner
ssid user
vlan 600 main office for scanner 192.168.1.0
in branch
vlan 600 for scanner but ip is 172.16.1.0

and bgp is running . And customer is asking me not to edit the ip range or vlan or create new vlan . but in wlc am not able to create branch network 172.16.1.0 range interface and vlan 600 as vlan 600 i already created for scanner main office 192.168.1.0 So is there a way to do that .
 
Temprarly one site i did like created vlan 610 in branch no ip . And in main office interface vlan 610 given another ip range . and i created interface in wlc . from branch i can connect the ssid and getting ip . But they dont want to create any aditional vlan or another network . Customer dont have a smartnet contract . They recently baught 2 wlc 5508 and 40 ap 1142.

View 4 Replies View Related

Cisco Firewall :: ASA 5585x - Create The Outside Interface On A Subinterface?

Oct 31, 2012

I have a circuit that will be delivered to a client next week and we are installing an ASA 5585x for them. They will have a circuit coming in with a few VLANs configured on it. One VLAN for the Internet and one for connectivity to another client.
 
So does the ASA allow you to create the "outside" interface on a subinterface?

View 2 Replies View Related

Cisco Firewall :: 6509 Core Switch - How To Create DMZ Vlan

Oct 31, 2012

I need to create a DMZ Vlan.  Core switch is a 6509.  FW is an ASA5520.  Need to create a VLAN for DMZ purposes for outside facing servers.  NAT is used on ASA.

View 7 Replies View Related

Cisco Firewall :: Create Vlans In ASA 5510?

Oct 25, 2011

I need to be able to create vlans in my ASA 5510.
 
I can'T find anywhere to do this.
 
I've tried the "routers command" I know, like vlan databse and it does'nt work
 
Is there a way to "enable" vlan on a ASA 5510 ?

View 3 Replies View Related

Cisco Firewall :: How To Create Port Forward In ASA 5510

Sep 8, 2010

Successfully creating a port-forward in ASA5510, ASA version 8.3(1) ASDM6.3(1)?I have spend hours now trying, but I'm still unsuccessful.What I want is a simple: "if this particular ip-adress hits the wan interface on this tcp-port redirect to this inside ip-address on this tcp-port.I have never had any trouble on any other firewall creating something like this, but the ASA is killing me.

View 10 Replies View Related

Cisco Firewall :: 5510 - Create Network Object For IP To NAT Through? 

Jan 30, 2012

I have recently upgraded my ASA 5510 to 8.3 code and honestly I am confused on the best and most efficient way to do many nat translations through it.  I have a group of about 100 IP's that need http/https/and sqlnet allowed through for our web farm.
 
I have a text file with the real and translated IP addresses and in 8.2 I could simply modify it and dump the thing in and make the NAT rules and access-lists.  Now with the new object based model I am having a hard time wrapping my brain around how to do this using as few lines of code as possible.
 
Do I have to create an network object for each and every IP i want to nat through? 

View 1 Replies View Related

Cisco Firewall :: 5510 ASA Cannot Create Sub Interfaces For Intervlan Routing

Apr 8, 2013

I am trying to setup intervlan routing with a Cisco ASA 5510 and two 2960-S switches. The 5510 currently is using ASA Version 7.0(2) and has a base license. I tried to create a sub interface today based on some info I found regarding the routing piece and it didn't recognize the command. I'm thinking I may need to update the IOS code or the license on the firewall. I know the syntax was correct because I looked it up and found it in a Cisco document.

View 15 Replies View Related

Cisco Firewall :: Create Dhcp Server Pool On ASA 5510

Jul 16, 2012

I'd like to create dhcp server pool on ASA 5510. I was wondering how big is the DHCP scope that Cisco ASA 5510 can support? Are there any ASA models which can support up to subnet mask 22 for DHCP scope?

View 7 Replies View Related

Cisco Firewall :: ASA 5505 Creating Interface Vlan In Firewall

May 3, 2011

I have been working with ASA 5510,20,40,80 but not with 5505 this vlan and its interfaces are quite confusing.Just want to know how it works and its connectivity to Cisco Switch.Do i have to put the interface of the switch in the same vlan as i am creating the interface vlan in firewall ?Now the switch port connecting to this Eth1 interface should also be in the same vlan ? i.e vlan3 ?? or it will be in trunk ? The default configuration shows the eth0 with no access vlan and interface eth1 with access vlan 2... does it mean the eth0 is in vlan1 ? (Nativ Vlan ) ???

View 4 Replies View Related

Cisco Switching/Routing :: 3560 Possible To Create Vlan Inside Transport Vlan?

Jan 10, 2012

Between our hosting and a customer we have an extended vlan, traveling on a fiber, between two cisco 3560 switches.The thing is, that we want to create one or more vlans inside that extended vlan, in some way if possible?

View 3 Replies View Related

Cisco Firewall :: Unable To See Interface On ASA 5510 Firewall?

Jul 29, 2012

I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
 
Below is the output.
ciscoasa# sh int ip br Interface                  IP-Address      OK? Method Status                Protocol Ethernet0/0                x.x.x.x           YES CONFIG up                    up Ethernet0/1                x.x.x.x           YES CONFIG up                    up Ethernet0/2                unassigned      YES unset  administratively down down Internal-Control0/0        127.0.1.1       YES unset  up                    up Internal-Data0/0           unassigned      YES unset  up                    up Management0/0              192.168.1.1     YES CONFIG up                    up

View 8 Replies View Related

Cisco Firewall :: 6500 FWSM Vlan Interface

Jan 29, 2012

Is it possible for me to create 2 vlan interfaces on the 6500 and have them both in the same subnet?
 
For a specific customer requirement I would like to have a vlan interface on the 6500 as default gateway, sat in it's own vrf, and then route all traffic inbound and outbound to this vlan through the FWSM interface, preferably in the same subnet. I don't think this will be possible so just looking for confirmation either way.
 
As I will be running EIGRP between a pair of central 6500's and 2 remote offices it will make things much easier for me advertise the connected FWSM interfaces in to EIGRP for access in/out of all my VRF'd subnets. If I need another subnet for each VRF FWSM next hop then I'll have to reditribute a list of statics which I don't really want to do.
 
The reason I am not just using the FWSM as gateway is because I need to run HSRP across 3 different devices (another 6500 in a second suite), and failover FWSM will only give me 1 level of redundancy for those gateways.

View 3 Replies View Related

Cisco Firewall :: ASA 5505 - Unable To Assign IP To DMZ Vlan Interface

Oct 26, 2012

I have ASA  5505 with base license. I created 3rd  vlan on it.it was created. but i am unable to assign IP to it. i assign ip address it takes it. But when i do sh int ip brief it does not show any ip.
 
Code...

View 7 Replies View Related

Cisco Firewall :: ASA 5510 - VPN From DMZ To Outside Interface

Mar 20, 2011

Have an ASA 5510. Setting up a new DMZ zone for wireless and it will only have Internet access. What are the steps so that users on this new DMZ subnet can VPN into the Outside interface on the same ASA?

View 4 Replies View Related

Cisco Firewall :: ASA 5510 Vlan Cannot Reach Wan

May 27, 2012

i'm setting up vlan and inter-vlan routing in my lab. My vlan work well (routing between them and dhcp relay) on the LAN side of the ASA but they cannot reach internet trough the ASA.
  
Here my ASA settings :
 
Note : I know that the physical interface musn't have an @IP but my present network needs one to work. I'll fix this during my next tests.

: Saved
:
ASA Version 8.2(1)
!

[Code].....

View 8 Replies View Related

Cisco Firewall :: ASA 5510 - Static VLAN NAT

Mar 9, 2012

One of our customers has asked us to Nat from the LAN to the Voice LAN based on destination IP address in order to access a public phone server through a vendor managed voice router..
  
                                Internet for everything else
                                                   |
                                                   |
Inside ------------------------> ASA 5510 -----------------> Voice router  ------>  outside to public phone server only
10.10.1.0/20                         10.10.1.7/320               172.16.20.1/24
Voice------------------------->
172.16.20.0/24               172.16.20.254/24
 
Here the ASA5510 has an interface in both networks and the inside network can ping the voice network through the firewall by using non at acls. The phone server can only talk to the 172.16.20.0/24 network. So I need to nat the 10.10.1.0/20 network to the Voice interface on the ASA 172.16.20.254/24.
 
So I think I need the following static but I get the error below:
 
static (Inside,Voice) interface 10.10.0.0 net mask 255.255.240.0
WARNING: All traffic destined to the IP address of the Voice interface is being redirected.
WARNING: Users will not be able to access any service enabled on the Voice interface.
ERROR: Invalid net mask with interface option

[Code] .......

View 5 Replies View Related

Cisco Firewall :: Provide Access To The Management Interface / Vlan On ASA 5505

Jun 8, 2011

I've got an ASA 5505 running 6.3 I've connected the management interface to our management vlan (which contains switch IPs, ilo's etc)Is there a way to allow access to this vlan from another?

View 1 Replies View Related

Cisco Firewall :: ASA 5510 And 3750 VLAN Routing?

Dec 14, 2011

I am working on the exact same configuration as noted here [URL] that uses subinterfaces on the asa. I have two interfaces on my stacked 3750's configured as trunk ports (primary ASA on primary 3750 stack member, secondary ASA on secondary 3750 stack member).
 
My questions is what should the DG be configured on the 3750. Can I keep the 3750 in L2 or will I have to enable L3 routing? Should the VLAN interfaces be configured.
 
The port that the ASA is configured with has 3 subinterfaces on VLAN 100, 200, and 300.
  
The subinterfaces are G0/2.100, G0/2.200, and G0/2.300.I am in the middle of converting from 3 separate DMZ switches, each attached to their own port on the asa which is their default gateway to one physical port on the ASA broken into 3 subinterfaces which then connect to stacked 3750's. The stack will then have the 3 separate DMZs in actual separate VLANs.
 
My goal is to leave the default gateway for each dmz on the ASA so I don't have to modify other areas of the ASA config.

View 1 Replies View Related

Cisco Firewall :: ASA 5510 - Web Interface And SSL VPN Pass Through?

Mar 1, 2011

I have a trouble with Cisco ASA 5510. I configured an SSL VPN with bookmarks to some application. When the users make access to the Web Portal they have to login twice: one for enter in the SSL and one for enter in the application.
 
How to bypass double authentication?

View 1 Replies View Related

Cisco Firewall :: ASA 5510 - Routing Between Interface

Mar 26, 2013

I attached the complete config. The earlier discussion, I cannot select reply. Looks like ACL is denying it. But I am not sure which one or how to permit it.
 
sh run
: Saved
:
ASA Version 8.0(4)

[Code].....

View 7 Replies View Related

Cisco Firewall :: Route To Same Interface On ASA 5510?

Sep 14, 2011

I would like to route traffic that are coming in and going out to the same interface on ASA. I am using inside interface with security-level 100.  In this URL, [URL], ASA is able to do that.

View 5 Replies View Related

Cisco Firewall :: SSH Access On Outside Interface On ASA 5510?

Oct 5, 2012

I need the ssh access on my ASA outside interface and have added
 
ssh ipremoved 255.255.255.255 outside access-list acl_outside extended permit tcp host ipremoved any eq 22 but this is the log i get from ASA
 
Oct 06 2012 16:10:04: %ASA-3-710003: TCP access denied by ACL from ipremoved/39884 to outside:ipremoved/22
 
Cisco Adaptive Security Appliance Software Version 8.2(5) Device Manager Version 6.4(5)

View 7 Replies View Related

Cisco Firewall :: ASA 5510 - Routing Between Interface

Mar 26, 2013

I have a WAN interface and 2 LAN interface. I need both the LAN be able to access a server outside the network via the WAN (outside) interface. I am using a ASA 5510 firewall instead of a router, because I don't have a router. It looks simple enough but it does not work. I ping from the a PC (172.16.22.8) connected to LAN (inside) Network to 10.10.10.1 which is the WAN local interface also did not work. But from the ASA Firewall, I could ping my LAN (inside) PC. I followed a config i get from this forum. However, it did not work. Below my config.

interface Ethernet0/0
nameif outside
security-level 0

[Code]....

View 5 Replies View Related

Cisco Firewall :: ASA 5510 Interface Throughput?

Feb 4, 2013

I'm not clear about the capabilities of the ASA 5510 GigE interfaces (eth0/0 and eth0/1) with an without IPSEC tunnels enabled.
 
This page [URL] shows a figure of 170Mbps 'Maximum 3DES/AES VPN Throughput'. Does that mean per IPSEC tunnel or for the whole interface if it is IPSEC-enabled?

View 3 Replies View Related

Cisco Firewall :: ASA 5510 - Management Interface

Feb 13, 2012

I am having issues with the ASA 5510 management interface. I can't communicate with this interface. It is showing DOWN/DWON even if I type NO SHUT several times.
 
My existing config is as follows 
our-asa-01# sh run
Saved
ASA Version 7.2(5)
hostname our-asa-01
names
dns-guard
interface Ethernet0/0
[code]....

View 5 Replies View Related

Cisco Firewall :: 6509 / Interface VLAN Stop Responding On FWSM Automatically

Aug 8, 2012

i  have been facing strange issue on FWSM (6509 switch). we have created a  vlan inteface for  server farm on fwsm and its stop responding  automatically and we need to give shut/ no shut command under that  interface to back into normal .

View 11 Replies View Related

Cisco Firewall :: VLAN Tagging To ISP Through ASA 5510 To Remote Site

Oct 25, 2012

we have a base license ASA 5510, and been trying to get ICMP working to check that we're routing and not hitting any NAT translation. We have a VLAN280 setup to ISP for VPN link to remote site and another VLAN281 for internet access for internal users.
 
Users can browse internet from (name _inside interface e0/1 access port) which is fine. When I do a ping to remote office through the VPN I get a response pinging from VLAN280 name VPN_Link. When I do a ping from name inside interface I don't get a response both are security level 100 with same-security-traffic permit inter-interface configured.
 
Config:
 
!
interface Ethernet0/0
speed 100
no nameif

[Code]....

View 11 Replies View Related

Cisco Firewall :: ASA 5510 - Terminate Second ISP Link On One Of DMZ Interface?

Jun 20, 2011

On our ASA 5510 we already have one ISP link terminated on outside interface. There is correspoinding nat and global configured for outbound access to internet.
 
Now we need to terminate second ISP link on one of the DMZ interface to have redundancy for the primary ISP. 
 
When primary ISP link or router is down we need to send all the traffic to secondary ISP router.  How do we configure NAT and global for this condition that only when primary is down then only this NAT -Global should be used.  Do we have anything like object tracking associated with the NAT-global.
 
So that as long as Primary  RTR - object is up ASA will use the first NAT-Global pair. When primary ISP is down RTR-Object is not reachable then ASA will perform the second NAT-Global operation.
 
Also can we have default route pointing to Outside interface (primary ISP router) and in case of primary router failure it will point to secondary ISP. Do we have "track"  in the static route commands on ASA.

View 2 Replies View Related

Cisco Firewall :: ASA 5510 Ftp Traffic Passing On 1 Interface But Not Another?

Dec 20, 2011

FTP traffic routed from outside to the inside interface works fine.  I have another interface with multiple sub-interfaces and vlans configured.  FTP traffic routed from the outside to vlan2_servers is not making it through the firewall.  I must be missing something.  I have attached my config.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved