At one of our client premises they have an Cisco 1841 router. We need to connect from outside (other location in another country) with Remote Desktop connection port 3389 to an internal IP address ( a server).From any IP address it have to permit a connection on port 3389 to be forwarded to the server.
View 2 RepliesI configured my Linux server to accept udp port 4669 and 4769. that was easy for me. That's only a small part of the work. I got a remote Cisco Router 1841. I need to allow udp port 4669 and 4769 on the router. traffic passing port 4669 should go to Server0 ( 192.168.XX.XXX) on port 4569 and Traffic passing port 4769 should go to Server1 (192.168.XX.XXX) on port 4569 and should be vice versa. like traffic coming from example server0 using port 4569 should go out on port 4669 to reach my local server.
View 3 Replies View RelatedI'm trying to setup port forwarding to a citrix server but, it seems not to be working.
View 4 Replies View RelatedI want to SSH into a Cisco 1841 router and depending on the suffix added to the SSH (i.e ssh myrouter.myroute.com 2002), would like it to forward this request to a terminal server.Can this be done? If so, how does one accomplish this? I have done something similar with RDP but I was not sure about SSH.
View 3 Replies View RelatedI have issues with port forwarding. I did, but it didn't work. Then I tried different ip addresses. Now I don't know how to delete those configurations, because when I try to overwrite it says already exist. And still port forwarding is not working. I did: ip nat inside source static tcp (ip and port numbers)Our device is 1841, also we have firewall within this router. DHCP is in our 3750.
View 9 Replies View Relatedi need to Forwarding to IP Address 192.168.11.61 [code]
What is the command should i give and how can i apply in my router as per my above mention required ?
I have Cisco ASA 5505 Firewall with security plus license, Currently I open ports on 25,80,443 on public IP address 1.1.1.1 and perform static nat between the inside and outside IP address Such as i configured via CLI
access-list OUT_IN extended permit tcp any host 1.1.1.1 eq 80
access-list OUT_IN extended permit tcp any host 1.1.1.1 eq 443
access-list OUT_IN extended permit tcp any host 1.1.1.1 eq 25
[Code]......
I've just changed my router to a Belkin N+ Wireless Router (F5D8235uk4) My home network is on the 10.0.0.0 ip address range.
I changed the routers IP address to 10.0.0.2 (same as my last one) and the subnet is set to 255.0.0.0
My problem is that whilst my PC's are in the 10.0.0.10 to 10.0.0.20 range my NAS ip is 10.10.10.10 and when I go into the port forwarding (virtual servers) settings on the router it only let's me set the last octet with the first three octets set to 10.0.0. and these can't be changed so I can't port forward to my nas.
Surely the virtual servers should be able to forward to any PC in the subnet, not just those in a 255.255.255.0 subnet? I don't want to change my nas IP address even though that would fix this issue.
I am trying to correctly configure our ASA 5520 and our Mitel Border Gateway in our DMZ. In the documentation for the Mitel border gateway it wants me to set up 2 external IP's on my ASA one to allow 443 traffice into the MBG, and another for 443 traffic that needs to be forwarded to port 4443 for the MGB in the DMZ. My problem is I don't know how to do this. the MBG only has one IP, and I need to have 2 different URL's mapped to two different external IP's both externally using port 443, and one of them forwarding to 4443 on the DMZ interface.
View 10 Replies View RelatedI have a RV120W; configured to perform port forwarding. I have Configured a Port Forwarding and Access Rule
* Sample Firewall: Access Rules:
Action | Service | Status | Connection Type | Source IP | Destination IP
[Code]....
Everything works, but in my destination server, i see as remote address the IP for the RV120W. I want it to forward also the originating IP address of the client (the remote address)
Is it possible to configure this?
I have also configured DMZ for my server, but see same behaviour
Firmware: 1.0.3.10
I need the following ports forwarded for a single ip address Port 88 (UDP)Port 3074 (UDP and TCP)Port 53 (UDP and TCP)Port 80 (TCP) .Is there an easy way to to it with service objects/groups?
View 7 Replies View RelatedWhen I try to set a port for forwarding and set the IP address to forward to:192.168.1.108 (of course, I only type in that last number, 108)I get an error message that the number must be between 1 and 65535. It is! Why am I getting this error message?
View 5 Replies View RelatedI am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.
View 1 Replies View RelatedI would like to setup an cisco ASA 5505 to only allow certain IP's on port 3389, but i can't get it to work. Maybe some of you experts know why?
Here is my config:
ASA Version 8.4(3)!hostname cisco-asaenable password ** encryptedpasswd ** encryptednames!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.253 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address 95.*.*.* 255.255.255.248!ftp mode passiveobject network obj_anysubnet 0.0.0.0 0.0.0.0object network rdpuser-1host 46.*.*.*object network rdpuser-2host 48.*.*.*object network rdp-host-pchost 192.168.1.20object
[code].....
The allowed IP's are setup on user level (rdpuser-1 and rdpuser-2) .Still do, I can't connect to the server from any of these IP's...
we are not able to access port 3389 on host 10.45.4.2 over our vpn connection. vpn is up and running and we can access othet tcp ports on the host but not 3389. hereunder part of the config:
ip http serverno ip http secure-serverip nat inside source route-map SDM_RMAP_1 interface BVI1 overloadip nat inside source static tcp 10.45.4.2 18330 94.229.51.184 18330 route-map SDM_RMAP_2 extendableip nat inside source static tcp 10.45.4.1 3389 213.148.231.156 3389 extendableip nat inside source static tcp 10.45.4.1 5800 213.148.231.156 5800 extendableip nat inside source static tcp 10.45.4.1 5900 213.148.231.156 5900 extendable!access-list 1 remark SDM_ACL Category=16access-list 1 permit 10.45.4.0 0.0.0.255access-list 100 remark SDM_ACL Category=4access-list 100 remark IPSec Ruleaccess-list 100 permit ip 10.45.4.0 0.0.0.255 10.45.1.0 0.0.0.255access-list 101 remark SDM_ACL Category=2access-list 101 remark IPSec Ruleaccess-list 101 deny ip 10.45.4.0 0.0.0.255 10.45.1.0 0.0.0.255access-list 101 permit ip 10.45.4.0 0.0.0.255 anyaccess-list 102 deny ip host 10.45.4.2 10.45.1.0 0.0.0.255access-list 102 permit ip host 10.45.4.2 anyroute-map SDM_RMAP_1 permit 1 match ip address 101!route-map SDM_RMAP_2 permit 1 match ip address 102!!control-plane!bridge 1 protocol ieeebridge 1 route ip
Below is my show run of a Cisco 800 router (Two VLAN's, single WAN) that works fine. Problem is that in this senario port 3389 is open for everyone. Only two remote users are allowed to connect trough port 3389. Let's say WAN IP's : 22.33.44.55 and 66.77.88.99. How would a good access-rule look like to fix it?
no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionservice sequence-numbers!hostname cisco-867!boot-start-markerboot-end-marker!logging buffered 51200logging console criticalenable secret 5 ***!no aaa new-modelmemory-size iomem 10clock timezone GMT 1clock summer-time GMT date Mar 30 2002 1:00 Oct 26 2035 1:59!!no ip source-route!!ip dhcp excluded-address 192.168.10.200 192.168.10.254!ip dhcp pool Vlan2 network 192.168.10.0 255.255.255.0 domain-name dsl.local default-router 192.168.10.254 dns-server 213.144.235.1 213.144.235.2 lease 0 8!!ip cefno ip bootp serverno ip domain lookup!!!archive log config
[Code]....
RDP (port 3389) is not working on D-Link network - is there a setting in the d-link to allow this?
View 4 Replies View Relatedhow to: port forwarding to 2 different destinations based on incoming WAN port
The default HTTP service works fine: TCP80/80-> 192.168.0.55
I have a couple of IP security camera's I'd like to be able to access remotely that also listen on port 80. I tried TCP & UDP 8009/8009-> 192.168.0.9 without any luck. Not sure how to handle the port redirects on the RV042G? Seems simple and was on the Symantec, could be user training :-)
I was able to do port redirect with the Symantec Firewall I'm replacing.
So here is my network.
ASA5505--->Cisco1841--->Cat2960
Code
ASA asa831-k8.bin
Cisco 1841 c1841-adventerprisek9-mz.151-4.M2.bin
Cat 2960 c2960-lanbasek9-mz.122-55.SE1.bin
and here is my dilemma.
I can SSH from the internet to my ASA on default port 22, directly to my public IP. I can SSH from the internet to my Cisco 1841 on port 2001. I can not however, SSH to my Cat 2960. From what i can tell, on the Cat2960 i can't change the default port 22 for SSH to different port, just like i did on the Cisco 1841. I looked to see if I can change the default port for SSH on he ASA, it does not look like this is an option.
The bottom line is that i want to be able to SSH to all three devices from the internet. I only have one public IP. As of now, what i can do is only SSH to the ASA on default port 22 directly to the public IP and Cisco 1841 on port 2001. It appears that changing the default SSH port on Cat 2960 is not an option. It also appears that I can't change the default SSH port on the ASA, if i could, i would and then i should be able to SSH to the Cat 2960 on port 22. No matter what i did on the ASA, it always listens on port 22 for SSH connections.
show asp table socket
TCP 001f549f <<pub IP>>:22 0.0.0.0:* LISTEN
how do i make it listen on different port?
Here is relevent config for SSH for cisco 1841 (port forwarding)
ON ASA
object network ROUTER
host 10.10.1.1
[Code].....
Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23 ?
First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80
I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.
I have a centralized server which I use to access a mass of different services such as mail, dns, VPN, FTP, Kerberos, http and many more. While I am not a massive networking ****, this server setup is like my garage project. To access these services externally to my LAN as far as I understand I would need to configure port forwarding for each service to my server. Unfortunately the control panel for the linksys E4200 only offers about 15 custom port fields for forwarding, and some documentation I have read shows that with it's basic install my server could be using up to 60 ports at once.
Is this router just not suitable for this sort of network. If so I will be very disappointed because I have spent a quarter of the price on netgear routers with more control than this.
I've set up port forwarding from an external port (9000) to an internal port (80) on our SRP541W, and for some reason, it's not working externally. If I access the public address from within the internal network, it works properly.
View 6 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media
Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.
I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
I want to create a Counter Strike Server and need to open some ports for that.The Problem: I cannot seem to open the ports for gaming.The Modem Setup: My Firewall is disabled.My guess is that, this is the area with the problem. I guess my modem is not forwarding onwards.The Problem: I tried checking my ports with websites like URL etc.It cannot access my port.
View 1 Replies View RelatedI have a DSL-524B from D-Link. My problem is, whenever I Port Forward port 80 to my comp's IP to host a web server, all the other computers connected to the router are unable to access the Internet. So, I set up no-ip to use port 8080, but, this exposes my ip and even when masking, if you look at the HTML code, you get the ip.I need to know how to open up port 80 without restricting Internet access to only my comp, or any other work around.
View 7 Replies View RelatedI need to change my mac address / clone another on my network for my internet to work and have been goggling but no answers ?
View 1 Replies View RelatedI'm really bad on networking so I have a question about NAT. I got two public IP addresses from my ISP: 92.x.x.252 - 92.x.x.254. 92.x.x.254 is configured as secondary on external interface and clients will use it two connect (vpn) it from outside through cisco 1841 to zywall p1 with wan ip address 92.x.x.253. Is this configuration (look at picture) allowed? How can I route traffic from 92.x.x.254 to zywall p1, if posible?
View 10 Replies View RelatedAm having an issue with my cisco 1841. I recently brought some IP Publics. Now that i need them i just can't use them, I don't know much about routers but till now have successfully manage to do some stuffs with the router after googling ,OK we already have some other ip publics and when i look at the config file i can see something like this:
View 3 Replies View RelatedI have a 1841 deployed as my NAT device towards internet. NAT is setup so that internal addresses can access WWW. I also have some NAT translations opening speciic ports from outside to inside in the form: ip nat inside source static tcp A.B.C.D 443 A.B.C.D 443 extendable.
Now have an outside address/port setup with a public DNS reference and using NAT from outside to get access to the corresponding inside address. It works when being outside the LAN.
Now to the problem: From the LAN side of the router - i cannot access the public name. I can ping it - but my browser dont find the webserver behind the name. Someone told me it should be setup as "local firewall domain" - and i should set this up as "source NAT".
I finally got my Cisco Pix 501 working on my network and everything is working great! However, I do host game servers on occasion and I have a 24/7 FTP server up and as of now, I can't connect to it because the PIX is blocking the ports!I have zero experience with Cisco, so I need step-by-step instructions on what commands to enter to get this thing working!
View 5 Replies View RelatedI am very confused now. I got my 5505 for home (basic) and loaded up 8.4(1) fresh. From the inside interface I can reach the internet no problem but I am having issues trying to get my port forwarding to work with torrent. inside host is 10.100.130.5 port is 26883, I have been trying to configure this forever.
View 9 Replies View RelatedI finally got my Cisco Pix 501 working on my network and everything is working great! However, I do host game servers on occasion and I have a 24/7 FTP server up and as of now, I can't connect to it because the PIX is blocking the ports!
View 12 Replies View Related