D-Link DIR-655 :: RDP (port 3389) Is Not Working On Network?
Jul 12, 2011RDP (port 3389) is not working on D-Link network - is there a setting in the d-link to allow this?
View 4 Replies
ADVERTISEMENT
Cisco WAN :: 1841 - How To Set 3389 Port Forwarding From Wan To Lan Address
Nov 3, 2011At one of our client premises they have an Cisco 1841 router. We need to connect from outside (other location in another country) with Remote Desktop connection port 3389 to an internal IP address ( a server).From any IP address it have to permit a connection on port 3389 to be forwarded to the server.
View 2 Replies View RelatedCisco Firewall :: 3389 Port Allowed From Some IPs On ASA 5505?
May 6, 2012I would like to setup an cisco ASA 5505 to only allow certain IP's on port 3389, but i can't get it to work. Maybe some of you experts know why?
Here is my config:
ASA Version 8.4(3)!hostname cisco-asaenable password ** encryptedpasswd ** encryptednames!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.253 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address 95.*.*.* 255.255.255.248!ftp mode passiveobject network obj_anysubnet 0.0.0.0 0.0.0.0object network rdpuser-1host 46.*.*.*object network rdpuser-2host 48.*.*.*object network rdp-host-pchost 192.168.1.20object
[code].....
The allowed IP's are setup on user level (rdpuser-1 and rdpuser-2) .Still do, I can't connect to the server from any of these IP's...
Cisco Firewall :: Unable To Access Port 3389 Over Vpn?
May 15, 2011we are not able to access port 3389 on host 10.45.4.2 over our vpn connection. vpn is up and running and we can access othet tcp ports on the host but not 3389. hereunder part of the config:
ip http serverno ip http secure-serverip nat inside source route-map SDM_RMAP_1 interface BVI1 overloadip nat inside source static tcp 10.45.4.2 18330 94.229.51.184 18330 route-map SDM_RMAP_2 extendableip nat inside source static tcp 10.45.4.1 3389 213.148.231.156 3389 extendableip nat inside source static tcp 10.45.4.1 5800 213.148.231.156 5800 extendableip nat inside source static tcp 10.45.4.1 5900 213.148.231.156 5900 extendable!access-list 1 remark SDM_ACL Category=16access-list 1 permit 10.45.4.0 0.0.0.255access-list 100 remark SDM_ACL Category=4access-list 100 remark IPSec Ruleaccess-list 100 permit ip 10.45.4.0 0.0.0.255 10.45.1.0 0.0.0.255access-list 101 remark SDM_ACL Category=2access-list 101 remark IPSec Ruleaccess-list 101 deny ip 10.45.4.0 0.0.0.255 10.45.1.0 0.0.0.255access-list 101 permit ip 10.45.4.0 0.0.0.255 anyaccess-list 102 deny ip host 10.45.4.2 10.45.1.0 0.0.0.255access-list 102 permit ip host 10.45.4.2 anyroute-map SDM_RMAP_1 permit 1 match ip address 101!route-map SDM_RMAP_2 permit 1 match ip address 102!!control-plane!bridge 1 protocol ieeebridge 1 route ip
Cisco WAN :: 800 Router - Permit Some IP To Connect Over Port 3389?
Apr 22, 2011Below is my show run of a Cisco 800 router (Two VLAN's, single WAN) that works fine. Problem is that in this senario port 3389 is open for everyone. Only two remote users are allowed to connect trough port 3389. Let's say WAN IP's : 22.33.44.55 and 66.77.88.99. How would a good access-rule look like to fix it?
no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionservice sequence-numbers!hostname cisco-867!boot-start-markerboot-end-marker!logging buffered 51200logging console criticalenable secret 5 ***!no aaa new-modelmemory-size iomem 10clock timezone GMT 1clock summer-time GMT date Mar 30 2002 1:00 Oct 26 2035 1:59!!no ip source-route!!ip dhcp excluded-address 192.168.10.200 192.168.10.254!ip dhcp pool Vlan2 network 192.168.10.0 255.255.255.0 domain-name dsl.local default-router 192.168.10.254 dns-server 213.144.235.1 213.144.235.2 lease 0 8!!ip cefno ip bootp serverno ip domain lookup!!!archive log config
[Code]....
D-Link DIR-655 :: WAN Port Is Not Working?
May 19, 2011Recently, something weird occurred. My Motorola Surfboard cable modem (on PenTeleData/Service Electric) and my D-Link DIR-655 don't seem to be getting along.If I plug a network cable directly from the modem into a computer, it works fine. However, if I go from the modem to the router's WAN port, it doesn't seem to want to connect to the router at all (no matter what DNS settings I change on the router (including spoofing the MAC address of a working computer) or which network cables I use; the "activity" light on both the router and the modem remain off).Also, if I take a network cable and plug one end in one of the LAN ports on the router and the other end in the WAN port, it works (well, the "internet" activity light on the front of the router comes on and the status page at http://192.168.0.1/Status/Device_Info.shtml says "Cable Status: Connected; Network Status: Incorrectly configured - check logs" instead of "Cable Status: Disconnected; Network Status: Disconnected").
View 11 Replies View RelatedD-Link DIR-655 :: Could Not Get Port Forwarding Working
Feb 11, 2011I setup port forwarding for many router before, but I couldn't get this one to work.I triple check all of my configuration, they all setup correctly. But the port/ports on the router is not open.
View 1 Replies View Related3389 / Taskbar Disappears Over Remote Desktop Connection When Outside Local Network
Oct 28, 2012I've got a machine on my home network running Windows Server 2012 (Based on Win8).The problem is, my taskbar disappears completely.When I minimize an application rather than minimize to the taskbar it simply closes the window as small as it can as if the taskbar never existed (see photos at bottom).
The problem first presented itself after I accessed the computer from outside my local network I'm using a Linksys router and mapping to the server IP, port 3389.After a restart the problem goes away, I will update when I have more information on how frequently or what may trigger.
D-Link DIR-655 :: None Of Port Forwarding Settings Are Working At All On Router
Nov 30, 2012None of the port forwarding settings are working at all on my router. I have just a couple very simple settings. One of them is just an IP camera. I input the name, the TCP port, the computer (IP address) and that's it. This works just fine with my other Netgear router, but with this router, NADA. The router has the latest version of the firmware applied. Just applied it. Hardware version B. Firmware version: 2.10NA. If so, then I really need my money back since it is a main function of a router and it should work. Can't return it now, since I bought it several months ago. Never knew port forwarding didn't work because I never needed it until now.
View 6 Replies View RelatedD-Link DIR-655 :: Stopped Working After Port Forwarding Configuration?
Mar 3, 2011I was changing the port forwarding configuration when suddenly the router stopped working, and now the "D-Link" light is constantly on, and the power light and the 4 LAN lights are flashing. Nothing worked, resetting, or unplug and plug again in a short time.
I disconnected it for 12 hours, and when I plugged in again, it kinda worked, and the settings where factory defaults, so when I tried to connect it to DSL via PPoE, when ( I believe ) it reboots to accept the changes, it starting flashing again and completely stopped working.
So I waited 12 hours more unplugged, plugged it and it worked, and the setting from 12 hours earlier were still there. But when trying to connect to the DSL it stopped working AGAIN.
Now I don't know what to do. I guess I am going to keep trying connecting with little differences, until something.
I believe it still has warranty but since the is no official service in Uruguay, it isn't economically viable to send it overseas.
I am currently connected directly to the DSL, sharing connection to other computers through a switch and hosting an ad-hoc wireless network, but the performance is terrible and the wireless range is minimal.
D-Link D-ViewCam :: DCS-2132L No Longer Accessible - Port 80 Not Working
Mar 17, 2013Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
TP-Link ADSL2+ Wireless :: TD-W8968 Remote Management Port Is Not Working?
Feb 25, 2013Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM
The Remote Management Port is not working correctly. For whatever port I set, it will uses port 80 to access.
TP-Link ADSL2+ Wireless :: TD-W8961NB Port Forwarding (voip) Not Working
Jan 8, 2013Region : Greece
Model : TD-W8961NB
Hardware Version : V2
Firmware Version : 2.0.0 120823
ISP : otenet
The problem is that the voip is not working. I have 2 offices with adsl connection. A is the central office and B is the branch office. The installation is old with deferent ADSL modem-router(Zyxel). The zyxel at the A office was damaged so i had to change it with Tp-link. The potology with ip and cables is the same. I tested the port forward for voip (port 1720) with telnet from outside of the office and responds correct. When i try to call from the A office to B office it seems that i can not connect. When i call from B office to A office the phone is ringing and i can not hear office B but office B hear office A. When i use the old modem router at the office A everything is working fine but the modem-router works just for a while so i have to change it. I closed the firewall but the problem is still the same. I talked with the local distributor and they tolded me that i have to correct the configuration. At the interface setup is chosen the dynamic at the section get ip and not static as i should do. The is a problem there. The configuration asks me the subnet mask and gateway. I do not know the subnet mask and either the local distributor and the local internet provider cannot assist. The internet provider told me to use at the subnet mask 255.255.255.240 and at the gateway the ip of the router. I did that but when i did i lost the internet connection. I have to mention that i make some other port forwards to my SBS2003 server and like remote desktop, vpn connections and https that works fine. The only prolbem is with the vpn port forwarding.
Home Network :: Port Forwarding Not Working?
Feb 20, 2013I want to setup port forwarding in my office router so that i can access my lan computer (192.168.0.122) from any where in the world through (remote desktop connection)I have (D-Link (DIR-615)) router. I went to virtual server option. then i select application name as Remote desktop then public port as (3389), protocol (both), Schedule (Always).My lan computer ip address (192.168.0.122), private port (same 3389), inbound filter (allow all). then i clicked save settings. Then the router took 20 seconds to save. then i close the browser.Then i asked my brother to connect through remote desktop connection who is on the skype and he is in different country and that time he is in office. So he put my router public ip address (xxx.xxx.xxx.xxx:3389) in this format but unable to connect.
View 2 Replies View RelatedD-Link DIR-655 :: Network Monitor Widget Not Working With Rev B?
Jun 9, 2011the Dlink Network Monitoring widget just shows: IP Address error?I'm on DIR-655 Rev_B hardware and 2.01 firmware.
View 1 Replies View RelatedD-Link DIR-655 :: Wireless Network And Internet Not Working
Nov 13, 2012I bought the DIR-655 last year and till within warranty. Yesterday, I lost the wireless network on my laptops but internet was working. I contacted the d-link support and during the process of troubleshooting the problem, the internet connection was also lost. I followed all instructions given to me by d-link teams that spoke with me but the problem was not resolved. I tried to call the d-link support but my calls were ignored . Up till now, the wireless and internet connections through DIR-655 are not working.
View 5 Replies View RelatedD-Link DIR-825 :: Accessing USB Port Outside Of Network?
Aug 22, 2012If possible I would like to have access to my external hard drive from outside of my network.While in the network my laptop connects to the Hard Drive using the shareport. If I take the laptop with me then I would also have to take the External Drive with me.
View 6 Replies View RelatedD-Link DIR-655 :: Network Stops Working For Wired PC Connections
Jun 20, 2011I have a DIR-655 with both wired and wireless connections. Yesterday, network stopped working on one wired machine while using it to surf the internet and a 2nd wired machine has not worked in 3 weeks after moving it from one room to another. Wireless connections are working fine.
-2 wired systems (Windows 7 and Windows XP), both stopped working
-2 wired Xboxes - working fine
-2 laptops, wireless working fine
-1 smart phone, wireless working fine
I've power cycled my DSL modem and DIR-655 multiple times.Power cycled computer multiple times. Tried Win7 built-in diagnostics.Tried setting up static IPs.Tried filling in preferred DHCP server address.Disabled Windows firewall. [code]
TP-Link 3G/3.75G Router :: TL-MR3220 Not Working On 2G (EDGE) Network?
Dec 30, 2012Region : Poland
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Bite
Router TL-MR3220 works well on 3G network, but is not works 2G (edge) network. 3G network is not suported in my location, only 2G. My modem is Huawei E 173. In location 2G network Router show: 3G/4G USB Modem: Unplugged.
D-Link DIR-601 :: EW-432BRP Not Working With Dish Network IPTV
Jun 6, 2012I purchased IPTV set-top box from Dish Network (which in turn uses NeuLion services). The set top box works out of the box with TrendNet TEW-432BRP, however the set top box seems to reboot every time I try to launch a channel.The set top box is connected to LAN port 2/DLink is configured to reserve IP address for the set-top box based on its MAC address. The set top is also within its own DMZ so that it does not interfere with firewall settings.
View 1 Replies View RelatedD-Link DIR-655 :: Just Stopped Working / Showing In Network Pref?
Oct 16, 2011I was working on the computer and internet just stopped, checked the router and it doesn't show up in air-port pref on my Macbook Pro anymore. It was still on my iPhone, and then a few minutes later disappeared from my iPhones network as well. I've tried hard resetting etc, network name doesn't show up anymore, on ethernet to the modem now but tad uncomfortable sitting on the living room since I have the router and modem in my entertainment center.
All the lights work fine, and it lights up like normal but network went "poof".
Typing in ip of 192.168.0.1 just says google chrome cannot connect to that page. I had to play with my Mac for awhile as it wouldn't connect by ethernet till I figured out I had to uncheck passive FTP from Proxies.
D-Link DCS Network Camera :: 2121 Scheduled Snapshots Not Working?
May 16, 2012So I have bought myself a DCS-2121 with firmware 1.05, 4630. Everything works fine except that the camera does not seem to adhere my settings on the snapshots page. At average, it seems that only one image is sent to my FTP-server regardless of the interval parameters.
View 2 Replies View RelatedD-Link DCS Network Camera :: DCS-2121 - Scheduled Recording Is Not Working
Dec 27, 2010my DCS-2121 :
The scheduled recording or scheduled snapshots is not working. I am running the camera standalone and using the web based configuration, storing the images or avi's on a ftp or samba server.
No matter what i specify, it records when triggered (by motion in my setup). All the other settings like, samba, ftp, video, motion detection, and so on is working fine - but I can't configure it to only record like between 10-16 every day. It records all the time - no matter what I select and what I enter in the schedule scheme.
Home Network :: Open Port On A TP-Link WR491ND
Jul 23, 2011I have tried to open ports, but if I use the [URL], I just get the closed. I have tried to use the Viritual server function, but can`t se to get it open.
On my old, D-Link I also had something cal port forwarding, this is not here. Here is a link to an emulator of the router: [URL]
Wireless D-Link DWA-525 Network Adapter Randomly Stopped Working On Desktop?
Sep 10, 2012The other day I went to a friends house, came back home, booted up my PC, and my wireless network adapter wasn't working. I've tried everything to fix it.It's a D-Link DWA-525 802.11n Wireless PCI netowrk adapter. On device manager it just says 802.11 Wireless LAN Card with a yellow exclamation next to it. And when I check what the error is, it's either error 31 or 52 at different times, depending what I've tried to do to fix it.I tried downloading the driver for it off the D-Link website, nothing happens at all when I install it. I tried taking it out of my computer and plugging it in. I tried enabling it and disabling it on device manager.I noticed one thing, when it's in my computer the green light at the back that says activity next to it isn't on.
View 10 Replies View RelatedD-Link DIR-655 :: After Upgrading To Firmware 1.35 Remote Desktop Not Working On Home Network
Mar 22, 2013I was using Remote Desktop between two home computers hard wired through the router and a switch. Now after upgrading to firmware 1.35 I can't get remote desktop to connect. I get an error that I may not have permission, etc. I have the DIR 655 ver A and am running Windows 7 professional on both computers.
View 5 Replies View RelatedLinksys Wireless Router :: E3000 Ethernet Port 4 And Internet Port Not Working
Jul 3, 2012There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.
View 2 Replies View RelatedTP-Link 300Mbps Wireless :: WR941ND Connect Device Which Only Has LAN Port To Network
Feb 20, 2013Region : Singapore
Model : TL-WR941ND
Hardware Version : V3
I would like to connect a device (dataloger that sends data to a remote server via internet) which only has LAN port to a wireless network on the location. I managed to do this once with WA901ND configured in Client mode (WA901ND acts like a wireless card for this data loger).Does WR941ND support this feature (which feature should I use?) or should I buy WA901ND again?
D-Link DIR-655 :: SBS2008 - Network Filter Blocks LAN Port Access To Admin Page
Oct 16, 2011I'm using my 655 as a WAP, so nothing is connected to the WAN port. Since I run a SBS2008 in my home, I also have the 655's DHCP disabled.If I enable Network Filtering, everything inbound/outbound on the LAN ports works except accessing the Admin page. Even if I put the connecting PC's LAN MAC in the tablet.
View 9 Replies View Related3389 (RDP) Good Way To Get Away From DynDNS
Mar 5, 2012I have a PC attached to a standard 192.168.1.1 router with port forwarding turned on. The PC has an IP of 192.168.1.10 and I have Port 3389 (RDP) on the router forwarded to that PC's internal IP.
I currently have a DynDNS hostname, example.dyndns.org, and I type that into MSTSC (remote desktop) whenever I'm traveling.
But, is there a better way of doing this? The IP of the PC is not static, but it rarely changes. I do have a domain registered with GoDaddy and have full access to DNS records.
Cisco Firewall :: Not Able To See Connections For 3389
Jun 3, 2012192.168.1.10 --> ASA 1-----> ASA 2-------> ASA 3----> server (172.21.16.15)
We have opened 3389 , 80 & 445 ports on all firewalls ( ASA 1, ASA 2, ASA ) for server (172.21.16.15) from (192.168.1.10).We are able to see connection in ASA 1 under show connection for 3389, 445 ,80.
We are not able to see connections in ASA 2 & ASA 3 under show connection for 3389. But we are able to see hits in ACl.
Networking :: RDP Over VPN Or Just RDP Direct Connection 3389
Aug 3, 2011So from a security standpoint... PPTP through Windows RRAS then RDP to the server?,Open port 3389 to the server and rdp direct? would think that having a VPN out front would block people from attempting a connection, but if the VPN username and RDP username are the same, I feel like its about the same.
View 7 Replies View Related3389 Cannot Get Remote Desktop To Work
Jul 29, 2011I have a current issue with my 2008 R2 machine.I cannot get Remote Desktop to work. Client machine is Windows 7 Ultimate, windows firewall on the Server machine is disabled, Telnet to port 3389 works (as in, it doesn't error out it gives me a blank screen), the account I'm trying to login to is the only account on the machine (Administrator). Remote Desktop service is installed and set to allow connections on the less secure mode.
View 19 Replies View Related
