I am having a problem trying to get to my root view. I am trying to set up some views to allow restricted access to one of our routers.I am running C2800NM-ADVIPSERVICESK9-M Version 12.4(20)T as the IOS and have the following AAA entries in my config
View 1 RepliesI am using ACS 5.2 and attempting to authorize users through TACACS to Nexus 5.1 code. I seem to have ACS setup correctly based on documentation I received through here. The problem is that the NX/OS doesnt seem to be operating as expected.
View 2 Replies View RelatedI want to give limited access to our first level support so that they can execute certain basic commands like, port vlan change, access port shut/no-shut on Cisco 6509 and 3750E switches IOS based. I want to restrict them to only few options so they can not make changes to uplink (TenGig) ports and can not issue reload command etc. We do not have TACACS. What is the best way to achieve this?
View 2 Replies View RelatedDoes vpn connection need ISP support. If it does, in which step does ISP give service?
View 6 Replies View RelatedIs there any way to link the Role-based CLI views created in the AAA client to the user created in the ACS 5.2 server? I know that you could do that in ACS 4.2 by using the “cli-view-name” attribute.What I have in mind is to login with some user and that the ACS 5.2 server links this user with a view previously created in the AAA client:This is what I would like to achieve:view configured in the AAA client:parser view DiData secret 5 $1$jPNA$gr9o8gGNmWh9sk8Axbfx91 commands exec include copy running-config ftp commands exec include copy running-config commands exec include copy startup-config ftp commands exec include copy startup-config commands exec include copy commands exec include all show Login to the device using a user created on ACS 5.2 and linked to the above DiData view:
telnet xx.xx.xx.xx
username: cenetacspassword:
Router#?Exec commands: <1-99> Session number to resume copy Copy from one file to another enable Turn on privileged commands exit Exit from the EXEC show Show running system information
Router#
Typing the command "enable view something" is not an option for us.
I'm trying to get user authentication backed off to ACS 5.1, I've got it working but not the way I'd like. This is using the TACACS settings not ACS mode.I've created a local user in CW and assigned it to the correct roles, then created a user in ACS with the same name and a different password and this works fine.My question is can I set the roles on the TACACS server using a shell profile/custom attributes. All the documentation I can find is for ACS v4?
View 15 Replies View RelatedHow does the Internet play a role in data sharing?
View 1 Replies View RelatedI've not found much detail regarding election of a root port other than "The root port is the switch port with the lowest path cost to the root bridge" they also expand on this a bit more for the case below, (italics)." When there are two switch ports that have the same path cost to the root bridge and both are the lowest path costs on the switch, the switch needs to determine which switch port is the root port. The switch uses the customizable port priority value, or the lowest port ID if both port priority values are the same".They explain that on S2, F0/1 is root port because it's lower than F0/2 but don't go beyond this.My understanding is that the following order is true with regards to priority of criteria (in this case), am I right?:
1. Lowest cumulative path cost back to the root bridge
2. In case of tie, the device with lowest Bridge ID
3. In case of tie, the port with the lowest received priority #
4. In case of tie, the port with the lowest local ID #
So, shouldn't this demonstration factor in the BIDs of S3 and S4 before the port priority and IDs of S2 ? For instance, if the BID of S3 was lower than that of S4, wouldn't F0/2 on S2 become the root port? I'm hoping I'm correct in this? Also I've not actually seen these four bullets in any of my official material for STP which I thought was a bit odd. I wondering if anyone else who has seen this before, considered the bridge ID aspect.
I've got a UCS210 with about 8 VMs running on it (SBS2008, and a bunch of other 2003/2008 servers).Currently its hooked up to a unmanaged 3com gigabit switch and I'm only using a single Gb ethernet interface.I'm implementing a whole small business pro infrastructure internally here, and this will probably the the first a several hopefully easy questions.
What smartport role do I need to assign to the port that I'm hooking this box up to? Also, is there any type of trunking/load balancing I could do with the dual NICs built into the UCS to the ESW? Any general best practices info for integrating VMs into a cisco SB pro networ.
we are using single cisco 3845 gateway as Ingress as well as vxml gateway . Can you provide any documentation regarding the call volume capacity this gateway can handle. We have deployed this gateway in a UCCE parent- child model.
View 2 Replies View RelatedI know that in small networks, one of the computers is elected the Master Browser role, and elections are held every now and then. In domain networks that implement Active Directory, is there still a Master Browser role, or do the domain controllers take over this role?
View 1 Replies View RelatedLogin to N5k is managed centrally from a cisco ACS server ver 5.2
Goal: Role base access for (1) Network Admin and (2) Storage admin in such a way that network guy and storage guy has controll on their seperate domain.
my customer has FreeRadius, and I'm trying to get the server to assign a network admin role to a 5K running 5.0.3 code.This is based on the example given in this document: url...The server authenticates the user name, but will only put the user into the network operator role. This is confirmed by checking the output of show user-account and debug security user-db.The Radius test using the same credentials passes the authentication test. I'm sure the problem is that the N5K dosent understand the VSA format of the attribute, and that this is a simple syntax problem.
View 2 Replies View RelatedHow do I...add a dos based computer to a network running windows 2003
View 1 Replies View RelatedIs it possible to log when a user connects/disconnects their VPN session? They are connecting to an asa 5510.
View 5 Replies View Relatedi am planning to buy 867vae router and i would like to ask you a few things the configuration is through cli only(because i am not familiar with cli) or it can be web based ? the basic configuration for dsl and routing are preconfigured or i have to do everything from scratchf? if someome has configured let say a draytek router, is it the same with this router or its a different world?
View 9 Replies View RelatedI have been configuring anyconnect VPN. The requirement from customer is to configure MAC address based authentication for anyconnect clients. I have gone through various cisco documents. I couldnot find this option explained. Is MAC address based authentication possible in anyconnect vpn without having AAA server in place?There is an option to select end point attribute as MAC address, while creating Dynamic access policies. But at the host scan configuration of Cisco secure desktop, there are no options for performing MAC retrieval.
My ASA is running on version 8.2(1) and ASDM version 6.3(1) and a memory of 512 MB RAM. Any way for MAC based authentication in cisco anyconnect VPN.
How can I configure police-based nat to allow ICMP-only traffic on asaos 8.4.1 or 8.3?On 8.3 it was very simple:global (outside) 1 interface ,access-list outside_nat_outbound extended permit icmp any any,nat (outside) 1 access-list outside_nat_outbound.
View 10 Replies View RelatedWe are testing the use of a web based tn3270 emulator through our ASA5510 SSL VPN appliance. We have it configured to use clientless SSL VPN. Access to the 3270 session works internally, however when we connect to the SSL session, the session does not load. Each application that we are testing uses activex components that are downloaded to each connecting client. Are there settings that need to be addressed to allow for the downloading of ActiveX components. Also, one of the 3270 applications uses java instead of ActiveX and this app is having the same problem. working with web base tn3270 emulators functioning over ASA SSL VPNs?
View 1 Replies View RelatedIt has been know to all of us that ASA is the great device for creating SSL VPN web portals and the ability to publish several plugins. My interest is about IOS based SSL VPN. Is there anyway to publish RDP plugin into the portal built with 1841 router?
View 1 Replies View Relatedwhat web-based programs do i need to install a 887VA? I tried Cisco CP express version 2.1, not a supported device.
View 2 Replies View RelatedI want to apply QoS policy on a particular VM for specified port range only. I have created following script file but that doesnt work. I mean it doesnt apply any policy on vm residing on Veth1.
config t
ip access-list acl_in
101 deny tcp any any eq 443
exit
[Code].....
I'm having an issue with a Linksys RVS4000 which doesn't appear to be behaving as I think it should.I need to forward a port (Single Port Forwarding) through to an internal NAT host. However, I only want that host/port to be accessible from one host on the internet, for security reasons.
I have created the port forwarding entry and this works fine. I then created two rules in IP Based ACL - one to block all access to that port from the WAN interface and one to allow access from a single host.
However, it appears that when a port forwarding entry is added, it will completely bypass the ACL and allow all traffic for that port/host by default.Is this the correct behaviour?
Firmware version is v1.2.11
is it possible to use the asa dhcp server function to assign based on mac address (yet)? I have read numerous places that it was not possible (as of 8.2) at least, but I am workin in 8.4. I should have mentioned that I've already tried commands (asa 5510 btw)
View 4 Replies View RelatedI'm having a few problems at the moment with a zone based firewall setup. The more I looked into the problems the more I question whether I need the ZBF or not.My network is pretty simple. 1 Internet connection and 1 LAN interface and a few site to site vpns to the router.So what do people think to having this kind of set up and not using a ZBF?
View 11 Replies View RelatedI am configuring a new ACS 5.3 system. Part of the rules is that I want to match the users specific AD group membership, and match appropriatly to an identity group.What i'm trying to do is say that if the user is a member of the AD Group (G-CRP-SEC-ENG) then associate them with the Identity Group SEC-ENG. The under the access service, authorization portion, i assign shell profiles and command sets based on Identity Group.It seems that the ACS server will not match the AD Group for the user, and it will match the Default of teh Group Mapping portion of the policy every time.
I tried several configuration choices from : AD1:ExternalGroups contains any <string showing in AD>, AD1:memberOf <group>.Is there something special i need to do in the Group Mapping Policy to get it to match and active directory group and result in assigning the host to an Identity Group?
I have a Cisco 2851 (with a 4 port switch module) that I am trying to set up with two different internet connections, and have it route traffic out to them based on the source IP. One connection is a 50mb Comcast connection, another is our T1 that our servers are hosted on. The goal is to guide server/phone system traffic to the T1 and have the rest default to the Comcast. I currently have the 2851 connected to our Layer 3 switch (Dell Powerconnect 6224) with a subnet created between them. Static routes have been created on the 2851 back to all of our existing subnets. Traffic flows internally without a problem between the subnets and 2851 (and vice versa). I set up the 2851 with route-map's in the NAT to control the flow of traffic, with the default route set to the Comcast connection. Default route works great, speedtest shows full speeds and everything looks great. The problem happens when I apply my route-map policy to the internal LAN interface with the ACL list of IP's that I want to guide to the T1 (with a next-hop of the T1's IP address). I tested some tracert's and pings from one of the IP's in this list and they would stop at the T1 modem and not go any further. I did a "show ip nat translations" and noticed that the "outside" portion (right half) was blank for every IP that was in the ACL or related to the T1. So my guess is it looks like this is not doing NAT for the T1? I double-checked that I had my "ip nat inside" on the LAN interface and "ip nat ouside" on the T1 VLAN interface and Comcast interface and they were there.
View 6 Replies View RelatedI have setup a basic PBR config to route Http and Https out of a different interface (fa0/0/0) but for some reason http traffic is still going out of the Gi0/1 interface.
Config attached minus the crypto stuff and the publics have been changed.
Is Cisco 3945 router support URL based filtering . For example to block website [URL] but not the main site [URL].
View 1 Replies View RelatedLast night I had a crack at setting up PBR on my companies Cisco 1811.Joy, I thought, it's actually working. Alas I was wrong, the addresses were getting translated to our ADSLs external ip address but routed over our EFM.What I want to acheive is to send all HTTP(s) traffic from our workstations over the ADSL (FastEthernet1) whilst all other traffic and VPN goes out over our Bonded ADSL (FastEthernet0). There is also a minor failover in place for traffic routed to the ADSL in the route-map PBR_VLAN1. The servers are on IPs 200, 202, 204 and 240.
Anyway, I have re-written the configuration and xxx'd and x.a/b/c'd all the IP addresses I want to keep secret. Need to make sure that the PBR is correct, and will do what I want it to? I have a very small time-frame to get this correct and I dont want to fudge the bucket so to speak.
I currently have a asa 5500. is there a way to authenticate based on mac address throught the vpn client. We are haveing problems with useres using there home computers to connect. Yes they are smart enought to install the client and copy the profile.
View 1 Replies View RelatedI want to buy an AIR-SAP1602I-E-K9 and I don't know if I can configure a MAC-BASED ACL with this AP, because I must permit the access of the wireless netwok only to determined wireless devices.
View 4 Replies View Related1)is there any methods to let LMS 4.2 discover Cisco devices based on specific ip like Loopback address ? coz in my Cisco devices i have more than ip address configured?
View 4 Replies View Related