What Is The Role Of Isp In The Vpn Connection
Dec 14, 2011Does vpn connection need ISP support. If it does, in which step does ISP give service?
View 6 RepliesDoes vpn connection need ISP support. If it does, in which step does ISP give service?
View 6 RepliesHow does the Internet play a role in data sharing?
View 1 Replies View RelatedI am having a problem trying to get to my root view. I am trying to set up some views to allow restricted access to one of our routers.I am running C2800NM-ADVIPSERVICESK9-M Version 12.4(20)T as the IOS and have the following AAA entries in my config
View 1 Replies View RelatedIs there any way to link the Role-based CLI views created in the AAA client to the user created in the ACS 5.2 server? I know that you could do that in ACS 4.2 by using the “cli-view-name” attribute.What I have in mind is to login with some user and that the ACS 5.2 server links this user with a view previously created in the AAA client:This is what I would like to achieve:view configured in the AAA client:parser view DiData secret 5 $1$jPNA$gr9o8gGNmWh9sk8Axbfx91 commands exec include copy running-config ftp commands exec include copy running-config commands exec include copy startup-config ftp commands exec include copy startup-config commands exec include copy commands exec include all show Login to the device using a user created on ACS 5.2 and linked to the above DiData view:
telnet xx.xx.xx.xx
username: cenetacspassword:
Router#?Exec commands: <1-99> Session number to resume copy Copy from one file to another enable Turn on privileged commands exit Exit from the EXEC show Show running system information
Router#
Typing the command "enable view something" is not an option for us.
I am using ACS 5.2 and attempting to authorize users through TACACS to Nexus 5.1 code. I seem to have ACS setup correctly based on documentation I received through here. The problem is that the NX/OS doesnt seem to be operating as expected.
View 2 Replies View RelatedI'm trying to get user authentication backed off to ACS 5.1, I've got it working but not the way I'd like. This is using the TACACS settings not ACS mode.I've created a local user in CW and assigned it to the correct roles, then created a user in ACS with the same name and a different password and this works fine.My question is can I set the roles on the TACACS server using a shell profile/custom attributes. All the documentation I can find is for ACS v4?
View 15 Replies View RelatedI've not found much detail regarding election of a root port other than "The root port is the switch port with the lowest path cost to the root bridge" they also expand on this a bit more for the case below, (italics)." When there are two switch ports that have the same path cost to the root bridge and both are the lowest path costs on the switch, the switch needs to determine which switch port is the root port. The switch uses the customizable port priority value, or the lowest port ID if both port priority values are the same".They explain that on S2, F0/1 is root port because it's lower than F0/2 but don't go beyond this.My understanding is that the following order is true with regards to priority of criteria (in this case), am I right?:
1. Lowest cumulative path cost back to the root bridge
2. In case of tie, the device with lowest Bridge ID
3. In case of tie, the port with the lowest received priority #
4. In case of tie, the port with the lowest local ID #
So, shouldn't this demonstration factor in the BIDs of S3 and S4 before the port priority and IDs of S2 ? For instance, if the BID of S3 was lower than that of S4, wouldn't F0/2 on S2 become the root port? I'm hoping I'm correct in this? Also I've not actually seen these four bullets in any of my official material for STP which I thought was a bit odd. I wondering if anyone else who has seen this before, considered the bridge ID aspect.
I've got a UCS210 with about 8 VMs running on it (SBS2008, and a bunch of other 2003/2008 servers).Currently its hooked up to a unmanaged 3com gigabit switch and I'm only using a single Gb ethernet interface.I'm implementing a whole small business pro infrastructure internally here, and this will probably the the first a several hopefully easy questions.
What smartport role do I need to assign to the port that I'm hooking this box up to? Also, is there any type of trunking/load balancing I could do with the dual NICs built into the UCS to the ESW? Any general best practices info for integrating VMs into a cisco SB pro networ.
I know that in small networks, one of the computers is elected the Master Browser role, and elections are held every now and then. In domain networks that implement Active Directory, is there still a Master Browser role, or do the domain controllers take over this role?
View 1 Replies View Relatedwe are using single cisco 3845 gateway as Ingress as well as vxml gateway . Can you provide any documentation regarding the call volume capacity this gateway can handle. We have deployed this gateway in a UCCE parent- child model.
View 2 Replies View RelatedI want to give limited access to our first level support so that they can execute certain basic commands like, port vlan change, access port shut/no-shut on Cisco 6509 and 3750E switches IOS based. I want to restrict them to only few options so they can not make changes to uplink (TenGig) ports and can not issue reload command etc. We do not have TACACS. What is the best way to achieve this?
View 2 Replies View RelatedLogin to N5k is managed centrally from a cisco ACS server ver 5.2
Goal: Role base access for (1) Network Admin and (2) Storage admin in such a way that network guy and storage guy has controll on their seperate domain.
my customer has FreeRadius, and I'm trying to get the server to assign a network admin role to a 5K running 5.0.3 code.This is based on the example given in this document: url...The server authenticates the user name, but will only put the user into the network operator role. This is confirmed by checking the output of show user-account and debug security user-db.The Radius test using the same credentials passes the authentication test. I'm sure the problem is that the N5K dosent understand the VSA format of the attribute, and that this is a simple syntax problem.
View 2 Replies View RelatedI have an Acer 7750G, running Windows 7,connected to our home network using a Dynex router. At the moment this is the only laptop in the house that is having problems with connectivity. Starting yesterday, it only connects intermittently. When I run diagnostics, it says the following problems have been fixed but it either solves the problem for a few minutes only or not at all: "Problem with wireless adapter or access point" or "Default gateway is not available".
IPV6 connectivity also shows 'no internet access' and sometimes IPV4 reports no internet. I've unplugged and rebooted the modem and router a few times but that hasn't solved the problem.
Edit: I ran troubleshoot again, and it says the following issue is not fixed: "Wireless Network Connection 2 does not have a valid IP configuration".
I have a Cisco 3725 running IOS 12.3. I have three WAN connections (2 x 100Mb and 1 x 2Mb serial) and I need to replace the 2Mb serial connection with a further 100Mb connection. However, I have not got any spare 100Mb sockets.My plan is to use a switch that supports VLANs, connect the three WAN connections to the switch, each in their own VLAN, then connect the switch to one port on the router, configuring the switch port as a trunk (so that it passes all three VLANs across the link) and configuring the router so that for that single Ethernet interface, it has three subinterfaces each configured for a VLAN that matches the VLAN used for the corresponding WAN connection.
I am a bit rusty on my IOS so I wanted to run this all past the community for feedback. [code] Any thoughts on whether or not that will work? Are there any commands from the original interface configurations that I CANNOT use when moving them to a subinterface? I'm thinking that the speed & duplex commands need to be removed?
We're getting "Connaction Timeout / Connection Failure" error messages several time per day. Here is our setup:
Verizon FiOS Internet (ONT Box) --> Cisco ASA 5505 --> EdgeMarc 4500 Router --> Cisco 300-24G Switch --> Dell PE1950 Servers
From past few months, we keep getting Connection Timeout and Connection Failure error messages in our vendor application which connects to SQL Server 2005. Also Terminal Server 2003 keep disconnecting for every few hours.After several days of troubleshooting, we come to know that this Cisco ASA 5500 is not working properly. When I access the ASDM, it shows several warning messages.I know there is a setting option to configure TimeOut, but is there anyway to test and track the ASA 5500 regarding this Timeout issues?
I have a problem with my computer connections.When I plug in a network cable to access LAN, a wireless Internet connection gets disconnected.When I unplug the cable internet connection through wireless comes up.Some computers can support both connections cable for LAN and wireless for Internet.Other computers do not support both connections.
View 7 Replies View RelatedI just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies View RelatedI am trying to confgure a VPN connection on a Cisco ASA 5505, and I am supposed to translate the inside network from 10.200 76.0 to host 10.1.4.204, and then from that scheme establish a VPN with the host 66.179.80.108 on network 192.168.50.0/24. I was told that this Cisco ASA appliace would be able to translate the network address as a mask in order to make the necessary connection with the other site connection.
View 6 Replies View RelatedI have problem with my Internet connection. Recently my Internet connection often get slow. There are 3 connections on the server running Windows Server 2003. 1st is External, 2nd is Internal and 3rd is VPN (please see attahement). There is nothing to do with External and Internal connections, and everytime the Internet connection get slow, I have to disconnection VPN (connection) and connect it again.
View 5 Replies View RelatedAfter connecting to the internet on my laptop, the internet connection will work great for 10 minutes or less than it slows down drastically or essentially not working at all. If I disconnect and reconnect it will work again but just for a short amount of time. The wireless connection works great on iPod, IPhone, and tablet. Downloaded Kaspersky Antivirus which said it fixed some viruses but internet got worse after that. Tried restoring the computer to factory settings and the internet stays connected for what seem a few minutes longer.
View 3 Replies View RelatedEvery time I boot up my computer, everything will be working fine for about 5 -10 minutes, but after this, all my browsers will lose connection to the Internet. All of them: IE, firefox, chrome, even the steam browser, all of them just lose connection.The weird thing is, my net connection is perfectly fine: I can still play online games, still use online chat services, still open and use programs like utorrent. It's like something is just blocking all my browser connections.When I run a network troubleshooter, it says "your computer appears to be correctly configured, but the device or resource (Microsoft Corporation: Software, Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads) is not responding."I googled this and came across some apparent fixes like flushing and re-registering my dns and restarting my modem, niether of which has worked.In addition, this problem is showing up on two totally separate shared networks and has only affected my computer. Other netwworked devices, like friends/families computers and my iPhone (which I am using to type this) work fine.
View 1 Replies View RelatedMy hp laptop will no longer connect to the internet thru both a wifi connection or cable connection. I've also tried to do a system restore to an earlier date and it will not let mme do this either
View 4 Replies View Relatedso I would like to know if I have a cisco 800 series lets say with interface fa0/0 being my public interface.can I have on this interface an easyvpn connection to a hub and a crypto map xyz connection to another hub?all the tests I've done using gns3 indicate no. when I have both on the same interface only eazyvpn works. when I remove the eazyvpn from the interface then site to site works.I know with a crypto map I can have different tunnels but my question is a crypto map and an eazyvpn on the same outside interface can it work.if yes, do you have a configuration example of the 2 hubs and the spoke?
View 1 Replies View Relatedi have cable internet. and im supposed to get up to 15Mbps. but i only get that on a good day. i average around 10Mbps.but im paying $60 a month for the 15Mbps. i can get at&t u-verse at 18Mbps for $39.95 a month for 12 months. then it goes up to $44. does any one her use U-Verse? and do you think its a better deal then cable?
View 3 Replies View RelatedOur PC and Modem were in storage for several months. When we unpacked and re connected everything, we could not get conected through our 2 wire modem. We have checked cables, brought other machines into the house , and still cannot get a DSL connection. We tried the proxy settings others have posted. I have not had a chance to see if I can ping any internet suppliers, but to me it seems like a problem with the modem itself.I am not very tech savy, but I am able to follow directions, to trouble shoot.Oh yeah called my Internet provider, and they said it was phone line problems, but phone works great. Didn't even walk me through testing the modem.
How to run different different Net connection run in one pC
View 1 Replies View RelatedI need to run a windows hyper terminal program between my POS register which has a serial RJ11 port to my PC db9 male port
View 2 Replies View RelatedI have a firewall behind 2 routers and 1 modem. I set the vpn up in the firewall and not getting a connection. Do I need to set something up in the 2 routers and modem for it to work?
View 5 Replies View RelatedI just got my computer back after a friend removed a few viruses from my HD. My computer won't get internet anymore. It's connected to the internet at 54mbs but there is no packet transfer at all. I've tried winsock commands and netsh commands with no avail.
Details:
OS: Windows XP Service Pack 3
ISP: Comcast
Antivirals: AVG (I run Spybot when I need to)
Case: My home has few laptops and mobile phones connected wireless to the home's Router -> & to cable modem.
Problem: When I turn-on this particular HP's PC and connect to the internet (wireless) - the whole house internet connection becomes intermittent (e.g. OFF / ON). The Internet connection is fine (no problem), if this PC is not connected to the Internet (not connected to ie or google).
Trouble Shoot (without success)
- I have reformatted the PC and scan the PC with Malware in safe mode (no infection).
Ive been having a problem for the past few days that seems to be "unfixable" ,When I googled for it I found somone on this forum had the same problem , but none of the solutions that were listed were able to work for me. ( virus , restore comp , process causing it )The topic im talking about is 2wire Ethernet Light Blinking -Very- Rapidly + other problemsIm having the same exact problem as this guy and have the same modem. The internet will go down , and come back up in like 20seconds or so. Also at times I will experience heavy heavy lag. What I noticed is when the internet goes down , the Ethernet light stops blinking and is turned off , once the light turns green , it starts working again.his problem occures on all the comps in my house , some hooked up via wire and some wireless
View 7 Replies View RelatedI have a new internet connection. It is displaying lights for DSL, PWR, INET, WLAN.I can connect but it always reads the message "No Internet Access"I went to the service provider to get this fixed. And they created bridge mode through LAN so I could connect using a username and password. (create a new connection > broadband ). But I innocently pressed reset button. I don't want to go back to the service provider to setup the bridge mode or ability to connect by a username/password through LAN.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce 8400M GS, 256 Mb
Hard Drives: C: Total - 125633 MB, Free - 9275 MB; D: Total - 102547 MB, Free - 30795 MB; E: Total - 10291 MB, Free - 2701 MB;
Motherboard: Quanta, 30D2
Antivirus: Microsoft Security Essentials, Updated and Enabled