How To Bridge A LAN Connection From 192.168.1.1
Feb 22, 2012
I have a new internet connection. It is displaying lights for DSL, PWR, INET, WLAN.I can connect but it always reads the message "No Internet Access"I went to the service provider to get this fixed. And they created bridge mode through LAN so I could connect using a username and password. (create a new connection > broadband ). But I innocently pressed reset button. I don't want to go back to the service provider to setup the bridge mode or ability to connect by a username/password through LAN.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce 8400M GS, 256 Mb
Hard Drives: C: Total - 125633 MB, Free - 9275 MB; D: Total - 102547 MB, Free - 30795 MB; E: Total - 10291 MB, Free - 2701 MB;
Motherboard: Quanta, 30D2
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 3 Replies
ADVERTISEMENT
May 4, 2011
I already know how to bridge the lan and wifi connection so I can plug in an ethernet cable from the laptop to my desktop and get internet that way, but is there a way to actually turn the laptop into a router when it's connected to the router, wirelessly? I tried using ad hoc but it looks like that only works if I'm directly connected to the router.
View 5 Replies
View Related
Oct 2, 2012
I'm trying to share an internet connection from one laptop to another laptop but not allowed to do this wirelessly. I only have 1 ethernet port in my room. So I was wondering is it possible to plug laptop #1 into the ethernet port then bridge this connection via a usb to lan adapter.
View 1 Replies
View Related
Mar 25, 2013
I have 2 computers. 1 Desktop and 1 Laptop. I have been getting internet on my desktop through a bridge connection via my laptop, which is connected to our modem wirelessly. We have been using Qwest as our internet provider. We just recently upgraded to a 12mb connection. In doing so, we had to set up a new modem. The setup went smooth, and every other computer can connect to it just fine, including my laptop. But here is where the problem lies.So my laptop is connected to the modem (we don't have a router), and my desktop is still connected to my laptop via bridge connection. On my laptop's side, the Wireless Network Connection, Local Area Connection 2 (my desktop), and Network Bridge are all working just fine. However, on my desktop's side, "Local Area Connection" is marked as "Unidentified Network".
I found this site through searching something on google and found someone that seemed to have the exact same problem. I read through it all and tried all the suggestions he was given. For him, his problem was fixed. For me, the same problem still exists. Here is the link to the thread - I have tried uninstalling the ethernet drivers and restarting my computer and i have tried those commands in CMD for the resets and restarted my computer, but they did not work. I have also done a few other things i believe but can't recall exactly what they were.
View 3 Replies
View Related
Jan 25, 2013
I am having trouble with connecting my Xbox 360 to the internet through my laptop using a bridge connection. Everything works absolutely fine, after reading all of the posts in URL,I followed practically the same steps, using my network information instead. The xbox finds the network but the DNS servers cannot resolve the names of the Xbox live servers or Xbox.com.I was wondering if there was a step somewhere I had missed or needs to be changed. I've already gone through the motions of checking the router and everything.
View 1 Replies
View Related
Jul 23, 2011
I am trying to set up a wifi hotspot with my wireless adaptor. The connection between my ipod and the wireless adaptor in my computer seems to be working fine, but it doesn't connect further to the local area connection (ethernet).I tried to bridge the two networks but it doesn't work I get the error message "An unexpected error occurred while configuring the network bridge"[CODE]
View 4 Replies
View Related
Apr 6, 2012
I have a win7 system next to a smart TV. The win7 is connected to my network through wireless. A second port on the win7 is free.
I'd like to connect the smart TV using network cable to the free port, and set up a bridge so that it connects to the home network.
I tried using ICS. It workes only somewhat - I was able to get an IP address on the 192.168.137.x subnet, but the TV failed to connect to the gateway.
I am trying to use bridging to do the same. I configured the free port and the TV manually, to a 10.10.1.x network, and then I bridged the wireless and wired ports on the pc, (I modified the metric of the wireless to be lower than the wired port). This does not work either.
View 1 Replies
View Related
Mar 10, 2011
I am having trouble creating a network bridge between my PC and Blu Ray player via LAN connection. I have done it before, but always run in to problems. I took my computer on vacation and messed up the existing connection and settings. Last time I successfully created the connection, I stumbled upon the answer, but can't remember how I fixed it. I should say that I can create the bridge, but once I do, the wireless internet connection no longer works, and my blu ray player can't connect to the internet either. I have forced compatibility mode on the wireless network via DOS, but no luck. I did the same on the LAN connection just for the heck of it. Still no luck.
View 10 Replies
View Related
May 20, 2012
I have cisco 1310 bridge with IOS version Version 12.3(7)JA5. Sometimes bridges are disconnecting by showing the following error message.
*Mar 1 01:22:21.856: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 003a.99eb.cc00 Reason: Previous authentication no longer valid
*Mar 1 01:22:22.115: %DOT11-4-MAXRETRIES: Packet to client 003a.99eb.cc00 reached max retries, removing the client
[Code]....
Once it is deassossiated, ihave to manually restart the bridges. How can avoid manual restarting so it would automatically associate after some time.
View 14 Replies
View Related
Jul 3, 2011
i want to know suppose i have two internet connection and i want to merge both connection ...one of my friend told mi yes it is possible but you need router ...so is it possible
View 2 Replies
View Related
Jun 20, 2011
I have to use a single network connection to provide LAN / WAN to a computer and an Apple TV.Is it better to use a network bridge or internet connection sharing?One connection is Gigabit and the other is Ethernet. If I use a bridge will it be degraded to 100Mbs?
View 9 Replies
View Related
Dec 29, 2012
can I use a huawei 520b router ro connect wirelessy to xbox
View 1 Replies
View Related
Apr 17, 2011
It took a while but I've had my 1522 running well for several days. However, if I power down and then power up the 1522, it never reconnects. The bridge mode light flashes 5 times, then - nothing.
So, I have to disconnect everything, bring the 1522 back to my main PC, attach it, let it connect properly, then unattach and re-attach at it's use site.
(I'm using a static IP address and a Cisco E3000 router working perfectly with all my other stuff. Firmware v1.31)
View 1 Replies
View Related
Apr 25, 2012
I currently have a DAP1522 in Bridge mode with a DIR655. I am only using the 2.4GHz G mode on my 655. In a few days I will be replacing the 655 with an 825. When I log into the 1522 I don't see any settings for Mode, Frequency or Width (while in Bridge mode). The page for wireless setup is blank except for the "Save Settings" button. When I look at the 655, it appears that the 1522 is connected (bridged) at 2.4 GHz G like I would expect. So, when I install the 825 how do I make it connect at 5GHz N or will that be automatic if my SSID on the N mode of the 825 matches SSID on the 1522?
View 1 Replies
View Related
Jun 15, 2011
Everyone's 2wire works in bridge mode of they follow these steps url...but when i try i get no internet connection nor does it pick up any internet activity. I even input my account and dsl password in the netgear router gateway still no luck.I'm trying to use the netgear router because in my room i only get 2 signals bars and if i switch to the netgear wireless N router the signal strength would be alot better.
View 7 Replies
View Related
Dec 13, 2012
I have been using WAP4401N for almost a year in our office and I’m very happy of this device, never had any problem. So I bought 3 new ones for our customer which supposed to work in configuration below:
Network ----- AP1 –Bridge mode ----- AP2 – Bridge mode -----AP3 – Access Point mode.
Everything was working perfectly fine to the moment than bridge was broken. I can get access to all AP (obviously when connected to proper part of network) however not able to ping from AP2 -> AP1 or opposite so basically no link between AP1 and AP2. After reboot everything is working fine to next time (happens twice in two days). When I go to System Performance can see Connection is enabled but doesn’t work.
I upgraded firmware to latest version (2.0.5.3) but haven’t worked. When I’ve done some research found many users having similar problem with this device and basically they recommend to don’t buy. Unfortunately this is not an option for me as I’ve already purchased them.
View 6 Replies
View Related
Apr 13, 2011
I am trying to bridge internet connection received from my laptop to my desktop with an ethernet cable. Both machines are running win 7.When I try to connect to my local area connection on the desktop most of the time it fails and I'm left with 'Unidentified network' and no internet connection. Sometimes, rarely it does connect properly but I get a notification about there being an IP conflict in the network, but things work as they should.When I diagnose the problem it tells me that "Local Area Connection doesn't have a valid IP configuration"
View 5 Replies
View Related
Apr 21, 2013
I have a brand new DAP-1522 A1 connected to an 802.11n wireless LAN in bridge mode. Running in the 2.4GHz band with WPK-2 and AES security/encryption.Everything runs fine 99% of the time, but once a day or so the wireless LAN connection on the DAP-1522 drops and then takes about two minutes to re-connect. It re-connects and then everything is fine for a day or so until the next dropped wireless connection episode on the DAP-1522. I know my 802.11n wireless network is 100% fine as during the dropped connection to the DAP-1522 I can connect directly to the 802.11n wireless network (running from my gateway/router) using my other computer, no issues.I've seen some posts on this forum that the A1 version of the DAP-1522 hardware is not 100% compatible with the 802.11n network standard and there will be intermittent wireless drops. If this is true, it's just insane. All I can say is I can't believe DLink would allow a product to be sold that won't work properly on 802.11n networks.I check the logs each time I see the dropped wireless connection and all that shows is the following.1) Negotiating connection 2) 4-way handshake success [mac address]There's no message in the logs about why the wireless connection dropped, but I assume it has something to do with re-newing a key for the wireless network as the successful key renewal messages are the only other messages in the log. When the wireless network dropped I don't see the successful key renewal message at the time I should see it.I thought this DAP-1522 would take 15 minutes to configure in bridge mode and then I'd forget about it. Spend too much time on this already, so a bit disappointed with this DAP-1522 and DLink tech support....though when it's connected to the 802.11n wireless LAN it works fine.
View 14 Replies
View Related
May 23, 2013
Can we make a bridge connection between cisco aironet 1400 series and cisco R5005? In Root and Non Root Manner.
View 1 Replies
View Related
May 23, 2013
can we make a bridge connection between cisco aironet 1400 series and cisco R5005?
In Root and Non Root Manner.
View 1 Replies
View Related
Aug 1, 2011
Earlier today I attempted to change the setting on my Westell 6100 modem such that it would simply bridge the connection to my Linksys WRT54GS router, basically involving setting the router to bridge only and turning DHCP off. Now I no longer get an internet connection through my router when previously the connection had worked perfectly fine before. I following the steps of cloning the MAC address to the router and have done the proper resetting steps (computer, them router, then modem) but I simply can't get an internet connection through my router. The process to set up simple bridging from the modem what supposed to end up with the internet light no longer turning on but the light turned back on following one of the resets.
Currently, I can connect to the internet through the modem just fine but I get nothing when I include the router. I'm not sure if there are some other settings I'm supposed to be changing as I can't seem to find anything past what I've already done when researching online. At this point I would just be happy reverting the settings I've changed but I don't know how to access the modem now that DHCP is off.Basically, I'd prefer to be able to get the router working with these new settings but if that proves too difficult (as I've heard it can be when trying to get Westell modems to work with Linksys routers) I'd like to learn how to access the modem and change the settings back to what they were (preferably in as simple terms as possible as I don't particularly understand what a lot of these settings/configurations do).(And a bit of an aside, but I had attempted to do this modem bridging to "fix" perceived internet speed problems. I've been averaging around 300Kbps download rates ever since I've had this internet connection from Verizon when the supposed download rates should be between 1MB and 1.3MB. Doing this modem bridging had been reported to fix some modem/router conflicts and improved connection speeds for some.)
View 5 Replies
View Related
Feb 25, 2013
I use a WUMC710 bridge with desktop PC and a Printer connected to it. When those two devices have been inactive for a while the bridge goes into sleep mode and loses the connection Back to my EA6500. Trying to print something from wireless devices connected to the 6500 elsewhere in the network doesn't "wake up" the bridge. Ihave to unplug the power supply and restart it.
View 2 Replies
View Related
Jan 17, 2012
I'm having a very difficult time getting my WRT54GS to work with my Westell 6100 modem. I've been bouncing around gathering info, and what I've learned is that the goofy way CenturyLink tech support told me to hook up my old wired router (modem line into outgoing (LAN) router port) is because the Westell 6100 is a "smart modem/router". Therefore, when I run the Linksys setup CD, it sees the modem as a router, and won't properly configure. I've also learned that the Westell modem can be "dumbed down" into simply a modem by putting it into "bridge mode", which is where I'm at right now - trying to get it reset to factory defaults and resetting the connection type from PPPoE to Bridge. In the meantime, I also reset the WRT54GS to factory defaults, and now I've got another problem: the router will not allow me to set up encryption. The default setting is "Disabled", and when I click the down arrow and try to make any selection at all (preferred selection is WPA2 Personal), it reverts to Disabled. I've also tried to change the router's IP address to 192.168.2.1 (and alternately to 192.168.1.253), so it won't conflict with the modem's IP, and it freezes up every time I try.
View 2 Replies
View Related
Apr 24, 2012
Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?
View 7 Replies
View Related
May 17, 2012
Telus cell phone usb connection and a Lan ethernet connection, was trying to use windows 7 to bridge the two networks.
View 6 Replies
View Related
Dec 19, 2012
So I have an RV120W as my "main router" but I can't get a wire into the garage to get a couple of computers in there access to the internet / LAN. I have a WCG200 cable gateway at my disposal, with a built in 4port switch and wondered if I can configure it's WLAN to connecto the RV120W SSID and use wireless as my link between my garage network and the rest of the house LAN? WCG200 isn't going to connect at blinding speeds, which I'm ok with, I just wanted to know if it's possible?
View 3 Replies
View Related
Oct 2, 2012
if I want to bridge between 2 VLANs ,can I use IRB like I would use in a router for bridging to ethernet interfaces for example?
Config example:
bridge irb
interface vlan 10
ip address 192.168.10.1 255.255.255.0
bridge-group 1
[code].....
View 10 Replies
View Related
Jun 23, 2012
i am using windows XP and i want to make my laptop spread wifi signal, well, i don't know how to describe, English is not my language,hope you don't mind, some sort of input in wire network, output is wifi, i follow the instruction: Open Start-Run- ncpa.cpl - Enter Right click LAN and Wireless network icons, click Bridge Connections. Appear Network Bridge icon in Network Connections. Right click Wireless Network icon, Properties, click Advanced. Tick "Computer to Computer..." and "Automatically...." then Close. Back to Wireless Network Connection Properties, click Add. + Network name (SSID): abc + Network Authentication: Shared + Untick "The key is provided....." +Type password (5 characters) Click tab Connection, tick "Connect when this...", Done. Open Network Connection, right click Wireless network icon, click View Available Wireless Networks So far so fine, i can see my ad hoc network, but the problem is i can not connect to it, i click that network, click Connect, type the password, then it shows the connecting window in about 4 mins and then disappear and i am back to part "Cick View Available Wireless Networks"
View 14 Replies
View Related
Feb 6, 2012
How to set the WNR2000v3 into Bridge Mode. I can not find instructions on it in the user manual or the NetGear website. And Google.com has turned up not valuable results either.
I have the WRN2000v3 plugged into another router via Ethernet. I basically want to "dumb down' the WNR2000v3 into a basic Ethernet switch.
View 5 Replies
View Related
Jan 2, 2011
how use wrt54g v3 bridge mode
View 2 Replies
View Related
Dec 24, 2011
Can this router be set up as a wireless bridge?
View 1 Replies
View Related
Apr 27, 2011
How do I convert an old WRT 54G 2 to a wireless bridge.
View 1 Replies
View Related
Jan 17, 2011
I need to figure out a network setup for my house between modem connected to one wireless bridge connected to another wireless router connected to wired router.The reason why I decided to make this evil setup is due to insufficient range between my wireless router and desktop pc upstairs. However, in the room next to it I have a very good wireless signal and a possibility to bridge it to wired network installed in my house. But in order to do it I guess I need to bridge that wireless signal via wireless router or bridge to wired network. [code]
View 7 Replies
View Related
