Cisco :: Connection Loss Of 1310 Bridge?

May 20, 2012

I have cisco 1310  bridge  with IOS version  Version 12.3(7)JA5. Sometimes bridges are disconnecting by showing the following error message.

*Mar 1 01:22:21.856: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 003a.99eb.cc00 Reason: Previous authentication no longer valid
*Mar 1 01:22:22.115: %DOT11-4-MAXRETRIES: Packet to client 003a.99eb.cc00 reached max retries, removing the client

[Code]....

Once it is deassossiated, ihave to manually restart the bridges. How can avoid manual restarting so it would automatically associate after some time.

View 14 Replies


ADVERTISEMENT

Cisco Wireless :: Using VLANs With 1310 Bridge

Dec 18, 2012

I am trying to setup a wireless link between two locations, and be able to pass VLANs through the Wireless link.Currently I have two 1310 bridges.I followed the information at url..., but it is only passing VLAN 1 across the link. I cannot figure what the problem is.Both Bridges are running c1310-k9w7-mx.123-8.JEA3. [code]

View 4 Replies View Related

Cisco Wireless :: 1242 And 1310 Bridge?

Apr 18, 2011

Is it possible to make a bridge using a 1242 and a 1310? I have been able to get them to associate together and it appears it will function as a bridge. I have the 12(4) 253 JA IOS for both devices. I would like to use the g antenna on the 1242 for the bridge and the a antenna for wireless clients. The configuration on the web management appears to support bridge root and non root for both devices.

View 2 Replies View Related

Cisco Wireless :: 1310 Bridge Default Gateway

Jan 11, 2012

In  bridged network environment. We have a pair of Cisco 1310 bridges configued betweeen 2 buildings the config on each is simple one as a root bridge the other as non root no spanning tree is running and source route learning is turned off. We had both on in the past. One side of the network has a link out to the internet. About 3 -4 times a day the IP address on the default gateway becomes unreachable i.e cant be pinged. Only a reboot of one or other of the bridges corrects the issue. This happens only during the day when the netwrok is in use. When this happens everything inside the network works fine and everybody can see everybody else. The ISP can see intot eh network and can ping our devices but we cannot see out of the network.

View 0 Replies View Related

Cisco Wireless :: Power Injector For 1310 Bridge

Apr 11, 2013

We have a failed power injector on a 1310 series bridge. Will the "Power Injector LR" from a 1410 series bridge work on the 1310?

View 1 Replies View Related

Cisco Wireless :: 1310 / Unable To Ping Across Bridge?

Jun 17, 2012

I have installed 2 Cisco 1310's, connecting two buildings that are about 1000 yards apart. One access point is connected to an existing 3560 24 port switch, the other access point has a new 3560 24 port switch connected to it. Also installed 4 1240 access point in the newly connected building to the new switch. Issue is my router and existing switches can not ping any devices on the other side of the bridge. They can ping both access points that make the bridge. I consoled the new switch and could ping the existing switches and router, after doing that the other switches and router are now able to ping the new switch. Now my main issue is I have a user using a 7921 phone connected to one of the new 1242's, when he makes a call to a person in the first building they can hear him, however he can not hear them. Our call manager is in another state were I am located. I can call him and vise versa, and we can hear each other. I have went over my configs server times, and doubled check my IOS versions to make sure they are up to date. I will be glad to provide configs upon request.  

View 1 Replies View Related

Cisco Wireless :: 1310 Bridge RG-59 Coax Cables?

May 8, 2007

The RG-59 coax cables that come with the 1310 bridge are only 1 foot long. where I could get longer cables as the power injector is quite a distance away because there are no close power sockets. Instead of installing new power sockets near to the bridge, we wanted to simply run longer coax cables.

View 3 Replies View Related

Cisco :: 1310 Bridge - Transparent To Local WEP Traffic?

Aug 10, 2011

we have a 1310 connecting two buildings networks.inside each building we have a wireless network (Intermec access points).we are implementing WEP on the Intermec AP's.will the cisco 1310 allow the wep traffic without interference? or would i need to modify the 1310 somehow?

View 2 Replies View Related

Cisco Wireless :: Associate Non-root Bridge Model 1310 To Root Bridge Model 1400?

Apr 24, 2012

Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?

View 7 Replies View Related

Cisco Wireless :: Enable AES Encryption On 1310 WLAN Bridge?

Sep 19, 2012

I have requirement to enable the AES encryption on the management VLAN  traffic  between connected root and non root bridges .below is the network setup  .
  
Router<---->SW1 ( main office)--> Root-bridge < ---------->non root-bride------SW2 ( remote end site)
 
Apart from the specific configuration on the wireless bridge is any extra configuration required on the Switch interfaces?

View 1 Replies View Related

Cisco Wireless :: Aironet 1310 Bridge - Cannot Access GUI To Configure

Nov 21, 2011

I have a pair of Aironet 1310's I am needing to bridge. I have used the CLI to configure the BVI1 with the ip address and verified it. I then tried to access the GUI to configure the device via Internet Explorer and it would not provide access. I read that it had to be older versions of IE but my OS will not support older versions. I then downloaded Netsace Navigator 7.01 as indicated, but still did not get access.
 
Then I thought maybe if I can access the GUIvia the IPSU tool but I have Googled the Cisco IPSU and cannot find a downloadable link.

View 3 Replies View Related

Cisco Wireless :: Aironet 1310 Bridge High Retries One Direction

Aug 15, 2011

We are experiencing a high amount of retries in one direction between two 1310 bridges with external yagi antennas.  What would this indicate?  Here is a copy of the linktest:
 
POOR (102% retries)  Time   Strength(dBm)   SNR      SNR          Retries
msec      In     Out    In      Out         In   Out
Sent :5000, Avg   5    - 66    - 64    31       45   Tot:  56  10149

[Code]....

View 2 Replies View Related

Cisco Wireless :: 1310 Point-to-point Bridge In Lightweight Mode?

Apr 24, 2011

how is the 1130 point-to-point bridge work in lighteight mode ?
 
Is this supported on 5508 and on new 2500 series controllers?
 
How does the WCS manage the point-to-point link?
 
I am aware that there is Lightweight software for the 1300 series bridges but never used one so far

View 6 Replies View Related

Cisco Wireless :: Configure 1310 Point-to-point Bridge (AIR-BRI1310G-A-K9-R)

Apr 24, 2011

Configure 1310 point-to-point bridge (AIR-BRI1310G-A-K9-R)

View 3 Replies View Related

Cisco Wireless :: 1310 EOL - Create A Wireless Bridge Between Sites?

Nov 15, 2012

What is replacing the 1310 AP's in order to create a wireless bridge between sites?

View 3 Replies View Related

Cisco Wireless :: Setting Up A Wireless Bridge 1310 With Two APs?

May 8, 2012

I'm setting up a Wireless Bridge 1310 with two APs. The Root Bridge is working fine, but the Non-root Bridge is not working, the radio 0 is not UP (It is in reset mode), bellow the settings of APs and logs Non-root Bridge.
 
AP Root Bridge
dot11 ssid BRIDGE-INTERSITE
authentication open

[Code].....

View 3 Replies View Related

Cisco Wireless :: 1310 Bridges Keep Losing Connection?

Nov 28, 2010

I have two 1310 bridges...one set as root and the other as non-root.For some reason they keep losing connection.  When I reboot the non-root bridge, link is established.Both bridges have an antenna connected with the right connector and they have the setting antenna transmit right antenna receive right
 
logs from root bridge
Nov 29 13:52:53.311: %DOT11-4-MAXRETRIES: Packet to client XXXX.XXXX.XXXX reached max retries, removing the clientNov 29 13:52:53.311: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station XXXX.XXXX.XXXX Reason: Previous authentication no longer validNov 29 13:52:53.568: %DOT11-6-ASSOC: Interface Dot11Radio0, Station Test XXX.XXXX.XXXX Reassociated KEY_MGMT[WPAv2 PSK]Nov 29 13:55:16.260: %DOT11-4-MAXRETRIES: Packet to client XXXX.XXXX.XXXX reached max retries, removing the clientNov 29 13:55:16.260: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station XXXX.XXXX.XXXX Reason: Previous authentication no longer validNov 29 13:55:16.550: %DOT11-4-MAXRETRIES: Packet to client XXXX.XXXX.XXXX reached max retries, removing the clientNov 29 13:55:16.550: Client XXXX.XXXX.XXXX failed: reached maximum retries
 
logs from non-root Nov 29 2010 13:52:55: %DOT11-4-UPLINK_DOWN: Interface Dot11Radio0, parent lost: Received deauthenticate (2) not validNov 29 2010 13:52:55: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down The signal strength is around -84dBm Cisco IOS Software on both bridges is: C1310 Software (C1310-K9W7-M), Version 12.4(10b)JA1, RELEASE SOFTWARE (fc2)

View 12 Replies View Related

Cisco Wireless :: Connection Lost With 1310 Repeater And 1130AG AP?

Jul 19, 2012

I have a Problem with a customer WLAN. The customer has a Aeronet 1130AG AP. Now i should configure a Aironet 1130 Repater for this WLAN. The initial connection from the Repater with the AP is no Problem. But after some time the Repeater lost the connection. On the AP i see following Messages:20Jul 19 19:05:28.061InformationInterface Dot11Radio0, Deauthenticating  Station xxx Reason: Previous authentication no longer valid 21Jul 19 19:05:28.061WarningPacket to client xxx reached max  retries, removing the client 22Jul 19 16:43:59.412InformationInterface Dot11Radio0, Station yyy  Associated to Parent xxx23Jul 19 16:43:57.901InformationInterface Dot11Radio0, Deauthenticating  Station yyy 24Jul 19 16:43:56.536InformationInterface Dot11Radio0, Station yyy  Associated to Parent xxx 25Jul 19 16:43:51.555InformationInterface Dot11Radio0, Station zzz  Associated KEY_MGMT[WPA PSK] 26Jul 19 16:43:29.078InformationInterface Dot11Radio0, Station Repeater01 xxx Associated KEY_MGMT[WPA PSK]  

View 2 Replies View Related

Internet Connection Drops Repeatedly - D-Link WBR-1310

Feb 3, 2012

I have a D-Link WBR-1310 modem and for some reason the internet connection drops every 4-5 minutes and then comes back after 30 seconds.I don't know what the problem is. I tried resetting the modem which didn't work. I tried upgrading the firmware from D-Link's website but it says "The version of setting file is not compatible." for the .bin file.

View 5 Replies View Related

D-link Wireless Router (WBR-1310) Keeps Dropping Connection?

Feb 11, 2012

My D-link wireless router (WBR-1310) keeps dropping my internet/email connection. The little green lights are all flashing intermittently except of the one on the far left which stays on. I will have a connection for a little while/few minutes and then it drops.

View 3 Replies View Related

Dell :: D820 Steps For Setting Up Wireless Connection To D-Link 1310 Router

Jan 7, 2012

I have just started using my D-Link 1310 Router after quite a few years of it laying around.  I managed to get as far as connecting my D820 and my Desktop in a basic Network.   I have Windows XP Home on both the Desktop and Laptop.  The next step I want to accomplish is making the Laptop wireless with my apartment.  When I first had the Router, I of course had Technical Support and my Warranty with Dell was still active, so I was walked through the process and took notes.  The only file I made note of for this step was installing the driver (US) WLAN Card Rev.A12, but there must be something else that enables the WiFi catcher because I don't have any icon in the System Tray and no way to access it. 

I also remember it being necessary to Bridge the Modem and Router, (I believe we did it from the Verizon site).  Though I was told recently that Bridging is not used anymore, now they do a thing called "Double Netting"? 

View 1 Replies View Related

Cabling / Cards :: Slow / Spiking Internet Speeds With Wired Connection Through D-link WBR-1310 Router

Sep 18, 2012

I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.

I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.

Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02

[Code]......

View 2 Replies View Related

Loss Of Internet Connection

Jan 26, 2011

I support a small business with 6 computers(XP) wired networked to a Cisco router and connected to an ADSL WAN. For over a year now they have experienced an overnight loss of Internet connectivity requiring the router to be rebooted almost every morning. We thought it was a fault router so we replaced this with a good Cisco router, but the problem persisted. We got Cisco involved and they monitored it without finding fault, but they replaced it anyway. We also replaced our ISP but all without avail. I use a combination of pc.Any where and Log mein to support them over the web. The strange thing is that I am always able to connect to their system, but when the fault is apparent, I can't get web access to their router internally or externally and they can't get Internet or e-mail access. The router is my DHCP server and each PC is DHCP mapped in it. Cisco have looked at all the settings of the router and they say they are good.

View 2 Replies View Related

Random Connection Loss On Desktop?

Oct 25, 2011

While I am connected to the internet, whether surfing the web or playing a game, I randomly get disconnected with a "No Network Connection" error on the network access icon on my toolbar. However, other computers that are networked (both wireless and wired) do not receive a disturbance in the connection. When I refresh or look for a new connection, I continue to get the same error and the troubleshooting tools fails to find a fix. The only way this seems to fix is rebooting the computer. Sometimes it happens multiple times in a row, but consistently happens between 1-2 times a day.I don't know if this is a coincidence or not, but it seems to happen when I'm doing stuff that could "stress" the connection, like downloading something or running a game while also browsing the web[CODE]

View 10 Replies View Related

Sudden Loss Of Internet Connection

May 12, 2012

While playing the online game League of legends i suddenly lost internet connection. when loading pages some will not connect and I'll get a message saying I'm not connected and should try reloading, refreshing the page usually fixes the problem, occasionally multiple refreshes are necessary. I've never had this problem before and it's rather inconvenient for me as I need internet access for university.

View 1 Replies View Related

Frequent Loss Of Network Connection?

Nov 22, 2011

I keep losing connections to the internet and getting a couple of different messages that the Gateway IP address is invalid. There are times it happens every few minutes and other times I can go for a couple of days without it. Also, we have to have satellite internet which has such an inconsistent speed. Is it the internet speed inconsistency or the 4 year old Belkin N Router?OK, so I tried to copy the information from the CMD window, but I can't get it to work. After I got the information and right clicked and clicked "select all" then what. I couldn't copy it. I can't find my way back to the instructions.

View 3 Replies View Related

Periodic 30 Minutes Connection Loss

Jul 27, 2012

For the past day or so I have been having problems with my internet connection to my PC. It has been working fine for a few hours, then it suddenly goes down for up to 30 minutes, with sporadic (lasting about 30 seconds) reconnection during that 30 minute period.I am pretty certain this is a computer related issue (as opposed to a problem with the modem), as none of the other computers in the household. (Ihave been affected, and neither has the wifi (I have browsed on my phone while the internet on my computer was down, in fact am currently writing this post on the wifi while my computer has no access)My computers specs (Taken from the sys info program when I regained connection for a short while) [code] Steps I have already taken in an attempt to solve this problem

1. Reset modem (turned it off and back on again)
2. Ran most of a virus scan in both macafee and avg (they both got to about 85% and by that point were just scanning steam stuff
3. Talked to a verizon tech, confirmed it is most likely not a modem problem (he didnt know what the problem was however)
4. Changed out the ethernet cable, the new one works no better than the original

Additional note: Earlier today (after these problems had begun) I was downloading the latest version of hamachi from a site soft32.com when I recieved a trojan warning from macafee. I immediatly stopped the download, restarted my computer and began scanning with both AVG and Macafee, neither found anything of note (AVG found something it labeled a hidden directly, I looked it up and it seems harmless)

View 14 Replies View Related

Wireless Connection - Significant Speed Loss

Feb 21, 2012

I have lately been having trouble with the speed of my wireless connection. usually downloads can run at approx max 1.2MB/S i have noticed significant speed drops in my downloads - when i connect to the network it starts off at 130mpbs, but then quicky drops to 12mbps - no settings have been changed recently.

Windows XP
LinkSYS Wireless N Router E1000
Netgear Wireless Repeater

Signal Strength on Repeater is indicated as strong
Signal Strength on Laptop is indicated as Excellent

View 1 Replies View Related

WNDR3700v3 Netgear - Intermittent Loss Of Connection

Jul 17, 2012

I've been having a problem for a while now wherein my internet connection seems to randomly drop for anywhere from ten seconds to a minute, then come back online. It's been doing this over the lifespan of one router, and continued into the life of this new one I have, which is a WNDR3700v3 Netgear.

I called my ISP and they fiddled around with things on my computer, but the issue is still going on. Rather than slog through another three hours with them, does anyone here have any tips for what I might look into for the cause?

View 19 Replies View Related

Encore Router - Packet Loss In The Connection

Apr 21, 2013

My problem is that i have a packet loss of like 2% to 6%, which is a lot considering that i play a lot of Online games, causing lag spikes and net frozes.I will say all the information i can about my pc.My PC hardware hasn't been modified, so the manufactor page ( ) tells what is installed in my pc.About software, i need to find if this problem is software-based, my AV is Microsoft Security Essentials and i use MalwareBytes too.About how im connected, im connected via Wireless to a router. (dunno model, i just know its a encore router)

View 3 Replies View Related

Cisco Firewall :: ASA5505 Ver 8.2.1 Connection Drops And Loss Of Connections

Apr 18, 2011

I just recently purchased a Cisco ASA 5505 ASA ver 8.2. I run a teamspeak server/ssh/dns and domain on the same server on the network. Before I switched to the asa, I have a regular DGL-4100 that ran with no issues. I have noticed that the connections are very unstable and disconnect frequently and when they do they take 1 to 5 minutes to be able to reconnect. I have done some cisco IOS but am fairly new to this. [code]

View 4 Replies View Related

Broadband :: Packet Loss And Slow Connection On Mozilla?

Apr 22, 2011

My internet connection has suddenly turned really slow and pingtest.net tells me I have severe packet loss, which makes sense as nothing will stream or load properly. I'm running Mozilla Firefox (newest version) and have tried all the usual diagnostics and resetting everything?

View 1 Replies View Related

Sudden Loss Of Wireless Connection Linksys E3200?

Oct 31, 2012

My Linksys E3200 has no wireless access to the internet. Wireless devices show they are connecting to the router, but cannot access the internet.

The router had worked fine until suddenly no internet access. Mac network diagnostics show that the connections are correct until the ISP and Internet which show either yellow or red.

The router's homepage shows no changes in configuration. Ethernet connection works fine.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved