Dell :: D820 Steps For Setting Up Wireless Connection To D-Link 1310 Router
Jan 7, 2012
I have just started using my D-Link 1310 Router after quite a few years of it laying around. I managed to get as far as connecting my D820 and my Desktop in a basic Network. I have Windows XP Home on both the Desktop and Laptop. The next step I want to accomplish is making the Laptop wireless with my apartment. When I first had the Router, I of course had Technical Support and my Warranty with Dell was still active, so I was walked through the process and took notes. The only file I made note of for this step was installing the driver (US) WLAN Card Rev.A12, but there must be something else that enables the WiFi catcher because I don't have any icon in the System Tray and no way to access it.
I also remember it being necessary to Bridge the Modem and Router, (I believe we did it from the Verizon site). Though I was told recently that Bridging is not used anymore, now they do a thing called "Double Netting"?
View 1 Replies
ADVERTISEMENT
Dec 12, 2012
The wireless is just beyond my computer's ability to detect. I have a D-Link WBR 1310 Router hooked up to a high gain wireless antenna-yes, clear line of sight. I have no direct access to our community modem or ISP.
View 10 Replies
View Related
May 28, 2012
We have a user using a Latitude D820 running Windows XP. It's a slow machine, but it's been working generally fine up until yesterday, when it started having connection issues.
When connected via an ethernet cable, the laptop can connect to everything on our internal network (fileserver, Exchange, internal websites), but anything outside (Google, other websites) is inaccessible (Internet Explorer cannot display this webpage). External sites will then be accessible after a few minutes, then connectivity will be lost in about another 5 - 15 minutes. This process repeats seemingly endlessly. We've replicated this in separate offices, so it's not the wiring. And everything works fine running off of the wireless.
Things we've tried:
Disabling the 1394 Connection
Disabling the wireless connection
Disabling all non-LAN adapters
Restarting the computer
Disabling/re-enabling the LAN connection
Updating the network card drivers
Resetting IE's settings
Cleaning out the user's temporary internet files
Logging into the machine as a different user (local administrator)
Things we know aren't causing the problem:
Firewall
Antivirus
Our network
Proxies
View 1 Replies
View Related
May 15, 2012
i would like to know the config. steps required for setting up fiber link between two cisco c3650v2
View 4 Replies
View Related
Feb 11, 2012
My D-link wireless router (WBR-1310) keeps dropping my internet/email connection. The little green lights are all flashing intermittently except of the one on the far left which stays on. I will have a connection for a little while/few minutes and then it drops.
View 3 Replies
View Related
Jun 10, 2011
How to set up D link DWL 2100AP as wireless router?
View 1 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Oct 26, 2011
I have a Latitude D820, Windows XP, SP3. At my office I have a regular docking station but at home I have a D/Dock docking station. When I dock the 820 at home the Broadcomm network card works flawlessly. When I dock it in the office, it will occasionally work but most of the time the link light and data light on the docking station are on solidly and XP reports that the cable is unplugged. I have tried two different docking stations with identical results and also tested the cable by plugging it into the docking station that holds a D810. With the D810 it worked normally.
View 1 Replies
View Related
Feb 2, 2012
I recently re-installed the driver for the 1390 WLAN Mini Card after not having wireless for a few years, and have a few problems. In the Windows XP Home Network Connections folder, the Wireless Network Connection Icon shows, "Acquiring Network Address", but never gets past that. I ran a diagnostic in the "Dell Wireless WLAN Card Utility" and the card passed all the tests, even though with the card switch in the on position the LED doesn't light (??)
When I right click on the Wireless Network Connection Icon and choose, "Status", in the "General" tab I can see that the card is sending out packets, but none are being received. In the "Support" tab under "connection status" the following appears: "Address Type": Invalid IP Address, "IP Address": 0.0.0.0, "Subnet Mask": 0.0.0.0, "Default Gateway": (nothing listed).
Background: I have a Desktop (no brand) and the Dell D820 connected with a Westell Modem and a D-Link WBR-1310 Router. Both computers work great connected to the Router with a cable. Both computers are running Windows XP Home.
The only thing I can think of (and I'm remembering this from 2007 when I purchased the Laptop and had a wireless set up for a short while), is that the Modem and Router were bridged, which is not the case now. Do they need to be bridged for the wireless connection to work? Is it not necessary anymore and something called "Double Netting" or something like that is used...
View 1 Replies
View Related
Feb 3, 2012
I have a D-Link WBR-1310 modem and for some reason the internet connection drops every 4-5 minutes and then comes back after 30 seconds.I don't know what the problem is. I tried resetting the modem which didn't work. I tried upgrading the firmware from D-Link's website but it says "The version of setting file is not compatible." for the .bin file.
View 5 Replies
View Related
Feb 24, 2013
Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM
I am having difficulty setting up the W8968 to replace the router given by TM for the Unifi connection.I tried updating the firmware of the modem router and used quick setup to configure the device as a wireless router using PPPoE, but still couldn't connect to the internet using the WAN port.I noticed there was a guide for TD-W8960N to set up TM Unifi but the web interface is too different from the W8968 interface.
View 1 Replies
View Related
Feb 5, 2007
I've installed version 4.8.02.0010 of the VPN client onto a Dell Latitude D820 laptop. When I attempt to connect, I get this message. There are no firewalls running (I disabled the Windows XP firewall) and I'm running under Service Pack 2 with all of the latest security patches from Microsoft.
I even tried un-installing the client and using an older version (4.8.00.0440) and it reports a similar error in the Log file.
I'd prefer to NOT have to wipe the laptop and reinstall the O/S if I don't have to. This is the only laptop that I've experienced this problem with but it's also the first Dell Latitude D820 that I've attempted to install the client on.
Is there a problem with the Dell Latitudes and the VPN Client? Is there another way around this other than a wipe and re-install?
View 3 Replies
View Related
Jan 14, 2012
I have a Dell Dimension 4550. I have a D-Link 655 router and want to set up a wireless network in my home, using my PC. I also have a laptop that I would like to connect to my wireless network, once I get up and running. I know how to install my router (which I haven't done yet) but I am not sure if I can set up a wireless network on my Dell Dimension or not.
View 1 Replies
View Related
Sep 22, 2012
recently tried to connect a Samsung BD-EM57C blu-ray player to my wireless network. I have a D-Link WBR-1310. Have one desktop, Smart tv currently on network --no problems. Blu ray will find my network but cannot connect. "unable to connect enter ip address manually" which I did. Fail. "enter subnet mask" which I did. Fail. "Ip address taken enter different address" Now what?
View 2 Replies
View Related
Apr 6, 2013
Region : India
Model : TD-W8968
Hardware Version : Not Clear
Firmware Version :
ISP :
I am planning to buy TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router, which supports 3G dongle over its usb port.I already had Reliance Netconnect + Dongle (ZTE2736) .I want to use this Dongle with W8968.Is it possible to use this Dongle? What are the configuration steps for this dongle with W8968?
View 4 Replies
View Related
May 8, 2012
I'm setting up a Wireless Bridge 1310 with two APs. The Root Bridge is working fine, but the Non-root Bridge is not working, the radio 0 is not UP (It is in reset mode), bellow the settings of APs and logs Non-root Bridge.
AP Root Bridge
dot11 ssid BRIDGE-INTERSITE
authentication open
[Code].....
View 3 Replies
View Related
Nov 28, 2010
I have two 1310 bridges...one set as root and the other as non-root.For some reason they keep losing connection. When I reboot the non-root bridge, link is established.Both bridges have an antenna connected with the right connector and they have the setting antenna transmit right antenna receive right
logs from root bridge
Nov 29 13:52:53.311: %DOT11-4-MAXRETRIES: Packet to client XXXX.XXXX.XXXX reached max retries, removing the clientNov 29 13:52:53.311: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station XXXX.XXXX.XXXX Reason: Previous authentication no longer validNov 29 13:52:53.568: %DOT11-6-ASSOC: Interface Dot11Radio0, Station Test XXX.XXXX.XXXX Reassociated KEY_MGMT[WPAv2 PSK]Nov 29 13:55:16.260: %DOT11-4-MAXRETRIES: Packet to client XXXX.XXXX.XXXX reached max retries, removing the clientNov 29 13:55:16.260: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station XXXX.XXXX.XXXX Reason: Previous authentication no longer validNov 29 13:55:16.550: %DOT11-4-MAXRETRIES: Packet to client XXXX.XXXX.XXXX reached max retries, removing the clientNov 29 13:55:16.550: Client XXXX.XXXX.XXXX failed: reached maximum retries
logs from non-root Nov 29 2010 13:52:55: %DOT11-4-UPLINK_DOWN: Interface Dot11Radio0, parent lost: Received deauthenticate (2) not validNov 29 2010 13:52:55: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down The signal strength is around -84dBm Cisco IOS Software on both bridges is: C1310 Software (C1310-K9W7-M), Version 12.4(10b)JA1, RELEASE SOFTWARE (fc2)
View 12 Replies
View Related
Jul 19, 2012
I have a Problem with a customer WLAN. The customer has a Aeronet 1130AG AP. Now i should configure a Aironet 1130 Repater for this WLAN. The initial connection from the Repater with the AP is no Problem. But after some time the Repeater lost the connection. On the AP i see following Messages:20Jul 19 19:05:28.061InformationInterface Dot11Radio0, Deauthenticating Station xxx Reason: Previous authentication no longer valid 21Jul 19 19:05:28.061WarningPacket to client xxx reached max retries, removing the client 22Jul 19 16:43:59.412InformationInterface Dot11Radio0, Station yyy Associated to Parent xxx23Jul 19 16:43:57.901InformationInterface Dot11Radio0, Deauthenticating Station yyy 24Jul 19 16:43:56.536InformationInterface Dot11Radio0, Station yyy Associated to Parent xxx 25Jul 19 16:43:51.555InformationInterface Dot11Radio0, Station zzz Associated KEY_MGMT[WPA PSK] 26Jul 19 16:43:29.078InformationInterface Dot11Radio0, Station Repeater01 xxx Associated KEY_MGMT[WPA PSK]
View 2 Replies
View Related
Oct 2, 2012
just to mess around i reinstalled xp/formatted drive on dimension 4550. plugged ethernet cord from computer to router but can't get any connection to internet. going through the network wizard makes me set up local networks. tried to install new drivers from download page nothing is working.when i open the network connections page under control panel no LAN shows up or anything.
View 3 Replies
View Related
Oct 14, 2012
I have a Dell XPS 8500 with Dell 1073 802.11b/g/n Network adapter, recently I have change my old linksys WRT54G router for a new TP-Link TL-WR2543ND router. Since this change i have no more connection on my desktop computer. All setup is just the same uses at Linksys Router IP 192.168.0.1 Security WPA/WPA2 Personal AES the desktop connecto via Wifi with the router that assing me ip 192.168.0.102 but i have no access to internet or event access to the router admin page. At home i have a HP notebook which works just fine and i haven't ay issue, also my wife and i have Motorola Milestone cell phone which haven't any issue, Also PS3 connect just fine. But the XPS Desktop DONT.
View 3 Replies
View Related
Nov 4, 2012
Configured a D-Link DIR-601 router? The internet is connected, but there is a yellow triangle with a exclamation mark on the bottom right corner stating it isn't connected. I read the manual and did everything as listed, but still have the same issue.
View 4 Replies
View Related
Jun 2, 2012
Why does my D-Link WBR 1310 Router constantly need rebooting? By rebooting I mean unplugging power source for 10-15 seconds then replugging it. This problem has been going on for the last 2-3 months.
View 3 Replies
View Related
Dec 23, 2011
I have a WBR-1310 D-link and was in setup this morning trying to fix my password cause the old one stopped working. Somehow I changed the password and no longer have access to the settings to change it to one that I can use to log on with my other wireless devices!!! Is there a way I can reset the whole thing? I mean something that makes sense to someone who is new to wireless internetting?
View 1 Replies
View Related
Aug 31, 2011
Just moved into apartment in Ann Arbor and am forced to use this ISP. They are not wireless friendly. Their manual sucks and will only provide tech support for $80/hour. I bought a Belkin router and got it working for my MacBook. BUT my roommate can't connect, even tho her MacBook sees the network. And I can't print to my wireless printer even tho it says everything is fine when I run the wireless diagnostics.The ISP has these rules:
- Only connect the router to the Internet or Wan port. Do not connect to the numbered ports (how do I know whether or not I've done that?)
- Do not use static IP addresses
- Do not run a DHCP server
View -1 Replies
View Related
Feb 20, 2011
Go to Control Panel.
Click on Network and Sharing Center.
Click on Wireless Network. Connection. (your nickname for router should be listed underneath).
Click on Wireless Properties.
Click on the Security tab up top.
Click on the checkbox where it says “Show characters” and it should be spelled out for you.
View 1 Replies
View Related
May 20, 2012
I have cisco 1310 bridge with IOS version Version 12.3(7)JA5. Sometimes bridges are disconnecting by showing the following error message.
*Mar 1 01:22:21.856: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 003a.99eb.cc00 Reason: Previous authentication no longer valid
*Mar 1 01:22:22.115: %DOT11-4-MAXRETRIES: Packet to client 003a.99eb.cc00 reached max retries, removing the client
[Code]....
Once it is deassossiated, ihave to manually restart the bridges. How can avoid manual restarting so it would automatically associate after some time.
View 14 Replies
View Related
Jan 24, 2013
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V4
Firmware Version :
ISP : Be Internet
I have a router supplied by my ISP which is effectively locked down, the wireless on that router give me a massive 35 Mbps (yes i know... awesome) so I wanted to get something that would allow me to stream movies wirelessly in the house. The setup I had before was Thompson DSL router downstairs (ISP router) running the DSL connection and Wireless, a TP-Link 200Mbps Power over Ethernet connecting upstairs to a Netgear ADSL Wireless router (somewhat flaky device). This router had DHCP disabled and a static IP address, I had configured wireless with the same SSID, password and channel as the ISP router and they were all happy and everything was working (most of the time except when the netgear would crash or the 35MB wifi was too slow to achieve what I wanted).
What I would like to do is this... ISP router downstairs with wifi disabled so it just handles DHCP and DSL connection, router upstairs (New TP-Link) running new WiFi, DHCP disabled (static IP address for Router) but connected to router downstairs through TP-Link Power over Ethernet.
I was hoping it was as simple as the Netgear router where disabling DHCP was enough for it to see the other router and just work but it isn't doing that
I can ping the ISP router but cannot get to the internet,
View 2 Replies
View Related
Jan 7, 2013
Trying to set up E1200. I have a DSL connection, no Ethernet connection. I do have internet access. Cannot figure out how to connect.
View 2 Replies
View Related
Jan 18, 2012
I have a WBR-1310 router that for the past few weeks has been giving me 'limited access' issues at psuedo-random intervals. The router functioned perfectly for a long time, I dug it out of storage about 8 months ago, and up until Christmas it was working fine, then both my roommate and I got tablets. Now our router is supporting 6 devices (PS3, 360, lappy, 2 tablets, smartphone) and occasionally more (other peoples phones, roommates laptop once he gets it repaired). However my research online has led me to believe that I should be able to support near unlimited wireless devices on the network (though effectively only around 30). Still, these extra two tablets are the ONLY change to the network that happened immediatly prior to this problem starting.Now I find that when I'm home alone I can go for the whole day with no network issues, but as soon as my roomy gets home and starts to use his devices the network craps out. unplugging the router and modem for 30 seconds fixes the problem temporarily, though the time before it craps out again ranges from hours to minutes.
I CAN plug my lappy into the modem directly when the router is not functioning and still have internet access, so it's definitely the router with the issue.All devices except for the PS3 are using wireless. I've done a hard reset to the router and set it back to factory settings on two occasions, I've changed the SSID and passphrase to get others off the network, I've changed the security type twice, I've tried some suggestions for similiar problems online such as enabling 'gaming mode' on my routers homepage, and setting a custom IP address (I used 10.0.0.1).Over the last 72 hours or so (the problem has existed for a few weeks) I've also received a few messages about my laptop having an IP address conflict; unsure if that is related, but I'm still able to access the internet when I get that message (albeit slower than average) [code] I will update this with another ipconfig the next time my internet dies; which I'm sure will be sometime today.
View 3 Replies
View Related
Feb 1, 2013
New pc that i built, everything works properly but the internet connection...Windows said i needed the drivers for my router, so i tryed installing them but it said Enable Wired Network Adapter and said to retry after. I don't know what it's talking about. Router is D-Link WBR-1310.
View 4 Replies
View Related
Oct 31, 2012
Region : Ireland
Model : TD-W8961ND
Hardware Version : V1
Firmware Version : 1.0.0 Build 111125 Rel.28195
ISP : Eircom
I'm trying to set up external Wake On Lan with my TP Link router.
I can get it working internally using the mac address I'm just wondering how do I do it remotely?
View 7 Replies
View Related
Jan 2, 2013
Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP : Streamyx
In the process of Lan setting my new wireless adsl modem router TD-W8968, an error message shown when I press save. Error Code: 1, Internal error.
View 2 Replies
View Related
Jul 6, 2012
What are the steps to turn on wireless capability permanently?
View 1 Replies
View Related
