D-Link WBR-1310 Limited Access At Random Intervals
Jan 18, 2012
I have a WBR-1310 router that for the past few weeks has been giving me 'limited access' issues at psuedo-random intervals. The router functioned perfectly for a long time, I dug it out of storage about 8 months ago, and up until Christmas it was working fine, then both my roommate and I got tablets. Now our router is supporting 6 devices (PS3, 360, lappy, 2 tablets, smartphone) and occasionally more (other peoples phones, roommates laptop once he gets it repaired). However my research online has led me to believe that I should be able to support near unlimited wireless devices on the network (though effectively only around 30). Still, these extra two tablets are the ONLY change to the network that happened immediatly prior to this problem starting.Now I find that when I'm home alone I can go for the whole day with no network issues, but as soon as my roomy gets home and starts to use his devices the network craps out. unplugging the router and modem for 30 seconds fixes the problem temporarily, though the time before it craps out again ranges from hours to minutes.
I CAN plug my lappy into the modem directly when the router is not functioning and still have internet access, so it's definitely the router with the issue.All devices except for the PS3 are using wireless. I've done a hard reset to the router and set it back to factory settings on two occasions, I've changed the SSID and passphrase to get others off the network, I've changed the security type twice, I've tried some suggestions for similiar problems online such as enabling 'gaming mode' on my routers homepage, and setting a custom IP address (I used 10.0.0.1).Over the last 72 hours or so (the problem has existed for a few weeks) I've also received a few messages about my laptop having an IP address conflict; unsure if that is related, but I'm still able to access the internet when I get that message (albeit slower than average) [code] I will update this with another ipconfig the next time my internet dies; which I'm sure will be sometime today.
View 3 Replies
ADVERTISEMENT
Mar 26, 2011
My internet is randomly disconnecting every once in a while. It seems to be at random intervals of 30 minutes to two hours. While it is disconnected my modem lights are still on and it says that I am connected to the internet.I am wired directly to a modem from my computer.
View 4 Replies
View Related
Feb 11, 2013
Wired PC randomly disconnects from network at random intervals each dayoday it has done so 3 times. The only way I have found to get it working again is to reset the router which can be inconvenient. When it disconnects all wireless devices continue to work and I have no issues like this with my wired consolesI switched to using a static IP address, since having an automatic one gave me the same results [i have since switched back to automatic]Be happy for any suggestions on how to sort this. I am using W7 OS and I'm using an Orange router. I don't know if its relevant, but when I go to reset my router I have noticed that the download light on my router is flashing like crazy when my PC has disconnected.
View 7 Replies
View Related
May 30, 2012
I have a simple ASA, ACS, AD schema for RA VPN authentication. All is working for a few months now, but since the initial deployment we have this connectivty issue regarding ACS and MS AD. At random intervals, 1 month/1 week, the ACS connection status becomes "DISCONNECTED" although the CLI shows that ad client is running. But because of that, no RA VPNs can be authenticated. Clock is not a problem, since it didn't change automatically nor was manually configured prior to the malfunction.
View 2 Replies
View Related
Jan 27, 2013
our RV220W router has been experiencing random reboots throughout the day, causing a network outage for our local network for the few minutes it takes for the router to start up again. We've seen it reboot at least 5 today alone (and the time is currently just a little over 1pm).I'm having trouble finding the reason for these reboots in the router's logs, although I find these two lines repeating in the error log:
Mon Jan 28 13:20:52 2013(GMT+0100) [rv220w][System][EVTDSPTCH] umiIoctl (18, UMI_CMD_DB_UPDATE(4)) failed. table=dot11STA row=11
Mon Jan 28 13:20:52 2013(GMT+0100) [rv220w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 11 failed. status=-1
I'm not sure why these messages pop up, since we're not using the bandwidth limiter module of the router (granted, we do use QoS profiles to ensure our own LAN is prioritized over the guest VLAN). I'm also not sure whether this is related to the router reboots.
I also find the following repeated line in the warning log:
Mon Jan 28 12:50:50 2013(GMT+0100) [rv220w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
The router is currently running on firmware version 1.0.4.17 (latest official release), since we needed support for hairpin connections (as I found out in a previous thread of mine). I've seen the suggestion of downgrading to a previous firmware version in another thread, which has possibly solved it for the poster in that thread, but as we really need the hairpinning support, I don't know which firmware version is safe enough to downgrade it to, if needed.
View 10 Replies
View Related
Jan 26, 2011
I've been having this problem on my desktop and it's really annoying when i try to play online games that need a constant connection.I have Windows XP and i'm using a wireless connection via a wireless USB adapter. The problem is that the internet is running fine but at random intervals it starts to not send or receive any packets. This will usually cause my to disconnecting during a game causing other players inconvenience. After I d/c the internet will usually take 5-30 seconds to start sending and receiving packets again and regain connection.
View 14 Replies
View Related
Jun 29, 2012
Router is connected to my ISP with the option Keep alive and redial value of 20 seconds (the lowest i can set). There are two distinct problems: Router drops connections at random intervals. It can happen once a day or several times a day. It always happens overnight (so every morning it isn't connected). This doesn't seem to be related to ISP as direct connection to computer is stable.The Keep alive option isn't working. When it drops connection it isn't trying to re-eastablish it for at least 2 minutes (the longest i have waited so far, 6 times the redial value configured). Producing external traffic (e.g. constant pinging of some host by IP address, refreshing some web page) doesn't work. When i log on to admin console (browser based) simply clicking connect button brings connection back online. I've even been looking at status page constantly refreshing to see if it ever made a single attempt and it appears it didn't.I did my "homework" before posting (upgraded FW to 2.0.02 build 3, finetuned MTU).
View 2 Replies
View Related
Dec 12, 2012
The wireless is just beyond my computer's ability to detect. I have a D-Link WBR 1310 Router hooked up to a high gain wireless antenna-yes, clear line of sight. I have no direct access to our community modem or ISP.
View 10 Replies
View Related
Jun 7, 2011
Since I came back from vacation I've been having a problem with my wireless card. It seems that at random times my connection will go to limited connectivity, very rarely it will fix itself quickly, but the only real way to fix this is to restart the computer.
I thought it could be something to do with the router or the fact it was downstairs, but we recently changed provider and got a brand new one and it now sits in the same room as me and my laptop. Still have the same problem. And I'd already tried changing the router's channel and frequency and had no luck.I saw on another thread that the ipconfig /all was requested, so here it is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : lesleycheese-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Con
nection
Physical Address. . . . . . . . . : 00-1B-77-00-B8-53[code].......
View 13 Replies
View Related
Aug 10, 2011
I have the Qwest/Actiontec Q1000 modem/router. I go to the ip address using my web-browser and open up advanced configurations -> access scheduler. I select a computer (and it automatically adds the MAC address) and then the days/times I want the internet to be accessible. However, when I click "add" (to add my internet allowance to the scheduler list) it just says 12:00 to 0:00, which is essentially permanently blocking the internet for that computer.
View 7 Replies
View Related
Jul 9, 2012
Model: DIR-655
HW Version: A3
Firmware: 1.35EA
One problem with DIR-655.
Drops wireless connection very often. On the taskbar in wireless network center (next to speaker and time) I can find info: Limited Access. Router doesnt drop internet connection but only wireless connection. Sometimes 3-4 times an hour. It's very annoying especially when you upload large files (for example 16-20MB) to your mailbox. It drops connection and we get Limited Access and you can try to upload again and again. Anotner example during VOIP conversations for example on skype it drops and disconnects skype.Firmware was never updated just router was bought with this firmware. We are located in China so its correct.When laptops are connected using LAN cable it works fine but its impossible to keep laptops connected using LAN cables all the time.The problem occurs only when we are connected by wireless.QOS is enabled, WISH is enabled.When QOS and WISH disabled it's same also drops connections on WIFI.
View 7 Replies
View Related
Dec 15, 2012
Region : Brazil
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.17 Build 120509 Rel.33890n
I have a notebook connected by Wireless and a desktop connected by cable.Sometimes my wireless connection are limited, but my computer (connected by cable) still working fine.I`ve tried to disable DHCP and input static IP address but I didn't work.I have used for almost one week without problem, and sometimes this problems happens three times in one hour.The only way to reconnect the wireless is restart the TP-LINK and my internet modem.I`m using the latest firmware version.
View 1 Replies
View Related
Nov 21, 2012
Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : starhub
1) Always auto disconnect (limited access),
2) My smart phone Motorola MB860 (android 4.0.4) Can connect but can access internet.
3)Always connect to 2.4GHz ,never see connect to 5GHz.
4)Wireless connection 15-20 Max Mbps Only ,LAN can up to 50 Mbps .
View 9 Replies
View Related
Jun 2, 2012
Why does my D-Link WBR 1310 Router constantly need rebooting? By rebooting I mean unplugging power source for 10-15 seconds then replugging it. This problem has been going on for the last 2-3 months.
View 3 Replies
View Related
Dec 23, 2011
I have a WBR-1310 D-link and was in setup this morning trying to fix my password cause the old one stopped working. Somehow I changed the password and no longer have access to the settings to change it to one that I can use to log on with my other wireless devices!!! Is there a way I can reset the whole thing? I mean something that makes sense to someone who is new to wireless internetting?
View 1 Replies
View Related
Feb 3, 2012
I have a D-Link WBR-1310 modem and for some reason the internet connection drops every 4-5 minutes and then comes back after 30 seconds.I don't know what the problem is. I tried resetting the modem which didn't work. I tried upgrading the firmware from D-Link's website but it says "The version of setting file is not compatible." for the .bin file.
View 5 Replies
View Related
Feb 1, 2013
New pc that i built, everything works properly but the internet connection...Windows said i needed the drivers for my router, so i tryed installing them but it said Enable Wired Network Adapter and said to retry after. I don't know what it's talking about. Router is D-Link WBR-1310.
View 4 Replies
View Related
Feb 11, 2012
My D-link wireless router (WBR-1310) keeps dropping my internet/email connection. The little green lights are all flashing intermittently except of the one on the far left which stays on. I will have a connection for a little while/few minutes and then it drops.
View 3 Replies
View Related
Apr 29, 2013
I've got a Cisco Aironet LAP1310AG-A-K9 that I can't access through Internet Explorer or Firefox (multiple versions). I set a static IP in DHCP, I can ping the unit, but I can't browse to the GUI.
View 1 Replies
View Related
Sep 22, 2012
recently tried to connect a Samsung BD-EM57C blu-ray player to my wireless network. I have a D-Link WBR-1310. Have one desktop, Smart tv currently on network --no problems. Blu ray will find my network but cannot connect. "unable to connect enter ip address manually" which I did. Fail. "enter subnet mask" which I did. Fail. "Ip address taken enter different address" Now what?
View 2 Replies
View Related
Nov 21, 2011
I have a pair of Aironet 1310's I am needing to bridge. I have used the CLI to configure the BVI1 with the ip address and verified it. I then tried to access the GUI to configure the device via Internet Explorer and it would not provide access. I read that it had to be older versions of IE but my OS will not support older versions. I then downloaded Netsace Navigator 7.01 as indicated, but still did not get access.
Then I thought maybe if I can access the GUIvia the IPSU tool but I have Googled the Cisco IPSU and cannot find a downloadable link.
View 3 Replies
View Related
Sep 13, 2012
I am looking at outdoor access points, I want to stick with Cisco aironet, we currently have 6 of them that are 6 years old and running great, one has had a problem because of humidity, dried it out and relocated and we are good again.
I was looking at the Aironet 1310 Outdoor access point, but I can't find much information on it. I am looking to see how many SSIDs can be setup, we currently have 2 one private, and one public, this is done with VLANS. I am also looking at finding out about the power injector, it converts to coaxial cable, it has 2 RJ-45 and 2 Coaxial, does this mean if we get 2 access points, then I only need 1 power injector?
View 1 Replies
View Related
Jan 7, 2012
I have just started using my D-Link 1310 Router after quite a few years of it laying around. I managed to get as far as connecting my D820 and my Desktop in a basic Network. I have Windows XP Home on both the Desktop and Laptop. The next step I want to accomplish is making the Laptop wireless with my apartment. When I first had the Router, I of course had Technical Support and my Warranty with Dell was still active, so I was walked through the process and took notes. The only file I made note of for this step was installing the driver (US) WLAN Card Rev.A12, but there must be something else that enables the WiFi catcher because I don't have any icon in the System Tray and no way to access it.
I also remember it being necessary to Bridge the Modem and Router, (I believe we did it from the Verizon site). Though I was told recently that Bridging is not used anymore, now they do a thing called "Double Netting"?
View 1 Replies
View Related
Dec 29, 2012
Network running about 60 computers, most of which are running windows 7 professional. Some are on a domain, some are not.At (seemingly) random times, some computer on the network will lose the ability to browse websites (including the web interfaces of networked devices). I can't identify what circumstances cause this to occur. I only find out about it when someone calls me.From the affected computer:I can ping sites I can ping our Cyberoam UTM (which acts as our DNS, DHCP, and firewall)disabling/enabling connection doesn't fix the problem releasing/renewing ip doesn't fix the problem flushing dns doesnt fix the problem uninstalled antivirus on two test machines, problem still randomly manifests.replaced the Cyberoam with newer model users have claimed that if they wait a long period of time (40+ minutes) the problem sometimes resolves.rebooting the computer resolves the issue until it randomly occurs again changing the computer's mac address also resolves the issue until it randomly occurs again.
View 3 Replies
View Related
Sep 16, 2010
We have 2 aironet 1310 aps setup as infrastructure access points between 2 buildings. One went south on us & we placed it. Before the bad one went down, we were able to manage both remotely & could see them from the next device via CDP. Now, we can't connect or even ping either AP. And the weird part is that the switches that connected to each can see each other via CDP, but not the access points between them. I'm attaching the configuration. Before I make the 2.5 hour drive back to the site, what I may have misconfigured on either or both access points?
View 3 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Apr 4, 2013
My DIR 651 randomly drops connection, is not set for IP fragments (error on PS3 even though I set MTU), and has a flashing green globe compared to my other DLink router which has a solid green globe (replaced with DIR 651). I have BHN Road Runner Turbo (Speeds of 30mb/2mb) and my modem (supplied by ISP) is a Motorola SB5100.
View 10 Replies
View Related
Feb 25, 2013
I have been experiencing random disconnection from the internet completely out of the blue lately. Router has worked great for a long long time. Now it just drops connection and is down for about a minute and then I can reconnect or reload a webpage.I have my xbox live and PC wired with a laptop wireless. It drops everything at the same time everytime. I hardwired my xbox to the modem and gamed all day. I would assume this could eliminate the modem as an issue. There isnt any inconsistencies with the router's colour or lights to my knowledge either.
I put a new Ethernet cable from modem to router to try and I thought it fixed the problem but it lasted problem free for about 6 hours then it crashed.
View 1 Replies
View Related
Apr 12, 2011
I should start by saying I am no novice when it comes to networks but this router has been nothing but a issue since day one.
*The Setup - 2 wired PCS, 2 Wired Macs, 1 Wireless Iphone, 1 Wireless Ipad.
WPA2 Only / AES key, Channel 6, G/N only, Hidden SSID.
*The Problem - 95% of the time the wireless and wired is running fine. However, Sometimes randomly webpages on the computer will stop loading... but heres the kicker... other internet connected programs like Ventrilo, or torrents, or games will still be working and running from the net like there is no problem. When this happens the internet browsers on the macs and PCs will say page cannot be displayed instantly. Happens to all computers at the same time. After about 10min the webpages will load again. I have 16mbs internet and while this is happening my games and voice chat programs do not go up in ping at all.
I have turned off QoS since that made the most sence... but other then that I have no been able to figure it out. I even turned off wireless while it was happening and it still didnt fix it. A sure fire way to fix it is to restart the router.
I am 100% stumped. Do I just have a bad out of the box router? it is only 2 weeks old.
View 14 Replies
View Related
Oct 30, 2011
I just recently purchased a D-Link 615 and i've been having disconnection issues with the internet. Every now and then the internet connection disconnects and i have to reboot the router to have internet access again.
View 1 Replies
View Related
Mar 30, 2011
I've been having a number of issues with performance on my DIR-655 with streaming media, internet connection being dropped and random reboots. Over the last couple of weeks it has been getting worse, to the point where I'm about to act out the printer scene from Office Space but with my DIR-655! It has been rebooting, completely killing WiFi networks and Internet Connection, almost every 20 minutes when I'm watching DivX over the network. The relevent information about my network is as follows:
-Hardware:
-D-Link DIR-655
-Hardware Version: A3 (US) , Firmware Version: 1.34NA
As an experiment I reconfigured the DSL-380T into PPPOE mode and set the DIR-655 into DHCP Client. This was over 2 hrs ago. So far - no random reboots, no jittering on the Media Center Extender playing videos, no internet drop outs..It seems to me that the DIR-655 doesn't cope well when it has to do the PPPOE network protocol as well as the routing, WiFi and other basic functionality that it should be able to cope with.I'll leave it running as it now is and report back later, but from the dramatic change in behavior I'm hoping that I've finally cracked my perf issues with the DIR-655.
View 1 Replies
View Related
Feb 17, 2011
I have a brand new Dell laptop running windows 7 connected to a sky router wirelessly. My internet connection randomly just drops. At 1st I could just click on the yellow triangle and troubleshoot and it would reset the network adapter. I cannot do that now - Im having to disable the adapter and the enable it and Im back on the internet.I have set it up so I am connecting via a manual IP address as I wondered if when the kids PS3 was connecting it was pinching my Ip address.
View 11 Replies
View Related
Apr 1, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : HNS/Instanet (Cable Internet)
I am using the Router in 3G/4G mode, with WAN only (PPPOE) enabled. I have set a personal SSID in the Wireless > Wireless Settings > Wireless Network Name field.
I do not see the particular SSID on my computer, instead on every reboot / restart of the device a random SSID is generated. see attached screenshot. I can connect and everything works well, but I have to enter the WPA key after each reboot.
View 2 Replies
View Related
