Cisco WAN :: To Setup QOS On 3560s
May 27, 2013
I am replacing some WAN connections: Point to Point T1's (running from 2820's to a 7200). I am replacing them with metro Ethernet connections with a 3560 layer 3 switch at each end. We run Cisco Call Manager, and have IP phones at our locations. I want to set up QOS on my WAN connection to make sure my packets arrive in the correct order. I have a few remote users complaining of voice problems, crackling, etc. The 3560's are acting as routers, and don't directly connect to all the phones. So I won't be using the mls/auto QOS features, I don't think. I am trying to use service-policies and class-maps to handle qos, as I have done in the past, but I'm not finding the correct commands. This is the QOS I currently have set up on my 7200/2820
View 3 Replies
ADVERTISEMENT
May 4, 2013
I've browsed around to the other support strings to make sure I didn't miss anything, but I can't seem to get this to work. I have the latest sl_suspend_ports.tcl and tm_suspend_ports.tcl created by Joseph Clarke from strings that verified they worked as planned. Here are the commands I issued to register the scripts -
Directory of flash:/policies/
9 -rwx 3101 May 3 2013 07:58:03 +00:00 sl_suspend_ports.tcl
10 -rwx 4669 May 3 2013 07:58:44 +00:00 tm_suspend_ports.tcl
conf t
event manager directory user policy flash:/policies
event manager policy sl_suspend_ports.tcl
event manager environment suspend_ports_days 1
[code].....
It doesn't appear to work though. Essentially, we have a need to make sure all computers are always on and all ports not active for >24 hours to be shutdown and moved to a designated vlan (I added the 'lappend' statement to the script to specify the additional command of assigning the vlan) I'm running 12.2(55)SE7 on Catalyst 3560s and 3750sIs there a way to manually run the script? Did I miss anything in the configuration?
View 19 Replies
View Related
Nov 8, 2011
Is there a way to set up Quick VPN on the RV120W without changing the internal subnet? I have just taken over responsibility for a network and I don't know all of the nooks and crannies yet, so I'd rather not change the internal sub net. I've tried setting up a user then changing the LAN settings afterward, but it automatically removed the VPN user when I did so.
View 1 Replies
View Related
Jan 1, 2012
I've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.
View 5 Replies
View Related
Oct 10, 2011
We are trying to setup a Cisco SSL VPN. When outside of the network and after logging in the web page, you have the option to Remote Control your PC at the office. When clicking that, it takes you to the login screen with MACHINEuser... Is there any way to make DOMAINuser default or even just automatically login since you've just logged in the VPN anyway?
View 2 Replies
View Related
Jun 7, 2011
How to set up vpn in cisco 871 k-9 and make connection from internet to cisco by using vpn?How to set up vpn client? Do I need certificate for this? Do I need to run pki server on cisco?
View 5 Replies
View Related
Oct 27, 2011
How to setup LMS4.1 soft appliance in a HA (active/standby) setup? Config guides only mentions windows and solaris setup using HA but nothing about the soft appliance. I am guessing that I would only need license on the active box.
View 1 Replies
View Related
Apr 30, 2011
I'm trying to setup my DMZ so all my servers will have public IPs assigned to them. I'm currently trying to use two interfaces on each server, one with a private IP and then one with a public IP. All my internal traffic will go over the private interfaces...this is working. However, I'm having a problem trying to get it so the public interfaces work. Ultimately, these will be VM Hosts and have VM guests on them, each guest will have it's own public IP.
View 14 Replies
View Related
Apr 26, 2013
i am trying to setup access to the net on my ASA i have 2 different subnets on the inside and one to my outside hooked into TWC cable i am not sure i have the config right i am in the testing phase. I also have a vpn tunnel to a c2811?
View 7 Replies
View Related
Dec 4, 2012
I acquired an 819 router with a integrated HSPA+R7 modem, does anyone setup the 3G internet option with this modem? My 3G ISP is Telcel.
View 6 Replies
View Related
Apr 23, 2011
I am now confused whether SSL VPN can be set up on Cisco 881/K9 router.If yes, for just 5 users, do I need to buy the license or license is bundled with the router?
View 2 Replies
View Related
Mar 19, 2012
i have a branch router that connects to mpls WAN. Also has a second interface that is used for dmvpn failover in case WAN goes down.We want to use this second interface also as the primary internet circuit for the branch. I changed the default route to the next hop address on the other side of the second interface and expected this to work.But i was told i need to set up NAT for this to work, and set up an ACL for NAT to use. how to set up NAT?
View 1 Replies
View Related
Sep 20, 2011
Trying to setup a VPN between 2 rsv4000s. The tunnel shows on both sides as up and connected but cannot see the server on the other side? I can ping from a machine on one side to the other router but no farther?
View 2 Replies
View Related
Jun 28, 2011
I am working on getting ACS to authenticate VPN users. I have a wireless/TACACS policy in place and working.setup of the Authorization profile as well as the policy?
View 6 Replies
View Related
Sep 28, 2012
I'm trying to set up NAT overloading (so all inside hosts can access the internet through one public IP) and also PAT entries for other public IP addresses.
PAT is working fine, but NAT is not.
[code]....
View 5 Replies
View Related
Jan 25, 2013
i've been trying to setup an SSL VPN on my 1841 lab router but with no luck. i tried both clientless (anyconnect 2.5) and using a vpn client (anyconnect 3.0).
i'm using a win 7 PC with IP 172.16.1.50 directly connected to 1841 FE0/1 port. tried disabling PC FW, used both IE and FF and delete cookes but to no avail. below are my config and some show and debug output.
SSL_VPN_GW#show webvpn gateway
Gateway Name Admin Operation
------------ ----- ---------
SSL_VPN_GW up up
SSL_VPN_GW#show webvpn context(code)
View 1 Replies
View Related
Nov 10, 2011
Using LMS 4.1 with an address that are natted I see that SWIM-jobs to fetch IOS-images are using the server's "un-natted" address.Can't find how to setup the nat-address in LMS so the devices uses that one instead when communicating with the server with scp for instance..
I believe this was possible in LMS 3.x, but how is it configured in LMS 4.1?
View 1 Replies
View Related
Apr 1, 2011
I have a manufacturing client that needs a vpn setup to one of their machines. They currently have one public static ip address and use a basic linksys router. Do I need a different vpn router? Do I need another public static IP?
View 3 Replies
View Related
Feb 3, 2011
I have two PCs running on windows XP on LAN network, i configured one PC as server and other as Client for VPN connetion but when i am connecting from client to server then i am getting "Error 800:Unable to establish VPN connection.The VPN server may be unreachable or security parameters may not be configured properly for this connection."
View 2 Replies
View Related
Mar 15, 2011
I use StreamVia VPN service,this is their webpage StreamVia VPN - UK VPN, US VPN, DE VPN - Access blocked websites easily ,which was the cheapest one I found a couple of months ago, which i like because its only 14 euro every 3 months.Zhow to set up my VPN to the DD-WRT!?
View 2 Replies
View Related
May 5, 2012
I'm looking to setup my own VPN mostly for fun but also mostly to mask my IP address and possibly try and stop Comcast from completely shutting down my internet when I torrent or download anything.Using a CustomFirmware would also be fun so having that ability is a plus as well.
View 5 Replies
View Related
May 28, 2011
I have been trying to setup a LAN-to-LAN VPN between two sites that are using a 3000 series CISCO Concentrator. After following the basic setups from the CISCO site, I am still unable to create a tunnel. At the moment I'm starting to believe it is how I have physically setup the network. Site 1 is using a Billion BiPAC 7404VNPX ADSL2+ Modem, Site 2 is using a Netgear DGN2000 ADSL2+ Modem, The VPN Concentrators are setup behind these devices with each firewall setup to allow the needed ports forwarded.
View 5 Replies
View Related
Jan 25, 2012
I have a ASA 5520 with a functional IPSEC VPN using the Cisco VPN client. This allows my remote users (Staff) using laptops to come in from anywhere on the Internet and tunnel in. Works great.Next, we need to stand up a VPN over a Juniper SSG5 so that when we have groups working outside of our network, they can tunnel back into our network. If they were going to be coming from a known, fixed IP, or even netblock, we'd probably use Route-based setup from a Juniper SSG5 into the ASA 5520. But they may very well be coming from any IP. I am thinking this leads us to Site-to-Site VPNs- it won't be Network Client access obviously, nor will it be Clientless (browser-based).
View 9 Replies
View Related
Nov 2, 2011
How do you setup a Clint VPN on a RV042
View 1 Replies
View Related
May 5, 2013
I have a cisco box Nexus 5548 box i need to setup.
what is the basic configuration i need to do so as to setup the following:
1. Management interface
2.Reduce the switch priority to join other switches in the network
3.setup etherchannel etc
View 1 Replies
View Related
May 7, 2012
typical ADSL configuration. My ISP only sends out DNS information automatically (PPP) - no static entries. I need to capture this information and relay it to users via DHCP. Currently when I do "ipconfig/ all" all DNS entries are empty.
View 6 Replies
View Related
Aug 28, 2012
When I run installation process I have received unexpected error:I have windows 2008 R2 x64. Antivirus is disabled and I have administrator privilege.
View 6 Replies
View Related
Aug 31, 2010
To set up AnyConnect on my ASA5505? I have my VPN access working properly through the Cisco client however I want to be able to use the clientless program as well that is available.
View 1 Replies
View Related
Sep 30, 2012
I've setup a NTP service by using Cisco 2811 routers. This works fine at the moment, but in the end there are some questions left.
1. I'm using two 2811 Routers, one for primary, which is resceiving the time from PUBLIC NTP 1, and one for backup, which is resceiving the time from PUBLIC NTP 2. Is it possible to compare these to times an check if the match? And if not, generate an alarm via e.g. SNMP
2. Is it possible to check via SNMP, if the routers are reaching PUBLIC NTP 1 and PUBLIC NTP 2 for sync?
View 3 Replies
View Related
Aug 23, 2012
I have a 1721 router in my home & I want to setup it for firewall/ vpn. Is it recommended to purchase a WIC-1ADSL? What module is recommended for VPN? Is it possible to setup VPN using DSL / Dynamic Ip connection ?I want to explore on Cisco security & I get this advice from a supplier.
View 1 Replies
View Related
Apr 18, 2013
I'm trying to setup following scenario which is working with no issue on netgear switches (like GS108) but I have not been able to get it to work on Cisco SG-200 I did quite a bit of reading here on many post but nothing seems to work.
View 6 Replies
View Related
Mar 17, 2013
ASA 5505 Sec plus lic w/OS 9.1
I want to setup a quick and simple VPN server on my ASA. I want to do local authentication and, once authenticated, I want to allow all internal access. I only have 1 WAN IP. I'm finding a ton of conflicting info online. The ASA is already setup and is operational. I just need the correct commands to setup the VPN.
View 6 Replies
View Related
May 3, 2012
I'd like to setup a DMZ network with the ASA5505. Do I need the "Security Plus Bundle"?
View 1 Replies
View Related
