Cisco WAN :: Traceback Messages On ISR 2800 Router?
Mar 17, 2010
provide input on what these Traceback messages are and how they are caused:
*Mar 15 23:07:57.250: %SERVICE_MODULE-4-WICNOTREADY: Unit Serial0/1/0 not ready for next command -Traceback= 0x41173B5C 0x40371894 0x40371928 0x40371CE0 0x40372794 0x40369AF0 0x40382908 0x4037FEB4 0x4037FF80 0x41EF56B4 0x41EF95E4 0x41EEA51C 0x41F12B00 0x42183F44 0x42183F28*Mar 15 23:08:00.250: %SERVICE_MODULE-4-WICNOTREADY: Unit Serial0/1/0 not ready for next command -Traceback= 0x41173B5C 0x40371894 0x40371928 0x40371CE0 0x40372794 0x40369AF0 0x40382908 0x4037FEB4 0x4037FF80 0x41EF56B4 0x41EF95E4 0x41EEA51C 0x41F12B00 0x42183F44 0x42183F28*Mar 15 23:08:03.250: %SERVICE_MODULE-4-WICNOTREADY: Unit Serial0/1/0 not ready for next command -Traceback= 0x41173B5C 0x40371894 0x40371928 0x40371CE0 0x40372794 0x40369AF0 0x40382908 0x4037FEB4 0x4037FF80 0x41EF56B4 0x41EF95E4 0x41EEA51C 0x41F12B00 0x42183F44 0x42183F28.... and so on.
We recieved this for one of our routers. Rebooting it worked, so it's likely a software bug and we will upgrade the IOS soon, but I would like to understand what these log messages.
View 5 Replies
ADVERTISEMENT
Mar 9, 2013
I'm getting below error on 7206VXR (NPE-G1) with IOS "c7200-js-mz.124-3i.bin".Attempt to use contiguous buffer as scattered.[code]
View 3 Replies
View Related
Jul 13, 2011
EEHYP_CS_801#sh logging Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: disabled
Monitor logging: level debugging, 236 messages logged, xml disabled,
filtering disabled
[Code].....
View 5 Replies
View Related
Oct 3, 2012
I have noticed poe log messages in my cisco 857 router, looking around there is mention of a cosmetic ios bug pertaining to 877 router but not the 857. BUG - CSCsd68389. Why i am getting these errors on my 857?
001586: Oct 5 11:25:06.499 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001587: Oct 5 11:25:06.499 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
001601: Oct 5 13:06:29.879 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001602: Oct 5 13:06:29.879 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
001603: Oct 5 13:06:31.387 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001604: Oct 5 13:06:31.387 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
[code].....
View 3 Replies
View Related
Jun 26, 2012
Is there a way to debug syslog messages? Something like "debug ip syslog"?
View 11 Replies
View Related
Apr 2, 2013
I'm getting below msgs in my ZBFW logs on my test router. .Apr 2 23:09:43: %FW-6-DROP_PKT: Dropping icmp session 115.186.192.153:0 10.40.2.100:0 on zone-pair ZP-OUTSIDE-INSIDE class class-default due to DROP action found in policy-map with ip ident 0
The bit I'm curious about is that I am NOT NAT-ting any ICMP. Hence why is the ZBFW even triggering against the LAN IP? It should only activate after NAT according to order of operations (and hence why unlike CBAC you put the inside local IP not the outside global IP).....
If the ICMP was directed at the WAN interface (not the 10.40.2.100 internal IP) then it is allowed, but morever even if blocked it should be logged against my WAN IP (which is publicly routable not a 10.x internal).
View 2 Replies
View Related
Oct 17, 2012
I purchased an ea6500 to replace a ea4500 about a week ago and in summary, I will be exercising the 30 return policy at the retailer, and probably never buy a cisco router again.not connected to router, and router not found messages appear alot.
Internet connectivity stops, unable to log into ea6500 completely frozen, but still routes to other LAN devices (like the SPI firewall i have the monitors network usage). then ranomdly comes back, and goes. can switch AP, and other will work, non-stop. is DEFINATELY ea6500.
sometimes I have to power cycle 6-7 times before it will maintain a wireless network that doesnt drop every 15-30 seconds.otherwise when i connect to the wireless, it log on for 10-15 seconds, then drops off and "Attempts" to reconnect.often stalls out, and crashs when USB external drive is connected at first. (again, power cycle 6-7 times to get to work properly)windows 7, and OS X 10.8 on 3 differant machines.
seems to connect better on the windows machines, and sometimes connecting with a windows machine allows apple ones to connect properly after... weird (OS X bugging up DHCP server? bacisally, when it goes down. it can take an hour to get my wireless back up, power cycle, and then see if its working proplerly, it usually isn't, try again... etc.
View 5 Replies
View Related
May 14, 2013
i hace a VPN configured between two Cisco ASAs, but I have a problem to reach a network behind a router 2800.
View 7 Replies
View Related
Mar 10, 2013
When I tried with Security disabled, I could FTP and see my drive from an external network. However, once I rite & Security is enabled with write and read "" granted with a user profile created, the FTP Client has some error message; Could it be due to mode in FTP settings? (passive is set)
View 1 Replies
View Related
Oct 17, 2012
want to ask something about configuration ruter 2800I already have a usb to DB9 | DB9 to RJ45but i have a problem like the image below
View 19 Replies
View Related
Dec 21, 2011
How to add a wic-2t card on router 2800
Had the card as follows
I want to know routr 2880, such as the following picture
View 1 Replies
View Related
Sep 19, 2011
I am operating a 2800 series Cisco router. The router is working fine except that I am not able to SSH into the router. I have checked the running config with cisco's documentation and every line is correct. Prior to me getting this job they did an update and think they have corrupted the a certificate key for SSH.
Any command to generate just the SSH key and not all the other keys that would cause bigger connection issues.
View 1 Replies
View Related
Feb 23, 2012
I have 2 2800 series routers configured the same, but with different subnets. One works fine, the other the client can't obtain an IP, and hardcoded, cant ping.
I ran DHCP debug and I can see the router assigning the IP, and I see and ARP entry that matches the MAC of the client.
*Feb 24 11:33:55.915: DHCPD: Sending notification of DISCOVER:
*Feb 24 11:33:55.915: DHCPD: htype 1 chaddr 000a.e40c.d232
*Feb 24 11:33:55.915: DHCPD: remote id 020a0000ac10760101000078
[Code].....
View 3 Replies
View Related
Jan 4, 2013
find the firmware file for 2800 series router? I need to upgrade the firmware to this router to get adsl annex M mode to work.
View 1 Replies
View Related
May 7, 2013
i have one cisco router 2811 now its not booting normally.
Router was working without any problems but due to power loss router restarted and goes into rommon mode
I tried to boot from flash and usbfalsh with different images but no use router is in still rommon mode.
here the output of my router:
program load complete, entry point: 0x8000f000, size: 0x3117470
Error : compressed image checksum is incorrect 0x8E095E7F
Expected a checksum of 0x8E0AE77F
*** System received a Software forced crash ***
signal= 0x17, code= 0x5, context= 0x80014e20
[Code].....
View 7 Replies
View Related
Jan 13, 2011
I am using Cisco Router 2800 series. How to block url and also how to remove block url
View 1 Replies
View Related
Jul 27, 2011
I have Cisco router 2800 IOS and Version is (c2800nm-spservicek9-mz.124-6T5.bin) (IOS Version 12.4(6)T5).I wnt to install firewall.
View 1 Replies
View Related
May 10, 2011
I have 5 routers. Four routers are: c2801-IPBASEK9-m v 12.4(24)T2. One router is a C2800-IPBASEK9-M v 12.4(24)T3. so, it appears that the IOS on all 5 routers is very similar, the only difference is the T3 at the end of the version and that 4 are 2801s and one is a 2800. What is very wierd is the 4 2801 have the embedded scripting language "tclsh". The 2800 does not have tclsh. If I issue the command: tclsh on the 2800, I get:
Center-GW#tclshTranslating "tclsh"
% Bad IP address or host name% Unknown command or computer name, or unable to find computer addressCenter-GW#
View 1 Replies
View Related
Dec 15, 2012
I am using Solawinds syslog and trying to get our Cisco routers send syslogs to our syslog server. I followed the procedure on Configuring Cisco Devices to Use a Syslog Server from [URL] Our Cisco swtches are all sending syslog messages but not the routers. I compared the config with our access switches but can't seem to find the problem:
Sample router config:
service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname WWF-RT1boot-start-markerboot-end-marker!security authentication failure rate 10 logsecurity passwords min-length 8logging buffered 4096logging rate-limit all 10logging console critical!aaa new-model!!
[Code] .......
is there a command that prevents the router from sending the syslog to the server?
View 2 Replies
View Related
Apr 23, 2013
I have been tasked to connect a 2800 router to our ASA 5510 firewall. The router will be used as a VPN router. It will terminate two different VPN connections to two different networks. I can setup the 2800 VPN config but what would I need to do to setup the firewall. I am using an extra Ethernet port(it has 4) to directly connect the router. The FW has our outside internet connection, the DMZ, and our inside LAN connection. I do not have a lot of experience with Firewalls and I do not want to create a security breach while trying to set this up!!
View 5 Replies
View Related
Jun 20, 2011
We have a 2800 router which is configured as a Voice Gateway. For some reason, yesterday we started getting DFM notifications like the one below. We seems to get an active messages every few 10mins or so, then a few minutes later the message will clear before becoming active again...
EVENT ID = 0009NK2
ALERT ID = 0000QTM
TIME = Tue 21-Jun-2011 16:06:50 BST
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = XXXXVG1
MANAGED OBJECT TYPE = Routers.
View 1 Replies
View Related
Oct 16, 2012
Needing to upgrade IOS on 2800 router from c2800nm-advipservicesk9-mz.123-14.T7.bin to c2800nm-advipservicesk9-mz.124-15.T13.bin. I noticed ther are several other files on the old code that may needed for booting up router but Im running low on memory. The other existing files are ;
c2800nm-advsecurityk9-mz.124-3i.bin
securedesktop-ios-3.1.1.45-k9.pkg
sslclient-win-1.1.4.176.pkg
Do I need these files for the upgrade or can i delete them when upgrading to 124-15.T13.bin. ?
View 5 Replies
View Related
Jan 20, 2012
I have setup DMVPN and EAZYVPN on one router. Tunnel interface on Spoke one and Spoke two are up/up and show crypto ISakmp sa shows both tunnels are in idle. However, tunnel to Spoke one(10.10.1.1) keep bouncing on and off(see below). Every 30 sec or so, the tunnel gone back to IKE phase while tunnel for spoke two(5.5.5.1) still leave active. THe configuration on the HUB side is the same for both spoke!! show crypto ipsec sec shows both side has the same life time(IOS default). Could that be an IOS debug on the spoke one?
Hub :
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 15.1(3)T2, RELEASE SOFTWARE (fc1)
HUB#sh crypto ipsec security-association
Security association lifetime: 4608000 kilobytes/3600 seconds
Spoke one:
Cisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(8), RELEASE SOFTWARE (fc1)
[code]....
View 1 Replies
View Related
May 22, 2013
I have Router 2800 series Global nating is configured on it.
ip nat inside source list 111 interface Dialer1 overload
!
access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.0.0 0.0.0.255
access-list 111 permit ip 192.168.1.0 0.0.0.255 any
My object is that i want give internet access only for few users ip E.g IPs addresses from range 192.168.1.0-10 can acess intenet access other all are deny.How i do this with ACL .
View 2 Replies
View Related
Oct 3, 2011
Any problem/issue with using 28VDC to power the 2811 router. The spec calls for a 24VDC power.
View 1 Replies
View Related
Nov 1, 2011
I want to download the iOS update to my Cisco 2800 Series Routers and Cisco Catalyst 2960 Series Switches and leave them there till im ready to install them. Is this possible?
View 1 Replies
View Related
Jan 10, 2011
i have Router 2800 series we are using leased line Connection 8 Pubilc IP.One IP Config in Router FE0/0 IP 101.102.148.91 and FE0/1 192.168.0.0 Local IP.I have 6 Web Server. How to Config other 7 IP address on Web server in the router 2800 series.
View 6 Replies
View Related
Jun 29, 2011
I have a comcast business class cable modem and am trying to connect it to my cisco 2821 to route only certain types of traffic.
View 3 Replies
View Related
Aug 19, 2012
I have 2800 series router which is directly connected to ISP. How can secure the router from outside access; I am totally new to the security concepts.
View 2 Replies
View Related
Oct 25, 2012
I have a pair of router Cisco 2800 running in HSRP, now I want to configure one sub interface with another sub net, Will my current IP on physical interface work or do I need to create two Sub interfaces for each network. Do i must need encapsulation on sub interface
Current Config:-
Router 1:-
interface FastEthernet0/1description Connect to LAN_SW1 Gi1/0/1ip address 192.168.1.13 255.255.255.0no ip redirectsduplex autospeed autostandby 1 ip 192.168.1.1standby 1 priority 90standby 1 preempt
Router 2:-
interface FastEthernet0/1description Connect to LAN_SW2 Gi1/0/1ip address 192.168.1.3 255.255.255.0no ip redirectsduplex autospeed autostandby 1 ip 192.168.1.1standby 1 priority 110standby 1 preempt
For second network I do not require HSRP
Router 1:-
interface FastEthernet0/0description Connect to LAN_SW1 Gi1/0/1no ip addressduplex fullspeed 100
[ code]...
Router 2:-
interface FastEthernet0/0description Connect to LAN_SW2 Gi1/0/1no ip addressduplex fullspeed 100
[Code]...
View 3 Replies
View Related
Jan 1, 2013
we have a 2800 series router functioning as our internet router and it will only forward packets to addresses with host entries in the routing table even if the network is directly connected.
View 18 Replies
View Related
Jun 3, 2012
I have a 2800 with one Gigabit interface connection to our Lan and the other interface connected to the internet with a public IP address. Now I'd like to setup the router to resolve both internal and external DNS requests. Thus requests like www.google.co.za and LocalLanPcName should be resolved to their public and private IP's respectively. [code] When I ping any name the only DNS server that is ever queried is 192.168.1.200 (it does resolve internal name correctly though).
None of the other servers are attempted to resolve the name. It does not matter if I specify a FQDN or not.
How do I setup the router so that my internal resolution is handled by 192.168.1.200 and .201, while external resolution is handled by 41.160.36 and .37. Or alternatively, how do I configure it to at least try all 4 specified name-servers for resolution, and not fail after trying the first one unsuccessfully.
View 9 Replies
View Related
Aug 16, 2012
I am trying to add WCCP to be configured for websense. My first option seems to be either purchase an IPServices license for the stack of 3750E switches, but i am thinking this will require us to license all three switches in the stack. The second option i am looking at is to do the WCCP configuration on the 2800 router we have on the edge. The problem is both Gig ports are in use, one going to the firewall and the second going to the ISP. My first question would be, which option is better in terms of manging as well as cost of implementing it.The second question is, if WCCP on the router is a better option, what is the add on module i should be looking to get to add the additional ports to hook up the Websense cache.
View 8 Replies
View Related
