Cisco WAN :: 2800 Router Can't Have Tclsh But 2801 Does With Same IOS
May 10, 2011
I have 5 routers. Four routers are: c2801-IPBASEK9-m v 12.4(24)T2. One router is a C2800-IPBASEK9-M v 12.4(24)T3. so, it appears that the IOS on all 5 routers is very similar, the only difference is the T3 at the end of the version and that 4 are 2801s and one is a 2800. What is very wierd is the 4 2801 have the embedded scripting language "tclsh". The 2800 does not have tclsh. If I issue the command: tclsh on the 2800, I get:
Center-GW#tclshTranslating "tclsh"
% Bad IP address or host name% Unknown command or computer name, or unable to find computer addressCenter-GW#
View 1 Replies
ADVERTISEMENT
Jan 2, 2013
I believe that I should have started with this issue because I cannot run tclsh on a multilayer switch. When I try to execute "tclsh" command I receive this message: SWITCH#tclsh
Translating "tclsh"...domain server (X.X.X.X)
% Unknown command or computer name, or unable to find computer address
The equipment is a MLS C3550 - Version 12.2(35)SE3
Is there any wrong with the IOS version?
View 8 Replies
View Related
Jul 23, 2007
I looked but could not find any information on what's the use of the USB interface on my 2801 router. I saw something about Cisco USB memory module and eToken by Aladdin. Is this interface restricted to Cisco and Aladdin only?
View 17 Replies
View Related
Aug 4, 2011
I have a Cisco RV110W small business router setup at my home. It has one of those HTML GUI interfaces, check the boxes, etc.., to get things working. Basically, your typical home router with VPN. I have enabled the VPN, it's PPTP, added the password, and now it's automagically configured! I can successfully VPN to my home with a Windows7 client. Here's my problem, I now need to VPN into my home router with a 2801. Is this possible? Everything I found on the subject has only been to setup a Cisco IOS router as a VPN server or tunneling to another IOS router. No examples using an IOS based router as the client.
View 3 Replies
View Related
May 29, 2012
We have one Router Cisco 2801 at the customer site and facing issue of having very High CPU coming to 99%.CPU utilization for five seconds: 99%/28%; one minute: 99%; five minutes: 98%
View 2 Replies
View Related
May 31, 2011
I'm having trouble setting up a Cisco 2801 as an internet router between our firewall & our ISP.I've setup FastEthernet0/0 as the WAN port & FastEthernet0/1 as the LAN port. I've setup a default gateway pointing the next hop (the ISP),when I plug in a pair of laptops configured to mimic our IP scheme, I'm able to ping thru, but when I put the router between our firewall & ISP I'm not able to get out to the internet (can't ping google) I can still ping the next hop.,Our old router died, so I am unable to pull up its configuration. Here is the code I'm come up with so far.
View 6 Replies
View Related
Dec 26, 2012
I need some clarification if it is possible to do an IPL connection between Cisco 2801 (T1) to Cisco 1841 (E1) via Ethernet (2801) to Serial (1841).
I am unable to find any documentation about this and I need to connect our network to an offshore network.
View 2 Replies
View Related
Jan 27, 2013
I have to configure failover on both router. if one get fail then the other router should be dial.Physical connection
•1. Two routers (Cisco 2801) are connecting with splitter through RJ 11 port.
•2.Only one ISP link is coming in splitter.
Requirement: As per as customer requirement. He wants redundancy with in both 2 routers. If one goes down then the other router come up. And same configuration on 2801_R2 router. I am planing to do HSRP on our lan network (2801R1,2801R2 ehternet interface which connected to switch). from switch i will create two default route with (next hope) virtual ip address.
View 6 Replies
View Related
Mar 7, 2011
I have a 2801 router with a HWIC-3G-cdma card that I have inherited from a predicessor. How to use a cellular card on a router and need to get this thing up and running. Any example config that I can see or point me in the right dorection to get this up and running? I have the cellular card set up as Cellular0/1/0 on the interface, I assume that that was done by default, and it has an IP address. The Static Route of 0.0.0.0 0.0.0.0 Cellular0/1/0, in the config with only 2 other interfaces as being direct connection. But that is as far as I recognize. Do I need to set up a router protocol? Which one? How do I use the cellular card? Do I need to have an ISP connection?
View 1 Replies
View Related
Mar 20, 2012
I have just received Time Warner Cable and get 16Mbps down from them directly through their modem (motorola DOCSIS 2.0 modem- SB5101) to my PC (using speedtest.net). When I then connect TWC's modem through my 2801 router on fa0/0, the download rate I get is considerably slower (on the order of 3-4Mbps via same testing method). What am I missing?
Here is how the passthrough interface is setup:
interface FastEthernet0/0
bandwidth receive inherit
ip address dhcp
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
I have attempted removing bandwidth command - nothing changed with it not there. I have also hard coded the speed and duplex to 100/full to no avail....
Other possible relevant configs:
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 dhcp
access-list 1 permit 192.168.1.0 0.0.0.255
Basically this things is wide open... for testing but the download speed differential is perplexing to me.
View 10 Replies
View Related
Dec 26, 2012
I need some clarification if it is possible to do an IPL connection between Cisco 2801 (T1) to Cisco 1841 (E1) via Ethernet (2801) to Serial (1841).
I am unable to find any documentation about this and I need to connect our network to our overseas office.
Our side uses the 1841 router and our provider has set-up our E1 connection to be via Serial interface while on our overseas office uses the 2801 and will connect via the T1 card, which by the way does not have any serial interface ports just ethernets.
So far checking on how to configure this, I am unsure on how the connection will happen since the info that I got is that T1 does not have the option to hold an IP address (also unsure on this though). With this in mind and that the 2801 does not have serial interfaces, does that mean that IPL connection would be via the available Ethernet ports?
View 11 Replies
View Related
Apr 9, 2013
I want to block access of some clients from the vlan1 to acces internet blocking their MAC address. How can i do this?
I have tring this way:
access-list 700 deny mac address 0000.0000.0000
access-list 700 permit 0000.0000.0000 ffff.ffff.ffff
int fa00
bridge-group 1 {input-address-list 700 output-address-list 700}
but it's not working .
View 1 Replies
View Related
Apr 12, 2011
I have problems with the Router 2801.When i give the command show processes cpu, the command show me that the router is working in 98%.
I have vlans like voice vlan and others, I have one 20 Mb Wan Link and I redirect all traffic from my lan to this link and when i browse in internet or i do downloads the router goes to 98%, when i don't make it the router processes goes down.
I thought be problem with hardware, but i exchange to another router and the same problem happened.Before this situation, I had one link with 12 Mb and nothing happened, when i exchange this to the 20 mb link the problems starting.
View 3 Replies
View Related
Feb 7, 2012
I have one problem doing a ping to a router lan interface, I have 3 routers (2801) connected between each other (separated 1 mile each), the link is established trough microwave signals (connected to the 2801 fast ethernet interfaces), every router has a connection to a LAN. One of them is located at headquarters.Last thursday I replace one of the router with a cisco 2901, i configure the router with the same configuration that was on the 2801, i power up the router and the 2 link were up without problems.One day after the noc called me to tell me that after i replace the router they can't ping the router IP lan interface on the new 2901 (before the replacement the ping was sucessful). I called one user the lan connected to that 2901, and they can do a ping to the router's LAN IP address.
I can ping the 2901 IP wan interfaces, I can ping the LAN users ip address, but i cannot ping the router LAN IP address, from my desktop, and neither the 2 routers 2801 connected to the 2901.I show the configuration on the 2901, I couldn't change it because i didn't have time to do that, but i'll change the configuration to use ipsec tunnels.The configuration as you can see, has a crypto map, but the acl used by the crypto map, only permits the interfaces ip address, so i think that doesn't work, so the traffic doesn't get encrypted, but i don't know if that is the problem why i can't do a ping to the lan interface. [code]
View 5 Replies
View Related
May 14, 2013
i hace a VPN configured between two Cisco ASAs, but I have a problem to reach a network behind a router 2800.
View 7 Replies
View Related
Feb 28, 2012
I'm using for a company network a 2801 Cisco Router. This router has 2 FastEthernet Interfaces connected on 2 ISP's and one VLAN for internal users. What acl should i use if for example one client from the lan is using a torrent client to download from the internet. I want just to specify a maximum download speed or to block that client to access the internet when it's trying to download something that can affect other clients from the LAN.
View 2 Replies
View Related
May 3, 2011
I have problems with router 2801, the version is
Cisco IOS Software, 2801 Software (C2801-ADVENTERPRISEK9-M), Version 12.4(24)T4, RELEASE SOFTWARE (fc2)
When i start a download the processes of the router cpu stay in 99%/97%. When i'm not doing a download the processes stay in 3%/0%. I have one 20 mb link to Wan.
I did the troubleshooting seeing the this document :
[URL]
View 8 Replies
View Related
Feb 11, 2013
Im using a 2801 router with a nat configuration.
The issue im having is the nat seems to be allowing only one machine at a time through the nat.
the range i am testing is 192.168.243.0
The firmware is c2801-spservicesk9-m
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[Code].....
View 5 Replies
View Related
Jun 18, 2012
The HWIC-2CE1T1-PRI card isn't supported on a CISCO2801 router
View 7 Replies
View Related
Feb 9, 2012
The goal is to add a 2801 router between a DSL modem and a switch and obviously still access the internet. I connected and configured as explained below and the results are:
- I am able to ping internet addresses from the 2801 router
- I am not able to ping internet addresses from userlaptop but I am able to ping LAN gateway (192.168.254.254)
I cannot understand why the internet requests from the user laptopuser are not routed to the internet but the router itself can access the internet.
INTERNET====DSLmodem=====CISCO2801=====unmanagedSwitch=====userlaptop
DSLmodem:
non-bridged mode and does the PPPOe authentication.
WAN interface: Dynamic IP address assigned by ISP
[Code].....
View 14 Replies
View Related
Feb 21, 2012
simple configuration of a 2801 Router. I have 2 internet providers with static ip's connected to F0/0 and F0/1 and one Vlan for LAN area. I would like to configure the router to use one primary line and just in case to use the back-up line. [code]
Now if detects that it hasn't cable link on the FastEthernet interfaces it's working. I'm using 2 wireless gateways to acces the internet each one connected on the 2 FaEth for simulating the providers. If i simulate an issue on the provider ( i've removed the sim from the wireless gateway) it doesn't pass on the second isp.I haved trying to configure with "IP Service Level Agreements " for failover / load balancing but the command "ip sla" is incomplete. I can't make an update of the IOS because the customer do not have an Service Contract with Cisco.
View 15 Replies
View Related
Mar 29, 2011
I have setup an eBGP session to a Cisco 2801 CE router. The BGP session establish, however, the session keeps resetting after 90 sec which is the BGP keepalive holdtime value.
On the PE router I found that the OutQ doesn't clear = 22 when doing a "sh ip bgp x.x.x.x summary" - Session reset at 1:30.When I filter the amount of routes advertized to the CE neighbor with the "neighbor x.x.x.x prefix-list out" - I see the OutQ clear = 0 and the BGP session remains up.
-Number of NRLI advertized without prefix filter = 172
-Number of NLRI after filter = 52
why the OutQ doesn't clear.
View 1 Replies
View Related
Oct 17, 2012
want to ask something about configuration ruter 2800I already have a usb to DB9 | DB9 to RJ45but i have a problem like the image below
View 19 Replies
View Related
Dec 21, 2011
How to add a wic-2t card on router 2800
Had the card as follows
I want to know routr 2880, such as the following picture
View 1 Replies
View Related
Sep 19, 2011
I am operating a 2800 series Cisco router. The router is working fine except that I am not able to SSH into the router. I have checked the running config with cisco's documentation and every line is correct. Prior to me getting this job they did an update and think they have corrupted the a certificate key for SSH.
Any command to generate just the SSH key and not all the other keys that would cause bigger connection issues.
View 1 Replies
View Related
Feb 23, 2012
I have 2 2800 series routers configured the same, but with different subnets. One works fine, the other the client can't obtain an IP, and hardcoded, cant ping.
I ran DHCP debug and I can see the router assigning the IP, and I see and ARP entry that matches the MAC of the client.
*Feb 24 11:33:55.915: DHCPD: Sending notification of DISCOVER:
*Feb 24 11:33:55.915: DHCPD: htype 1 chaddr 000a.e40c.d232
*Feb 24 11:33:55.915: DHCPD: remote id 020a0000ac10760101000078
[Code].....
View 3 Replies
View Related
Jan 4, 2013
find the firmware file for 2800 series router? I need to upgrade the firmware to this router to get adsl annex M mode to work.
View 1 Replies
View Related
Nov 17, 2011
We have a cisco 2801 router in class which has a disabled password recovery. We tried almost everything, we cannot get into ROMmon and the break sequence doesn't work in any program (hyper terminal, putty, teraterm pro).
Here is the log from hyperterminal:
System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)Technical Support: [URL].Copyright (c) 2004 by cisco Systems, Inc.PLD version 0x10GIO ASIC version 0x127c2801 processor with 131072 Kbytes of main memoryMain memory is configured to 64 bit mode with parity disabledReadonly ROMMON initializedPASSWORD RECOVERY FUNCTIONALITY IS DISABLEDprogram load complete, entry point: 0x8000f000, size: 0xc100Initializing ATA monitor library.......program load complete, entry point: 0x8000f000, size: 0xc100Initializing ATA monitor library.......program load complete, entry point: 0x8000f000, size: 0xd49718Self decompressing the image :
[code].....
View 5 Replies
View Related
May 7, 2013
I have a 2801 router that I am replacing with a 2911. I know the ports on the 2911 are Gigabits and the 2801 are Fe. I read where the IOS would not support backup and restore on each other . I am attaching a show ver on both routers. I need to know if backup and restore would work and or what other changes would need to get done.
View 1 Replies
View Related
Jul 6, 2012
I was just recently hired in my company, we have an sf300-24p switch but I cant find the console cable for it, I think it needs a female to female db9 serial cable, all I have is a DB9 serial to rj45 console cable for the 2801 router, also I cant find the IP address of the sf300 switch, it is directly connected to the 2801 router, I issued a show arp to the router but didnt find the switch's IP add for web access, to sum it up I have no way of configuring the switch, is there any way to find the IP address of the switch? It also dosnt show on show cdp neighbors?
View 13 Replies
View Related
Oct 16, 2012
We have recently implemented some QoS on our routers and i have noticed that the CPU usage has risen enormously as a result.
I checked the CPU Processes and found that the avg values are 50% usage. This seems rather high considering that only 75% of our edge routers have this feature enabled.
Our main router is a Cisco CISCO2911/K9 (revision 1.0) with 487424K/36864K bytes of memory. Our edge routers are either 2801 models or 881 models.
This is our first implementation of QoS and would like to ensure that it is working properly before implementing other QoS rules. Here is a copy of the config on the 2911 router:
class-map match-all Citrix
match protocol citrix
class-map match-all Print
match protocol printer
class-map match-all C-Coolingata
[ code]......
Here is the config on our edge routers:
class-map match-any Citrix
match access-group name Citrix-ACL
[code]....
As you can see we have different link speeds at different sites based on their size, location etc. How to be able to confirm that this config is correct?
View 3 Replies
View Related
Jul 3, 2011
Currently we have a cisco router 2801 for Wireless Internet connection. And we are going to have another ISP that can provide us Fibre Optic internet connection rather than wireless.My question is that can we use this router for fibre optic internet connection? how do we go about this? what is the maximum bandwidth that the router can support?
View 8 Replies
View Related
Mar 12, 2013
I am trying to install Radius server for a cisco 2801 router. I am not able to configure it properly.
View 2 Replies
View Related
