I am unable to get my 4402 and 2504 to pair in mobility, I made short video to explain my issues.also do not worry there is no propritary information in this video, I am working on a lab that does not mirror any production networks.
View 6 RepliesI recently add a second CT5508 to the network, but when I tried to add the first 5508 to the mobilty group I received a message like this:
"error in creating member"
I've tried different mobility names, via GUI, via CLI and always the same error.
I've verified twice or more than twice connectivity issues or any error on the entering the MAC and IP of the controllers, everything is fine.
I'm using version 7.0.116.0
We have a WLC 4402, with interface Management, AP-Manager, and only the ap-manager interface is enabled for dynamic AP Management, how can i enable the dynamic AP Management for management interface also. Because i couldn't access WLC from via wireless, only able to access it via wired.
View 15 Replies View RelatedI am in the midst of trying to update the controller firmware of a cisco wireless lan contoller 4402, and having some issues getting the file to transfer to the controller. i am currently running verison 5.0.148 on the controller and attempting to upgrade to the latest version of 7.0.230 and for whatever reason it continues to not transfer. I have tried all 3 methods of cli, gui and using wcs software. all the no avail , I have tried tftp32 and 3cdaemon with the same results.
The error that i am getting from 3cdaemon is got socket timeout aborting code 10054, failing at 66MB transfered. I increased the timeouts both on the wlc and the tftp client to no avail
the error i get on the wlc is Code file transfer failed - Error while writing output file
why I dont have QoS roles under the QoS tab?
View 4 Replies View RelatedWe have other APs that associate w/o issue AIR-LAP1141N-A-K9. However our 1 1310 is having issues.. The Controller log shows:
2012-08-29 21:16:51 local0.error 172.16.10.70 ITCNJ1WC01: *spamApTask0: Aug 28 21:17:15.038: %LWAPP-3-DECRYPT_ERR5: spam_crypto.c:293 Error decrypting packet (using old key) from AP d4:8c:b5:15:3c:04 (session identifier a3ddb9c5)
2012-08-29 21:17:33 local0.error 172.16.10.70 ITCNJ1WC01: *spamApTask0: Aug 28 21:17:17.037: %LWAPP-3-DECRYPT_ERR: spam_lrad.c:3642 The system is unable to decrypt image data message; AP d4:8c:b5:15:3c:04
2012-08-29 21:17:33 local0.error 172.16.10.70 ITCNJ1WC01: *spamApTask0: Aug 28 21:17:17.037: %LWAPP-3-DECRYPT_ERR: spam_crypto.c:735 The system is unable to decrypt LWAPP packet; AP d4:8c:b5:15:3c:04
[code]....
I have configured 3355 NAC appliances in HA pair everything is running fine.But not able to Login through GUI (Virtual IP) which is used during the configuration of HA pair.
View 1 Replies View RelatedI have a few AIR-AP1242-E-K9 AP that I have upgraded to LWAPP, after the upgrade the AP's don't join the controller. But some AIR-AP1232AG-E-K9 on the same site joins without any issues.The controller is: AIR-CT2504-K9, SW: 7.0.220.0. [code]
View 8 Replies View RelatedI recently setup a 2504 WLC that has two primary WLANs (internal and guest) which get their IP addresses from a central DHCP server using the local router's broadcast forwarding. Things seem to be working well for the internal wlan, but clients on the guest wlan don't seem to be getting IP addresses. If I give the client a static IP they are able to communicate across the wlan okay.
It is worth noting that I am using LAG between the controller and router and this guest wlan is really just a regular wlan (with PSK) that has an access-list applied to force it to the internet only. The access-list should be allowing dhcp requests through, but in any case, I removed the access-list and it made no difference.
Here is a debug client for a machine connected to the guest vlan (vlan 33). The internal wlan is on the 10.10.10.0/24 network (same as wired and same that the AP's are connected to) and the guest wlan is 10.33.0.0/16. I don't understand why I am seeing the dhcp request come from the internal vlan/ wlan first and it gets an IP address on this network. I then see a request on the guest wlan/vlan at which point it appears to get a valid IP address on the guest network (10.33.0.0), but the client never sees this. [code]
While trying to connect to WiFi at remote sites APs, the connection is getting time out.User are getting error as 'Unable to connect to <WiFi-SSID>' The APs at corporate office are functioning properly and user are able to connect to the APs.
Wifi Controller: 2504 Software ver: 7.3.101.0
Authentication 802.1x
I have installed the Phone Remote software [URL] on the torch and playbook but am not able to pair them together.The FAQ's and directions have been followed painstakingly but have not any success. My router is knowledge is basic but read through the manual and have been searching the net for answers. I have uPNP enabled and no firewall.
View 2 Replies View RelatedWe have a pair of N7K distribution switches connected to a pair of N7K Aggregation switches.We run vPC on both pairs of n7k's.
-n7k-d1 has two interfaces in a Port-Channel connecting to n7k-a1 & n7k-a2. (PC1)
-n7k-d2 also has two interfaces in a Port-Channel connecting to n7k-a1 & n7k-a2. (PC2)
My problem is that Spanning-Tree is blocking PC2 and all traffic from n7k-d2 is traversing the Peer-Link before reaching the Aggregation layer. Is this the best design for connecting two pairs of n7k's with vPC or if a better design would be to connect all 4 links into the same Port-Channel and vPC?
When I try to add new MAC entrys to the WLC I get the following message unable to add mac entry to database, reached max size the problem is when I look at the stats there is only 386 MAC entry and the databse size was set to 1024 entry..The work around was to increase the size of the database to 2048.Is there any why to clean up the database?
View 2 Replies View RelatedI'm trying to setup WLC for LDAP to authenticate the users. I have all the components required according to cisco's document. WLC4402, LAP1142N, 2008 AD serving as LDAP.
I'm configuring according to the document and also trying same settings from other users on this forum who (seems to) have got the WLC-LDAP up and working. My problem is that I'm receiving the below debug message on the controller and there is nothing on the internet on this error:
*LDAP DB Task 1: Apr 28 10:05:35.903: LDAP server 1 changed state to IDLE*emWeb: Apr 28 10:09:21.046: aaaLdapServerStateSet [1] changed state to 'DISABLED'.*emWeb: Apr 28 10:09:21.046: aaaLdapServerStateSet [1] changed state to 'ENABLED'.*LDAP DB Task 1: Apr 28 10:09:21.052: ldapTask [1] received msg 'CLOSE' (4) in state 'IDLE' (1)*LDAP DB Task 1: Apr 28 10:09:21.055: ldapClose [1] called lcapi_close (rc = 1008 - Invalid client handle)*LDAP DB Task 1: Apr 28 10:09:21.055: LDAP server 1 changed state to IDLE
I'm getting this error regardless of the authentication type, any username and attributes. So it makes me think WLC is not even trying to bind to LDAP. If the error was invalid credentials or something mismatch or something, it gives me some information to base my troubelshooting but I just can't find information on this (rc = 1008 - Invalid client handle) message.
I have a 4402 and recently I have not been able to access the device via the service-port interface. The service-port has an IP Address and it is connected to an access port in the Vlan which I am coming from, however it cannot even ping it's gateway, which as mentioned is within the same network. When I am at the console of the controller I can ping the service-port interface IP that I have assigned, just nothing else.
View 4 Replies View RelatedFor unknown reason I cannot get WLC to authenticate correctly with ACS 5.2. it's very strange in the sense that when I checked the log. ACS authenticates and authorized the WLC 4402 but I cannot log to the WLC. login screen appeared, if I typed user name it jumped to Controller> user: password:
No matter what I typed (internal or external users) nothing seems to work. This is my frustration, I have no problem authenticating routers and switches except WLC 4402.
Receiving the following syslog message from a 4402 WLC:
%CAPWAP-3-AP_DB_ALLOC: capwap_ac_db.c:145
Unable to allot AP entry in database. We receive this message about once a minute on average. I can't find any documentation saying what it is. It looks like a database error, which makes think it might be a memory issue or an issue with having too many AP's on the WLC. However, that controller has less than 30 AP's on it.
I've got a router on which I run a backup/media/print server, a couple of computers and a voip box. My router has only four ethernet lan sockets which are thus all occupied by the above, but I need to attach at least one further device b
Secondly, could a splitter such as >> this one << do the job? I'm guessing this basically split a single 4-pair ethernet connection into two 2-pair ethernet connections.
1) Is it possible for 2 WLCs installed in seperate data centres with L3 seperation to be joined in a mobility group? We will have aps in the branch offices split between controllers so we want to make sure roaming work ok. Also all guest access should be anchored to data centre 2.
2) in flexconnect local switching mode, do I need to create flexconnect groups if I'm only using radius servers in the data centre with no requirement to use local radius as a backup?
It seems the 7.3.101 version Mobility group peer cannot up,: refer to the attach,
Peer 1: version: 7.3.101
Peer 2: version 7.0.98
Peer3: version 7.2.103
Today we got new two WLC for Anchor use, and config the mobility group, but it's failed and cannot up, the ping is ok.
Can I configure a mobility groups between 2106 Wireless LAN Controller and 5500 Wireless LAN Controllers?
View 8 Replies View RelatedI have two 5508, no anchor, only one SSID with internal web authentication using radius server.Under "Configuring Mobility Groups", Cisco guide says: "If a client roams in web authentication state, the client is considered as a new client on another controller instead of considering it as a mobile client".
I understand that if a client that has already autheticated via web roams between two LAPs that are associated with different WLCs, it has to reathenticate.
I have to WLC's a 4402 and 5508 in a mobilty group. they are both running 7.0.116.0. They are configured to use Web Authentication. We are having complaints that Users are having to re-authenticate when moving around the office. My theory is they are moving from one WLC to the other and then requiring to re-authenticate.
View 5 Replies View RelatedDo you know if the new 2500 series controller supports things like mobility groups? Could I use 2 of these and do inter-controller roaming. Also do you know if this would work with a 2106 controller and a 2505 controller or are they 2 completely independent controllers only knowing about their own APs??
View 12 Replies View RelatedI read the configuration guide about the 7.3 release. And I figured out that you will need a hash key for establishing a mobility group relation between a controller and a virtual controller. The 7.3 release for the 5500 series works fine for me.But the latest release 7.0.235.0 for the wireless lan controller series 4400 does not have a functionality to add a hash key while creating a new mobility group member.The command "config mobility group member hash" is totally missing. How to establish a mobility group between a 4400 controller and a virtual then ?
View 2 Replies View RelatedAfter upgrading my 5508s to 7.2.110.0, they are reporting mobility data path errors to one of my WiSMs running 7.0.235.0.
I get these messages on the 5508s reporting that it can't send a ping to the affected WiSM:
*ethoipSocketTask: Aug 08 21:15:41.175: %ETHOIP-3-PKT_RECV_ERROR: ethoip.c:341 ethoipSocketTask: ethoipRecvPkt returned error
*ethoipSocketTask: Aug 08 21:15:41.175: %ETHOIP-3-PING_RESPONSE_TX_FAILED: ethoip_ping.c:312 Failed to tx a ping response to <ip address>, rc=5
But maybe there is another clue because I also see in the same log these errors referencing the same WiSM:
*bcastReceiveTask: Aug 08 21:15:45.310: %LOG-1-Q_IND: mm_dir.c:1969 Failed to recreate the SSH Rule for <ip address>.
*mmSSHPeerRegister: Aug 08 21:15:44.829: %MM-1-SSHRULE_CREATE_FAILED: mm_dir.c:1969 Failed to recreate the SSH Rule for <ip address>.
Why is the controller trying to SSH to another controller? Was some SSH related feature added to 7.2 that has been accidentally enabled?
for some reason our wlan-controllers were build up to be standalone instead of beeing one mobility-group. I would like to change this in order to use all features of HA.
let me describe our scenario: two WLCs 5508 running SW ver. 6
- same subnet
- both are running in master controller mode
- different hostnames, ip-addresses, etc
- all settings for WLANs and AP-groups (exept the APs themselves in these groups) are the same
- in total at this moment we are running around 100 LAPs configured one half on WLC#1, the other half on WLC#2
I don't know exactly why, but when that setting was installed, someone already configuredHA for each accesspoint... e.g.:
- AP#1 primary WLC#1, secondary WLC#2
- AP#2 primary WLC#2, secondary WLC#1 but without WLC#2 knowing the configuration for AP#1 it makes no sense, correct?
so my question is: how should I do the migration in the best way?
is it easy as:
- disabling master controller mode on WLC#2
- configuring both WLCs into one mobility group
--> WLCs are negotiating their configurations for the APs
deploying a DMZ wireless controller and I have a question regarding remote wired LANs. My 602OEAP APs support 1 or 2 of their LAN ports as being accessible across the DTLS tunnel.This works fine when they register across internet right to my internal WLC. However, now that I'm implementing a DMZ controller for this purpose, how will this work? I dont see the option for the Remote Wired LAN to be linked to a mobility anchor.Some of my users have printers connected to the LAN port on their 602OEAP and I need to maintain this functionality once I move their APs to the DMZ controller.
Software versions: 7.4.100.0
DMZ Controller: 2504
INT Controller: 5508
I have Cisco Wireless Lan Controller 5508 with 35 (3600 Series Access Points. Do i need to purchase Mobility Service Engine for this or no need? Do i need WCS server for this or no need?
View 1 Replies View RelatedI have a 4400 and a 5508 WLC in the same location We want to be able to roam between ap joined to both the 4400 and the 5508 using only one ssid
Do I only need to create a mobility group and add both WLC then create only one WLAN on one of the controllers and it will be shared across bot WLC.
I have a customer buys 12 x WISM and build up a mobility, when I add the final WLC to mobility, it prompts that there mobility group has reached the max of mobility member, but the total member is 23, according the configuration guide, it should be allow to 24 member, do I hit some bug? My using version is 7.0.98.0.
View 5 Replies View RelatedI read the configuration guide about the 7.3 release. And I figured out that you will need a hash key for establishing a mobility group relation between a controller and a virtual controller. The 7.3 release for the 5500 series works fine for me.
But the latest release 7.0.235.0 for the wireless lan controller series 4400 does not have a functionality to add a hash key while creating a new mobility group member.
The command "config mobility group member hash" is totally missing.
how to establish a mobility group between a 4400 controller and a virtual then?
I have 2 controllers as below one with 6.0 version and other with 5.2 version AIR-WLC4404-100-K9 6.0.202.0 AIR-WLC4402-12-K9 5.2.178.0 GUEST..Control path between controller flaps.All mobility anchors on wlan index 7 are down.All mobility anchors on wlan index 3 are down.Control path to mobility member x.x.x.x is down.No problem observed when i have software 5.2.178.0 on both the controller.
View 35 Replies View Related