I am trying to connect a 2nd router to an exsisting router in my home, the location of the 1st router is in a location where it is hard or impossible for other places in the house to cath the wifi.
View 4 Replies
My New comcast cable modem will connect to the internet, as i am connected to it by ethernet right now, but my netgear router will not recognize it and get a link to the internet to get my existing LAN back up.
View 3 Replies View RelatedI'm trying to set up my desktop using windows xp and a wireless belkin n150 f9k1001 router to connect to a wireless network that is being sent from a mac with some tp-link router so that I can connect to the internet the isp is bell aliant. I'm not entirely sure how to go about this or if it's possible I've tried the worthless tech support and setting it up as an access point but I don't really know what im doing.
View 1 Replies View RelatedCan I connect another GT704WG to my existing GT704WG router?
View 1 Replies View RelatedI have a DIR-301 router connected to a Virgin cable modem. It provides the Internet to the PC and wirelessly to other devices (like my iPhone, my wife's Android phone and my iBook) with no problems.I recently bought a Sony TV that has an ethernet port on the back. The Sony wireless dongle they offer (UWA-BR100) is stupidly expensive, so I thought I'd try a wired connection via an access point.I bought another DIR-301 from eBay, as it was advertised as an access point which I thought would give the TV an Internet connetion.I've tried everything I can think of and have been advised, but I can't get a connection via the TV.
View 2 Replies View RelatedI'm trying to connect a PC to an existing wireless Modem which has a laptop already using it. I've somehow deleted the wireless connection symbol from the bar at the bottom.
View 9 Replies View RelatedI have an existing wireless network, and wish to add a Netbook to it. The Netbook can detect the network, but will not join it. It says the signal is strong, but still will not join the network. The computers cannot detect the Netbook wirelessly either, although network discovery is turned on.
View 5 Replies View RelatedI have a spare usb HDD and wish to connect to an existing network switch (rj45 connections) if it works on a gigabyte network all the better
View 3 Replies View RelatedHow can I connect a vista laptop to existing wireless home network with other 3 [COLOR=#000096 !important][COLOR=#000096 !important]xp[/COLOR][/COLOR] machines.I followed googled info but keep chasing my tail as all effords end trying to make an internet connection. [code] is Negear wired & wireless capable in which 2 PCs are wired & an Acer netbook wireless connected, all 3 XP machines.
View 1 Replies View RelatedI need to connect a pc desktop and A linksys PAP-2T voip adapter to an existing wireless network(home network).
View 7 Replies View RelatedI just bought a new wireless router and I currently using my older dlink di-524 wireless router in my home. Reason in buying a new one is because currently the dlink router is in the family room use to be a garage and my wifes imac is in our bedroom the couple rooms down not next door or anything, and the imac and even our smartphones when in our beedroom the connection gets disconnected then reconnected etc etc, basically signal strenth is low intialy when connected to the router.
View 1 Replies View RelatedI would like to add a second router to an existing modem that would supply data from an IP camera to an external source. I want this router to have no interaction with the existing router/network.
View 1 Replies View RelatedI have a dir-825 that I am currently using. After building an addition I can connect...or when I do get a connection it is weak.. can I add a wireless dir-615 that I already have as a way of boosting the signal into this addition?
View 1 Replies View RelatedHow do I remove the existing antenna from my N+ router...?
View 3 Replies View RelatedA dlink 615 router so im trying to set up a new network. So downstairs i have a netgear g router, this is then hardwired to a switch, from there i have another cable running upstairs and into my d link router.I am using snow Leopard OS, and using VMWare was able to use the quick setup on the associated disc but could only reach the stage where i connect my ethernet to router before it would display an error message stating it was unable to find a router.I then tried manually setting up the router online using
192.168.0.1
but was unable to get a working connection running over the wireless and i was only able to give this page when hardwired to the d link router.
I have an E1000 router and recently moved to a basement apartment where the only internet access comes from a single Ethernet cable running out of a router upstairs. I can connect to that network (it is family) but ideally I would like to connect my router and create a second network so that I can connect my printer and other devices independently of the upstairs network.
View 2 Replies View RelatedMy ISP comes in via phone line to modem then to wireless router.I want to run 200' direct burial line to WAP so that I can access wireless internet at the far point. I have modem and wireless router. what do I need to do the create the distant wireless access?
View 2 Replies View RelatedMy wife has a home office with her office computer connected to our modem via a cisco router. Our home computer is connected via this router as well. I want to add a wireless router (netgear) so I can use my laptop anywhere in the house.
View 1 Replies View Relatedhow to connect a new computer wifi using an existing router ? Have attempted many times but without success.
View 4 Replies View RelatedI purchaseda trendnet 692 GR router because I understood that I would be able to stream from let's say my computer to my TV that is up the stairs. Here is the problem. I did get the router to use my existing 2Wire 2701HG modem.Yes I can connect my Samsung 6100 to the wireless 2Wire but I thought the trendnet setup would work the best.I and Trendnet support set up my router and media bridge and the two do work but my tv won't work through the MB. I have connected to the network but the next part of the connection (the internet) won't connect. I have tried different IP settings that I thought would connect but nothing so far has worked.Also I have taken a 50' ethernet cablefrom the trendnet router to the tv and I do get a connection.I have also taken a laptop through the media bridge and connected to the trendnet router.The customer service at trendnet can't take this to the next level(which is a$40 one session professional service)
View 19 Replies View RelatedI moved into an apartment complex that has wireless already set up, but it is so slow! I heard that if I connect with my own router then the speed will be faster. How do I configure my router for that? I have a netgear WGR614v.10 and am using a macbook pro.
View 2 Replies View Relatedhow to connect a new computer wifi using an existing router ?Have attempted many times but without success.
View 1 Replies View Related[code] I have tried to configure this setup and have had no luck,and in the proccess have learned enough about networking to be really dangerous to my equipment. Is the problem DHCP? or incorporating MAC routing with IP routing? I'm pretty sure I've managed to program one of my keyboard buttons into a World Delete Function,.
View 3 Replies View RelatedI am trying to hook a second computer up to run off my belkin router?
View 1 Replies View RelatedAt work we have an existing wireless network with with a lot of wireless pc's and devices connected to it.. We want to however connect 2 desktop pc's to the same network so that they have internet access also. These 2 desktops have been connected to the wireless router via wireless dongles, but due to some office arrangements we have to move them to a different office in the building where there is network ports available.I plugged in a D-Link 5-port Gigabit desktop switch to the network point in the office the 2 desktop pc's are moving to and tested it with my laptop (with wireless disabled) to see if everything is working.The LAN seems to be working fine, but when I want to connect to the internet.. it seems something is wrong.
View 1 Replies View RelatedI want to edit existing wireless network in DLINK router. But I can't find any option to do it. If I go to "wireless settings" option, it shows the three options "wireless network setup wizard", "add wireless device with WPS", "manual wireless network setup", but I cannot find any option to edit the wireless network that was already set up.
View 3 Replies View Relatedi need to connect a linksys e1000 to an existing dlink router. i have tried several solutions that i have found on the internet, but none have worked. i need DETAILED instruction tailored to e1000 specifically because i am having trouble with dhcp definitions as i have not done this in years. i can get it to work, but i have to maintain security and everything i have done still allows me through to dlink router.
View 6 Replies View RelatedHave netgear wireless internet router from ISP and both pc and laptop have wireless internet access but are not networked together. Don't need to network the two but wish to add wireless printer so can print from each computer. Have ethernet cable connecting wireless printer to router. Will computers now communicate (seperately) with the printer for software installation and subsequent printing use?
View 2 Replies View RelatedI have a working 3800 router which runs on bgp pretty well. Existing setup has 2 serial ports for the bgp and 1 gigabit port for the LAN.Now, i want to add another 3800 as a standby router making it clustered - ACTIVE/STANDBY via hsrp protocol.
1.) What are the implications in adding another 3800. Do i need to reconfigure the ip addresses on my serial? or just the LAN
2.) Are there any additional requirements like firmware versions etc?
I just bought a new wireless router and I currently using my older dlink dir-524 wireless router in my home.eason in buying a new one is because currently the dlink router is in the family room use to be a garage and my wifes imac is in our bedroom the couple rooms down not next door or anything, and the imac and even our smartphones when in our bedroom the connection gets disconnected then reconnected etc etc, basically signal strength is low initially when connected to the router.
View 8 Replies View Relatedhow to add a WRT54GS V1 wireless router (Router B) into my existing WRT54G V2 Wireless network (Router A). The main router WRT54G V2 router (Router A) is located upstairs and is the link to the ISP (Internet).
- DHCP active
- Wireless MAC filter is enabled with only approved MAC's
- Wireless SID Broadcast is disabled
The secondary Router WRT54GS V1 (Router B) will be located down stairs with no Ethernet cable between the two routers.
- Will need this secondary router to connect to the existing wireless network Router A wirelessly.
- Will need to have internet access.
- Will need to have the wired ports to have internet access as well. Needed to connect the Home A / V receiver to update A / V firmware.
Added a wireless router to our office here so that people with laptops could get on the net without having to physically plug in. Right now it is ok, but the router is acting as it's own DHCP server instead of our server here assigning out the IP's.
The main gripe I have is I can only login to the router through my phone and not through my computer. How can I achieve this. We have multiple offices that all connect through a VPN. I would like our sys admin to access the router at his location as well.
Do I just turn off DHCP on the router and thats it? The model is Netgear WNDR4500.
How do I get forgotten password For netgear router free without upsetting existing settings ?
View 1 Replies View Related
