I want to edit existing wireless network in DLINK router. But I can't find any option to do it. If I go to "wireless settings" option, it shows the three options "wireless network setup wizard", "add wireless device with WPS", "manual wireless network setup", but I cannot find any option to edit the wireless network that was already set up.
View 3 RepliesI moved into an apartment complex that has wireless already set up, but it is so slow! I heard that if I connect with my own router then the speed will be faster. How do I configure my router for that? I have a netgear WGR614v.10 and am using a macbook pro.
View 2 Replies View Relatedhow to add a WRT54GS V1 wireless router (Router B) into my existing WRT54G V2 Wireless network (Router A). The main router WRT54G V2 router (Router A) is located upstairs and is the link to the ISP (Internet).
- DHCP active
- Wireless MAC filter is enabled with only approved MAC's
- Wireless SID Broadcast is disabled
The secondary Router WRT54GS V1 (Router B) will be located down stairs with no Ethernet cable between the two routers.
- Will need this secondary router to connect to the existing wireless network Router A wirelessly.
- Will need to have internet access.
- Will need to have the wired ports to have internet access as well. Needed to connect the Home A / V receiver to update A / V firmware.
Added a wireless router to our office here so that people with laptops could get on the net without having to physically plug in. Right now it is ok, but the router is acting as it's own DHCP server instead of our server here assigning out the IP's.
The main gripe I have is I can only login to the router through my phone and not through my computer. How can I achieve this. We have multiple offices that all connect through a VPN. I would like our sys admin to access the router at his location as well.
Do I just turn off DHCP on the router and thats it? The model is Netgear WNDR4500.
I'm trying to set up my desktop using windows xp and a wireless belkin n150 f9k1001 router to connect to a wireless network that is being sent from a mac with some tp-link router so that I can connect to the internet the isp is bell aliant. I'm not entirely sure how to go about this or if it's possible I've tried the worthless tech support and setting it up as an access point but I don't really know what im doing.
View 1 Replies View RelatedI have a WRT54G that has served us well for several years, but I needed a network connection in another part of the house, both wired for TV, and wireless for downstairs. So I ran an ethernet cable through the house and connected it to my new E1200. It's connected to Port 1, not the Internet port. The TV plugs into Port 2, and my Apple TV to port 3. So far so good, TV and Apple TV appear to work fine. Wireless is where I'm having problems, the wireless signals between the two routers appear on Wifi Analyzer I'm using. Both appear strong in signal for a second, then they disappear, then they appear again for a second, then they disappear. So the wifi's signals appear, then disappear and this cycle continues.
The WRT54G is setup with DHCP, channel 6.
IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 DHCP Server: Enabled Start IP Address: 192.168.1.100 End IP Address: 192.168.1.149
The E1200 DHCP is disabled, channel 11, 20mhz.
Router IP Address: 192.168.1.2 Subnet Mask: 255.255.255.0 DHCP Server: Disabled Start IP Address: 192.168.1.1 (DHCP disabled) End IP Address: 192.168.1.50 (DHCP is disabled)
I've tried both routers named the same, and then tried 2 different names. I've rebooted them as well after making changes.
I have an existing wireless network using a Cisco/Linksys WRT400N wireless router (which in turn is connected to a cable internet provider). I need to extend my wireless coverage and so purchased a Cisco/Linksys E1000 to act as an additional access point. Purchased from BB, the local 'geek squad' rep instructed me to follow the users guide for the set up. After login into the admin service on my E1000, I followed the 'Advanced Routing' instructions and disabled the 'NAT' option and subsequently enabled the 'Dynamic Routing (RIP)' option. Everything worked like a charm to this point, but now I'm stuck. What steps do I need to follow to allow clients to log onto my wirelss network via the E1000 (secondary access point)? I've established WEP security keys on the WRT400N (primary access point) and want to use the same network security parameters on the E1000.
View 9 Replies View RelatedI have WRT54GS I can't view the setting tab to check or change. It seem the tabs are light in color and I click on them. I did have a virius which I got rid of. I have removed the linksys software and re installed
View 1 Replies View RelatedI have just purchased a new ASUS Laptop for my wife.We are currently running two destop computers on a D LinK Router. How do I go about including the new computer on the network wirelessly?What do I need to purchase to make the transition easiest? The two desktops are running Windows XP Professional, the new system is Windows 7.
View 4 Replies View RelatedI entered some QoS settings and now when I load the QoS page I get this Javascript error message in Firefox.Error: missing ) after argument list Source File: [URL]. Line: 100, Column: 47 Source Code: QosList[0] = new QosEntry('0','3','0','Kathy's Mac','3', infor);
Basically, the Javascript chokes on any computer name that you enter that has an apostrophe in it. As a result, I don't have access to add or edit any settings on that page. Seems like a major rookie mistake, especially for a major network device manufacture.
I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
I cannot edit or save file on a network drive. When saving or editing it says it cannot save and gives a read only error. I have tried to create a new folder and place files within but I still get the same error over and over again. When I check out the read only tab it comes back again.
View 1 Replies View RelatedI have a Western Digital "WD 6400AAC External MYBook that I can not create shares on, nor edit the public folder. In each case, I receive the message "Error on page". I've updated my firmware, several time, to the latest build. I've formatted the my WD drive using the router and my computer, and each time I try to create a share, "Error on page" shows on the bottom left corner of the page and nothing happens. I tried several other drives and the results are the same.
View 1 Replies View RelatedAt home I have a D Link DSL-2640R wireless adsl router/modem in my downstairs office.I would like to use the cable which goes to upstairs of the house to link to some sort of extra router or switch in order to provide more network ports upstairs.
View 1 Replies View RelatedA dlink 615 router so im trying to set up a new network. So downstairs i have a netgear g router, this is then hardwired to a switch, from there i have another cable running upstairs and into my d link router.I am using snow Leopard OS, and using VMWare was able to use the quick setup on the associated disc but could only reach the stage where i connect my ethernet to router before it would display an error message stating it was unable to find a router.I then tried manually setting up the router online using
192.168.0.1
but was unable to get a working connection running over the wireless and i was only able to give this page when hardwired to the d link router.
What is the procedure for adding a new computer to an existing wireless network? Both computers are running on Vista and two on Windows 7
View 1 Replies View RelatedI already have a wireless router but the signal strength doesn't seem to penetrate brick walls well. I want to add another wireless switch to access the same Internet but am not sure exactly what I should purchase. I know I don't want another router, so what should I buy?
View 4 Replies View RelatedI have a DIR-301 router connected to a Virgin cable modem. It provides the Internet to the PC and wirelessly to other devices (like my iPhone, my wife's Android phone and my iBook) with no problems.I recently bought a Sony TV that has an ethernet port on the back. The Sony wireless dongle they offer (UWA-BR100) is stupidly expensive, so I thought I'd try a wired connection via an access point.I bought another DIR-301 from eBay, as it was advertised as an access point which I thought would give the TV an Internet connetion.I've tried everything I can think of and have been advised, but I can't get a connection via the TV.
View 2 Replies View Relatedwe already have an existing network tru a switch hub and other two pc access internet through a wireless router and this wireless router is connected to the switch hub together with the other pc our problem is we cant share files and folders to the other two pc using wireless..How can we share files to other two pc.
View 3 Replies View RelatedI have Comcast internet and a DLink DIR-655 router. I have a laptop, Playstation 3 and 2 Blackberrys hooked up on my wifi. I also think my neighbor is using or trying ot use my wifi.I need a software program or piece of hardware that will allow logging of the URL's that are requested through my router.I currently use OpenDNS, and the service itself is pretty good. However, it doesn't tell which user is requesting which URL, and if a website is visited with 10 ads on it, it also shows the URL's for the ad hosting company, even though they didn't actually type that URL in.
View 5 Replies View RelatedI would like to have the best networking on my cyber with a D-Link router, IDU and a D-Link switch so as to connect more than 10 Computers, and send me a mapping of the computers and Manual.
View 2 Replies View RelatedHow can I connect my computer to an existing wireless network?
View 1 Replies View RelatedI have a wireless set up at home and recently had to replace my DSL modem (due to my cat knocking over my coffee cup and spilling coffee on my old modem) I have managed to connect to the internet directly through the modem, but want to connect wireless. How can I connect my new modem to my old wireless network?
View 3 Replies View RelatedI have an existing wireless network, and wish to add a Netbook to it. The Netbook can detect the network, but will not join it. It says the signal is strong, but still will not join the network. The computers cannot detect the Netbook wirelessly either, although network discovery is turned on.
View 5 Replies View RelatedI have an existing network in a 300 year old structure. There is a base router from which there are 3 wired (ethernet) lines to parts of the structure. Due to the structure itself (near 2 ft thick walls - masonry) the wireless from the base router reaches only a short distance. I would like to "extend" the wireless reach using those 3 existing runs. So - can I add 3 more routers or should I go with Wireless Access Points or what else would work?
View 5 Replies View RelatedI have been deploying various wireless AP's in my network for years and years. We have a Cisco network with at least 30 different subnets, and we use EIGRP as our dynamic routing protocol. I have always wanted our AP's to act like a switch instead of a router. So I have always disabled DHCP, assigned it a static LAN IP address, and plugged it into my network on one of its 1-4 switchports, and not using the "internet" port. This goes for all my routers (varying Linksys/Cisco models, and even a couple old Netgears).
I have been realizing lately that once I get an AP build and sent out to the remote location (on a different subnet), I can usually no longer web into it. I am in the middle of deploying an NPS server to do 802.1x authentication, and I'm realizing that the E2000 I'm using cannot ping or see the NPS server which is on a different subnet. So, I'm sure I'm missing something.On this E2000, I have disabled the SPI firewall, turned off NAT, enabled dynamic routing, etc. But I can't ping devices on another subnet from the E2000. I also can't ping url... or other URL's from the E2000. It will not resolve them. (My DNS servers are on another subnet... same subnet as the NPS server). [code] Is there something I'm missing on my wireless APs? Do I need to configure my Cisco routers to use RIP in addition to EIGRP?
I have an 802.11n/g wireless network throughout my house. I also have several ethernet ports. I want to use the ethernet port to connect to the network and extended the existing wireless network (same SSID). I know AirPort devices from Apple can do this but I wanted to know if anything else could as well. It is too slow when I try to wirelessly extend it (not using ethernet at all).
View 4 Replies View RelatedI need to know what to look at to get wi-fi connection to my existing linksys wrt54gs2 v1 network
View 1 Replies View Relatedive got 2 laptops on my wireless network and have just bought a pc. it dosnt seem to be finding my connection so i cannot get it onto my wireless network?
View 1 Replies View RelatedI have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.
View 5 Replies View RelatedMy entire floor receives wifi from a D-Link router box. For the first 4 months, my laptop was able to find and connect to our wifi fine. Last night the internet crashed. All of my German housemates have internet again, but my laptop does not show the network anymore. My wireless card picks up all the other signals in range, but not our router's. I can only get internet with an ethernet cable.
View 1 Replies View RelatedAdd wireless conection that can't see network. I have an existing working hard wired network. I want to add a wireless connection that has access to the internet, but not to the other devices on the original network.
View 2 Replies View RelatedHow can I connect a vista laptop to existing wireless home network with other 3 [COLOR=#000096 !important][COLOR=#000096 !important]xp[/COLOR][/COLOR] machines.I followed googled info but keep chasing my tail as all effords end trying to make an internet connection. [code] is Negear wired & wireless capable in which 2 PCs are wired & an Acer netbook wireless connected, all 3 XP machines.
View 1 Replies View Related