I cannot edit or save file on a network drive. When saving or editing it says it cannot save and gives a read only error. I have tried to create a new folder and place files within but I still get the same error over and over again. When I check out the read only tab it comes back again.
View 1 RepliesWhen I going to save a php file I got an error message "U don have permission to save it here"
View 1 Replies View RelatedIs it possible to edit the hosts file on an ACS 1121 server running ACS 5.2? Our problem is we have a single domain with multiple domain controllers at different sites. So when the ACS server tries connecting to the domain it randomly picks a domain controller which it can't connect to thus causing it to fail.
View 5 Replies View RelatedWe have 4 computers that all run new versions of Windows 7. Each have been connected to a Mapped Network Drive and they all connect fine to the network. Dragging files throughout windows works fine. When we try to attach a file from the network in the browser (as in a GMail message) or upload a file with FTP it disconnects us from the network and from the Internet.This only happens with 2 of the 4 computer.
View 2 Replies View RelatedHow do I restore the previous version of a file I overwrote? I accidentally overwrote a file that is on a network. How can I get the previous version back?
View 3 Replies View RelatedHaving problem locating why when a user logs on to their profile, their personal network drive shows everyones personal drive file and they have acces to all files.This is a major security concern as uppper management files are then accessable.It is random, may not always be displayed, or always occur on the same user.The User drive normally displays.
joed on \serverusers$ (H:)
When this takes place the users name is replaced with just Users Users on \serverusers$ (H:) (This can sometimes change to Z drive)
This then exposes all user drives.This does not run from a script but is used in AD under the profile drive letter. Have tried to:Rebuild profile in Active Directory. (New Profile)Re Build user profile on workstation>Rebuild Operating system on Workstation.Change drive on the user profile in AD letter H to Z.Have also tried on a different workstation.
I want to set up a file to save some of my e-mails. I am on google g-mails and use Windows xp Is there any way that I can transfer these e-mails to a file so that I can read them at a later date and also when a new one comes just transfer it to this file.
View 2 Replies View RelatedHow do I save/copy all of the router configuration entries onto a memory/flash usb drive? I did not configure the router myself (out of town when purchased). I have already downloaded the manual for that router and I want to understand exactly what she (person who configured router) did and identify any mistakes she might have made. Once downloaded, I assume I can print out all configuration settings.
View 3 Replies View RelatedI'm trying to save a configuration file on my 2960-48PST to a FTP server.
Unfortunately it doesn't work. What different steps I should follow ?
The software version is 12.2(50)SE5.
I work as a System Administrator for a small company. Can i share a CD drive to all the computers in my domain. Or does this require any additional software to do all this. Because i tried to do it normally by sharing that CD drive and by which it was also available in my network. But when i was trying to access that it says "The drive is not ready". We use Windows operating system in our network. I even tried to google this but i could not find any exact answer for this till now.
View 3 Replies View RelatedI have a US Robotics 8700 NAS (4 bay). I have it running Raid 5. I'd like to buy a bigger shell with more bays to expand the drives. Can I do this easily? Is it hot swappable? If I put the 4 bays in say an 8 drive array, can I add additional drives and will the existing drives work in a different NAS
View 2 Replies View Relatedi have shared 4 network drive in my client computer but sometime when we leave computer on for a couple of hours and then try to access the drives then it shows the message "network drive is not available" the only way to access the drive is to restart computer.
View 1 Replies View RelatedI'm running a windows lan that connects 3 computers and a shared storage external hard drive. The whole network, including the external hard drive is connected by ethernet back to my adsl modem/router. I want to convert the external hard drive into an ftp server to enable secure file sharing on the internet by allowing remote access (for the purpose of downloading files) to anyone that I offer a username and password to.The external hard drive is a Western Digital World Edition (blue light)I believe it's a 2008 model.The adsl modem/router is a Billion Bipac 7300(G) RA.Is this doable?
View 3 Replies View RelatedI want to edit existing wireless network in DLINK router. But I can't find any option to do it. If I go to "wireless settings" option, it shows the three options "wireless network setup wizard", "add wireless device with WPS", "manual wireless network setup", but I cannot find any option to edit the wireless network that was already set up.
View 3 Replies View RelatedI'm having an issue with a Cisco 2811 ISR Router. Sh ver command output lists the correct ios that the router used for booting and it says that the ios is stored in flash but when i give "sh flash" command it doesn't display the ios file. Maybe the flash is corrupted or damaged in some way? In the attached file is the output from the "sh ver" and "sh flash" commands.
View 6 Replies View RelatedI was hoping if someone could give me some suggestions on this matter. I have some IT knowledge but a bit rusty.I currently have 25 pcs all running web based applications on their own. So filesharing is a headache. I decided to setup a small file server for the office.This is what I need the server to do.1) Internet connection comes through server protected by a firewall and then distributed to the 5 pcs (star topology)2) Print and file sharing.3) application sharing (accounting software)4) fax facilitiesMy question to you all:How do I go about setting this up. What do I need (OS, softwares, etc)How do I secure the internet and distribute it to the rest.witch, router, etc)
View 1 Replies View RelatedI need to transfer a large file(about 1GB) from my pc to FTP server.I tried with C# code in .net, it stated that "buffer size has been exceeded or queue is full".I tried using cmd prompt also, but it transferred about 380 MB and a notification was displayed as "Netout : Software caused connection abort, 451 Failure writing to local file".
View 1 Replies View RelatedI have three pier to pier computers (two Win 7, one XP). I have a new server on the way (HP Mediasmart EX495 with Window Home Server). What is the best way to gather all the files from the three machines and move them to the server and eliminate dedundancy? Is there an efficient and recommended procedure, or should I just block out a few days and hunker down for the big task...
View 4 Replies View RelatedRight now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?
View 1 Replies View Relatedwhat is the difference between network drive and map drive?
View 1 Replies View Relatedi'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies View Related#1 windows 7 computer has a wired connection and #2 windows 7 computer has a wireless connection. When at #2 and trying to save a file to #1, the save time may be about a minute. When doing the same thing from a computer #3 with windows xp, the save time is a few seconds. Tried safe mode with networking. Same thing. Tried disabling remote differential compression. No change. The three computers are in the same workgroup.
View 3 Replies View RelatedI have a user that is trying to save an excel speadsheet that is located in a shared folder on a server, the user can open the file and edit ok but when they try to save the file the progress bar pops up but just hangs then a message pops up to saying "file not saved". They are using Windows 7.The user is new and I have just set up their account so thought it might be permission issues but I have logged the user in on two other different machines (1 win7 and 1 WinXP) and they have no problem at all.
View 7 Replies View RelatedI have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I wanted to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username.
What is causing this and is there a way to get around this? Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
I'm trying to see if I can fix my friend's NAS which apparently has some pretty important data on it that wasn't saved anywhere else. They actually had the Geeksquad look at it and they've come to the same conclusion I have so far, but I figured I would ask the internet before I gave the thing back to them and said Geeksquad was right.
Anyways, they have this 5 drive RAIDed NAS which apparently just stopped showing up on their network. I borrowed it from them to see if I could figure it out. It turns on just fine and my router assigns it an IP address, but the IP address just takes me to a blank LaCie dashboard screen. It's weird because it's clearly running it's web server because it's just a gray background with an empty white box and "(c) LaCie 2010" at the bottom. No content at all.
Additionally, I tried installing the LaCie Network Assistant on my home computer and it says it cannot find any network disks. I've tried the "wake up a device" where I enter the mac address, but that doesn't do anything.
All the lights are solid blue on the front and over all the drives so it doesn't appear a drive has failed or something. Even so, that wouldn't really explain the blank dashboard right?
My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies View RelatedI am connecting the router to a corporate network that assigns "real" IP to it (DHCP). Then I have 3 computers connecting to this router (local IP 192.168.1.2-4).Assuming I want to access a network drive named "ADrive" (on the same corporate LAN) from any of those 3 PCs, how do I do it? ("\ADrive" does not work, neither does replacing the network drive name with its IP, cannot ping either - it's like I'm on a totally separate network).
View 3 Replies View RelatedI'm currently in college, and do most things with my laptop, and I have wifi just about everywhere. It has a generous 500 GB of storage, but I'd like to store non-essential files on, an external hard drive. However, lugging around 3 TB of storage isn't exactly feasible, and with my experience with my current 1.5 TB portable drive, me running around everywhere with it bouncing in my bag is just going to abuse it until it stops functioning (which it has...)[URL]
View 3 Replies View RelatedIn previous versions of LMS, I navigated to RME - Devices - Inline Edit to increase the snmp timeout. I haven't been able to locate the same process in LMS 4.2. Where I can locate this feature?
View 1 Replies View RelatedHave upgraded WCS to 7.0 due to a Mesh network feature we needed, but now see I can no longer edit the AP migration templates. The interface allows me to create or delete them but the command dropdown box does not show an Edit option. So now for every AP I want to migrate I need to create a new template before I can select the AP's and migrate them. I still need to migrate about 220 APs....
Looking though the function it tells me to click on the Migration Template name. However neither in MS IE nor Firefox this works, there is no link activated.
We have a user that works from home and connects to our network through a VPN when she needs to access files on our server (mapped as a shared drive.)I created a new shared folder on that same server and she can't map a drive to it. It just continuously prompts for username/password.She is running Win 7 Pro, server is Server 2008. The server is on a domain, she is not. She already has a mapped drive to a different folder on the same server as well as to a folder on another server. We are trying to map using the IP address (\IPFolder) and have tried putting the username as IPUsername and just Username with no luck. Tried mapping with net use. Found some stuff online about changing some registry values - tried that. Change the network type from "Home" to "Work" and still no luck.
View 14 Replies View RelatedWe have a network drive and it's ip is 192.168.1.3. We have created different users with different permissions for each folders. I have a problem in mapping the network drive in each computer. I can map each folder in them though.I access the drive using run command \192.168.1.3 and it displays all folders. I map the folder but don't know how to map the drive itself.
View 2 Replies View RelatedA program is installed on our server, and I run it on my pc by mapping a network drive to the server's hard drive.I'm sure you all know this procedure.Anyway, I can access the shared drive on the server from my pc, browse, create and delete files on the server, all fine.But, when I try to map the drive, it says:"Windows cannot find 'WEaXA.EXe'. Make sure you typed the name correctly, and then try again."And its only on my pc this happens, on all the other pcs its working fine. And from my pc I can map any other shared folder/drive.
View 1 Replies View Related