D-Link DIR-615 :: Orange Globe On And Not Functioning?
Jun 7, 2011
The D-link dir-615 is not working.The modem is working perfect, because its the internet that im using right now (its connected directly to my laptop, so i know its the router for sure) But i want to make the internet on my modem wireless, but the D-link router has the orange globe light turned on (as im typing it still has the light on) and i just dont know whats wrong with it. I have already tried reseting it like 2 times, and it still doesn't work. When i connect my router, all it does is acquire the network address, and it just stays there, so no ip address will be detected... I might just buy a lynksys router, d-link sucks. This router was bought years ago by the way. It hasn't been used since like now.
It isnt the computer, i tried disabling the firewall, and reconnecting, but it just stays in 'renewing ip address' (the same things happen with all of the other computers that try to connect to it in my home) I click on the wireless icon and then on 'support' and next to IP Address it says "Invalid Ip Address"... The globe still remains orange on the router..
View 13 Replies
ADVERTISEMENT
Dec 29, 2011
I have a DIR 601 with a actiontec GT701D modem.When I shut down my computer the globe on the router goes from green to orange.The modem people say their modems are always on Am I missing something on the DIR601?why?
View 5 Replies
View Related
Mar 21, 2011
I recently (Jan 2011) bought a new DLink DIR-600 Router for my home use. It was working excellent for last two months and suddenly last Monday all hell broke loose. I have a WiMax connect and have a POE box. I plugged in the cable from POE box into my router and it used to work fine. But now, the globe indicator on the router box is not turning green. It remains yellow. When I remove the POE cable from router and plug it directly to my laptop, it works fine.
View 2 Replies
View Related
Mar 22, 2011
I've been using my Router For 2 months now, It's been working properly since. But yesterday, It was left turned ON and the Power and Globe LED's were orange/yellow. As I restarted the router (unplugged, waited for 1 min.) Only the Power LED was green, all the other LED's were OFF.
View 1 Replies
View Related
Jan 27, 2013
My Dlink DCS-942Ls had been updated to the latest firmware both 1.12.1608WW and 1.12.1628EU. (I grouped them into two firmware devices). They are all H/W version A1, agent version 2.0.15-b11. If I setup time to automatic time configuration and sync with NTP servers ( all from drop down list and Thailand NTP server time1.nimt.or.th) , they did not work and I must set time manually every times I power off and on these IP cameras. I knew that this issues has been raised for long times and still exist in the current firmware.Simple way to eliminate this problem is specifying NTP server into IP number. ping your national NTP server URL and then get the IP address , e.g. time1.nimt.or.th has IP 203.185.69.60 , or ntp1.dlink.com has IP 61.67.210.241. I have tested many ways and the results can be comfirmed that URL NTP letter cannot sync time but IP number can do. I also has a DAP-1360 Repeater mode and test with its "System Check" ping test, the result are success either URL NTP server name and IP number. NTP protocol is different to ping test. I'm not sure that which parties (ISP, DNS, Router, IP camera device) should fix this error. I decided to specify NTP server with IP number to all network devices from D-Link. Minor risk may occur if a national NTP server change its IP number.
View 1 Replies
View Related
Mar 24, 2013
Yesterday, my DIR-600 are working fine, but the led of the power and the WAN are orange, now, only the power led is orange, i can't enter in 192.168.0.1
View 1 Replies
View Related
Mar 5, 2011
what should to do if ever or incase something happen during flashing firmware.like power turn off, or you quit the installation, or wrong .bin file.what i did is upgrade the firmware dlink dir 615 3.03 ww c2 to ddwrt factory.bin but before that i have save the original .bin from 192.168.1.1 for incase restore original setting.i did not follow the instruction that get latest firmware from dlink but what i did is restore or use emergency to reback the 3.03 ww c2 .bin from my dlink that i was save from original setting. and it didnt work out it failed the router totally stopped working and functioning. only the dlink name light is on. even the reset button dont work or dont blink.what should we do for this kind of fault is there another way to return the setting back? no ethernet and wifi so no way of communicating with router. the router ethernet and wifi has stopped working. but the computer homw network is detecting the router whenever i plug it in computer through Ethernet but the local area network when plug to router is disconnected. the router wifi is not blinking either.
View 1 Replies
View Related
Mar 11, 2013
I have a D-LINK 601 router which has been working fine. I was told by a friend that it is not password protected. I think that I have set it up now with an adm password. The router and the DSL modem is still connected as before, but the Internet LED blinks orange.
View 1 Replies
View Related
Feb 8, 2012
I've got a DIR-825 RevB Firmware V2.06NA on a static IP wan connection routing to a SBS2008 server and 10PC's. The server is serving mail, web, and files. Router has virtual servers setup for http, https, smtp, imap, imapssl, smtpssl, pptp, remote desktop, and a few others.
Everything works fine, but the routers https forwarding stops running periodically about half an hour after reboot. The server's working fine, but it doesn't see the https request, it looks like the router is trying to serve the 443 request itself. After a router reboot everything is back to normal.
I've replaced the router with another dir-825 and it has the same issue.
View 3 Replies
View Related
Mar 11, 2012
I reseted my router because I couldn't go in the login so now eveything is green except the earth looking thing next.the power it is orange Cause I really need my internet
View 1 Replies
View Related
Feb 9, 2011
I have a question concerning the Internet LED Status Indicator. The manual states "A solid light indicates connection on the Internet port. This LED blinks on data transmission".My router seems to be working fine but the Internet LED on my 615 is blinking orange.Reason??
View 3 Replies
View Related
Nov 5, 2011
i have a PPPOE type of connection for my modem and just now my router is blinking both lights Orange and blue at the same time....but the internet is still connected..
View 14 Replies
View Related
Nov 24, 2011
I upgraded then downgraded from 2.00 to 2.03 back down to 2.00, and whenever I'm doing about 600kB/s+ it resets itself. Drops connection drops wireless, wired, and the globe internet icon goes Lambert/orange. I've reset the router to default and it still does that. What could be the cause?
I've done a lot of changing around, disabling unicast, changing from WPA Auto to WPA2, etc etc, I just changed the router to Netgear WGR614 v7 and it works perfectly fine now.
View 14 Replies
View Related
Feb 17, 2013
-Region : Poland
-Model : TD-W8951ND
-Hardware Version : V5
-Firmware Version : 5.0.0 Build 120522 Rel.23978
-ISP : Orange/TPSA
Is there any way to change web interface / firmware from orange version to blue version? Blue version has more options and better "System log" presentation page.
View 2 Replies
View Related
Dec 18, 2012
Just got several of these Cisco WAP121 AP's and today had a nightmare with one of them. On one of our areas with no broadband access we have installed the "Globe Surfer 3+ 3G Router" which incorperates its own Wireless AP.
I needed to get decent wireless access further down the building, so the idea was to use the WAP121 and setup WDS with the Globesurfer. No matter what guides I followed I could not get the WAP121 to talk to the Globe Surfer for internet access.
using the WAP121 and a Third party router ?OR, is this a case that the WAP121 wont work with a 3rd party router ?
View 4 Replies
View Related
Jan 27, 2013
I've recently bought a new PC (I7) to replace my old one. My main task was to get most of my files across and set up my new PC as the main computer on the home network. Currently my machine has a printer connected to it which I wish to share with all on the network. I've attached a screen cap of the network as displayed by my modem/router. 2 computers (my PC's) connect via ethernet and the other 2 laptops wirelessly. All computers (except my old PC) run Windows 7 - the old PC runs Win XP SP3.
What I can do so far is transfer files from my old to new PC. Each computer on the network (except the XP machine) can see each other but cannot access each other and despite network discovery + file and printer sharing on, cannot see the printer across the network. I've been doing a bit of research to try and solve my problems but am only getting so far. If there is a resource you could point me to that would be great as I'd like to develop a good understanding of how to manage the network.Here's is an IPCONFIG report on my main machine:
[code]
View 8 Replies
View Related
Sep 14, 2012
I have an ASUS M4A785-M MB with an on-board LAN and all of a sudden stopped working yesterday. I have it connected to a 4-port D-Link network switch which has one other computer connected, and the switch is hard-wired to my wireless router.
Here are the trouble-shooting steps I've tried:
- uninstalling/re-installing the driver
- tried using different wires.
- by-passed the switch
- used the wired connection with the other computer
- tested the wire for my troubled computer on the other computer and it works fine
- pinged the loop-back IP address (127.0.0.1) and it tested ok
- bought a new NIC and still no connection
When I go to Network and Sharing Center, it shows my Home GRoup but then has the bid red X from the Home Group to the Internet.
View 1 Replies
View Related
Mar 17, 2011
I have one router 1841 in which i configured PBR for internet traffic from LAN. I hv two ISPs few server are configured for ISP1 and few for ISP2.I planned to shift my existing setup at 2901 G2 router. when I am configuring the same config on this router so traffic is passing through only from one ISP not from other, if I troubleshoot so I see that the interface which is connected with ISP2 is not getting any input/output packet.
Config is here:
==========
interface FastEthernet0/0
description ****** ISP2 ******
ip address 203.xx.xx.110 255.255.255.248
[Code].......
View 1 Replies
View Related
Feb 8, 2012
I recently removed trojan horse and malware using AVG. This was successfu,l but when I rebooted the machine it will not recognise any network connections, sound etc or operated software such as excel.ll the devices appear to be installed but won't work. When I try to open Intel it shows a message 'No supported wireless adapters available in the system'.
View 9 Replies
View Related
Jun 18, 2011
My router was not functioning well so I decided it might be a good idea to reinstall the driver package via the admin upgrade page. Since then it doesn't work at all. The power light flashes constantly now.
View 9 Replies
View Related
Nov 7, 2012
I bought a pix 515 to play with and i upgraded it to the farthest release 8.0(4) it was at 7.22 and the web interface and ASDM is not working. do i need to upgrade the ASDM? when i run the launcher i get a fatal error :
handshake_failure.
I just updated the IOS, did i need to save certain things? activation key's maybe???
View 3 Replies
View Related
Jun 2, 2012
why ip flow egress is not functioning on 7600?When I do "sho ip cach flow", I can see only inbound flows.
View 5 Replies
View Related
May 28, 2011
I have a Dell Inspiron n5010. Earlier bluetooth was functioned properly. But today bluetooth icon is not displayed on the tray. could not find my bluetooth devices while searching also not able connect from my my Bluetooth device. I have updated the driver from Device Manager.
View 10 Replies
View Related
Jun 21, 2011
We currently run 7206 routers with VAM cards and are able to configure the devices to perform stateful failover of tunnels from router to router. When moving to the 7604 with 15.1 IOS there are not any examples of how to set up the stateful failover of the tunnels between devices. We have the devices in the SSO mode are not able to understand how to get the redundancy between the devices functioning.
View 1 Replies
View Related
Dec 30, 2012
I'm having a problem with my onboard NVIDIA nForce Network Ethernet card. I have a XPS 730 running Windows 8 (64 bit). What is the most recent date of the driver for this adapter? I was attacked by a VERY bad virus (called SMALL) and have just got everything back to normal (I think). It may be possible that the driver for my network card is corrupted. Device Manager says driver is dated 2/23/2012 and the version is 7.3.1.7336. Is this correct? Two weeks ago the machine ran fine, Windows 8 installed without a problem.
View 1 Replies
View Related
Aug 7, 2011
A few weeks ago, I bought a Linksys AE2500 wireless adapter, and it's worked fine up until a few days ago. A few days ago, when I turned on my computer, I could not connect to the internet. I've tried uninstalling and reinstalling the drivers, but I am denied every time; the message I get is "A device attached to the system is not functioning".I've tried connecting to the internet with my other wireless box I used prior to getting the AE2500 and I cannot connect with that, either. The only way I can connect on this computer is with an ethernet cable.
View 12 Replies
View Related
Dec 27, 2012
After update at win 8 I had problems with the functionality of the WUSB300N. I installed manually the old driver and I have now the limited network and I can not use it.
View 2 Replies
View Related
May 6, 2012
how to install the bluetooth and wifi so I can be reused.
View 1 Replies
View Related
Jan 1, 2013
Since 2 months I have the following problem: the first time each day I power on my computer I cannot get internet access. I cannot reach the networkcenter to check if anything is wrong. Sometimes after a long wait (10 minutes) I get the alert: network adapter is not available. The only option is to power down the computer and to power on again. Usually then I have internetacces. I have run all kinds of diagnostics on the dell site but when internet acces is working nothing seems to be wrong. I have a XPS dimension 8300 with a Broadcom Netlink Gigabit Ethernet adapter
View 3 Replies
View Related
Mar 29, 2012
I m getting red & orange lights on lan socket
View 1 Replies
View Related
Jul 24, 2012
[URL]...
1655#comment-12826 I'm experiencing this bug and believe it may be causing a high cpu utilization. Does this bug mean the replay check feature is completely not functioning because I'd like to disable it.
IOS of 2 devices experiencing this issue:
ADVSECURITYK9-M Version 12.4(24)T
ADVSECURITYK9-M Version 12.4(22)YB
View 2 Replies
View Related
Jan 2, 2012
Orange Broadband is logging me off Second Life, It seems the web/internet has hundreds of post users suffering the same problem. Orange fails to have heard changing to DNS settings might work. But do not know how to do that in Windows 7
View 1 Replies
View Related
Aug 29, 2010
I'm running Windows 7 64-bit with the very latest AE1000 driver (3.0.10.0). I have a Netgear WNDR3700 with dual band support. I replaced a D-Link DWA-556 PCIe 2.4 GHz card with this USB unit because I was seeing interference with my keyboard and mouse (Logitech Bluetooth). When the AE1000 works, I can consistently connect at 300 Mbps and the speed is great.Unfortunately, every so often, the connection to the internet drops and Windows 7 must do a wireless adapter reset in order to regain access to my network. During this time no other machines connected on the wireless network report any disruption and neither the 2.4 GHz or 5 GHz WiFi profiles are connectable with the AE1000.I've tried switching from the built-in USB 2.0 ports on my motherboard to the USB 3.0 daughtercard to no avail. I've tried uninstalling and reinstalling the driver. However, I started seeing this issue literally the day I installed this thing. The problem happens sometimes a few instances in an hour but then won't happen again for another few hours.In Event Viewer, I'm pretty consistently seeing:The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)]
View 9 Replies
View Related
