D-Link DIR-655 :: It Won't Stay Logged In To Setup
Aug 7, 2011
I have a DIR-655. Whenever I log into the router to review settings, I get kicked back to the login screen. I can't get to any of the menus. I'm running the A3 hardware version and 1.35 firmware on the router. I recently upgraded my computer from Vista 64-bit to Windows 7 64-bit. The problem occurs with Microsoft and Firefox browsers. I was able to access the router using another machine on my home network running Vista 32-bit
View 16 Replies
ADVERTISEMENT
Sep 30, 2012
I up graded to latest f/w. Now I can only log into the unit for about 1 minute before a get a limited connectivity warning, then it boots me out.
View 7 Replies
View Related
Feb 19, 2012
I have a D-Link 655 router. When I access it through my browser, and say I go to the advanced tab, most of the time when I click on any link in any settings it automatically brings me back to the 'login' screen. Once I log in again, then it takes me back to the status screen. For instance, I just logged on. Then I went to click on the 'tools' tab. I do, and it takes me back to 'login' I do, and then back to status.
Also, I have hardware version B1 and Firmware version 2.00NA I see downloads for firmware 2.01NA and 2.03NA under support resources. But my router says my firmware is up to date at 2.00NA. Should I be updating the firmware as it shows on the website?
View 34 Replies
View Related
Jan 28, 2012
I just bought the Dir-655 with 2.00 firmware. I am having trouble with my NAT on my game system and I have tried everything but I have everything setup on my router where it needs to be. I read somewhere, where a guy was having my same trouble and he upgraded his firmware to 2.03na. I have tried with no success whatsoever.
Downloading the file from the d-link website with no problems. But i keep getting the same message when i try to upgrade the router saying the file may be corrupt, the router is to busy, or I am not logged in as an Admin. I am the only one using the internet and I am logged into my router as the admin. it wont even start uploading the firmware to my router..
View 9 Replies
View Related
Aug 21, 2011
I'm trying to change some network settings, but the router is unresponsive when I try to connect to its ip address. If I reset the router it opens a 20 second window where I can log in, but then goes unresponsive. I have encountered this on my main pc connected wireless, and duplicated the results when wired in with my netbook.
View 1 Replies
View Related
Jun 21, 2011
I installed the DIR-655 on my home network a couple weeks ago to replace an older model D-Link that failed.
I'm having trouble with my laptop maintaining a connection to the network ever since.
Details:
Firmware Version : 2.00NA , Wed, 12, May, 2010
Hardware Version: B1
Desktop WinXP hardwired to router
Blu-Ray player hardwired to router
Dish Network received hardwired to router
Laptop Win7 wifi
Android phone wifi
CenturyLink DSL
It seems that the wifi stays up until I try to access the internet via the laptop. After a few seconds, the laptop will disconnect, and many times the router seems to reset itself, though not always. This does not happen when using a hard-wired connection. Using the wifi-enabled Android phone doesn't seem to affect the network.
Sometimes the wifi comes back up pretty quickly, but other times it does not. Earlier today, the internet globe light on the router turned from blue to amber. I had to reset the CenturyLink DSL modem for it to work again.
When the network goes does, I get a message on my desktop that a network cable is unplugged, and the network disappears from my available wifi networks that I can see with the laptop. Sometimes I get the "limited connectivity" message.
I have tried changing the 802.11 mode around, and I've changed from Auto Channel Scan to Channel 1. Neither of those have fixed the problem.
View 7 Replies
View Related
Mar 29, 2013
I was trying to set this up pointed out a back window, but obviously ran into the IR lights reflecting back on the glass. I don't have an external IR light yet, but just tried the manual IR mode and the IR lights stay on.
View 9 Replies
View Related
Mar 27, 2011
Some1 browse my PC via LogMeIn Hamachi, so i need 2 know who did that , how 2 see the log list?
View 1 Replies
View Related
Aug 30, 2012
how can i find out who logged in and out of my laptop
View 1 Replies
View Related
Aug 28, 2012
I've noticed a strange behaviour in my 2960s regarded to CPU.
CPU level is very high, 70-75% when nobody is logged by vty or console, but it drops drastically to 40% when sombebody logs in. I've been able to discover that this is due to CPU interrupt level, as it shows the output of sh process cpu sort 5sec, just logged in.
RH0A01-SW1-10G#sh proces cpu sorted 5sec
CPU utilization for five seconds: 68%/37%; one minute: 67%; five minutes: 50%
...Some seconds after logged in...
RH0A01-SW1-10G#sh proces cpu sorted 5sec
CPU utilization for five seconds: 35%/11%; one minute: 52%; five minutes: 48%
View 3 Replies
View Related
Sep 13, 2011
is there a way to see who logged on my network at any time during the day/week/month?
View 1 Replies
View Related
Jan 3, 2012
In case I view the crashinfo file with more crashinfo:data, there is a "Log buffer:" section, which has logged all the commands executed by users.
View 4 Replies
View Related
Sep 5, 2011
After some time no using Cisco ACS5.1, I still don't know how I can see all logged in users. I can see logging and check why an log in goes wrong, but in ACS 3.2 I just clicked on Reports and Activity and I could choose to see logged in users, or failed attempts, etc.
View 2 Replies
View Related
Aug 26, 2012
I was having users on a Cisco WLC 440x controllers. Some service accounts were logged several time with the same AD-Account.Since I migrated them on the new controller (5508), it seems that we cannot have the same AD user logged several time.
I changed the Radius server with the one we were using on the old 440x but situation seems to be same,I checked the error message when trying to start a second similar connection they looks like :
*Dot1x_NW_MsgTask_4: Aug 24 14:04:51.558: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3062 Max EAP identity request retries (3) exceeded for client xxxxxxxxxxx
*Dot1x_NW_MsgTask_4: Aug 24 14:04:51.558: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447
Authentication aborted for client xxxxxxxxxxx
If I move back to the other 440x similar logins are allowed without any problems.
View 3 Replies
View Related
Aug 22, 2011
how to find the current logged on user on a domain network? I tried nbtscan but it gives me ip address, machine name and mac address. In the server column it gives <server> and in the user name column it give <unknown>.
View 1 Replies
View Related
May 7, 2013
Is it possible to see device information for equipmnet that is logged into the AP541N access point? I was able to determine a specific IP address was eating a significant amount of bandwidth and was hoping to get the device information (name, type, etc) in the hopes of tracking down who it was.
View 1 Replies
View Related
Apr 9, 2012
What I got is a 5505 ASA firewall and I'm connected to it via VPN. I'm pulling an 192.168.169.x address because that's what we set their company's internet LAN to. Which is what we want. What I can't do while I'm VPN'd in is ping from the internet network to the DMZ, and the same when I try and ping from the DMZ to the internal network.
The DMZ is on a 196.0.0.x network.The internet network is 192.168.169.x network.
I don't need them to have internet access on the DMZ I just want to be able to access it from the internal network. What is going on is we need them to be able to VPN into the DMZ and access their equipment. At this point it would just make me happy to be able to ping from the internal network to the DMZ and I can figure it out from there I've setup rules and applied them and when I wasn't having success I referred back to defaults. Right now the rules are set at default, any thing in and anything out, on both internal and DMZ. I'm using a VPN client and going through Cisco ASDM Launcher to setup the rules and static routes, I haven't done anything with the command line. All the research I've done everyone does it command line, I find it easier to do it GUI. This is my first time working with an ASA firewall.
View 2 Replies
View Related
Jul 17, 2012
I have a Cisco ACS 5.1 virtual appliance which has been working fine, I have however just discovered that it is now unable to provide me with any logs. TACACS authentication is still working without any issues, the only problem I have is viewing the logs.
View 6 Replies
View Related
Sep 9, 2012
After upgrade to ACS 5.2 appliance , we are trying to configure AAA between Ciscoworks and ACS. Authentication is working but authorization fails , logged user cannot access to admin parameters. I've configured attributes manually but it doesn't work.Does ACS 5.2 support integration with CiscoWorks?
View 1 Replies
View Related
Feb 9, 2012
I have a rule which permits traffic to a web server and logging is enabled. But when I go to syslog I am only seeing traffic which has been denied. What needs to change to be able to see the logged traffic on permit rules?
View 1 Replies
View Related
Feb 12, 2011
I have been testing WiFi devices such as the iPhones and iPads connectivity with the following setup:
1. 3502i AP
2. WLC 5508 SW 7.0.98
3. NGS
The i-devices have iOS v4.2
My goal is to have the guest user i-devices maintain the credentials (username and password) when they login again to the wireless network. Like if the device sleep, I think definitely they would loose those IP address issued by the DHCP. Once the guest user uses them again and connect them to the wireless network the user would not need to type-in those credentials on the Web Authentication page directed by the WLC.
The credentials are issued by the sponsor who created them on the NGS. It seems that there are WiFi problems with these i-devices. But somehow, I'm looking for a solution that would automated the logins like a checkbox if you want to be kept signed in, on Yahoo or Stay signed in for GMail.
View 6 Replies
View Related
Feb 12, 2012
I have a Cisco 4402-25 WLC with the below information that is having an interesting issue. When you log into the GUI interface with the local account and click on WIRELESS, then choose a accesspoint it brings up a menu where you have three buttons below for the following options (Hardware Reset - Reset AP Now), (Set to Factory Defaults - Clear All Config), and (Set to Factory Defaults - Clear Config Except Static IP). The problem I am having is we access all of our WLC's using Radius and when you enter your AD username and password and go to bounce a access point the GUI interface is missing the buttons, they however appear fine when logged in with the local account.
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
RTOS Version..................................... 7.0.220.0
Bootloader Version............................... 4.0.206.0
Emergency Image Version.......................... 5.2.157.0
View 2 Replies
View Related
Nov 25, 2012
I have configured PPTP Server on RV042, and created 3 accounts. I am able to connect from Windows PC without any problems.
In the router's logging utility, there doesn't appear to be any log entries indicating either successful or failed attempts to connect to PPTP server. The only access logs I see are for access to the router's configuration utility. Is there a way to view PPTP access in the router system log?
View 4 Replies
View Related
Sep 25, 2011
We are facing issue with one of the module installed on cico 4506 swicth. All of a sudden cisco phones connected to that module went down and the messages logged on the console. [code]
View 9 Replies
View Related
Feb 9, 2012
I bought my son a PS3 for Christmas and we had one laptop at the time and we had them both connected wirelessly to the internet and they both worked fine. We recently purchased another laptop and when we connected it to the network, now the PS3 will not stay connected to the internet. It is says that the connection is good when you test it, but when you try to download the updates, it stops and says there is an error.
View 3 Replies
View Related
May 11, 2011
My computer constantly fluctuates between being connected to the wireless network/internet and "connected with limited access" in which I cannot access the internet. I am then forced to disconnect and reconnect. I then have 1-20 minutes before it drops back to limited connectivity.[CODE]
View 3 Replies
View Related
Oct 10, 2012
I've recently had an issue where when I turn on File and Printer Sharing, and click apply, I go straight back to the advanced setting menu and its switched back to off despite me changing it.
I cheked my services menu and I'm not sure what file and printer sharing has a dependancy on, but Workstation, Netlogon, and Computer Browser will not turn on with the error "windows could not start *** service on the local computer. Error 1068: The dependency service or group failed to start"
I network printers and servers for a living, so this is an issue when I'm troubleshooting problems.
I cant really name everything thats been installed on this laptop, it changes pretty consistently, but no programs should have interfered with my network.
View 8 Replies
View Related
Feb 29, 2012
I have many computers and work on a wireless network. We live in a very large multi-unit building in a very large city. We hadn't had any issues with connectivity for a while, but recently the PCs in the office cannot stay connected for more than a minute or two. It happens to our two desktops and one laptop; the only computer that seems immune is the lone apple laptop. The PC laptop has much less difficulty staying on when I sit in the room with the router. The office is literally the next room over, less than 20 feet. The network still shows up as an available network, it just won't connect. All the impacted computers will be fine for maybe a minute and then will all drop out at the same time. Rarely (like once in the past month) there will be no issues at all, and we can stay on all day. We have changed the channel of it a few times, but there are at least 15 other networks nearby. The router is relatively new, it is a Netgear Rangemax Duo wireless n-adapter. We have gotten to the point where we have no idea where to go next.
View 4 Replies
View Related
Mar 10, 2013
My hard drive recently burned out , so i bought a new one and download windows 7 , but none of networking drivers were installed so i went to the website and installed them but they wont stay connect to my router , it disconnects immediately and im using my phone tethering to connect.
basic information
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
[Code]....
View 1 Replies
View Related
Jan 3, 2012
I have a 2 yo computer, custom ASRock G31M-S R2.0 with XP. I have QWest PK5000 wireless modem. I do not have a wireless computer, have a desktop. I am connected to the Internet by Century Link. The ethernet light doesn't stay on, and therefore I lose my connection to the internet. Sometimes for days at a time. Everything is plugged in. I looked at the wires outside my house to the area where my computer is located. Looks good. Century link says it is my computer.
View 2 Replies
View Related
Feb 9, 2012
I've seen a couple of expired threads on this subject, so I'm sorry for resurrecting it! I have just got a ZyXEL P660HN-TxA router/modem on my home landline to use for wifi with my smartphone. The problem I have is it won't stay connected for long. It connects quickly & browsing is fast for a few minutes, but then it just kicks me offI am still connected to the wifi, but I can't browse anything or re-connect to the internet. Sometimes I can use it for up to 10/15 minutes before it kicks me off. I have to reset the modem, or turn the wifi off then back on via my phone.
View 4 Replies
View Related
Feb 9, 2011
My computer keeps connecting and disconnecting from the internet- other computers on the network aren't doing this- i also manually put in an IP address and that didn't work either, whats going on?
View 5 Replies
View Related
Oct 24, 2011
My laptop was recently reset to factory settings and had the hard drive wiped, since I got it back, I can't remain connected to the internet. We have a second laptop running off the wireless that hasn't had any issue. I try to disconnect from the network and reconnect and sometimes after 2-5 attempts, I'll browse the internet for 5-45 min and then it will say it can't identify the network or that the computer is only connected locally.
View 6 Replies
View Related
