D-Link DIR-655 :: Won't Stay Logged In While Switching Menus On Browser Screen
Feb 19, 2012
I have a D-Link 655 router. When I access it through my browser, and say I go to the advanced tab, most of the time when I click on any link in any settings it automatically brings me back to the 'login' screen. Once I log in again, then it takes me back to the status screen. For instance, I just logged on. Then I went to click on the 'tools' tab. I do, and it takes me back to 'login' I do, and then back to status.
Also, I have hardware version B1 and Firmware version 2.00NA I see downloads for firmware 2.01NA and 2.03NA under support resources. But my router says my firmware is up to date at 2.00NA. Should I be updating the firmware as it shows on the website?
I have a DIR-655. Whenever I log into the router to review settings, I get kicked back to the login screen. I can't get to any of the menus. I'm running the A3 hardware version and 1.35 firmware on the router. I recently upgraded my computer from Vista 64-bit to Windows 7 64-bit. The problem occurs with Microsoft and Firefox browsers. I was able to access the router using another machine on my home network running Vista 32-bit
I have a wrt54G v8 wireless router and I was trying to install a firmware update a while ago and got impatient, stopped the upgrade in the middle of it and I think I may have bricked my router. I've since tried the 30/30/30 reset a number of times and have noticed that I don't get a blinking power light which I guess means it's ok.
Now when I go to 192.168.1.1 and log in, I can see most menus but when I click the firmware update menu (there's another screen that's also all white, I forget which one), it's all white (or blank). I've searched for a solution on the web and no luck so far.
I've been trying to do this on a mac and no luck. I then booted into windows 7 and used IE 9 to log into 192.168.1.1 and still the same thing, the firmware update screen is blank.
I just bought the Dir-655 with 2.00 firmware. I am having trouble with my NAT on my game system and I have tried everything but I have everything setup on my router where it needs to be. I read somewhere, where a guy was having my same trouble and he upgraded his firmware to 2.03na. I have tried with no success whatsoever.
Downloading the file from the d-link website with no problems. But i keep getting the same message when i try to upgrade the router saying the file may be corrupt, the router is to busy, or I am not logged in as an Admin. I am the only one using the internet and I am logged into my router as the admin. it wont even start uploading the firmware to my router..
I'm trying to change some network settings, but the router is unresponsive when I try to connect to its ip address. If I reset the router it opens a 20 second window where I can log in, but then goes unresponsive. I have encountered this on my main pc connected wireless, and duplicated the results when wired in with my netbook.
I installed the DIR-655 on my home network a couple weeks ago to replace an older model D-Link that failed.
I'm having trouble with my laptop maintaining a connection to the network ever since.
Details: Firmware Version : 2.00NA , Wed, 12, May, 2010 Hardware Version: B1 Desktop WinXP hardwired to router Blu-Ray player hardwired to router Dish Network received hardwired to router Laptop Win7 wifi Android phone wifi CenturyLink DSL
It seems that the wifi stays up until I try to access the internet via the laptop. After a few seconds, the laptop will disconnect, and many times the router seems to reset itself, though not always. This does not happen when using a hard-wired connection. Using the wifi-enabled Android phone doesn't seem to affect the network.
Sometimes the wifi comes back up pretty quickly, but other times it does not. Earlier today, the internet globe light on the router turned from blue to amber. I had to reset the CenturyLink DSL modem for it to work again.
When the network goes does, I get a message on my desktop that a network cable is unplugged, and the network disappears from my available wifi networks that I can see with the laptop. Sometimes I get the "limited connectivity" message.
I have tried changing the 802.11 mode around, and I've changed from Auto Channel Scan to Channel 1. Neither of those have fixed the problem.
We are facing issue with one of the module installed on cico 4506 swicth. All of a sudden cisco phones connected to that module went down and the messages logged on the console. [code]
I was trying to set this up pointed out a back window, but obviously ran into the IR lights reflecting back on the glass. I don't have an external IR light yet, but just tried the manual IR mode and the IR lights stay on.
I've reset my router, reinstalled Cisco Connect and didn't configure anything on parental controls.However, when I navigate to the "Access Policy" menu all I see is parental controls. I don't see any of the more sophisticated filtering menus like "access blocking policy", etc. I've attached a screenshot.
I am having trouble accessing my DIR-655 remote management screen via ip to my network.To make sure i didnt have any odd settings, i did a hard reset on my router first.I then enabled remote management, and left the default port 8080 I try to access viw the ip address on my status page suffixed by the port 8080 [URL] page cannot be found.I then enabled https and tried to access via:[URL]page cannot be found.I then setup a entry in the virtual server to redirect http requests to my workstation hosting IIS7, if i connect to localhost, the iis welcome screen appears, but if i browse to my ip, i get nothing.I am using Cox residential service, i called them and they informed me that they do not filter or block requests in any way.
I have a Netgear WNDR3300 Dual-Band and is setup to use both 2.4Ghz and 5Ghz to achieve 300 Mbps connection.
On the DAP-1522, I use IE (not Firefox or Chrome) for configuration as follow: - IP address: STATIC - Wireless config: using Wizard - Wireless security: WPA2 / AES - Mac Cloning: disabled
I tested this by connecting a Windows 7 desktop AND laptop via Ethernet cable and both laptop can obtain IP address dynamically, so my DAP-1522 is talking to the WNDR3300 (it has DHCP). Both Win 7 machines can also access the Internet.The problem is, I can NO LONGER access DAP-1522 admin screen, even by typing the static IP address assigned to it. The ONLY way I can re-access it is:
a). Reset DAP-1522
b). Shutdown the WNDR3300 wireless router, assign a static IP to the laptop, connect via cable to DAP-1522
I have just installed two DCS-942L cameras and uses MyDlink. The live video is OK from MyDlink, but when I log on to the cameras from "Advanced Settings" the live video is just a black screen, no matter what video profile I select. Like wise I can't select motion detect area, because there is just a black screen.I have tried on tree different computers. What can be wrong?
When I try to find where to select between the different encryption types (TKIP or AES), I see the info on page 87 of the product manual, but this doesn't match what I see in the Manual Wireless Network Setup screen. You can select WPA Personal (in Security Mode), but there are no further panels below it to select encryption types and enter the PSK. Compare page 30 to page 87. There are extra panels on 87 that don't appear on 30, and I can't find a way to access them while accessing the router.I've got the unit set up and running; works fine with my wireless laptop. It's just that I need to be able to switch between things in order to troubleshoot a setup with an internet radio I'm trying to get running (Grace Digital, which apparently doesn't do 802.11n, only up to g).
Ive formatted the sd card, enabled video/image recording, but no files show up on the sd management screen. I tried to select a folder to save the files to from the live video screen, but nothing pops up/opens when I click on the folder button. I'm using the google chrome browser w the latest java update on an xp box.
I have a DCS 3420 that is connected via CAT5 to may LAN and 2days ago something happened on the laptop, whenever I open the window in internet explorer on Win XP Pro; the camera just show a black screen.If I use any other computer on my LAN I get a clear picture of the Gate that the camera is focused on...I have checked the laptop drivers and updates but ca not see something wrong.
As DCS-942L IP cam is compatible with "NVSCGI APIs" (search this string on a search engine and you will find some useful PDF docs), many features of this IP Cam may be enabled or disabled using any web browsers, for example we can manage the motion detect.
I have a Cisco catalyst switch 3750G has all LED lights staying amber still without blinking, I cannot console into it and it can’t boot past the POST.
THE ISSUE HAPPENED ON THE NETWORK AND IT WAS ISOLATED FROM THE NETWORK, SO NOW I AM TRYING TO RESOLVE IT OUTSIDE THE NETWORK
Id like to keep private the fact that im using a Dlink router, for exemple, if someone tries to connect to my network they will be directed to a page with something like,d-link error page Oops! The page you requested is not available
Where can I delete this function, so that there is no page at all shown ?
I'm not sure if it's different when you log in remotely via mydlink, but by using the web based interface localy (by ip address) I can't find a way of exiting full screen option under live view. I tried the obvious escape button. Right-clicking does nothing, and double clicking actually makes it truly fullscreen (aspect ratio gets stretched to my monitor 16:9 btw, instead of retaining 4:3.So is there a way to exit? Using chrome, maybe it's a chrome issue and it works differently in other browsers but I see no mention in the manual of exiting fullscreen.
I run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.
Is there any way to access the USB storage I plugged into my router other than using an Internet browser? I was hoping to use it like any other drive on my system.
I have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?
I have a catalyst 3550 and will be using it to run my cisco 7940 and 7960 ip phones with POE. When I plug the phones into the switch they power up just fine but the phones will not dial out as they have little x's by the line. I have also tried going through the set up of the 3550 but get stuck in one place. When I go to the 10.0.0.0, the screen will not allow me to enter the telnet page or allow me to enter any information. In the manual it shows a pic of what the screen should look like when I go to 10.0.0.1, but I am getting an entirely different page.
What I need to do to get everything set up correctly?
Region : UnitedKingdom Model : TL-WR740N Hardware Version : V4.20.0 Firmware Version : ISP :
I am trying to work out how I can use the WR702 to connect to a Hotel's wireless connection. As with most modern hotel setups, the hotel requires the user to access a web browser and enter the room number and select a purchase plan.I believe there must be a way that I can connect the WR702 to the hotel's network and then use a browser on a linked (wireless or ethernet) laptop to launch the browser and log in, however, I have tried every default configuration on the WR702 and cannot find a solution.
Setup:
WR702 router HP EliteBook 8440p laptop (ethernet and wifi available) Hotel wifi (multiple identical SSIDs in the survey but shows as a single wifi name on my iPhone)
I upgraded a Catalyst 2950 switch and there wasn't enough room so I deleted the flash. The upgraded went well using tftp. It booted up fine. The I0S version includes crypto. But, I can't access switch via web browser or CNA. Port scan shows port 80 0pen. What am I missing?
Here is the flash. Directory of flash:/ 2 -rwx 112 Mar 01 1993 01:00:48 +00:00 info 3 -rwx 3722814 Mar 01 1993 01:02:58 +00:00 c2950-i6k2l2q4-mz.121-22.EA14.bin 4 drwx 4416 Mar 01 1993 01:03:45 +00:00 html 331 -rwx 112 Mar 01 1993 01:04:19 +00:00 info.ver 332 -rwx [code]....
