D-Link DIR-601 :: Page 87 Of Manual Doesn't Match Setup Screen
Jan 25, 2011
When I try to find where to select between the different encryption types (TKIP or AES), I see the info on page 87 of the product manual, but this doesn't match what I see in the Manual Wireless Network Setup screen. You can select WPA Personal (in Security Mode), but there are no further panels below it to select encryption types and enter the PSK. Compare page 30 to page 87. There are extra panels on 87 that don't appear on 30, and I can't find a way to access them while accessing the router.I've got the unit set up and running; works fine with my wireless laptop. It's just that I need to be able to switch between things in order to troubleshoot a setup with an internet radio I'm trying to get running (Grace Digital, which apparently doesn't do 802.11n, only up to g).
View 2 Replies
ADVERTISEMENT
May 20, 2013
N600 DB on OSX. I keep on reading the material that there is a link on the dashboard that I click on to set up the router manually. Nowhere on the dash board is that link. Where is that link?
View 1 Replies
View Related
Apr 23, 2012
I am using a DIR 655 router with a DSL 526B modem/router combo. I always get a message saying "Oops! The page you requested is not available.". The page doesnt load (It sometimes does if I keep refreshing again and again). I read somewhere that it might be because I have to bridge my modem/router with my router
View 1 Replies
View Related
Nov 29, 2011
i have a dir 825 with fw 2.00eu that i wanted to upgrade to the new beta fw.i went to tools and did a factory reset first,when i wanted to log back in to load the new fw,it sudenly asks for a authentication code,problem is the field is marked with a red x so i cant see any code i'm using windows 7 and IE 9?
View 5 Replies
View Related
Jul 7, 2012
my acer laptop is only showing half the graphics when on my email pages a small band of the emails and the top half blank son i have to continually scroll up to read the e mails the screen is fine on every other page?
View 1 Replies
View Related
Dec 14, 2011
I'm setting up A DAP-1522 in bridge mode. Network setup went fine. When I went to wireless setup I got a blank page, all white no letters, nothing. I've logged out and back in again with the same results.
View 8 Replies
View Related
Mar 3, 2011
The problem i am experiencing is that on my home network i have been using for several years now one computer on my network suddenly cannot get online..however it can connect. They determined that all is working well and all settings are as they should be. I then contacted my ISP, Cox communications and was essentially told the same thing. This is after going through several tests with each, such as ping tests, turning the gateway off/on, reviewing settings such as TCP/IP, DNS, etc, etc. The findings were that i have IP addresses and everything else that should be there. Ive turned off the firewall, disabled antivirus, reset tcp/ip stack and winsock. I have been working on this for two days and after paying for it still do not have it fixed. The computer acts as it normally does, no other problems except that when i press the IE icon to open a browser window it tries to go to my homepage, google, but then reverts to the "page cannot be displayed screen". This computer is running XP SP2 and is a wired connection(although it was wireless when i first experienced the problem because i have a network adapter installed as well..but i disabled it and enabled my LAC and used the ethernet cable because this is one of the exercises cisco ahd me perform to see if i could connect wired/wirelessly.. better bandwidth anyway at 100mbps compared to the 56mbps with the wireless-g adapter). The othe computer is a laptop running windows 7.
View 16 Replies
View Related
Jun 6, 2012
I go into my login page and all I see is blank. Just a white screeb. I have put in my IP address, I have no idea what I should do. I have been trying to fnd my password but the page has no login.
View 3 Replies
View Related
Feb 2, 2012
My toshiba tecra m2-s730, running windows xp, won't connect wirelessly to the internet. It finds my wireless network, but when i type in the network security key, it says it doesn't match the one on my router. All my other computers connect fine, and this one will connect when using an ethernet cable.
View 6 Replies
View Related
Mar 24, 2011
My linksysBEFW11S4 router shows a NetWork Key of let's say "mister", when I try to connect a new laptop using this key it comes up with Invalid Key.
View 2 Replies
View Related
Oct 7, 2011
set the max download speed of torrent protocole by my router setup page ?My step father currently downloading with torrent and all the internet in the house is pretty slow so i will love to lower he speed so i can use my internet properly
View 5 Replies
View Related
Oct 24, 2012
I am doing some per-deployment testing with a ASA5585X and noticed that when I feed it a stream of SYN packets on the outside interface the measured traffic rate on the inside interface going out is about 10x the rate of the outside interface going in.
laptop --- ASA --- PC
I send 6k TCP SYN pkt at interface rate from the laptop targeted at PC. No packets are dropped by Ac Ls or policies and can be sniffed at the PC.
Show interface commands show:
sh int inside:
... ...
Traffic Statistics for "inside":
...
1 minute input rate 23 pkt/sec, 1303 bytes/sec
1 minute output rate 4454 pkt/sec, 820757 bytes/sec
sh int outside:
... ...
Traffic Statistics for "outside":
...
1 minute input rate 885 pkt/sec, 70847 bytes/sec
1 minute output rate 7 pkt/sec, 425 bytes/sec
I would expect that if 885 pkt/sec enter the firewall on the outside interface the same amount or less would exit it on the inside...? Why this is not the case? The packet rate is about 5x and the data rate is about 10x greater.
View 6 Replies
View Related
Jul 28, 2011
i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen
View 2 Replies
View Related
Dec 26, 2011
Install my wireless adapter.i can't do the setup wizard as my cd player doesn't read it.
View 1 Replies
View Related
Sep 9, 2012
my sister gave me an old ethernet switch so I could use the internet on my computer and my PS3. Unfortunately I didn't get any type of setup manual so I downloaded one off the manufacturer's website
View 1 Replies
View Related
Dec 14, 2011
I have a small home network, which until now has been set up via a Verizon DSL modem/router. Today I added an ASUS wirless router to the network, and that is working just fine. However, I did not think to shut off wireless service from the modem before I switched over. However, now I can't seem to find the IP necessary to access the modem's setup screens. Whereas before I logged in at 192.168.1.1, I get nothing there now. The new router is at 192.168.2.1 and I have not be able to puzzle out any IP that gets me access to the modem settings. Is there way to find that screen, without totally redoing the setup process?
View 2 Replies
View Related
Dec 8, 2012
Cannot connect to Linksys Router 192.168.1.1 Webpage, do not get login setup screen.
View 1 Replies
View Related
Mar 23, 2013
I've just discovered that my wireless router is not secure (WRT54GS v5). In trying to set up the propoer security, the set up screen appears as incomplete (after entering 192.168.1.1). It only shows 3 tabs at the top - Basic Setup, MAC Address Clone, and Advanced Routing. No tab to deal with the settings. I have tried resetting the router and plug/unplug several times. Triued entering thru IE and Firefox.Is there another way to set up the security on my router or at least get the proper screen?
View 4 Replies
View Related
Apr 27, 2007
When I go to the router setup screen via 192.168.1.1 the screen does not load properly in MSIE or Firefox. Text does not load.The graphics load okay, and the dropdown boxes, checkboxes, etc. Since many of the links are from text, and all of the descriptions, it is impossible to navigate properly. I managed only by using Firefox's Page Info, Links tab and cutting & pasting. A couple of screen captures are available [URL] have downloaded the latest firmware, but while I can get to the Administration page, much less click on, the Upgrade Firmware sub-tab.
View 3 Replies
View Related
Mar 14, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
Region : Others
I have MR3220 version 2 and HUAWEI E398 stick.It connects to 3G/4G network, but with wrong APN.It seems to me that manualy changed APN can not be applied. [code]
View 4 Replies
View Related
Mar 29, 2013
I was trying to set this up pointed out a back window, but obviously ran into the IR lights reflecting back on the glass. I don't have an external IR light yet, but just tried the manual IR mode and the IR lights stay on.
View 9 Replies
View Related
Dec 24, 2011
even though I have successfully added the network manually, using the same settings as my other laptop which has no trouble connecting. So now, the network appears in my "Connect to a wireless network" box, but whenever I try to connect, it says "Windows cannot connect to *name of network*" So when I troubleshoot the problems, it states "Check your wireless settings. Make sure your computer is in range of *Network* and that the network settings match the wireless router or access point settings." I KNOW it's in range because my other computer is connected properly right next to this one. So it must be a problem with my network settings. Though I don't see how that can be because my settings on both computers are exactly the same, but one's connected and one's not. Could the problem simply be that I haven't logged on to my router online to add this computer to the network?
View 3 Replies
View Related
Oct 23, 2012
My lenovo notebook shows internet connection is there but web page doesnt load
View 4 Replies
View Related
Sep 12, 2011
set up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 3 Replies
View Related
Sep 12, 2011
Set up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 1 Replies
View Related
Aug 21, 2012
I am using a Mac and would like to view the live feed full screen. Is this possible?
View 3 Replies
View Related
Apr 26, 2010
I am having trouble accessing my DIR-655 remote management screen via ip to my network.To make sure i didnt have any odd settings, i did a hard reset on my router first.I then enabled remote management, and left the default port 8080 I try to access viw the ip address on my status page suffixed by the port 8080 [URL] page cannot be found.I then enabled https and tried to access via:[URL]page cannot be found.I then setup a entry in the virtual server to redirect http requests to my workstation hosting IIS7, if i connect to localhost, the iis welcome screen appears, but if i browse to my ip, i get nothing.I am using Cox residential service, i called them and they informed me that they do not filter or block requests in any way.
View 12 Replies
View Related
Nov 30, 2011
I have a Netgear WNDR3300 Dual-Band and is setup to use both 2.4Ghz and 5Ghz to achieve 300 Mbps connection.
On the DAP-1522, I use IE (not Firefox or Chrome) for configuration as follow:
- IP address: STATIC
- Wireless config: using Wizard
- Wireless security: WPA2 / AES
- Mac Cloning: disabled
I tested this by connecting a Windows 7 desktop AND laptop via Ethernet cable and both laptop can obtain IP address dynamically, so my DAP-1522 is talking to the WNDR3300 (it has DHCP). Both Win 7 machines can also access the Internet.The problem is, I can NO LONGER access DAP-1522 admin screen, even by typing the static IP address assigned to it. The ONLY way I can re-access it is:
a). Reset DAP-1522
b). Shutdown the WNDR3300 wireless router, assign a static IP to the laptop, connect via cable to DAP-1522
View 3 Replies
View Related
Mar 22, 2011
i need to do the following:
-go to routers startup page
-log in
-look for my WAN MAC address
it seems so easy, but i keep getting instruction to do things like type in different numbers into my browser which never work.
View 14 Replies
View Related
Jun 9, 2012
I want to do a logging in page for wifi network ,I use IIS to host my page , ASP.net as the page designer and I think but I'm not sure yet that I make my PC work as a gateway by enabling IP ROUTER form the registry ,now what I need is how to make that page available in all wifi users web browsers except the users they logged in ?
View 1 Replies
View Related
Aug 29, 2012
when i was on my linksys setup page 192.168.1.1 i accedently disabled wireless web access now i cant undo it so now i cant use wifi
View 1 Replies
View Related
Feb 22, 2012
I have just installed two DCS-942L cameras and uses MyDlink. The live video is OK from MyDlink, but when I log on to the cameras from "Advanced Settings" the live video is just a black screen, no matter what video profile I select. Like wise I can't select motion detect area, because there is just a black screen.I have tried on tree different computers. What can be wrong?
View 7 Replies
View Related
Feb 10, 2013
Ive formatted the sd card, enabled video/image recording, but no files show up on the sd management screen. I tried to select a folder to save the files to from the live video screen, but nothing pops up/opens when I click on the folder button. I'm using the google chrome browser w the latest java update on an xp box.
View 4 Replies
View Related
