Finding DSL Modem Setup Screen?
Dec 14, 2011
I have a small home network, which until now has been set up via a Verizon DSL modem/router. Today I added an ASUS wirless router to the network, and that is working just fine. However, I did not think to shut off wireless service from the modem before I switched over. However, now I can't seem to find the IP necessary to access the modem's setup screens. Whereas before I logged in at 192.168.1.1, I get nothing there now. The new router is at 192.168.2.1 and I have not be able to puzzle out any IP that gets me access to the modem settings. Is there way to find that screen, without totally redoing the setup process?
View 2 Replies
ADVERTISEMENT
Nov 4, 2011
finding my wpa key to setup my ps3 wirelessly.
View 1 Replies
View Related
Dec 8, 2012
Cannot connect to Linksys Router 192.168.1.1 Webpage, do not get login setup screen.
View 1 Replies
View Related
Mar 23, 2013
I've just discovered that my wireless router is not secure (WRT54GS v5). In trying to set up the propoer security, the set up screen appears as incomplete (after entering 192.168.1.1). It only shows 3 tabs at the top - Basic Setup, MAC Address Clone, and Advanced Routing. No tab to deal with the settings. I have tried resetting the router and plug/unplug several times. Triued entering thru IE and Firefox.Is there another way to set up the security on my router or at least get the proper screen?
View 4 Replies
View Related
Jan 25, 2011
When I try to find where to select between the different encryption types (TKIP or AES), I see the info on page 87 of the product manual, but this doesn't match what I see in the Manual Wireless Network Setup screen. You can select WPA Personal (in Security Mode), but there are no further panels below it to select encryption types and enter the PSK. Compare page 30 to page 87. There are extra panels on 87 that don't appear on 30, and I can't find a way to access them while accessing the router.I've got the unit set up and running; works fine with my wireless laptop. It's just that I need to be able to switch between things in order to troubleshoot a setup with an internet radio I'm trying to get running (Grace Digital, which apparently doesn't do 802.11n, only up to g).
View 2 Replies
View Related
Apr 27, 2007
When I go to the router setup screen via 192.168.1.1 the screen does not load properly in MSIE or Firefox. Text does not load.The graphics load okay, and the dropdown boxes, checkboxes, etc. Since many of the links are from text, and all of the descriptions, it is impossible to navigate properly. I managed only by using Firefox's Page Info, Links tab and cutting & pasting. A couple of screen captures are available [URL] have downloaded the latest firmware, but while I can get to the Administration page, much less click on, the Upgrade Firmware sub-tab.
View 3 Replies
View Related
Jan 11, 2013
I am looking for a router or something else that still allows me to connect my phone line to my router or computer so people in the house can make calls. My cable modem is a Motorola SBV5120 I had it for eight years now and I am thinking of switching our network to wireless so I don't get those cluttered wires.
View 1 Replies
View Related
Jul 2, 2011
I've got a WAP610N access point and 4 WET610N to connect to it - however, no matter what I do when trying to install the WAP610N the setup tells me it cannot find the device.I've got the WAP610N connected to a homegateway (SAGEM) and my computer connected wired to the HGW. The HGW is setup as a DHCP server, everything beside the WAP610N works. It gets an IP address, and I can login to the web interface of the access point - but is still unable to use the setup and unable to connect any of the WET610N.
View 2 Replies
View Related
Dec 15, 2011
I am trying to setup a small audience internet radio.An I have been looking around for decent software to do this.I like to use it in conjunction with Winamp 5.0 And also I like it to stream to a radio server preferably Caster.FM An I would like to slipstream an microphone channel into that.I did try EdCast, but no microphone option.Apart from that its the best I came across.
View 2 Replies
View Related
Aug 24, 2012
I'm following this tip, but how do you access the second router (Cisco E2500) settings? I always get sent to the first router.
View 4 Replies
View Related
Jun 10, 2011
I'm purchasing an Actiontec GT724WGR Universally Compatible 4-port ADSL Wireless Gateway to be used strictly as a modem with Qwest DSL. I'm also purchasing an Asus Black Diamond Dual Band Processor, Hardware NAT, 5 Internal Antennas, Fast Gigabit Ethernet and 128MB DDR2 Wireless Router (RT-N56U) to be utilized a my primary router.My question is how do I set up the Actiontec modem to be strictly used as a modem without the wireless g function transmitting since I will be using the ASUS as the primary router? Or do I just let both of the transmit as routers together?
View 3 Replies
View Related
Aug 23, 2012
Is there a way to force the user to use the modem dns settings? I'm using open dns (set within the modem settings) but think the users are simply entering alternate dns servers in the browser settings or temporarily re-configuring the network settings. I know the easy solution is to take away administrative privileges, but due to the work the users are doing, they need admin privileges.
View 7 Replies
View Related
Jan 19, 2011
I brought a router TP-LINK TL-WR741ND . I have an usb modem which has no other port as lan . I have only one ethernet lan controller which is integrated .Now With the mentioned device above can i setup my router , so i can use the internet on other wifi device.
View 2 Replies
View Related
Sep 22, 2011
I want to setup SQL Server on my internal home network, and make it available to my colleagues.
[code]...
Win 2008 Server with SQL Server.What do I need to do to allow my colleagues to connect to the SQL server from their computers, in their offices (not on my network)?For example, because I have a DHCP address from my ISP, do I need to use something like DynDNS to track my IP address?
View 1 Replies
View Related
Dec 26, 2012
I've got a a tp-link TL-WR741ND, but I don't have a ADSL2+MODEM ROUTER, (ADLS MODEM). Instead I've got a orange usb modem, how can I install the device?
View 2 Replies
View Related
Jul 14, 2011
We have three laptops in our house. We are set up with internet that gives me a direct connect and up to eight wireless devices. My son and daughter-in-law use the wireless and I use the direct connect. M son added a router (which I have no idea what that does) and set up networking on his computer (which I also have no idea what that does). When I am the only one on the computer, it flys. When either of them get on thiers too, it slowes a little. When both of them get on, I might as well get off because it can take up to three and a half minutes to load a page.
View 3 Replies
View Related
May 15, 2012
I bought the DIR 655 to put into our network as the Netopia wireless fails to connect even though we have maximum signal strength. Att advised that buying a third party router would solve this problem.I did manage to almost configure the DIR 655. I would have to connect it to the system to test it[CODE]
View 5 Replies
View Related
Feb 16, 2012
My adolescent son wants to create a server to host video games. We, the parents, want to separate our computers and files from all the crazy security risks my son and his friends take, while allowing them to learn by their mistakes.I want 2 separate networks, or does this make sense? Would love to have our computers (assorted PC's, Macs, both laptops and desktops, running Vista Ultimate, Windows 7, OSX 10.5 and up), ipods, TV's, Blu-rays, wireless printers, etc. isolated from our son's computers, ipods, TV's, XBox, Blurays, wireless printers, (as well as the digital stuff his friends bring over).Since security is the reason for this, would love any tips over and above Brian Posey's article on Tech Republic (5 common security mistakes people make on setting up wireless networks, or something like that)We have Optimum high speed (testing up to 65 mps) internet service and 5 static IP addresses to work with.
View 4 Replies
View Related
Jun 13, 2011
I've been having problems with the router portion of my cable modem router. I have a brand new router that I would like to use rather than the crappy router that is part of the cable modem.The problem is that I'm not able to get online no matter how I set the settings. I have disabled DHCP in the cable modem router and am connecting this to the router thru the internet port of the router.
View 12 Replies
View Related
Mar 1, 2011
How to establish two different routers with seperate networks to a single cable modem?
View 3 Replies
View Related
Apr 16, 2011
I would like to be able to access my DSL Modem's http setup screens from my networked computers via my DIR-655 (rev B) router - but I do not know how to get the router to route to the WAN port.
At first, I had my DSL Modem's LAN IP at 192.168.0.1 and my DIR-655 at 192.168.1.1 and the rest of my home network at 192.168.1.xxx; because I had read on a forum that having the modem on a different subnet prevented potential routing problems. When I pointed my web browser to 192.168.0.1 - it would just timeout (I kind of expected that).
Now (willing to try anything), I have my DSL Modem's LAN IP at 192.168.0.2 and my DIR-655 at 192.168.0.1 and the rest of my home network at 192.168.0.xxx (DHCP range is set to assign hosts from 64 to 254). When I point my web browser to 192.168.0.2 - it still just times out.
The DSL Modem is setup in transparent bridge mode. And everything else is working well with the home network.
How can I get the DIR-655 to pass/route my http connection to the DSL modem?
View 10 Replies
View Related
May 3, 2011
I have been working on this problem for the last few day and have know idea why its not working but my d link Dir-615 will not work with my qwest q100 modem.
View 1 Replies
View Related
Nov 27, 2011
I can't seem to setup my WAG120N modem.I kept on getting the error "your ethernet cable does not appear to be connected properly" even though I have connected all the cables correctly. I can access the modem through the browser via 192.168.1.1 though.I thought the setup is supposed to be simple but I have wasted few hours.
View 1 Replies
View Related
Apr 25, 2012
How do I setup a E3200 router using a wireless USB modem to connect to the internet? This is my only choice, I do not have a wired connection and I do not own the telephone wires and there is no permission to do otherwise.
View 3 Replies
View Related
Jul 31, 2012
My daughter is on an Army Base in the South Pacific. They have Dial up internet on their home telephone not DSL. They have high speed wireless at the base community center/coffee shop. I will be going there in 9 days to install the dir-615. She has a Dell Desktop with Vista Basic SP1, laptop with XP, IPAD2 and a NOOK Tablet. The dir-615 HVE1 with firmware 5.00na on the bottom sticker. She said she was able to go to web address, login, change the user name and password, started on the wireless configuration and she paniced. My question is basically this. by using a cat5 cable from the desktop to the dir-615 with dialup internet connected can the router be setup using the automatic method as opposed to manual. Our first priority is to be able transfer files to the 2 tablets without being connected to the internet like a switch and secondly If possible go on to the internet from a Tablet or the Laptop. I assume the second option would reuire internet sharing option when setting up the network and performance would be ugly.
Can get I get this router to work this way with just dialup to set it up
View 5 Replies
View Related
Jun 1, 2012
my new netcore nw705p wireless router dns is not respondin
View 1 Replies
View Related
Jan 12, 2013
I've decided to set up a home network - my first attempt at setting up a network, but have run into a problem;I've bought a Linksys HRT54GL routers and connected it to a Cisco EPC2325 modem. I run the setup wizard and everything is going well until the router tries connecting to the internet when a pop-up appears telling me that it can't connect to the internet and that i should try turning my modem off and on again.
View 1 Replies
View Related
May 16, 2011
I am trying to setup a Dynalink Wireless 4 port modem and Network Connection is showing Local Area Connection Network Cable Unplugged,Firewalled, Broadcom Netlink (TM) Ethernet even though the LED light on the cable is flashing, indicating the cable is probably working. I am operating Windows XP Version 2002.
View 8 Replies
View Related
Feb 16, 2013
I am having netgear JNR 1010 wifi router and I use Cablenet. the wire which carries internet is directly connected to my Desktop pc's LAN port without modem.Is there any way to install this router without conecting to modem?
View 3 Replies
View Related
Feb 11, 2011
I'm trying to setup a Canyon CN-FW514 wireless router through a Thomson modem.When I first started trying, I could get up the set-up screen on [URL] however this is as far as I got; the laptop said it had a very strong signal with the wireless connection, but I could not get any web pages to open (windows explorer couldn't detect any problems either). The Thomson modem works when I conect it to the laptop via the ethernet cable, but that's not much use to me trying to use the internet elsewhere in the house!I tried changing the IP address, subnet mask and gateway IP address on the set-up screen [URL] which seems to have been a big mistake; I now can't even get the set-up screen to appear.I've reset the internet options and have set everything to obtain the IP address automatically but am still having no luck.
View 5 Replies
View Related
Feb 2, 2013
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies
View Related
Jan 25, 2012
Im trying to setup a cable modem which is also a router that has a printer attached to one of its lan ports. From there it connects to another router which connects to other clients from there i have another router with a VPN connection with other clients. I would like to be able to see everyone on the network. How do I setup the routers in particular the router with the vpn which is the last router. Also the vpn router is connected through its WAN port to the router ahead of it at its lan port so it can use its VPN connection.If it makes it easier lets ignore the cable modem as router and ill find the printer another way of connecting but essentially i need the two other routers for two ip addresses. One for the first router with my regular IP and then the other is for VPN IP.
View 3 Replies
View Related
Apr 7, 2013
We have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.
Here's the equipment I'm working with:
DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U
I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.
View 1 Replies
View Related
