I've been having problems with the router portion of my cable modem router. I have a brand new router that I would like to use rather than the crappy router that is part of the cable modem.The problem is that I'm not able to get online no matter how I set the settings. I have disabled DHCP in the cable modem router and am connecting this to the router thru the internet port of the router.
View 12 Replies
Im trying to setup a cable modem which is also a router that has a printer attached to one of its lan ports. From there it connects to another router which connects to other clients from there i have another router with a VPN connection with other clients. I would like to be able to see everyone on the network. How do I setup the routers in particular the router with the vpn which is the last router. Also the vpn router is connected through its WAN port to the router ahead of it at its lan port so it can use its VPN connection.If it makes it easier lets ignore the cable modem as router and ill find the printer another way of connecting but essentially i need the two other routers for two ip addresses. One for the first router with my regular IP and then the other is for VPN IP.
View 3 Replies View RelatedI have one interface setup to a Cisco 2921 router connected to a Cable modem.DHCP is on the 2921.when I connect to the ssid for my guest i'm redirected to the authentification portal 1.1.1.1 .i'm putting valide credential and when pressing the submit button .. it just go anywhere.
I have setup another SSID with a psk and it's working fine.. getting ip and able to browse internet.From what i have read... it's apparently DNS issue on my router.. but what should I check.
I recently switched from dsl to cable. I have a e2000 router that I would still like to use. The modem I have is a Motorola Surfboard SB6121. It has no options that I can modify. The modem has a built in DHCP server. However, I can't modify it and I don't like the ip configuration it uses. For the time being I have the modem connected to a switch which is working fine. What I would like to know is how to configure the e2000 to use the modems connection. I used PPPoE for DSL and had login information.
View 2 Replies View RelatedHow to establish two different routers with seperate networks to a single cable modem?
View 3 Replies View RelatedI can't seem to setup my WAG120N modem.I kept on getting the error "your ethernet cable does not appear to be connected properly" even though I have connected all the cables correctly. I can access the modem through the browser via 192.168.1.1 though.I thought the setup is supposed to be simple but I have wasted few hours.
View 1 Replies View RelatedWe have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.
Here's the equipment I'm working with:
DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U
I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.
I have two ASA 5505's. One is currently setup as my firewall connected to the Cox Cable modem and wireless AP. I have another ASA that I would like to use, I have an idea that I could set that one up as a VPN unit, but not sure how I could do that. If that is not an option, can you provide the command line instructions on how to setup the VPN via the console cable. [code]
View 1 Replies View RelatedWondering if there was a way to disable all internet in a household without actually turning off the modem/router. What im trying to do is disable all internet to my desktop computer, THROUGH my laptop. This accounts for lan and wifi.
View 1 Replies View RelatedI can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?
View 1 Replies View RelatedI have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies View RelatedI'm switching to cable internet service instead of DSL. My Netgear router will not work with my cable modem; but it works like a charm with my DSL modem. Is it a problem with the router setup? Good thing I still have the DSL service.
View 3 Replies View RelatedI brought a router TP-LINK TL-WR741ND . I have an usb modem which has no other port as lan . I have only one ethernet lan controller which is integrated .Now With the mentioned device above can i setup my router , so i can use the internet on other wifi device.
View 2 Replies View RelatedIs there any way to disable WPS feature on my WAG120?
View 1 Replies View RelatedLinksys WAG54G v1.2 adsl router firmware: 1.02.7
how do I disable SIP ALG on this router?
I have a wag160n and would like to disable the wireless and use as a wired ASDL modem. I can't see any obvious settings I'm the setup or buttons on the unit but was wondering if I were to set the DHCP to disable if
View 4 Replies View RelatedI have a pc running windows 7 connected to a broadband modem. From that modem I have a LAN cable running to another building plugging into a wifi router. I have 2 pcs running xp plugged into this wifi router. (they can see each other)Is it possible for the 3 pcs to see each other on the network?The only way I got it to work was if all pcs were connected to the same modem. However to save running super long cables for each pc I want to run just one between the modems and then plug all pcs into that wifi modem which is close to everything.
View 3 Replies View RelatedI want to setup SQL Server on my internal home network, and make it available to my colleagues.
[code]...
Win 2008 Server with SQL Server.What do I need to do to allow my colleagues to connect to the SQL server from their computers, in their offices (not on my network)?For example, because I have a DHCP address from my ISP, do I need to use something like DynDNS to track my IP address?
I've got a a tp-link TL-WR741ND, but I don't have a ADSL2+MODEM ROUTER, (ADLS MODEM). Instead I've got a orange usb modem, how can I install the device?
View 2 Replies View RelatedWe have three laptops in our house. We are set up with internet that gives me a direct connect and up to eight wireless devices. My son and daughter-in-law use the wireless and I use the direct connect. M son added a router (which I have no idea what that does) and set up networking on his computer (which I also have no idea what that does). When I am the only one on the computer, it flys. When either of them get on thiers too, it slowes a little. When both of them get on, I might as well get off because it can take up to three and a half minutes to load a page.
View 3 Replies View RelatedI bought the DIR 655 to put into our network as the Netopia wireless fails to connect even though we have maximum signal strength. Att advised that buying a third party router would solve this problem.I did manage to almost configure the DIR 655. I would have to connect it to the system to test it[CODE]
View 5 Replies View RelatedI'm going to buy a WAG320N router modem.I've read the manual but I haven't found an answer to the silly question: is it possible to completely disable wifi, and surf in internet using the 4 lan port only?
View 2 Replies View Relatedour kids at home always hugs the internet at night time, which is way past their bed time. i have been trying to disable their internet connection during night time only. im getting concerns what their watching at night or who their chatting with at 3am
View 4 Replies View RelatedI have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies View RelatedWith this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies View RelatedIs there a way to quickly disable Wi-Fi on a N-150 from the router setup page? I have looked on my admin page but I don't see it. I just want to be able to turn the radio on and off from the PC that is connected via ethernet.
View 3 Replies View RelatedLast week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.
View 5 Replies View RelatedWhat the best/fastest cable modem/router device is? I currently have a motorola surfboard sbg6580. It works good, but it interferes with my direct tv so I can't use it and need to find another....
View 3 Replies View RelatedI bought an ASUS Black Diamond Dual Band Wireless-N 600 Router (RT-N56U) to upgrade from my older router but I'm having a problem: It won't connect to my cable modem (via the WAN ethernet port), so I can't connect to the internet. [URL]
When I connect the router to my computer via ethernet cable, the light on the ethernet port of the router comes on (an orange LED light), but when I connect my cable modem (or computer) to the the router through the WAN ethernet port, the WAN port's LED does not come on at all and I keep getting an error message on my browser saying that I need to make sure the ethernet cable is connected.
I've tried three different ethernet cables, including the one that came with the router, with no luck (WAN LED lights never come on, so I assume that this means that there is no activity at all). I've also tried cloning the MAC address, restoring to factory default, updating the routers firmware, and holding the reset button on the modem for 15 seconds, among other things.
Also, something that might be worth noting: While one end is connected to my modem, if I plug the ethernet cord into one of the 4 ethernet ports on the router, the green LED instantly turns on but, as I said before, there's no activity when plugged into the WAN port. My modem is an Arris TM052G (DOCSIS 2.0) provided by my ISP, Time Warner Cable.
My New comcast cable modem will connect to the internet, as i am connected to it by ethernet right now, but my netgear router will not recognize it and get a link to the internet to get my existing LAN back up.
View 3 Replies View RelatedI have cable internet can I use 2wire DSL router/modem with cable internet? I need to do wireless in my house?
View 1 Replies View RelatedI updrade my wireless router from 54 mpb to 150. Now my pc/router isn't connecting to the modem. How do I correct
View 1 Replies View Relatedi'm trying to connect to my wii n my laptop. i have a cricket broadband hookup to desktop.
View 1 Replies View Related
