Id like to keep private the fact that im using a Dlink router, for exemple, if someone tries to connect to my network they will be directed to a page with something like,d-link error page Oops! The page you requested is not available
Where can I delete this function, so that there is no page at all shown ?
I am having a problem with my router disconnecting every time that I close a browser window. I am pretty sure that it is a problem with either my Desktop or my WiFi usb card that is connected to my Desktop. I have tested this on my laptop and it doesn't seem to have the same issue. Has any heard of this or does any have a solution to how I can get this working correctly?
View 3 Replies View RelatedMy Motorola 850G router is several years old and working fine. However, my wi-fi connection is presently "unsecured" and I need some assistance as to how to go about setting up a secure network. My browser is not recognizing the router's default IP address.
View 1 Replies View RelatedIs there any way to access the USB storage I plugged into my router other than using an Internet browser? I was hoping to use it like any other drive on my system.
View 3 Replies View RelatedI have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?
View 9 Replies View RelatedAny replacement bracket or some other way to easily mount the 942l in a window? i have a long window next to my front door i want to just stick this someone about shoulder high in that window looking right to the door so will see anyone who comes.
View 5 Replies View RelatedI work for a company where we just put up a DCS-920. We're an IT company so always at our computers. I have everybody logged into the ip webpage to see who's coming in/out. Any function or similar to a windows gadget that can be made for the camera? So it's basically part of your windows desktop, don't have to open/close it all the time
View 2 Replies View RelatedRegion : Others
Model : TL-WR740N
Hardware Version : Not Clear
I seted up router and i coud acces the utility window, then i switced from w7x32 to w7x64 and then i try to acces the utility window i can only see.Username or Password is incorrect.Is the "Caps Lock" enabled on your keyboard? The username and password must be lowercase, please ensure that the "Caps Lock" LED is disabled on your keyboard and try again.Forgot your username or password? Please reset the device to the factory default settings if you have forgotten your username or password. The default username and password are both set as "admin". The settings will be restored to factory default after the resetting.
How to restore the device to the factory default settings?Firstly locate the reset button on the rear panel of the unit, whilst the device is powered on press and hold the reset button for more than 5 seconds, the device will then reboot and restore itself to the factory default settings.no pop up window appears i tried looking this up and the closest thing i found was to un-check the proxy but its not checked so what should i do to be able to access utility window?
As DCS-942L IP cam is compatible with "NVSCGI APIs" (search this string on a search engine and you will find some useful PDF docs), many features of this IP Cam may be enabled or disabled using any web browsers, for example we can manage the motion detect.
[url]....
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : V2
ISP : Reliance netconnect Vendor (ZTE Model AC2736) CDM
Region : India
Just now I bought this router. When I am trying to configure it with default firmware is not identifying the modem itself. So Afyter facing this problem, I updated my Router firmware(TL-MR3220_v_2_120822) and retry the process. But this time, It identified the modem for few seconds, then its changes its trying to connecting, after that its change it state to unplugged.
My router is showing two separate SSIDs, dlink and dlink 2 it only recently started doing this and around the same time my router has been constantly rebooting when there's little or heavy internet traffic.I have a DIR 655 Hardware Version: A4.Firmware: 1.21 NA
I refuse to go to any version above 1.21 as 1.21 is the most stable firmware for the 655, I have tried all other with terrible outcomes and wireless performance.I've looked around and most people think it's a joke or something, always saying it's probably a neighbors wireless, but that's impossible since I'm on an acreage and my neighbors are too far away for us to be receiving their wireless signals, and if I change the password and encryption type (WPA/WEP/WPA2) I have to change the security settings on both dlink and dlink 2.
Also I have the normal 192.168.0.1 gateway to access the router under the "LAN" section under Status on the router, but under WAN I have a completely different gateway that just recently showed up. I have no idea where this came from or what happened.
So network was running fine for about a year or so. Network consists of 1 Motorola SB6120 cable modem attached to a D-Link DIR-601 wireless router. All settings were default except for SSID and WPA password. One day I just couldn't access internet anymore. I've narrowed it down to the default gateway that is being given out through DHCP. The default gateway that is being given out is the IP of the modem (192.168.100.1) and not of the Router (192.168.0.1). I can't find any option on Wireless router to be able to force the gateway address when handing out the gateway IP. Theoretically I thought I should be able to put router on same subnet as modem as 192.168.100.2 but that still doesn't work. If I set the IP adresses statically on the PCs and give it the Gateway of the Router everything works fine. I should mention this is for my boss' house and basically I dont want him calling me everytime he has a friend come over and I have to talk em through setting up a Static IP.
And just for an example this is what I get if I use DHCP:
IP Address: 192.168.0.155
Mask: 255.255.255.0
DNS: 192.168.0.1
Default Gateway: 192.168.100.1
And If I want it to work I have to change the default gateway to 192.168.0.1 I've tried updating routers firmware and reset to factory default numerous times. Is it possible for a router DHCP stop working?
I'm not sure if it's different when you log in remotely via mydlink, but by using the web based interface localy (by ip address) I can't find a way of exiting full screen option under live view. I tried the obvious escape button. Right-clicking does nothing, and double clicking actually makes it truly fullscreen (aspect ratio gets stretched to my monitor 16:9 btw, instead of retaining 4:3.So is there a way to exit? Using chrome, maybe it's a chrome issue and it works differently in other browsers but I see no mention in the manual of exiting fullscreen.
View 4 Replies View RelatedI run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.
View 1 Replies View RelatedI have a D-Link 655 router. When I access it through my browser, and say I go to the advanced tab, most of the time when I click on any link in any settings it automatically brings me back to the 'login' screen. Once I log in again, then it takes me back to the status screen. For instance, I just logged on. Then I went to click on the 'tools' tab. I do, and it takes me back to 'login' I do, and then back to status.
Also, I have hardware version B1 and Firmware version 2.00NA I see downloads for firmware 2.01NA and 2.03NA under support resources. But my router says my firmware is up to date at 2.00NA. Should I be updating the firmware as it shows on the website?
I have have my Dir-655 set up as an access point for awhile and would like to change the wireless access code. I can't seem to figure out how to access the setup menu while it is an access point to do this. How I access the router when it is set up as an access point?
View 4 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :
I am trying to work out how I can use the WR702 to connect to a Hotel's wireless connection. As with most modern hotel setups, the hotel requires the user to access a web browser and enter the room number and select a purchase plan.I believe there must be a way that I can connect the WR702 to the hotel's network and then use a browser on a linked (wireless or ethernet) laptop to launch the browser and log in, however, I have tried every default configuration on the WR702 and cannot find a solution.
Setup:
WR702 router
HP EliteBook 8440p laptop (ethernet and wifi available)
Hotel wifi (multiple identical SSIDs in the survey but shows as a single wifi name on my iPhone)
How can I configure my hp window vista laptop to router?
View 4 Replies View RelatedI have DSL with a Westell 6200 modem configured to a Linksys wtr310N router. I configured "Bridge Mode" on the modem and configured the Linksys with PPPoE. When I try to log in with my laptop running XP I am connected and everything works great. I also can connect wired to my Windows 7 laptop but I can't connect using wireless. Are there any tricks to make this work on Windows 7? Do I have to set up a new Broadband connection? How does my laptop connect to my linksys router?
View 5 Replies View RelatedI cannot telent to 1941 router from a Window 7 PC and I can a Window XP PC. Telnet is enabled on Win 7 PC. I upgraded 1941 to latest IOS.Compters running Windows XP can telnet to router and hit the internet. Computers running Windows 7 cannot hit the internet. I replaced the 1941 with a 1760 router and Win 7 computers can telnet to router and hit the internet. I used the same config from the 1941 on the 1760.
View 5 Replies View RelatedWe purchased an EA6500 to take the place of the router function of a Verizon Westell 7500. We bridged the Westell, installed and set up the EA6500 and everything seems fine.
What is strange is that some devices on the network (our server, user PC, a NAS that isn't part of the domain) while accessible if you navigate to them via \ do not appear in the Network window.
This of course is causing issues for some users who don't or won't map network drives.
At first I thought this may be an issue related to us having some of our network devices with static IP addresses so we switched them over to dynamic - no change in the network window.
we will have to return this router and get a different brand/model if it won't work in this fashion.
Last week I purchased the E4200 and for simplicity, I configured it with basic settings using Cisco Connect. Today, I went into the web interface. The only thing I did was review settings and get the Routers PIN (it appears that Intel Chipset cards on Windows requires this PIN?) Close the browser (did not save any settings) and now I am completely locked out of the device. Cannot connect does not accept the wireless password. I hard reset the device, ran through the wizard. Everything was working again. Launch the browser and connected to the device closing window and balm?
View 9 Replies View RelatedI've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies View RelatedI just installed my new E4200, and am setting the Access Restrictions. Is there anyway to block the popup window that displays every time I enter the form or save the settings?
I'm using IE9 and have tried adjusting the Popup Blocker, but to no avail.
Is the WPS of DIR-655 turned on by default?
View 14 Replies View RelatedI have a scenario which i would like to discuss with you people. I have a branch office connected with the Head office using wireless radio bridge(point to point connectivity). Here is the configuration at branch office.Things are working fine until now. The branch office has a DSL internet connection and required to be shared among the users. option 1 (problem)DSL terminate on swtich and all clients have a DSL modem as their default gateway and ISP's DNS. Internet works fine but here comes the problem, now they lost the connectivity with head office.Now my question is i cant have two default gateways then what should i do?
I bought dlink dir615 router and want to configure in such a way that internet terminate on dir 615 and branch office pc's should be able to use the internet as well as get connected with the head office with default gateway configuration.
I have my desktop using a TP-Link WN722N USB wireless adapter to connect to my modem router. I get to browse for about a minute before I get dropped. Windows Network Diagnostics tells me that the problem is that the Default Gateway is not found, and then restarts the Wireless adapter, reconnects, then the cycle of browsing for a minute and disconnecting continues. None of my other computers that are wireless are facing this issue. I have the latest drivers for the wireless adapter. I have Microsoft Security Essentials installed. This is the ipconfig /all when it is connected to the internet.
[code]....
I wonder how i can restore my router to its defalt settings if my reset button is broken and the router has lock the mac of my pc. Can i connect the router to my pc and access it from it?
View 7 Replies View Relatedchanged the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..
View 8 Replies View RelatedMy DIR655 is about a month old, works fine but randomly resets to factory default (loses configuration). Used it to get internet from an existing wired connection with gateway 192.168.0.1, therefore changed Network address of Dlink to 192.168.1.1 to make it work. Every so many days of working ok, it suddenly resets to factory default with no one touching the reset button. Have to restore the configuration from saved file which is a hassle.
Although the DIR655 is connected to a UPS, it shouldn't lose the settings during blackouts right?
How can I change the camera name form the default which is the same as the model name
View 1 Replies View RelatedWhat would cause my Dir-825 to magically revert to it's default settings? This is the 4th time this has happened.We rely on a Verizon Network Extender for phone service. It requires an internet connection to function. When the router brain-farts, we don't have phone service... and we don't know it until we try to call out, or try to use the internet. We went to bed last night with the router working and woke up to it not working. It's just my wife and I here. I haven't seen the dog showing any interest in jacking with our computer gear.
When I access the setup utility and go to Manual Wireless Network Setup, the Wireless Network Name has defaulted to dlink, and Security Mode is None. I have to re-enter my personalized setup info, (because that is what our computers are looking for), then all works fine again.I'm a savy XP user, my wife has Vista (yuk) (she doesn't know any better; her daughter installed it).We are Comcast customers. We own a Linksys CM-100 modem. (When I connect direct by hardwire, (i.e. bypass the Dir-825 router), from the modem to any computer, or the Verizon Network Extender, they function just fine. Setup utility for Dir-825 says we have Hardware Version B-1; Firmware Version 2.02NA.
Set Firewall settings to Endpoint Independent for TCP and UDP. I see other posts addressing similar issues of reversion to default settings... but there don't seem to be any clear resolutions of these issues. On 2010-03-11, gunrunnerjohn posted, "I think there may be a shadow file that's actually in the FLASH that needs to get written back to make the changes stick. I seem to recall there is a command to sync the RAMDISK copies to the FLASH." Yet there is no more to this thread.
I would like the ability to change the default password. Currently, when I change the default password and save the config via the web interface, neither the original password, or the new password work. I am forced to reset the device to the default config to regain access to the device.
DCS-930L firmware 1.04 and Mac OSX 10.5.8
