Dell :: 14R N-1030 No N Protocol Connection
Dec 6, 2011
The Intel N-1030 just refuses to connect at N protocol. Its almost as if the N protocol has been disabled waiting for a real fix from Intel.
I have updated firmware, etc., for router. I have several N devices and ALL connect easily and quickly. I gave up for now on the Intel WLAN N-1030 and bought a Netgear N mini-usb dongle device. With coupons it was about 10 bucks at Staples. Popped it in and what do you know, connected at N in a blink of an eye.
If Netgear can get a mini-usb N device to work properly Intel and Dell? I have set everything as suggested, power to max, router channel to auto, etc. Why no selection for wireless mode b/g/n in driver but only the 802.11n mode option?
Something is not right with this driver and implementation of the N-1030. At some point Dell is going to have to step up and provide us with what THEY advertised as the hardware we purchased. Selling a device with N protocol wireless when in reality the N protocol does not work is going to be on Dell, not on Intel.
View 3 Replies
ADVERTISEMENT
Dec 31, 2012
I'm having problems connecting to the Internet using the wireless adaptor - it will connect initially but the connection is very very slow and then will eventually drop out and stop working.When I connect using an Ethernet cable, there are no problems whatsoever so I know it is not a service provider issue.I have updated the BIOS to A11 and all drivers are up to date. The wireless adaptor is Intel Centrino Wireless-N 1030. [code]
View 3 Replies
View Related
Nov 16, 2011
i cant activate the hard Wireless N 1030.The interface activate many seconds and desactivate im self .
View 1 Replies
View Related
Mar 24, 2012
I have an inspiron, with an Intel Centrioun Wireless-N 1030, that I purchased new just two months ago. I just recently starting having trouble with the wireless internet connection. I am able to connect 95% of the time, but then I cannot load one page. Occasionally, it will speed up and I have a good connection for a few minutes, but then I lose it again. It happens on battery or cord, with two different networks (one large school network and my home network). It doesn't happen if I am on a land/wired connection. The two other computers in my house, two and four years old, are having no trouble with the wireless connections. I have been using the current modem at my house since i bought the computer. Today, we reset the modem to factory settings, with no change. We also did several ping tests and had a 9% failure rate pinging th modem. I have also changed it to run at max power all the time and disabled the option to turn off when lower power, with no change. I have also attempted to update the driver through the device manager.
View 10 Replies
View Related
Sep 16, 2011
I have just taken delivery of a new Inspiron N5110 with an Intel Centrino N-1030 wifi card. I also have two dual band routers (LInksys WRT600N) in different locations in the house.
My problem is that the laptop is detecting my routers Wireless-G signals but NOT the Wireless-N signals. I have checked to ensure that the N-1030 card has 802.11n Mode set to Enabled and have also tried both setting under "802.11n Channel Width for band 2.4" (i.e. Auto and 20 MHz Only) with no success.
My routers are configured with the Wireless-G signal only on 2.4 GHz and Wireless-N only on 5 GHz. I found this to be the best setting to avoid interference from neighbors wifi and cordless phones and have been happily using Wireless-N with my other Dell laptop with no problems (XPS M1530 with Intel 4965agn wireless card).Does the N-1030 card not work with 5 GHz Wireless-N?
View 2 Replies
View Related
May 20, 2011
I saw some other mentions online of intermittent internet connectivity using the factory-installed Intel Centrino wireless-N 1030 card on various new Dell computers running Windows 7, but didn't see any resolution to the problem.
I can connect directly to my router via an ethernet cord, but trying to use the wireless card gives me intermittent connectivity. I will pretty quickly lose the ability to load a new page if I'm browsing with IE or Firefox, and can regain it (temporarily) by disconnecting/reconnecting or letting the wireless manager troubleshoot, during which it resets the wireless adaptor. Doing a continuous ping of my router gives me anywhere from 30-70% data loss and lengthy round trips (I am currently one foot away from the router). Other (ancient!) computers work fine on my router; I have updated the router's firmware/reset it many times, etc). I didn't specifically go download a new driver for the wireless card, but going into its properties and having it search for an updated driver results in it reporting it already has the most up-to-date driver.
I spent a lot of late nights talking to Dell support, and their eventual fix (after a complete reinstall from the factory setting partition) was to set up my home network as a WEP, which I'm not happy with due to it's poor security compared to WPA2/WPA. This appeared to resolve the connectivity issue (why??). But I feel like I should be able to use WPA2 security with a brand-new laptop. So I changed it back to WPA2/WPA and tried installing all the critical updates that Windows Update could find, including SP1, and then looked at some continuous pings of various webpages and of my router itself.
Then I noticed my ping round trip time was awesome and they were 100% successful while my computer was plugged in with the power cord, but this unfailingly changed to reporting unsuccessful pings and having 1000ms round trips as soon as I disconnect the power. Seems like the on-battery power settings are starving the wireless card?
Also, I'm sure my initial intermittent connectivity (before the complete OS reinstall) was still occurring while plugged in with the power cord, so I'm not sure if the reinstall fixed some aspect of the problem, or whether the appearance of success while plugged in now is just temporary. Perhaps my card is just bad and I need a new one? I'm using the factory default power settings and the factory-installed wireless card (and I couldn't choose a different wireless card when I built my laptop)
View 53 Replies
View Related
Oct 15, 2011
The wireless on my laptop keeps dropping out. When I first got it it was fine, but after a while I started experiencing problems on every wireless network I connected to. Most of the time it would connect, but after around 10 minutes or so, the connection would drop out and the wireless card has to be "reset" so I can connect again. Otherwise I have a little yellow triangle over my network signal strength bars. I've updated to the latest drivers (14.2.0.10) but it was no luck.
This happens with every wireless network and I know it's not the network because my old Vostro 1500 is running just dandy on all of them.
View 7 Replies
View Related
Jun 2, 2012
Well I'm typing from my tablet right now because for the 20th+ time, the Centrino 1030 card on my Vostro 3450 isn't connecting to hotel's wireless. Other places I have encountered it to have connection problems is colleges, universities, coffee shops, etc. It is also slow as molasses in my home too.
I have read other posts indicating similar problems without resolutions on the Vostro 3450. I am planning on replacing it with the BEST WLAN card there is. It seems a bit labor intensive from the service manual but doable. Has there been any "for sure" fix with the 1030 card?
The 1030 card is so incredibly bad that I am able to get 3/5 bars on my home network being outside while my Vostro can't even pick it up.
View 2 Replies
View Related
May 24, 2012
I own an Inspiron n5110 laptop(Dell) with an Intel(R) Centrino(R) Wireless-N 1030 wireless card. I use Windows 7 Ultimate 64-bit. I constantly drop internet connection, mainly when downloading and playing games. In the right bottom corner, where my wireless connection signal strenght is showed, I get an yellow triangle with '!' mark in it saying 'Limited access'. When troubleshooting, the only way to get an internet connection again, I get an message 'The default gateway is not available' and it says that it's fixed. after awhile I lose internet connection again and everything repeats. I figured out that it's not from my router or Internet Service Provider. I saw in the forums the option to exchange this card for the 6230 upgraded version but that is not a variant for me because in my country the technicians can at very damage the laptop.
View 7 Replies
View Related
May 16, 2012
My laptop has Intel(R) Centrino(R) Wireless-N 1030 internet card but the computer can not connect to the modem properly, the speed is always not the speed that I purchased
View 1 Replies
View Related
Apr 25, 2013
I'm trying to run an OSPF protocol over an ATM connection:
192.168.80.0 |----10.0.0.1-----------10.0.0.2----| 192.168.50.0
View 1 Replies
View Related
Nov 22, 2011
I have cable modem (one of those Motorollas), ehternet cable connected to desktop pc (usb would be probably the same), Windows7 - host, Virtual Box -> CentOS6 - guest; no static IP, no router.I am trying to connect guest and host together and both to the Internet, there are suppose to be 3 ways to do that:
1) Adapter 1: Host-only adapter + Adapter 2: NAT; I've been trying to get it to work for a while now, but I cant; here is some info: VirtualBox Configuration (no IP for the guest? I've seen it there before though, so there might be a way to do that)
2) Bridged adapter; I think that the only way to do that is with a physical router at home or office etc; VirtualBox 4.0.2 Network Connections in Windows 7 - YouTube
3) NAT and port forwarding; I think this might be the only option, here is some info: url...
View 2 Replies
View Related
Jul 11, 2012
Have been battling a router connection to new ATT t1 connection. Router was configured and sent from sister company to this new location. We have had ATT tech test circuit and it tests good, had cat5 cable tested from ATT to router, it tests good. I continue to get serial up/ line protocol down status though and cant communicate to it from wan.
View 4 Replies
View Related
Nov 16, 2011
I have a 3845 router. Setup SSH Version 2generated rsa keys (1024)set login localtransport input ssh and telnet is enabled since I can't get ssh connection working When I connect using SSH, I get the following error. server refused authentication protocol.
View 21 Replies
View Related
Jan 3, 2008
I am having problem to configure WLSE1030 Second thing if I configured something via web browser it is not getting erased.
View 2 Replies
View Related
Feb 13, 2011
I have a WLSE Express 1030 which is not booting. The error is "GRUB loading, please wait... Error 17". The error is a mount error for the partition. I don't have a recovery disk and I am not authorised to download the disk.
View 1 Replies
View Related
Jun 15, 2012
The problem is that it always stays around 121-150mbps and sometimes 270mbps(beside router). here is my wireless settings on my router
router setting 1: [URL]
router setting 2: [URL]
network card setting:
802.11n channel width:auto
802.11n mode:Enabled
Ad-hoc channel:11
Fat channel intolerant:Disabled
Roaming aggressiveness :Medium
Throughput enhancement:Disabled
Transmit power:Highest
Wireless mode:802.11a/b/g
View 9 Replies
View Related
Nov 1, 2012
I recently install Windows8 Enterprise build 9200 on my Dell XPS L502X and everything is working fine so far except my modem. In device manager its installed properly but the network manager doesn't list it as an option to connect to (as it usually would in win7),
View 2 Replies
View Related
Mar 17, 2011
My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies
View Related
May 29, 2011
I want to know how to use ICMP protocol in sending a packet in a network ?
View 1 Replies
View Related
Feb 9, 2013
Can we implement BGP without IGP Protocol ? If yes, then how can we do it ? If no, why ?
View 11 Replies
View Related
Jan 26, 2013
I am encountering a problem with location of website i.p address and its port
[code]...
View 4 Replies
View Related
Sep 3, 2012
I want to know the CAPWAP protocol.
View 1 Replies
View Related
Apr 19, 2011
what's the standard protocol to transfer R2 to SIP?
View 1 Replies
View Related
Nov 9, 2011
I have a 2801 router. The Fa0/0 int shows up/down. I have plugged it into diffrent cisco and non cisco switches and even a cross over cable to my laptop. I cant seem to get the protocol up. I have changed the speed to 100 and duplex to full to try to get it up that way and nothing. [code]
View 7 Replies
View Related
Dec 7, 2012
After starting WIN7 on my DELL Studio XPS8100, no connection to LAN is to be seen ( network symbol shows "!" ).The system shows this behavior in nearly 80% of starting attempts.
Click on network-symbol the network installation center shows :
computer (STUDIO ) ----------------some networks -------------X--------- internet
after "DEACTIVATION" of this public network and clicking on solving Problems / network diagnostics the result line shows : "LAN connection" is not active. After click on "Repair", the process leads to a fully functioning LAN - Process.
The Home-network is running ( not the public network, I don't need ). This is correct ! Next time , when I start the computer, the same procedure is necessary.
View 7 Replies
View Related
Sep 15, 2012
Im using a Linksys router, when I connect my Dell XPS 14z to the router wirelessly the connection drops out, the DSL and Internet lights go off and re-connect 5 minutes later creating an endless cycle. I'm not sure if it's the laptop settings or the router settings.
Using my mobile phones/xbox360/Alienware m11x the connection is stable and it doesnt drop out, using the XPS 14z makes it go off.
I've updated my network card drivers for the XPS 14z; i've kept playing around with settings on both the laptop and the router but no success?
View 1 Replies
View Related
Feb 9, 2013
I have a 1 1/2 year old Dell XPS 15 L502x laptop.I have noticed that it has started having network connection issues with the wifi. It connects to all wifi properly but seems to be having issues with the home router recently. Around November 2012 it started. However I fixed the issue then by re-installing the driver.
This time reinstalling the driver did not solve the problem .. I have tried using the driver from intel's website as suggested by a previous forum post on a similar issue. I have alos tried the power settings suggestions by intel and none of these have solved the problem.
View 1 Replies
View Related
Aug 26, 2011
Protocol 41 with ipv6
View 1 Replies
View Related
Jan 26, 2013
I was working on a problem the other day and came across something that I had seen before but never given much thought. I had a router with a switch connected to it and the interface was showing as Ethernet0 is up, line protocol is down. The problem in the end turned out to be a cable that had fell out because it was not connected correctly, but I was able to replicate this interface status on a router (FastEthernet0/0 is up, line protocol is down), and NO cable was attached to the interface.I've had a look on the internet but cant seem to find a good answer, so does anybody else know why this status is shown on the router? Remember, NO cable is connected to the interface so it isn't a speed or duplex problem
View 5 Replies
View Related
Oct 14, 2011
I'm having is that every few hours my TCP/IP protocol stops working. The modem lights remain normal but I can't connect to anything. The only thing that works on the internet is traceroutes at the command prompt which function normally. The solution is that I have to reboot and then everything returns to normal until a few hours later when it happens again. There are no error messages on any of my browsers. The page just goes white immediately. When I try to retrieve my email, I get a message about the TCP/IP isn't working.
View 9 Replies
View Related
Apr 18, 2013
I'm looking to make a possible configuration for a customer. They need a device to provide :- firewalling- bandwidth limiting based on protocols, IP, users- web content filtering- good reporting to see which device/users are consuming most of the bandwidth.I used to use cisco ASA as firewall but it's a while I last installed on and I'm nt uptodate which current state.So I thought of using an ASA 5512-X but I'd like to know if it comply with all the requirements .Most important being the reporting and bandwidth limiting capability. It would be great to have some configuration example regarding bandwidth management.
View 1 Replies
View Related
Sep 7, 2009
how to bring this interface back up? It's a 1252 with 80211.n.I started configuring it with CLI and then was using the web interface. I made a change on the web interface and it caused the AP to hang. I rebooted it and can access via Hyperterminal, but I cannot ping the IP address nor bring it up in the web interface any longer.I tried the "No shut" command in the BVI1 interface.
View 4 Replies
View Related
