Dell :: Studio 1555 Will Not Pass Authentication With D-Link DSL 2750B Router
Jul 1, 2013
I am probably missing something so obvious, but I have been working on it for three days. I received a new modem DSL 2750B and have it LAN wired to my Dell Studio 1555. I asked my techy step son to hook it up to wireless while I was away. He could not do it and worked with Verizon to create a home network changing the SSID and WPA Key. They spent about a hour together on line and could not get the wireless to work and Verizon said its a problem with the Studio 1555.
So, I have been working on it since and can not fix it. The Studio is out of warranty and I have Windows 7 Home Edition. I spent a day and a half to finally get the Function F2 button to work and turn on wireless. This was only possible after downloading the Dell Quick Set and now the Radio On button shows in my Windows Mobility display. I checked my BIOS and Radio, WiFI, and WAN are all enabled.
When I boot up I can see the wireless network showing as available and at excellent strength. I click it to connect and it fails authentication. I ping the router at 192.168.1.1 and it shows both wired LAN and wireless LAN connected. So, I go to Wireless and go through the push button method of signing on to the router, pressing the WPS button on the router. It "spins" for 120 seconds and says fails enrollment.
I am thinking that I should have my laptop and router all reset and eliminate the network Verizon and my step son set up. This would give me a clean start and I can use the SSID and WPA key that came with the router..but, I'm not sure that is it or am I missing something else.
Mine studio 1555 with intel core 2 duo P8700 [URL] processor and intel wifi 5100 agn card stopped connecting to router since last week. After searching a lot I found out that the Intel has stopped supporting 5100 for windows 8. Is there any way possible to use the same adapter with compatibility drivers on windows 8?? I have searched a lot but couldn't find much. All the new intel cards like "Intel Centrino Wireless-N 2200", n6300 are of 22nm while my processor is of 45nm. So will the newer card work with my processor.
my laptop is getting connected to wifi as well as wired networks but I am not getting any internet access on them.I m facing this problem from last 6-7 days.
also I have tried the solution which were given on the previous forums and I have mcafee antivirus but the "no connection problem" is not related to the recent mcafee problem.
I have Dell Studio 1555 model laptop. Earlier I was using Windows 7 Home premium 64 bit. Dell(TM) Wireless 370 Bluetooth Module was installed and It was working fine. Recently I installed Windows 8 Pro. Since then Bluetooth is not working. I don't know which driver to install.
Went to use the computer today, and no wirless internet.
My computer:Dell 1555 studio w/intel centrinoVista 64 bit
Symptoms: Can't find wireless connectionsCan connect if directly wired to router. When I press F2 there is no wireless tower like before, just bluetooth symbol
Things i've tried: Re-installing all drivers/software. Reset to factory settingsWould really like to get my wireless running again as I need it for work
I have a Dell Studio 1555 and normally my wireless connection works perfectly. It runs on Vista and I bought it in August 2009. Just recently I went to a friends house, and my wireless detected their router, but where normally it shows connection signal bars, it showed a red 'X' and wouldn't allow me to connect. It wasn't their router because their wireless on their computers were connecting to it fine. Then I went back to my house, my wireless was working fine, and connected automatically right away. The next weekend I went to my parents' house, where I have brought my computer and was able to connect to their wireless countless times in the past, did the same exact thing as when I was at my friends' house. Normally it will detect their router by their name because that is what they have it set at, but now it can only detect it as linksys. And it will not connect. I have no idea what to do because as soon as I go back to my house, my computer is able to connect to my wireless
I have a dell studio 1555 and i im not able to install bluetooth setup.While installing bluetooth setup a message will be shown by saying "switch on the wireless" but in my laptop there is no switch of wifi near hdmi port.
I have a Studio 1555 64bit running on Windows 7, within the past few weeks, my wireless connection sporadically turns off, the wireless router is ok, I can connect wifi to my phone. My computer does not recognize any wireless networks, although there are several in the neighborhood. Sometimes it randomly comes on.
I've a Dell studio 1555, windows home premium, 4 gb ram, 320gb hdd. Till yesterday everything was fine, all of a sudden my laptop stopped connecting to internet through wireless.I have tried it in safe mode. I have tried to delete the network also but now that left me with inputting the password everytime I want to connect. Its showing all the networks available, and it shows connected. but there is a triangle on the signal. When i disconnect and connect it again, then i get an error saying "windows cannot conenct to wireless network". When i click on the Trouble shoot problems, its showing below
Troubleshooting has completed Troubleshooter made some changes to the system problems found problem with wireless adapter fixed.
But still it won't connect to the network. i've been searching in the internet for solution but couldn't find it. In a couple of tech forums people posted same problem for Dell studio 1555. But there is no solution. I think it has something to do with this model? I've been using it for past 3 years without many problems(except my mike is stuck with only yahoo messenger and won't work on skype/gtalk etc)I tried to download drivers from dell and install, but it gives error saying "This software package cannot be installed on your system. Setup will now exit."
I tried removing the drivers and then rebooted the system. The drivers were then automatically installed by the windows again. I went to Intel website and it downloaded a tool to my pc to check for old drivers and it found out my adapter was not having new drivers so I downloaded the drivers from there, installed them but its still the sameThis is my wireless adapter. "Intel(R) WiFi Link 5100 AGN".
Computer: Laptop Dell Studio 1555 Dual Core: W 7 64 bit, router Sitecom WL-351. Max. connection 120 Mbit. Speed normally approx 100 Mbiton the Dell desktops. Connection speed on the Laptop Studio used to be 60 Mbit wireless . Haven’t checked speed for many week but yesterday foundout that the speed dropped to 12 MB. Wired the laptop to the router, connection wend up to 98 Mbit.
Wireless again the speed dropped to 12 MBit. Checked the wireless connection with another laptop and it went up again to 70 Mbit. What could be wrong on the Studio 1555?
Cleaned the computer, no malware, Mode AP, Channel 11, WPA2
The card Broadcom driver 10-01-2008, version 5.30.21.0
The card works but the 12 Mbit should be at least 60 Mbit.
I recently lost network connection using the built-in Intel(R) WiFi Link 5100 AGN. Stupidly, this happened while I was still under a Service Contract, but due to the holidays, I put it off and the contract expired the middle of December. I have a Studio 17/1745, I disconnected the internal WI-fi card and use a USB D-Link N and I now have WI-fi. Should I purchase a new internal WiFi card and if so which one.
I've Studio 1555 with Factory default Windows Vista, I am using connectify software for internet sharing to other laptops, but from few days, it is not working...I reinstalled it again,Updated my wifi drivers from vendor's site, even restored my windows to earlier restore point, also I set up my own windows ad-hoc network, but this ad-hoc created network or the connectify created network, both are not found on nearby laptop's network search..my wifi adapter stopped broadcasting..although I can connect to ad-hoc or some other network
WiFi issues with his Dell Studio 1749. He has a Siemens SE587 ADSL modem/router which supports Mixed, B_only, G_only WiFi modes. The laptop has a Dell wireless 1397 WLAN mini-card which supports Loose 11h, Loose 11h+d, and Strict 11h WiFi modes. No matter what combination of modes I configure in the router and the laptop the wireless connection on the laptop only ever comes up as 1MBps or 2MBps (full strength signal, laptop right next to router). By contrast my ageing Dell Vostro 1700 always connects to the same router at 54MBps.
So I'm guessing that there is some incompabitility between the router and the laptop. We're happy to replace the router, especially as recently the ADSL side of it appears to have gone a bit flaky. I've scoured the 'net and cannot find any router which claims to support 802.11h, so (a) what should I buy and (b) how can I be sure it will work at a sensible speed with this laptop given that the one we currently have won't?
I need to order a CISCO881, only CISCO881-K9 is available.I checked everywhere, still not sure if it is enough for me. We used to buy Sec-K9.I've got an adsl modem in bridgemode in the front. As only 1 IP provided by ISP, I need 881 to be able to pass on the PPP authentication.I also need the router to have vpn server function.Could CISCO881-K9 do this or not?
I'm trying to configure Tacacs on Cisco ASR1001, and the Tacacs server is Cisco ACS v3.3, the ACS won't pass the authentication, complaining bad request from NAS, key mismatch - which I compared millions of times on both ASR and ACS sides. [code]
I havea Dell Studio XPS 8100 with 64 bit operating system, running Windows 7 HomePremium w/ Service Pack 1. I purchased the computer in January 2011.
AfterI purchased the computer I purchased a NETGEAR Wireless Router to set up aWireless connection to two Lap Top computers but since my Desktop was merelytwo feet from the Router I hard wired it to the Router with an Ethernet Cable.
Irecently moved to a new location and found that I had to connect the XPSA 8100to a Wireless Router. I purchased a newer NETGEAR 27, and had no issuesconnecting the Laptop Computers to the new Router regardless of the distancefrom the router.
WhenI attempted to make a Wireless connection to the XPS 8100, It gave me a message“Microsoft Virtual WIFI Miniport Adapter Unable to Connect with a CODE 31”.
In reviewingmy Network Adapters I found both the “Microsoft Virtual WIFI Miniport Adapter”,and a “DW1525 (802.11n) WLAN PCIe Card” Status indicated they were not workingproperly.
Iwas able to visit the DELL website and reinstalled both the Microsoft VirtualWIFI Miniport Adapter and the DW1525 WLAN Card. Now they both indicted thatthey ARE working properly. I also located two Antennae’s that came with theDesk top and I installed them on the machine.
HoweverI still cannot get a Wireless connection to the Router and I currently have thecomputer sitting merely 3 feet from the Router. I continue to receive an “Unableto Connect Prompt”.
I have been suffering with WiFi problem since last week, I am not able to connect to WiFi but all connections are visible. I called up my ISP guy to replace the modem but still I was not able to connect to. Yesterday I called up dell (my system is under complete cover), they have tried several things and I was sitting next to my internet modem It got connected. Then to be ensured I restarted the system and my laptop got connected to WiFi. When I moved bit far away from WiFi again the same issue I am not able to connect to.
I was wondering if you can use wake on lan on the studio XPS 1645.. i've been looking all over the internet but couldnt find anything usefull & the dell email option wasnt working.
I just received my XPS 16 and I was informed that it had a built in Bluetooth. I purchased a bluetooth mouse and tried to use it, but I am unable to get the computer to turn on the Bluetooth device. Had Dell support look at it, but the guy passed me off to someone else. So I still do not have this working. Is there an updated driver required to get this Bluetooth working.
I have a new Dell Studio 540. It is presently plugged into a wired router via an Ethernet cable. However according to the documentation I should also have a wireless card fitted. It should have the following fitted:
I had purchased Dell Studio 15 in 2009-2010 and before few days back i had formatted my system and installed Windows 7 ultimate SP1. Now i am not able to get the option of Bluetooth. i am sure the issue is with driver of it. Some way to reinstall the driver or make it working properly.
I had a hd crash and had to re-installl Window7 on my Studio XPS 8100. I've installed all the drivers from the dell site as well as the H57 chipset drivers from Intel. I still have 2 devices that won't install (Ethernet Controller and PCI Simple Communication Controller). I can't get on-line.
Windows 8 just released not long ago, and I am eager to upgrade my laptop to this version. From what I am understanding that Bluetooth is an issue along with Dell own drivers and configuration caused the upgrade delay. Dell will resolve and make drivers available to Windows 8.
I have a dell studio XPS, when I remove the battery, there is a slot for inserting SIM card for connecting to internet (through SIM card).I inserted SIM card and it fixed in slot and also installed Dell Mobile Broadband Card Utility, but when run DMBC, it say No Device Detected.My windows is 7 64bit.What I must do for use SIM card dongle?If my dell laptop support UMT?If no, what is this SIM card slot?
When I try to open my bluetooth software, it just keeps closing...I've tried to reinstall earlier versions but it does the same. I have a dell xps studio 16 . What other information would I need to provide for a full diagnostic?
